Visualization of the Heterogeneity of Cerium Oxidation States in Single Pt/Ce2Zr2Ox Catalyst Particles by Nano‐XAFS

The cerium oxidation states in single catalyst particles of Pt/Ce₂Zr₂O_x (x=7 to 8) were investigated by spatially resolved nano X‐ray absorption fine structure (nano‐XAFS) using an X‐ray nanobeam. Differences in the distribution of the Ce oxidation states between Pt/Ce₂Zr₂O_x single particles of different oxygen compositions x were visualized in the obtained two‐dimensional X‐ray fluorescent (XRF) mapping images and the Ce L_III‐edge nano X‐ray absorption near‐edge structure (nano‐XANES) spectra.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Electrocatalysis of Puerarin on a Nano-CeO2/MWCNTs Composite Modified Electrode and Its Determination in Pharmaceutical Preparations

A good route for the fabrication of CeO₂ nanoparticles (nano‐CeO₂)/multi‐walled carbon nanotubes (MWCNTs) modified glassy carbon electrodes (GCE) was proposed. MWCNTs are used to immobilize nano‐CeO₂. What′s more, with the addition of the MWCNTs, the agglomeration level of CeO₂ nanoparticles can be reduced, the extremely large surface area can be obtained and the electron transfer rate can be increased. The morphological characterization of nano‐CeO₂/MWCNTs was examined by scanning electron microscopy (SEM). The performances of the nano‐CeO₂/MWCNTs/GCE were characterized with cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and typical amperometric response (i‐t). The potential utility of the constructed electrodes was demonstrated by applying them to the analytical determination of puerarin concentration. The catalytic oxidation of puerarin has a better result on nano‐CeO₂/MWCNTs/GCE because of the synergistic effect of nano‐CeO₂ and MWCNTs. An optimized limit of detection of 8.0×10^?9 mol/L was obtained at a signal‐to‐noise ratio of 3 and with a fast response time (within 3 s). Additionally, the nano‐CeO₂/MWCNTs/GCE exhibited a wide linear range from 0.04 to 6.0 μmol/L and high sensitivity.     

Preparation of ZnO nanoparticle‐reinforced polyamide 6 composite by in situ‐coproduced method and their properties

Polyamide 6/ZnO nanocomposites (noted as PA6/ZnO) were prepared by an in situ co‐producing method, during which Zn₂(OH)₂CO₃ decomposed into nano‐ZnO in the process of the opening‐ring polymerization of caprolactam at high temperature. Transmission electron microscopy, X‐ray diffraction, thermogravimetric analysis, and differential scanning calorimetry were used to analyze the size and dispersive properties of nano‐ZnO, the crystallization and melting properties, the thermal properties, and crystal structure of PA6/ZnO composite, respectively. The results showed that the nano‐ZnO derived from Zn₂(OH)₂CO₃ via in situ polymerization of PA6‐ZnO was uniformly dispersed in PA6 matrix. However, the overall nano‐ZnO crystallization rate and crystal size in the PA6 matrix were hindered by the bulky PA6 molecular chains. The mechanical properties were evaluated using universal tensile and impact testing instruments. The results revealed that PA6/ZnO composite with 0.2% nano‐ZnO content possessed excellent tensile strength, enhanced by 75% in comparison with the pure PA6. The nano‐ZnO had little influence on the impact strength of PA6. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 165–170     

Enzyme Catalysis Induced Polymer Growth in Nanochannels: A New Approach to Regulate Ion Transport and to Study Enzyme Kinetics in Nanospace

Method that could regulate the ion transport in nanochannel in an efficient and rapid manner is still a challenge. Here, we introduced enzyme‐catalysis‐induced polymer growth in nanochannels to develop a new method to regulate the ion transport and evaluate the enzyme catalysis kinetics in nano‐space. As a model enzyme, Horseradish peroxidase (HRP) was immobilized in the nanochannels through a volume‐controlled‐drying method. In the presence of H₂O₂, HRP catalyzed o‐phenylenediamine (o‐PD) to trigger its polymer growth, in turn blocked the ion transport and led to the decrease of the ion current. Taking advantages of the high efficiency of enzyme catalysis and the nano‐confinement of nanochannels, the system readily achieved blocking ratios of ion current even reaching 99.6 % of the initial. Based on above concept, we developed a new method to evaluate the enzyme catalysis kinetics in nano‐confined space. By comparing with those in free state in solution and absorbed on planar surface, HRP confined in nanochannels presented similar apparent Michaelis constant (K_m) values for the substrate H₂O₂ but much higher K_m values for the substrate o‐PD, due to the steric hindrance and diffusion suppression. The enzyme‐catalysis‐induced polymerization in nanochannels might lead to new concept for the nano‐blocking/switching and provide a new platform for single molecule analysis and detection.     

Synthesis,thermal, and rheological properties of poly(trimethylene terephthalate)/BaSO4 nanocomposites

A novel method was developed for fabricating poly(trimethylene terephthalate) (PTT)/BaSO₄ nanocomposites using in situ polymerization. A nano‐BaSO₄ suspension was prepared by reacting H₂SO₄ with Ba(OH)₂ in 1,3‐propanediol (PDO). The mean size of original nano‐BaSO₄ is 15–23 nm. PTT matrix was synthesized by condensation polymerization of bis(3‐hydroxypropyl terephthalate) after the completion of transesterification of dimethyl terephthalate (DMT) with PDO. It was found that the addition of BaSO₄ had little influence on the synthesis of PTT. The properties of nanocomposites with a wide range of BaSO₄ fraction were systematically studied. The morphologies of the composites were investigated by transmission electron microscopy (TEM), which showed that agglomerate structures did not form until BaSO₄ content higher than 8 wt%. The thermal properties of the nanocomposites were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The DSC results revealed that the triple endothermic melting phenomenon is only observed for the nanocomposites which contained 4 wt% BaSO₄, other samples exhibit double endothermic melting. These results indicated that nano‐BaSO₄ could induce a microcrystal to form more perfect morphology and restrain the formation of much thicker lamellar crystallinity, that is, nano‐BaSO₄ could induce the formation of more uniform crystallinity. Besides, the crystallization ability of the composites was greatly improved by loading nano‐BaSO₄. The TGA results suggested that nano‐BaSO₄ slightly increased the maximum‐decomposing‐rate temperature 1 (T_max1), but markedly increased the maximum‐decomposing‐rate temperature 2 (T_max2). Furthermore, the steady‐state shear behavior of samples was investigated by a parallel‐plate rheometer. The storage modulus (G') and loss modulus (G”) curves shifted to higher modulus upon addition of 2–16 wt% of nano‐BaSO₄. All of the samples investigated exhibited the expected shear‐thinning behavior. Proper contents of nano‐BaSO₄ would decrease the shear viscosity of nanocomposites, whereas superfluous amounts would greatly increase the viscosity of nanocomposites and the composites which loaded 8 wt% nano‐BaSO₄ revealed an equivalent shear viscosity compared to pure PTT. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation of nanoalumina/EPDM composites with good performance in thermal conductivity and mechanical properties

In this paper, nanoalumina (Al₂O₃) highly filled ethylene propylene diene monomer (EPDM) composites are prepared, and the mechanical (static and dynamic) properties and thermal conductivity are investigated systemically through various characterization methods. Furthermore, influences of in situ modification (mixing operation assisted by silane at high temperature for a certain time) with the silane‐coupling agent bis‐(3‐triethoxy silylpropyl)‐tetrasulfide (Si69) and stearic acid (SA) pretreatment on the nano‐Al₂O₃ filled composites are as well investigated. The results indicate that nano‐Al₂O₃ particles can not only perform well in reinforcing EPDM, but also improve the thermal conductivity significantly. Assisted by in situ modification with Si69, the mechanical properties (especially dynamic mechanical properties) of the nano‐Al₂O₃ filled composites are improved obviously, without influencing the thermal conductivity. By comparing to the traditional reinforcing fillers, such as carbon black (grade N330) and silica, in situ modified nano‐Al₂O₃ filled composites exhibit excellent performance in mechanical (static and dynamic) properties as well as better thermal conductivity, especially lower compression heat build‐up and better fatigue resistance. In general, our work indicates that nano‐Al₂O₃, as the novel thermal conductive reinforcing filler, is suitable to prepare rubber products serving in dynamic conditions, with the longer expected service life. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis,characterization and photocatalytic application of TiO2/magnetic graphene for efficient photodegradation of crystal violet

A magnetized nano‐photocatalyst based on TiO₂/magnetic graphene was developed for efficient photodegradation of crystal violet (CV). Scanning electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and elemental mapping were used to characterize the prepared magnetic nano‐photocatalyst. The photocatalytic activity of the synthesized magnetic nano‐photocatalyst was evaluated using the decomposition of CV as a model organic pollutant under UV light irradiation. The obtained results showed that TiO₂/magnetic graphene exhibited much higher photocatalytic performance than bare TiO₂. Incorporation of graphene enhanced the activity of the prepared magnetic nano‐photocatalyst. TiO₂/magnetic graphene can be easily separated from an aqueous solution by applying an external magnetic field. Effects of pH, magnetized nano‐photocatalyst dosage, UV light irradiation time, H₂O₂ amount and initial concentration of dye on the photodegradation efficiency were evaluated and optimized. Efficient photodegradation (>98%) of the selected dye under optimized conditions using the synthesized nano‐photocatalyst under UV light irradiation was achieved in 25 min. The prepared magnetic nano‐photocatalyst can be used in a wide pH range (4–10) for degradation of CV. The effects of scavengers, namely methanol (OH^? scavenger), p‐benzoquinone (O₂^?? scavenger) and disodium ethylenediaminetetraacetate (hole scavenger), on CV photodegradation were investigated.     

Well Crystallized α-GaOOH Nanocrystals Synthesized through Hydrothermal Routes and Their Properties

A facile hydrothermal process involving Ga(NO₃)₃·H₂O·NaN₃ solutions led to the formation of α‐GaOOH nano‐platelets. X‐ray diffraction (XRD) pattern revealed that the synthesized samples belonged to an orthorhombic crystal structure with lattice constants a=0.4510 nm, b=0.9750 nm and c=0.2965 nm. Transmission electron microscopy (TEM) studies showed that α‐GaOOH displayed the morphologies of an eccentric platelet‐like structure with 60–120 and 200–300 nm in the short and long axes, respectively. The average thickness of products was about 70 nm through scanning electron microscopy (SEM) images. The ultraviolet absorption of the samples was at 214 nm. The prepared α‐GaOOH nano‐platelets exhibited a broad emission band from 220 to 400 nm with a maximum at 343 nm under short UV excitation of 200 nm. Fourier transform infrared (FTIR) spectrum confirmed the existence of Ga₂O and Ga–OH bending modes. A possible mechanism for the formation of α‐GaOOH nano‐platelets was discussed briefly.     

Effects of microscale calcium carbonate and nanoscale calcium carbonate on the fusion,thermal, and mechanical characterizations of rigid poly(vinyl chloride)/calcium carbonate composites

A Haake torque rheometer equipped with an internal mixer has been used to study the influence of microscale calcium carbonate (micro‐CaCO₃) and nanoscale calcium carbonate (nano‐CaCO₃) on the fusion, thermal, and mechanical characteristics of rigid poly(vinyl chloride) (PVC)/micro‐CaCO₃ and PVC/nano‐CaCO₃ composites, respectively. The fusion characteristics discussed in this article include the fusion time, fusion temperature, fusion torque, and fusion percolation threshold (FPT). The fusion time, fusion temperature, and FPT of rigid PVC/calcium carbonate (CaCO₃) composites increase with an increase in the addition of micro‐CaCO₃ or nano‐CaCO₃. In contrast, the fusion torque of rigid PVC/CaCO₃ composites decreases with an increase in the addition of micro‐CaCO₃ or nano‐CaCO₃. The results of thermal analysis show that the first thermal degradation onset temperature (T_onset) of rigid PVC/micro‐CaCO₃ is 7.5 °C lower than that of PVC. Meanwhile, the glass‐transition temperature (T_g) of rigid PVC/micro‐CaCO₃ is similar to that of PVC. However, T_onset and T_g of PVC/nano‐CaCO₃ composites can be increased by up to 30 and 4.4%, respectively, via blending with 10 phr nano‐CaCO₃. Mechanical testing results for PVC/micro‐CaCO₃ composites with the addition of 5–15 phr micro‐CaCO₃ and PVC/nano‐CaCO₃ composites with the addition of 5–20 phr nano‐CaCO₃ are better than those of PVC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 451–460, 2006     

UV‐Irradiation Cured Organic‐inorganic Hybrid Nanocomposite Initiated by Ethoxysilane‐modified Multifunctional Polymeric Photoinitiator through Sol‐gel Process

The UV‐cured organic‐inorganic hybrid nanocomposite (nano‐Si‐m‐PI) was prepared through the photopolymerization of acrylic resin initiated by ethoxysilane‐modified multifunctional oligomeric photoinitiator (Si‐m‐PI). The esterification reaction of 2‐hydroxy‐4′‐(2‐hydroxyethoxy)‐2‐methylpropiophenone (Irgacure 2959) with thioglycolic acid, and the following addition reactions with dipentaerythritol hexaacrylate and then 3‐aminopropyltriethoxysilane were carried out for preparing the Si‐m‐PI. The Si‐m‐PI exhibits the similar UV absorption and molar extinction coefficient with Irgacure 2959. The photoinitiating activity study by photo‐DSC analysis showed that the Si‐m‐PI possesses high photopolymerization rate at the peak maximum (R_p^max) and final unsaturation conversion (P^f) in the cured hybrid films. From the scanning electron microscope (SEM) observation, the SiO₂ nanoparticles dispersed uniformly in the formed nano‐Si‐m‐PI, whereas the aggregation of nanoparticals occurred in nano‐Irg, which was prepared through the photopolymerization of acrylic resin initiated by Irgacure 2959. Moreover, compared with the UV‐cured pure polymer and nano‐Irg, the nano‐Si‐m‐PI showed remarkably enhanced thermal stability and mechanical properties.     

Nano‐Zn[2‐boromophenylsalicylaldiminemethylpyranopyrazole]Cl2 as a novel nanostructured Schiff base complex and catalyst for the synthesis of pyrano[2,3‐d]pyrimidinedione derivatives

Nano‐Zn[2‐boromophenylsalicylaldiminemethylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a novel nanostructured Schiff base complex was prepared and characterized using several techniques. Nano‐[Zn‐2BSMP]Cl₂ was used as an effective catalyst for the preparation of some pyrano[2,3‐d]pyrimidinedione derivatives by the multicomponent reaction of malononitrile, aryl aldehydes and barbituric acid derivatives. The novelty and efficiency of nano‐[Zn‐2BSMP]Cl₂ as a catalyst, in comparison with some other reported catalysts, for this synthetic transformation are the main features of this work.     

A MgO Nanoparticles Composite Matrix‐Based Electrochemical Biosensor for Hydrogen Peroxide with High Sensitivity

A novel horseradish peroxidase (HRP) electrochemical biosensor based on a MgO nanoparticles (nano‐MgO)‐chitosan (chit) composite matrix was developed. The morphology of nano‐MgO‐chit nanocomposite was examined by scanning electron microscopy (SEM). The interaction between nano‐MgO‐chit nanocomposite matrix and enzyme was characterized with UV‐vis spectra. This proposed composite material combined the advantages of inorganic nanoparticles and organic polymer chit. The HRP immobilized in the nanocomposite matrix displayed excellent electrocatalytic activity to the reduction of H₂O₂ in the presence of hydroquinone as a mediator. The effects of the experimental variables such as solution pH and the working potential were investigated using steady‐state amperometry. The present biosensor (HRP‐modified electrode) had a fast response towards H₂O₂ (less than 10 s), and excellent linear relationships were obtained in the concentration range of 0.1–1300 μM, with a detection limit of 0.05 μM (S/N=3). Moreover, the stability and reproducibility of this biosensor were evaluated with satisfactory results.     

Mn‐[4‐Chlorophenyl‐Salicylaldimine‐Methylpyranopyrazole]Cl2 as a Novel Nanostructured Schiff Base Complex and Catalyst

Mn‐[4‐chlorophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ ([Mn‐4CSMP ]Cl₂) as nano‐Schiff base complex was prepared and fully characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermal gravimetric analysis, derivative thermogravimetry, scanning electron microscopy, energy‐dispersive X‐ray analysis, and UV–vis spectroscopy. The reactivity of nano‐[Mn‐4CSMP ]Cl₂ as a catalyst was tested on the tandem cyclocondensation–Knoevenagel condensation–Michael reaction between phenylhydrazine and ethyl acetoacetate with various aromatic aldehydes to give 4,4′‐(arylmethylene)‐bis‐(3‐methyl‐1‐phenyl‐1H ‐pyrazol‐5‐ol)s derivatives.     

Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂?(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm^?2 at 0.55 V vs. RHE.     

Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂⋅(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm⁻² at 0.55 V vs. RHE.     

Novel type of SO3H–functionalized nano‐titanium dioxide as a highly efficient and recyclable heterogeneous nanocatalyst for the synthesis of tetrahydrobenzo[b]pyrans

n ‐Butylsulfonated nano‐titania (n‐TiO₂‐NH‐(CH₂)₄‐SO₃H) as a highly efficient and reusable nanocatalyst was prepared by grafting 2,4‐toluene diisocyanate as a bi‐functional covalent linker onto a nano‐titania support, followed by reduction and then ring opening‐reaction of the synthesized amine with 1,4‐butanesultone. Fourier transform infrared spectroscopy, X‐ray diffraction, field‐emission scanning electron microscopy and thermogravimetric analysis were used to characterize the catalyst. The catalytic activity of n‐TiO₂‐NH‐(CH₂)₄‐SO₃H was evaluated in the synthesis of tetrahydrobenzo[b ]pyrans, which affords high yields. Statistical experimental design was applied as an efficient and powerful method to achieve the optimal conditions for this catalytic reaction leading to high yield. Moreover, the catalyst was recovered and reused at least six times without a significant decrease in catalytic activity.     

A New Enzyme Immobilization Technique Based on Thionine‐Bovine Serum Albumin Conjugate and Gold Colloidal Nanoparticles for Reagentless Amperometric Biosensor Applications

A novel enzyme immobilization technique based on thionine‐bovine serum albumin conjugate (Th‐BSA) and gold colloidal nanoparticles (nano‐Au) was developed. Thionine was covalently bound onto the BSA film with glutaraldehyde(GA) as cross‐linker to achieve Th‐BSA conjugate. The free amino groups of thionine were then used to attach nano‐Au for the immobilization of horseradish peroxidase (HRP). Such nano‐Au/Th‐BSA matrix shows a favorable microenvironment for retaining the native activity of the immobilized HRP and thionine immobilized in this way can effectively shuttle electrons between the electrode and the enzyme. The proposed biosensor displays excellent catalytic activity and rapid response for H₂O₂. The linear range for the determination of H₂O₂ is from 4.9×10^?7 to 1.6×10^?3 M with a detection limit of 2.1×10^?7 M at 3σ and a Michaelies‐Menten constant K value of 0.023 mM.     

An efficient catalytic method for the synthesis of pyrido[2,3‐d]pyrimidines as biologically drug candidates by using novel magnetic nanoparticles as a reusable catalyst

A convenient method for the synthesis of pyrido[2,3‐d]pyrimidines by using the novel nano‐magnetic silica‐bonded S‐sulfonic acid[Fe₃O₄@SiO₂@(CH₂)₃S–SO₃H] as an efficient and recyclable catalyst under neat conditions is described. The major advantages of the present methodology are high yield, short reaction time, and reusability of the catalyst. Furthermore, the nano‐magnetic silica‐bonded S‐sulfonic acid was fully characterized by using various techniques such as FT‐IR, TG/DTG, DTA, EDX, μXRF, XRD, HRTEM, SEM, SEM elemental mapping, XPS, and N₂ physisorption. The results obtained from this research support the idea of rational design, synthesis, and applications of task‐specific and reusable catalysts for the preparation of various polynitrogenated heterocyclic compounds containing 1,4‐dihydropyridine moieties.     

Preparation and properties of Nafion/SiO2 composite membrane derived via in situ sol–gel reaction: size controlling and size effects of SiO2 nano‐particles

A novel technique in controlling the size of SiO₂ nano‐particles in the preparation of Nafion/SiO₂ composite membranes via in situ sol–gel method, as well as the effects of nano‐particle size on membrane properties and cell performance, is reported in this paper. Nafion/SiO₂ composite membranes containing SiO₂ nano‐particles with four different diameters (5 ± 0.5, 7 ± 0.5, 10 ± 1, and 15 ± 2 nm) are fabricated by altering the reactant concentrations during in situ sol–gel reaction. Sequentially, size effects of SiO₂ nano‐particles on membrane properties and cell performance are investigated by SEM/EDAX, TEM, TGA, mechanical tensile, and single cell tests, etc. The results suggest that 10 nm is a critical diameter for SiO₂ incorporated into Nafion matrix, exhibiting desirable physico‐chemical properties for operation at elevated temperature and low humidity. At 110°C and 59% RH, the output voltage of the cell equipped with Nafion/SiO₂ (10 nm) obtains an output voltage of 0.625 V at 600 mA/cm², which is 50 mV higher than that of unmodified Nafion. Copyright © 2010 John Wiley & Sons, Ltd.