Preparation of Mesoporous 1,4‐Phenylene‐silica Nanorings through a Dual‐templating Approach

Mesoporous 1,4‐phenylene‐silica nanorings were prepared using cetyltrimethylammonium bromide (CTAB) and (S)‐2‐methyl‐1‐butanol as a chiral dopant in concentrated aqueous NH₃ solutions. Transmission electron microscopy images of the samples indicated that the nanorings were formed by bending nanorods 360°. With increasing the stirring speed or the (S)‐2‐methyl‐1‐butanol/CTAB molar ratio, the morphologies of mesoporous 1,4‐phenylene‐silicas changed from helical nanofibers to nanorings, and then to nano‐saddles. Circular dichroism spectra of these hybrid silicas indicated that they were chiral.     

Preparation and characterization of helical carbon/silica nanofibers with lamellar mesopores on the surfaces

Helical 1,2-ethylene-silica nanofibers with lamellar mesopores on the surfaces and twisted rod-like mesopores inside were prepared according to literature procedures. After carbonization, helical carbon/ silica nanofibers with lamellar mesopores on the surfaces and twisted rod-like micropores inside were obtained. The morphologies and pore architectures of the carbon]silica nanofibers were characterized using transmission electron microscopy, field-emission scanning electron microscopy, powder X-ray diffraction and N2 sorptions. Although the mesopores inside shrank into micropores, the helical nanostructure remained. Moreover, several carbon/silica nanofibers with lamellar mesopores on the surfaces and concentric circular micropores inside were also obtained. After being calcined in air, helical silica nanofibers with lamellar mesopores on the surfaces and twisted rod-like micropores inside were produced as well.     

以联二萘酚衍生物为手性添加剂制备介孔二氧化硅

通过溶胶-凝胶法以十八烷基三甲基溴化铵（STAB）自组装体为模板和非离子型联二萘酚衍生物（S）作为手性添加剂制备螺旋介孔二氧化硅。样品利用扫描电镜、透射电镜、X-光衍射以及氮气吸附-脱附进行了表征。结果表明：反应混合物中S与STAB的物质的量之比对介孔二氧化硅的形貌及孔结构有很大影响。改变n_S：n_STAB比,从0.1：1到0.4：1时,其结构从螺旋纳米棒状变为表面具有环形层状孔的纳米棒,孔道由沿着纳米棒长轴方向转变为同心环状。当n_S：n_STAB=0.5：1时,得到类似皱缩花瓣的纳米颗粒。该手性添加剂的引入并没有改变左右手螺旋纳米棒的比例。     

以联二萘酚衍生物为手性添加剂制备介孔二氧化硅

通过溶胶-凝胶法以十八烷基三甲基溴化铵(STAB)自组装体为模板和非离子型联二萘酚衍生物(S)作为手性添加剂制备螺旋介孔二氧化硅。样品利用扫描电镜、透射电镜、X-光衍射以及氮气吸附-脱附进行了表征。结果表明:反应混合物中S与STAB的物质的量之比对介孔二氧化硅的形貌及孔结构有很大影响。改变nS∶nSTAB比,从0.1∶1到0.4∶1时,其结构从螺旋纳米棒状变为表面具有环形层状孔的纳米棒,孔道由沿着纳米棒长轴方向转变为同心环状。当nS∶nSTAB=0.5∶1时,得到类似皱缩花瓣的纳米颗粒。该手性添加剂的引入并没有改变左右手螺旋纳米棒的比例。     

Preparation of Hierarchical Mesoporous Silica Nanoparticles through a Single‐Templating Approach

Silicas with hierarchical porous architectures attracted much attention, due to their potential applications in catalysis and separation. Generally, they were prepared through dual‐ or triple‐templating approaches. Herein, mesoporous silica nanoparticles with rod‐like pore channels inside and lamellar mesopores on the surfaces were prepared using the self‐assemblies of a chiral low‐molecular‐weight amphiphile as templates through a single‐templating approach. The formation of the lamellar mesopores was studied by taking field‐emission scanning electron microscopy and transmission electron microscopy images after different reaction times. The lamellar pores were proposed to be formed by merging rod‐like micelles during the sol‐gel process. Moreover, helical nanofibers with rod‐like pore channels inside and lamellar mesopores on the surfaces were prepared with the addition of n‐octanol as a co‐structure‐directing agent.     

Structural Control of Mesoporous 1,4-Phenylene-silica Using the Mixture of CTAB/SDS

The morphology, pore architecture and crystallinity of the mesoporous 1,4‐phenylene‐silicas were controlled using the mixtures of cetyltrimethylammonium bromide (CTAB) and sodium dodecylsulfate (SDS). When the SDS/CTAB molar ratio increased from 0 to 1.0, the morphology of the mesoporous 1,4‐phenylene‐silicas changed in a sequence of sphere, hexagonal short rod, worm‐like, bent flake and flower‐like structure; the pore architecture of them changed from a hexagonal arranged tubular structure to a lamellar one; and the organization of the smallest repeat units within the wall changed from a random structure to a crystalline structure. At the SDS/CTAB molar ratios of 0.3 and 0.5, 1,4‐phenylene‐silica nanofibers with lamellar mesopores outside and tubular pore channels inside were obtained. The lamellar mesopores should be formed by merging the rod‐like micelles during the reaction process.     

以卵磷脂为手性添加剂制备手性介孔二氧化硅

以十六烷基三甲基溴化铵(CTAB)的自组装体为模板,卵磷脂(PC)为手性添加剂,在n_PC:n_CTAB=1:21时,通过溶胶-凝胶法制备了螺旋介孔二氧化硅纳米棒。利用扫描电镜(FESEM)、透射电镜(TEM)、X-射线衍射以及氮气吸附-脱附等测试手段,对该纳米棒的形貌以及孔结构进行了表征。TEM显示该纳米棒的长度约为50~200nm,直径约为30~50nm。X-射线衍射表明孔道呈二维六方排列,虽然FESEM显示纳米棒左右手比例约为1:1,但通过圆二色谱表征证明该纳米棒在埃尺度下倾向于形成单一手性。结果表明,卵磷脂的手性可以传递到螺旋介孔二氧化硅纳米棒中。     

以卵磷脂为手性添加剂制备手性介孔二氧化硅

以十六烷基三甲基溴化铵(CTAB)的自组装体为模板,卵磷脂(PC)为手性添加剂,在n PC∶nCTAB=1∶21时,通过溶胶-凝胶法制备了螺旋介孔二氧化硅纳米棒。利用扫描电镜(FESEM)、透射电镜(TEM)、X-射线衍射以及氮气吸附-脱附等测试手段,对该纳米棒的形貌以及孔结构进行了表征。TEM显示该纳米棒的长度约为50～200 nm,直径约为30～50 nm。X-射线衍射表明孔道呈二维六方排列,虽然FESEM显示纳米棒左右手比例约为1∶1,但通过圆二色谱表征证明该纳米棒在埃尺度下倾向于形成单一手性。结果表明,卵磷脂的手性可以传递到螺旋介孔二氧化硅纳米棒中。     

Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

Preparation and characterizations of helical mesoporous silica nanorods using CTAB and alcohols

Helical mesoporous silica nanorods were prepared using cetyltrimethylamrnonium bromide and achiral alcohols as the co-structure-directing agents.They were characterized using field-emission scanning electron microscopy,transmission electron microscopy,nitrogen sorptions,and small angle X-ray diffraction.The length of the silica nanorods increases with increasing the length of the alcohols.When n-heptanol and n-octanol were used,helical mesoporous silica nanorods with lamellar mesopores on the surfaces were obtained.     

Helical silica nanotubes: Nanofabrication architecture,transfer of helix and chirality to silica nanotubes

A series of neutral gelators and cationic amphiphiles derived from 1,2 diphenylethylenediamine (I) and 1,2-cyclohexanediamine (II) was synthesised. Helical silica nanotubes were prepared utilising these organic gelators through sol-gel polycondensation of tetraethoxy silane, (TEOS-silica source). Right- and left-handed helical nanotubes respectively were obtained from a 1: 1 mass mixture of optically active, (1S,2S)-III-(1S,2S)-V neutral gelator and (1S,2S)-IV-(1S,2S)-VI cationic amphiphile and a 1: 1 mass mixture of optically active, (1R,2R)-III-(1R,2R)-V neutral gelator and (1R,2R)-IV-(1R,2R)-VI cationic amphiphile, indicating that the handedness of the helical nanotubes varied with the change in the neutral gelator precursors used. The nanotubes were characterised by SEM images.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Dual Soft‐Template System Based on Colloidal Chemistry for the Synthesis of Hollow Mesoporous Silica Nanoparticles

A new dual soft‐template system comprising the asymmetric triblock copolymer poly(styrene‐b‐2‐vinyl pyridine‐b‐ethylene oxide) (PS‐b‐P2VP‐b‐PEO) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) is used to synthesize hollow mesoporous silica (HMS) nanoparticles with a center void of around 17 nm. The stable PS‐b‐P2VP‐b‐PEO polymeric micelle serves as a template to form the hollow interior, while the CTAB surfactant serves as a template to form mesopores in the shells. The P2VP blocks on the polymeric micelles can interact with positively charged CTA⁺ ions via negatively charged hydrolyzed silica species. Thus, dual soft‐templates clearly have different roles for the preparation of the HMS nanoparticles. Interestingly, the thicknesses of the mesoporous shell are tunable by varying the amounts of TEOS and CTAB. This study provides new insight on the preparation of mesoporous materials based on colloidal chemistry.     

Mixed Oligoureas Based on Constrained Bicyclic and Acyclic β‐Amino Acids Derivatives: On the Significance of the Subunit Configuration for Folding

The combination of a non‐functionalized constrained bicyclo[2.2.2]octane motif along with urea linkages allowed the formation of a highly rigid 2.5_12/14 helical system both in solution and the solid state. In this work, we aimed at developing stable and functionalized systems as promising materials for biological applications in investigating the impact of this constrained motif and its configuration on homo and heterochiral mixed‐oligourea helix formation. Di‐, tetra‐, hexa‐, and octa‐oligoureas alternating the highly constrained bicyclic motif of (R) or (S) configuration with acyclic (S)‐β³‐amino acid derivatives were constructed. Circular dichroism (CD), NMR experiments, and the X‐ray crystal structure of the octamer unequivocally proved that the alternating heterochiral R/S sequences form a stable left‐handed 2.5‐helix in contrast to the mixed (S/S)‐oligoureas, which did not adopt any defined secondary structure. We observed that the (?)‐synclinal conformation around the C_α? C_β bond of the acyclic residues, although sterically less favorable than the (+)‐synclinal conformation, was imposed by the (R)‐bicyclic amino carbamoyl (BAC) residue. This highlighted the strong ability of the BAC residue to drive helical folding in heterochiral compounds. The role of the stereochemistry of the BAC unit was assessed and a model was proposed to explain the misfolding of the S/S sequences.     

Synthesis of Chiral 2‐Aroyl‐1‐tetralols: Asymmetric Transfer Hydrgenation of 2‐Aroyl‐1‐tetralones via Dynamic Kinetic Resolution

The dynamic kinetic resolution of 2‐aroyl‐1‐tetralones was achieved via asymmetric transfer hydrogenation using (S,S)‐RuCl(p‐cymene)TsDPEN (TsDPEN=N‐(tosyl)‐1,2‐diphenylethylenediamine) in formic acid/triethyl‐ amine (5:2, molar ratio), afforded the desired products in good yields (up to 85%) with diastereomeric ratio up to >99:1 and high enantiomeric excesses (up to >99%). The absolute configuration of major the product was confirmed by X‐ray crystal structure analysis.     

Poly(phenylene vinylene)‐based copolymers containing 3,7‐phenothiazylene and 2,6‐pyridylene chromophores: Fluorescence sensors for acids,metal ions,and oxidation

A novel copolymer, poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐2,6‐pyridylene‐1,2‐ethenylene) ( P3 ), containing N‐hexyl‐3,7‐phenothiazylene and 2,6‐pyridylene chromophores was synthesized to investigate the effect of protonation, metal complexation, and chemical oxidation on its absorption and photoluminescence (PL). Poly(N‐hexyl‐3,8‐iminodibenzyl‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) and poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) ( P2 ), consisting of 1,3‐divinylbenzene alternated with N‐hexyl‐3,8‐iminodibenzyl and N‐hexyl‐3,7‐phenothiazylene, respectively, were also prepared for comparison. Electrochemical investigations revealed that P3 exhibited lower band gaps (2.34 eV) due to alternating donor and acceptor conjugated units (push–pull structure). The absorption and PL spectral variations of P3 were easily manipulated by protonation, metal chelation, and chemical oxidation. P3 displayed significant bathochromic shifts when protonated with trifluoroacetic acid in chloroform. The complexation of P3 with Fe³⁺ led to a significant absorption change and fluorescence quenching, and this implied the coordination of ferric ions with the 2,6‐pyridylene groups in the backbone. Moreover, both phenothiazylene‐containing P2 and P3 showed conspicuous PL quenching with a slight redshift when oxidized with NOBF₄. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1272–1284, 2004     

Four New Cycloartane (=9,19‐Cyclolanostane) Saponins from the Aerial Parts of Thalictrum fortunei

The four new cycloartane (=9,19‐cyclolanostane) glycosides 1 – 4 were isolated from the aerial parts of Thalictrum fortunei (Ranunculaceae). The structures of these new glycosides were elucidated as (3β,16β,24S)‐cycloartane‐3,16,24,25,30‐pentol 3,25‐di‐β‐D ‐glucopyranoside ( 1 ), (3β,16β,24S)‐24‐(acetyloxy)cycloartane‐3,16,25,30‐tetrol 3,25‐di‐β‐D ‐glucopyranoside ( 2 ), (3β,16β,24S)‐24‐(acetyloxy)‐3‐(β‐D ‐glucopyranosyloxy)cycloartane‐16,25,30‐triol 25‐[β‐D ‐glucopyranosyl‐(1→6)‐β‐D ‐glucopyranoside] ( 3 ), and (3β,16β,24S)‐24‐(acetyloxy)‐3‐(β‐D ‐glucopyranosyloxy)cycloartane‐16,25,30‐triol 25‐[β‐D ‐glucopyranosyl‐(1→4)‐β‐D ‐glucopyranoside] ( 4 ). The structure elucidations were accomplished by 1D ‐ and 2D‐NMR methods, HR‐ESI‐MS, and hydrolysis.     

Facile Preparation of Chiral 1, 3‐Diols via Stereoselective Transfer Hydrogenation of 1, 3‐Diones

Asymmetric reduction of 1, 3‐diones catalyzed by (S, S)‐TsD‐PEN‐Ru(II) complex in a mixture of formic add‐triethylamine proceeded with a substrate/catalyst molar ratio of 100 to give (S, S)‐l,3‐diols with excellent diastereomeric (98.6% de) and enantiomeric purities ( > 99% ee). Other C₂‐symmetric diols were also obtained in almost quantitative yields with high diastereomeric (80.0%‐84.2% de) and enantiomeric purities ( > 99% ee).     

多面体倍半硅氧烷制备有序介孔氧化硅材料

Octa(tetramethylammonium)-polyhedral oligomeric silsesquioxane(TMA-POSS) with cage-like structure was synthesized, the structure was characterized by NMR, FTIR and Elemental analyses. The mesoporous silica was prepared under alkaline condition using TMA-POSS as the silicon source and hexadecyltrimethylammonium bromide (CTAB) as the template, the structures of these products were characterized by XRD, TEM and nitrogen adsorption and desorption methods. The results indicate that the synthesized silica exhibites a well-ordered hexagonal pore structure with larger specific surface area. With increasing of CTAB molar ratio, the spacing of the crystal plane d100 is increased. The effects of the pH values on the mesoporous structure in the reaction system with different molar ratio of nPOSS / nCTAB were investigated. The synthesis mechanism of mesoporous silica was also discussed.     

Terpenoids from Two Dicranopteris Species

Two new compounds, (6S,13S)‐6‐{[β‐D ‐glucopyranosyl‐(1→4)‐α‐L ‐rhamnopyranosyl]oxy}cleroda‐3,14‐dien‐13‐ol ( 1 ) and kadsuric acid 3‐methyl ester ( 2 ), together with nine known compounds, (6S,13E)‐6‐{[β‐D ‐glucopyranosyl‐(1→4)‐α‐L ‐rhamnopyranosyl]oxy}cleroda‐3,13‐dien‐15‐ol ( 3 ), (6S,13S)‐6‐[6‐O‐acetyl‐β‐D ‐glucopyranosyl‐(1→4)‐α‐L ‐rhamnopyranosyl]oxy}‐13‐{[α‐L ‐rhamnopyranosyl‐(1→4)‐β‐D ‐fucopyranosyl]oxy}cleroda‐3,14‐diene ( 4 ), (6S,13S)‐6‐{[6‐O‐β‐D ‐glucopyranosyl‐(1→4)‐α‐L ‐rhamnopyranosyl]oxy}‐13‐{[α‐L ‐rhamnopyranosyl‐(1→4)‐β‐D ‐fucopyranosyl]oxy}cleroda‐3,14‐diene ( 5 ), 15‐hydroxydehydroabietic acid ( 6 ), 15‐hydroxylabd‐8(17)‐en‐19‐oic acid ( 7 ), junicedric acid ( 8 ), (4β)‐kaur‐16‐en‐18‐oic acid ( 9 ), (4β)‐16‐hydroxykauran‐18‐oic acid ( 10 ), and (4β,16β)‐16‐hydroxykauran‐18‐oic acid ( 11 ) were isolated from the fronds of Dicranopteris linearis or D. ampla. Their structures were established by extensive 1D‐ and 2D‐NMR spectroscopy. Compounds 1 and 3 – 8 showed no anti‐HIV activities.