CpTiCl2(OR)/MAO体系催化苯乙烯间规聚合的研究

茂金属催化剂广泛应用于催化α-烯烃和苯乙烯的定向聚合. 与传统的Ziegler-Natta催化剂相比, 茂金属催化剂催化活性中心单一, 聚合过程立体定向性强, 且往往得到用常规方法所不能得到的新型聚合物［1～5］. Ishihara等［6］首次采用钛金属有机化合物与甲基铝氧烷(MAO)体系催化苯乙烯聚合, 分离得到间规聚苯乙烯, 从此揭开了苯乙烯定向聚合的新篇章, 合成了大量茂金属有机化合物, 用于催化苯乙烯间规聚合, 其中半夹心结构的茂金属化合物CpTiX3［7,8］, IndTiCl3［3,4,9,10］［Cp=(未)取代环戊二烯基, Ind=(未)取代茚基; X=Cl, F, 烷氧基等］具有最好的催化活性及间规定向性. (CpHMe4)TiF3［8］催化活性高达1.01×108 g PS/(mol Ti*h), 间规度≥95%.     

Synthesis and Characterization of Dinuclear Aluminum Complexes Bearing N,N-Dialkylaniline-amido Ligands and Its Catalytic Properties for Lactone Polymerization

Two ligands [ortho-C6H4NR2（CH2NH）]2CH2CH2（3： R=Me; 4： R=EO were prepared by the reduction of preligands [ortho-C6H4NR2（CH=N）]zCH2CH2（1： R=Me; 2： R=Et）. These ligands reacted with AIMe3 to afford the corresponding dinuclear aluminum complexes {A1Me2[ortho-C6H4NR2（CH2N）]}2CHzCH2（5： R=Me; 6： R=Et）. All the compounds were characterized by 1H and UC nuclear magnetic resonance（NMR） spectroscopies and elemental analyses. The catalytic properties of the aluminum complexes towards the ring-opening polymerization of lactones were investi- gated in the presence of benzvl alcohol. All the oolvmerization reactions were proceeded in a controlled manner.     

STUDIES ON ORGANO-MOLYBDENUM AND TUNGSTEN COMPOUNDS(Ⅲ)——CATALYTIC POLYMERIZATION OF ACETYLENE BY M-O-C BOND-CONTAINING COMPLEXES OF Mo AND W

Catalytic polymerization of acetylene in the presence of n5-C5H5-M-(CO)3 R (M=Mo,W;R=CH3-,C2H5-) has been studied.The results show that these complexes possess catalytic activities for the polymerization and copolymerization of monosubstituted acetylene.The catalytic mechanism has been preliminarily discussed.It is suggested that the active species be metal-car-bene.In our previous publications we reported the synthesis of some new Fischer's molybdenum and tungsten-carbene complexes and catalytic activity for alkyne polymerization.The results show that the activity of Fischer's molybdenum-carbene is higher than that of tungsten.The catalytic polymerization of alkyne by M-σ-c bond-containing complexes of molybdenum and tungsten has not been reported yet in literature.Therefore,four M-σ-C bondontaining complexes of molybdenum and tungsten were synthesized by using the method reported in the literature,and catalyst polymerization of alkyne by these complexes was examined.     

Synthesis of titanium(IV) complexes that contain the Bis(silylamide) ligand of the type [1,8-C10H6(NR)2], and alkene polymerization catalyzed by [1,8-C10H6(NR)2]TiCl2-cocatalyst system

[1,8-C₁₀H₆(NR)₂]TiCl₂ (3; R=SiMe₃, SiⁱBuMe₂, SiⁱPr₃) complexes have been prepared from dilithio salts [1,8-C₁₀H₆(NR)₂]Li₂ (2) and TiCl₄ in diethyl ether in moderate yields (60–63%). These complexes showed significant catalytic activities for ethylene polymerization and for ethylene/1-hexene copolymerization in the presence of methylaluminoxane (MAO), methyl isobutyl aluminoxane (MMAO), AlⁱBu₃– or AlEt₃–Ph₃CB(C₆F₅)₄ as a cocatalyst. The catalytic activities performed in heptane (cocatalyst MMAO) were higher than those carried out in toluene (cocatalyst MAO): 709 kg-PE/mol-Ti·h could be attained for ethylene polymerization by using [1,8-C₁₀H₆(NSiⁱBuMe₂)₂]TiCl₂–MMAO catalyst system.     

Synthesis of highly branched polyethylene using para‐phenyl‐substituted α‐diimine nickel catalysts

A series of para‐phenyl‐substituted α‐diimine nickel complexes, [(2,6‐R₂‐4‐PhC₆H₂N═C(Me))₂]NiBr₂ (R = ⁱPr ( 1 ); R = Et ( 2 ); R = Me ( 3 ); R = H ( 4 )), were synthesized and characterized. These complexes with systematically varied ligand sterics were used as precatalysts for ethylene polymerization in combination with methylaluminoxane. The results indicated the possibility of catalytic activity, molecular weight and polymer microstructure control through catalyst structures and polymerization temperature. Interestingly, it is possible to tune the catalytic activities ((0.30–2.56) × 10⁶ g (mol Ni·h)^?1), polymer molecular weights (M_n = (2.1–28.6) × 10⁴ g mol^?1) and branching densities (71–143/1000 C) over a very wide range. The polyethylene branching densities decreased with increasing bulkiness of ligand and decreasing polymerization temperature. Specifically, methyl‐substituted complex 3 showed high activities and produced highly branched amorphous polyethylene (up to 143 branches per 1000 C).     

New Half-sandwich Zirconium（IV） Complexes Containing Salicylaldimine Ligands： Synthesis,Characterizations and Catalytic Properties

Two new half-sandwich zirconium（IV） complexes bearing salicylaldimine ligands of the type Cp＊Zr[2-tBu-4-R-6-（CH=NiPr）C6H2O]C12[R=H（1）, tBu（2）] were prepared by the reaction of Cp＊ZrC13 with the corresponding lithium of salicylaldimine ligands 2-tBu-4-R-6-（CH=NiPr）C6H2OLi[R=H（LiLa）, tBu（LiLb）]. Com- plexes 1 and 2 were characterized by 1H NMR, BC NMR spectroscopy and elemental analysis. When activated with AliBu3 and Ph3CB（C6F5）4, both complexes 1 and 2 exhibited reasonable catalytic activities for ethylene polymeriza- tion, producing polyethylenes with moderate molecular weight. Complexes 1 and 2 also exhibited reasonable catalyt- ic activities for ethylene copolymerization with 1-hexene, producing poly（ethylene-co-l-hexene）s with moderate molecular weight and reasonable 1-hexene content.     

Catalytic activity of manganese(III)-oxazoline complexes in urea hydrogen peroxide epoxidation of olefins: The effect of axial ligands

The catalytic activity of two manganese(III)-oxazoline complexes [Mn(phox)₂(CH₃OH)₂]ClO₄ and Mn(phox)₃ (Hphox = 2-(2′-hydroxylphenyl)oxazoline), was studied in the epoxidation of various olefins. All of epoxidation reactions were carried out in (1:1) mixture of methanol:dichloromethane at room temperature using urea hydrogen peroxide (UHP) as oxidant and imidazole as co-catalyst. The epoxide yields clearly demonstrate the influence of steric and electronic properties of olefins, the catalysts and nitrogenous bases as axial ligand. [Mn(phox)₂(CH₃OH)₂]ClO₄ catalyst with low steric properties has higher catalytic activity than Mn(phox)₃. The highest epoxide yield (95%) was achieved for indene at the presence of [Mn(phox)₂(CH₃OH)₂]ClO₄ within 5 min. The proximal and distal interactions of strong π-donor axial ligands such as imidazole with the active intermediate are efficiently increased activity of the catalytic system.     

Olefin polymerization by (cyclopentadienyl)(ketimide)titanium(IV) complexes of the type, Cp′TiCl2(N=CBu2)-methylaluminoxane (MAO) catalyst systems

Effects of substituents on cyclopentadienyl group for homopolymerization of ethylene, 1-hexene, and for ethylene/1-hexene copolymerization using a series of nonbridged (cyclopentadienyl)(ketimide)titanium complexes of the type, Cp′TiCl₂(N=C^tBu₂) [Cp′ = Cp (1), ^tBuC₅H₄ (2), C₅Me₅ (Cp^*, 3), and indenyl (4)] have been explored in the presence of methylaluminoxane (MAO) cocatalyst. Complexes 1–3 showed the similar catalytic activities for ethylene polymerization although the activity by 4 was somewhat low, whereas the activity for 1-hexene polymerization increased in the order 1 > 4 2 > 3. These complexes showed significant activities for ethylene/1-hexene copolymerization affording high molecular weight poly(ethylene-co-1-hexene)s with unimodal molecular weight distributions, and the activity increased in the order: 4 > 1 2, 3. The r_Er_H values in the polymerization by 1–3 at 40 °C were 0.35–0.52 which clearly indicate that the 1-hexene incorporation in the copolymerization did not proceed in a random manner. The r_E values by 1–3 were 6.0–6.4 and the values were independent upon the cyclopentadienyl fragment employed; the r_E values by 4 at 40 °C were 10.2–10.9 which were close to those by ansa-metallocene complex catalysts. These values were influenced by the polymerization temperature, and the 1-hexene incorporation by 1–4 became inefficient at higher temperature, although the observed activities especially by 1, 4 were highly remarkable.     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

吡啶-三唑金属配合物的合成及其在乙烯聚合反应中的催化性能

以苄氯、吡啶炔和叠氮化钠为原料,在铜(Ⅰ)催化下,通过Click反应制得新型配体1-苄基-4-邻吡啶基-1,2,3-三唑(1); 1分别与无水FeCl₂, CoCl₂或NiBr₂ ·DME反应合成了3个新型的吡啶基三唑金属配合物(2~4),其结构经¹H NMR, ¹³C NMR, IR和元素分析表征。考察了2~4对乙烯聚合反应的催化性能。结果表明：以甲基铝氧烷(MAO)为助催化剂, 4具有最高的催化活性,在温度为20 ℃, Al/Ni为2 500条件下,催化活性达8.8×10⁵ g·mol^-1·h^-1。     

柄型金属有机化合物(Ⅳ)——四甲基二硅桥连取代环戊二烯基钛和锆化合物的合成及催化乙烯聚合

四甲基二硅桥连取代环戊二烯基配体相继与丁基锂及MCl₄·2THF作用,生成四甲基二硅桥连取代环戊二烯基钛和锆化合物(Me₂SiSiMe₂)(C₅H₄R)(C₅H₄R')MCl₂[R=H,R'=t-Bu,M=Ti(1),Zr(2),Hf(3);R=H,R'=Me,M=Ti(4);R=R'=Me,M=Ti(5),Zr(6)].通过元素分析、MS和¹HNMR谱表征了化合物的分子结构,并通过X射线衍射分析测定了化合物1的晶体结构.研究了在甲基铝氧烷(MAO)的助催化下,化合物1-3和6对乙烯聚合的催化性能。     

Neue methoden zur herstellung von trialkylphosphan-alkadien-eisen(0)-komplexen

Mono(1,3-diene)tris(PR₃)iron(0) complexes and bis(1,3-diene)mono(PR₃)iron(0) complexes can be synthesized by reduction of FeCl₂ with magnesacyclopent-3-ene or activated Mg in the presence of 1,3-dienes and the appropriate PR₃ (R = Me, Et, Prⁿ, Cy) ligand. How the various substituted bis(1,3-diene)PR₃Fe⁰ complexes can be obtained from the thermally unstable 1,3-butadiene-tris(PR₃)Fe⁰ complexes by addition of 1,3- or 1,5-dienes is shown. The NMR spectra of these complexes indicate that they are square-pyramidal. This geometry was confirmed by a crystal structure analysis of 1,5-COD-1,3-butadiene-iron(0)-PEt₃. The probable mechanism of formation of these novel iron(0) complexes is discussed and their characteristic properties are described.     

Iminophosphine-palladium(0) complexes as catalysts in the alkoxycarbonylation of terminal alkynes

In the presence of methanesulfonic acid, the palladium(0)-olefin complexes: [Pd(η²-ol)(P---N)] [ol=dimethyl fumarate or fumaronitrile, P---N=1-(Ph₂P)C₆H₄-2-CH=NR (R=CMe₃ or C₆H₄OMe-4)] catalyse the alkoxycarbonylation of terminal alkynes. Moderately good rates are obtained when the catalysts are promoted with two equivalents of the free P---N ligand and a large excess of acid at 120°C. The catalytic data suggest that derivatives of the type [Pd(alkyne)(P---N)_n] (n=2–3) are the active catalytic species.     

Reactivity studies of [Pd2(μ-X)2(PBu3)2] (X = Br, I) with CNR (R = 2,6-dimethylphenyl), H2 and alkynes

Improved syntheses for the dimeric compounds [Pd₂(μ-X)₂(PBu^t₃)₂] (X = Br, I) have been developed and the X-ray crystal structure for the dimer with X = 1 is reported. The reactions of these dimers with CNR (R = 2,6-dimethylphenyl), H₂ and a series of terminal and substituted alkynes are also reported. The dimer with X = Br is an initiator for the catalytic polymerisation of phenylacetylene. The product of the dimers with disubstituted alkynes results in the synthesis of trimeric species with formula [Pd₃(μ-X){ν²-C₄(CO₂R)₄}₂][PBu^t₃)Me]₂ (X = Br, I; R = Me, Et). The X-ray crystal structure of one of these compounds (when R = Et and X = I) is presented, demonstrating that the palladium dimers assist the C---C coupling of the alkynes.     

Molecular mechanics (MM2) calculations and cone angles of phosphine ligands

Molecular mechanics (MM2) calculations were performed on 54 conformations of 18 phosphines (PH₃; PH_3−nR_n, where n = 1,…3, and R = Me and Et, n = 1 or 2 and R =ⁱPr, and n = 1 and R =^tBu, PMe₂Et, PMeEt₂, and PPhMe₂, and PPh₂R where R = Me, Et, ⁱPr, ^tBu and Ph). The results are compared to those previously obtained from MINDO/3 and MNDO calculations, and to experimental data. Single conformer cone angles and weighted average cone angles were calculated from MM2 optimized geometries employing Tolman's general definition, and they are compared to Tolman's values, MINDO/3 results, and T.L. Brown's E_R values. Of the cone angle definitions used, the weighted average values are suggested as the best single representation of phosphine ligand sizes. The steric parameters (cone angle and E_R values) alone, and in conjunction with electronic parameters, are correlated with experimental data.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

The chemistry of 1,3,5-triazacyclohexane complexes 5: cationic zinc(II) alkyl complexes of N-alkylated 1,3,5-triazacyclohexanes and 13-benzyl-1,5,9-triazatricyclo[7.3.1.0]-tridecane

Diethylzinc reacts with hydroperchlorates of N-alkylated 1,3,5-triazacyclohexanes (R₃TAC; R = methyl (Me), benzyl (Bz), isopropyl (ⁱPr)) and with the hydrotetrafluoroborate of 1,3,5-tris-(para-fluorobenzyl)-1,3,5-triazacyclohexane (FBz₃TAC) to give the corresponding cationic zinc ethyl complexes [(R₃TAC)Zn(Et)][X] (X = ClO₄⁻, BF₄⁻). Similar complexes were obtained from diethylzinc treated with [HNMe₂Ph][BF₄] or [HNMe₂Ph][B(C₆F₅)₄](Et₂O) in the presence of R₃TAC (R = Bz, FBz, s-1-phenylethyl (s-PhMeCH)). A product of decomposition of [(Bz₃TAC)Zn(Et)][ClO₄] was analyzed by X-ray diffraction. The structures of [({s-PhMeCH}₃TAC)Zn(Et)][BF₄] an [(FBz₃TAC)Zn(Et)][BF₄] were estimated using nuclear Overhauser enhancement spectroscopy. Protonolysis of diethylzinc with [HNMe₂Ph][BF₄] in the presence of 13-benzyl-1,5,9-triazatricyclo[7.3.1.0^5,13]-tridecane (BzTATC) yielded the complex [(BzTATC)Zn(Et)][BF₄].     

Easily accessible and robust olefin-metathesis catalysts based on ruthenium vinylidene complexes

Nine mixed ligand ruthenium(II) vinylidene complexes with the general formula: [RuCl₂{=C=CHR′}(PCy₃)(L)] and [RuCl{=C=CHR′}(PCy₃)(sal-R)] (L=N-heterocyclic carbene, sal-R=salicylaldiminate anion, R′=Ph, SiMe₃, ^tBut) has been synthesized and characterized. These complexes are easily accessible from [RuCl₂(p-cymene)]₂, terminal alkynes, imidazolium salts or salicylaldimine salts and they have been found to serve as good catalyst precursors for ring-opening metathesis polymerization (ROMP) of norbornene, substituted norbornenes, polycyclic alkenes and cyclooctene and ring-closing metathesis (RCM) of ,ω-dienes. Furthermore, these precursors possess extremely high stability toward air, heat and moisture in comparison with other metathesis-active alkylidene ruthenium systems. No significant catalyst decomposition was found for several days at elevated temperatures.     

三种不同碳桥联双核茂钛配合物的合成及催化乙烯聚合研究

合成了3种不同结构的CnH₂n桥联双核茂钛配合物(CH₃)₂C[(C₅H₄)TiCl₂(C₅H₅)]₂(3),(CH₂)_n[(C₅H₄)TiCl₂(C₅H₅)]₂(6,n=3;7,n=4),并用1HNMR进行了表征.发现以甲苯为溶剂时,不仅提高了产率,而且有效地避免了副产物Cp₂TiCl₂的生成.研究了化合物7/MAO(甲基铝氧烷)催化乙烯聚合的反应,考察了反应条件对催化体系的影响.结果表明,催化活性随着n(Al)/n(Cat.)比的增大而提高,聚乙烯的分子量在n(Al)/n(Cat.)=500和50℃时达到最高值9.0102×10⁴;随着聚合时间的延长,催化活性下降,而产物分子量不断升高;随着温度的上升,50℃时催化活性和聚乙烯的分子量最高,分别为2.4074×10⁵gPE/(molTi·h)和6.8679×10⁴.随着桥联双核茂钛配合物碳桥的增长,催化活性增加,所得聚乙烯的分子量降低.     

Introduction of Constrained Cyclic Skeleton into β-Enaminoketonato Vanadium Complexes: A Strategy for Stabilization of Active Centre of Vanadium Catalyst for Ethylene Polymerization

Several novel mono( ?-enaminoketonato) vanadium complexes bearing constrained cyclic skeleton, including[(C6H5)C6H3C(O) = C(CH2)nCH = N ― Ar]VCl2(THF)2(V3a: n = 1, Ar = C6H5; V4a: n = 2, Ar = C6H5; V4b: n = 2, Ar =C6F5; V4c: n = 2, Ar =(C3H7)2C6H3; V5a: n = 3, Ar = C6H5), were synthesized and their structure and properties were characterized. The structures of V4 c and V5 a in solid-state were further confirmed by X-ray crystallographic analysis.Density functional theory(DFT) results indicated that these complexes showed enhanced steric hindrance around the metal center as compared with the acyclic analogues. Upon activation with Et2 Al Cl and in the presence of ethyl trichloroacetate as a reactivator, all of the complexes exhibited high catalytic activities(107 g PE/(mol V·h)) toward ethylene polymerization, and the obtained polymers exhibited unimodal distributions(Mw/Mn = 2.0-2.3) even produced at elevated temperatures(70-100 °C) and prolonged reaction time. When MAO was employed as a cocatalyst, they only showed moderate catalytic activities(105 g PE/(mol V·h)), but the resulting polymers had higher molecular weights(168-241 kg/mol). These vanadium complexes with cyclic skeleton also showed high catalytic activities toward ethylene/norbornene copolymerization. The produced copolymers displayed approximate alternating structure at high in-feed concentration of norbornene. The catalytic capabilities of these complexes could be tuned conveniently by varying ligand structure. Furthermore, the cyclic voltammetry results also proved that these complexes exhibited better redox stabilities than the complexes bearing linear skeleton.