Some basic viscous flows in micropolar fluids

Summary This paper analyzes some basic viscous flows of micropolar fluids. The problems ofCouette andPoiseuille flows between two parallel plates and a rotating fluid with a free surface, are solved using the theory of micropolar fluids. The results are presented graphically and compared with the classical ones, and the differences are discussed.     

Similar laminar boundary layers in incompressible micropolar fluids

Summary A search for similar solutions reveals as only possible similar boundary layer flow in micropolar fluids the flow near a stagnation point. The corresponding equations have been solved numerically by means of a shooting method. Consideration is given not only to the coupling parameterC ₁ and the microdiffusivity parameterC ₂ but also to the microinertia parameterC ₃. It is shown that macroscopic properties of steady boundary layer flows are not very much affected by these parameters, while the microrotation and therefore the inner structure of the layer is very sensitive to all three parameters. These properties of the microstructure can become important in certain unsteady flow problems; then also the macroscopic behaviour may be different to the behaviour of Newtonian fluids.

---

Zusammenfassung In der vorliegenden Untersuchung wird gezeigt, daß ähnliche Grenzschichten in mikropolaren Flüssigkeiten nur in der Nähe eines Staupunkts existieren. Die zugehörigen gewöhnlichen Differentialgleichungen werden mit einem Einschießverfahren numerisch gelöst. Neben dem KopplungsparameterC ₁ und dem MikrorotationsparameterC ₂ wird dabei auch der Einfluß der Mikroträgheit im ParameterC ₃ berücksichtigt. Es zeigt sich, daß diese Parameter die makroskopischen Eigenschaften stationärer Grenzschichtströmungen relativ wenig beeinflussen, während sich die Mikrorotation und damit die innere Struktur der Grenzschicht mit diesen Parametern sehr stark ändern kann. Man kann vermuten, daß diese Eigenschaften mikropolarer Flüssigkeiten bei instationären Vorgängen durchaus auch im makroskopischen Verhalten zu größeren Abweichungen gegenüber newtonschen Flüssigkeiten führen können.

---

---

With 6 figures and 1 table     

Nonsimilar incompressible laminar boundary-layer flows in micropolar fluids

Summary The solution of the steady laminar incompressible nonsimilar boundary-layer problem for micropolar fluids over two-dimensional and axisymmetric bodies has been presented. The partial differential equations governing the flow have been transformed into new co-ordinates having finite range. The resulting equations have been solved numerically using implicit finite-difference scheme. The computations have been carried out for a cylinder and a sphere. The results indicate that the separation in micropolar fluids occurs at earlier streamwise locations as compared to Newtonian fluids. The skin friction and velocity profiles depend on the shape of the body and are almost insensitive to microrotation or coupling parameter, provided the coupling parameter is small. On the other hand, the microrotation profiles and microrotation gradient depend on the microrotation parameter and they are insensitive to the coupling parameter.

---

Zusammenfassung Es wird die Lösung des stationären Grenzschichtproblems inkompressibler mikropolarer Flüssigkeiten für den Fall der Nichtähnlichkeit bei zweidimensionalen und achsensymmetrischen Körpern vorgelegt. Die dem Problem zugrunde liegenden partiellen Differentialgleichungen werden durch Einführung neuer Koordinaten auf ein endliches Gebiet transformiert. Die so erhaltenen Gleichungen werden mit Hilfe eines impliziten Differenzenverfahrens numerisch gelöst. Die Rechnung wird für den Zylinder und die Kugel durchgeführt. Die Ergebnisse zeigen, daß die Grenzschichtablösung früher erfolgt als bei vergleichbaren newtonschen Flüssigkeiten. Wandreibung und Geschwindigkeitsprofile hängen von der Gestalt des Körpers ab und sind nahezu unempfindlich gegen Mikrorotation und Kopplungsparameter, vorausgesetzt, daß der letztere klein ist. Dagegen hängen das Profil und der Gradient der Mikrorotation vom Parameter der Mikrorotation ab und sind ebenfalls unempfindlich gegen die Kopplungsparameter.

---

---

With 6 figures     

Time periodic electroosmotic flow of micropolar fluids through microparallel channel

The time periodic electroosmotic flow of an incompressible micropolar fluid between two infinitely extended microparallel plates is studied.The analytical solutions of the velocity and microrotation are derived under the Debye-H(u|¨)ckel approximation.The effects of the related dimensionless parameters,e.g.,the micropolar parameter,the frequency,the electrokinetic width,and the wall zeta potential ratio of the upper plate to the lower plate,on the electroosmotic velocity and microrotation are investigated.The results show that the amplitudes of the velocity and the volume flow rate will drop to zero when the micropolar parameter increases from 0 to 1.The effects of the electrokinetic width and the frequency on the velocity of the micropolar fluid are similar to those of the Newtonian fluid.However,the dependence of the microrotation on the related parameters mentioned above is complex.In order to describe these effects clearly,the dimensionless microrotation strength and the penetration depth of the microrotation are defined,which are used to explain the variation of the microrotation.In addition,the effects of various parameters on the dimensionless stress tensor at the walls are studied.     

A transient natural convection of micropolar fluids over a vertical cylinder

A transient free convective boundary layer flow of micropolar fluids past a semi-infinite cylinder is analysed in the present study. The transformed dimensionless governing equations for the flow, microrotation and heat transfer are solved by using the implicit scheme. For the validation of the current numerical method heat transfer results for a Newtonian fluid case where the vortex viscosity is zero are compared with those available in the existing literature, and an excellent agreement is obtained. The obtained results concerning velocity, microrotation and temperature across the boundary layer are illustrated graphically for different values of various parameters and the dependence of the flow and temperature fields on these parameters is discussed. An increase in the vortex viscosity tends to increase the magnitude of microrotation and thus decreases the peak velocity of fluid flow. An increase in the vortex viscosity in micropolar fluids is shown to decrease the heat transfer rate.     

Effects of a transverse flows with variable viscosity in micropolar fluids

A regular perturbation analysis is presented for three laminar natural convection flows in micropolar fluids in liquids with temperature dependent viscosity: a freely-rising plane plume, the flow above a horizontal line source on an adiabatic surface (a plane wall plume) and the flow adjacent to a vertical uniform flux surface. While these flows have well-known power-low similarity solutions when the fluid viscosity is taken to be constant, they are non-similar when the viscosity is considered to a function of temperature. A single similar flow, that adjacent to a vertical isothermal surface, is also analysed for comparison in order to estimate the extent of validity of perturbation analysis. The formulation used here provides a unified treatment of variable viscosity effects on those four flows. Computed first-order perturbation quantities are presented for all four flows. Numerical results for velocity, angular velocity and thermal functions has been shown graphically or tabulated for different values of micropolar parameters. Received on 20 October 1997     

Numerical simulation of flow of micropolar fluids in a channel with a porous wall

Two‐dimensional steady, laminar, and incompressible flow of a micropolar fluid in a channel with no‐slip at one wall and constant uniform injection through the other wall is considered for different values of the Reynolds number R. The main flow stream is superimposed by constant injection velocity at the porous wall. The micropolar model introduced by Eringen is used to describe the working fluid. An extension of Berman's similarity transformations is used to reduce governing equations to a set of nonlinear coupled ordinary differential equations (ODEs) in dimensionless form. An algorithm based on finite difference method is employed to solve these ODEs and Richardson's extrapolation is used to obtain higher order accuracy. It has been found that the magnitude of shear stress increases strictly at the impermeable wall whereas it decreases steadily at the permeable wall, by increasing the injection velocity. The maximum value of streamwise velocity and that of the microrotation both increase with increasing the magnitude of R. Copyright © 2010 John Wiley & Sons, Ltd.     

Lubrication theory for micropolar fluids and its application to a journal bearing with finite length

In this paper, the field equation of micropolar fluid with general lubrication theory assumptions is simplified into two systems of coupled ordinary differential equation. The analytical solutions of velocity and microrotation velocity are obtained. Micropolar fluid lubrication Reynolds equation is deduced. By means of numerical method, the characteristics of a finitely long journal bearing under various dynamic parameters, geometrical parameters and micropolar parameters are shown in curve form. These characteristics are pressure distribution, load capacity, coefficient of flow flux and coefficient of friction. Practical value of micropolar effects is shown, so micropolar fluid theory further closes to engineering application.     

MHD free-convective flow of micropolar and Newtonian fluids through porous medium in a vertical channel

We have studied the fully-developed free-convective flow of an electrically conducting fluid in a vertical channel occupied by porous medium under the influence of transverse magnetic field. The internal prefecture of the channel is divided into two regions; one region filled with micropolar fluid and the other region with a Newtonian fluid or both the regions filled by Newtonian fluids. Analytical solutions of the governing equations of fluid flow are found to be in excellent agreement with analytical prediction. Analytical results for the details of the velocity, micro-rotation velocity and temperature fields are shown through graphs for various values of physical parameters. It is noticed that Newtonian fluids prop up the linear velocity of the fluid in contrast to micropolar fluid. Also the skin friction coefficient at both the walls is derived and its numerical values are offered through tables.     

Secondary flow induced by the rotation of two concentric spheres about their common diameter in micropolar fluids

Summary In this paper, we have studied the secondary flow induced in a micropolar fluid by the rotation of two concentric spheres about a fixed diameter. The secondary flow exhibits behaviour commonly observed in visco-elastic fluids. In particular we have obtained the expressions for microrotation vector. Numerical results have been obtained for a number of values of relative rotations of the two spheres for a chosen set of values of fluid parameters. The results are presented graphically and compared with the previous investigations.     

On circular micropolar plates

Summary This paper analyses the symmetrical bending of laterally loaded circular micropolar plates. The linear theory of micropolar plates has been used to investigate the effect of microstructure of the medium on bending of circular micropolar plates. It is found that the results of the new plate theory are dependent on Poisson's ratio and two new parameters which are related to the material constants of the micropolar plate theory.

---

Übersicht Es wird die symmetrische Biegung von seitlich belasteten mikropolaren Platten untersucht. Mit Hilfe der linearen Theorie dünner Platten wird der Einfluß der Mikrostruktur des Materials auf die Biegung mikropolarer Platten behandelt. Dabei stellt sich heraus, daß die Ergebnisse der neuen Plattentheorie von der Poissonschen Zahl und von zwei neuen Parametern abhängen, die mit den Materialkonstanten der Theorie mikropolarer Platten zusammenhängen.

---

---

The author wishes to thank Professor A. C. Eringen, for valuable discussions.     

Analysis of micropolar elastic beams

In this paper, a linear theory for the analysis of beams based on the micropolar continuum mechanics is developed. Power series expansions for the axial displacement and micro-rotation fields are assumed. The governing equations are derived by integrating the momentum and moment of momentum equations in the micropolar continuum theory. Body couples and couple stresses can be supported in this theory. After some simplifications, this theory can be reduced to the well-known Timoshenko and Euler–Bernoulli beam theories. The nature of flexural and longitudinal waves in the infinite length micropolar beam has been investigated. This theory predicts the existence of micro-rotational waves which are not present in any of the known beam theories based on the classical continuum mechanics. Also, the deformation of a cantilever beam with transverse concentrated tip loading has been studied. The pattern of deflection of the beam is similar to the classical beam theories, but couple stress and micro-rotation show an oscillatory behavior along the beam for various loadings.     

Harmonic solutions of micropolar elastodynamics

The equations of micropolar elastodynamics are considered for an unbounded continuum subjected to a body force and a body couple. These act harmonically with the same real frequency , but with individual arbitrary spatial distributions. Over a harmonic state, the displacement and microrotation are related to two radiation conditioned harmonic vectors, each acquiring three eigenvalue contributions, assuming a noncritical -frequency. Altogether, four distinct eigenvalues are admissible. If ²<2² ₀, ₀ being a frequency parameter of the continuum, two of these are real while two are purely imaginary. But if ²<2² ₀, then all admissible eigenvalues are real. Each eigenvalue contribution resolves into a series of Hankel and Bessel functions coupled to Hankel type transforms of: (i) spherical integrals which, in turn, can be expanded via spherical harmonics for the 3-dimensional problem, (ii) circular integrals for the 2-dimensional problem. Axisymmetric and spherically symmetric results are deduced in 3-dimensions. Asymptotic solutions are also established; they disclose long-range formation of radially attenuated spherical (or circular) waves propagating with, generally, anisotropic amplitudes but, invariably, isotropic eikonals.If, in the absence of a body couple, a body force acts radially in 3-dimensions with a spherically symmetric strength, then the elastic displacement behaves likewise while the microrotation vanishes identically. Another application is made to a 2-dimensional problem for a 1 × 3 source system of body force plus body couple without longitudinal variation but with magnitudes symmetric about a longitudinal axis.As approaches a certain critical frequency , dependent solely on the continuum, at least two eigenvalues approach the same value. The phenomenon is explored for a continuum consistent with ²<2² ₀ and under the hypothesis ²<2² ₀. All admissible eigenvalues are then real throughout an -neighbourhood of . Here, two associated eigenvalue contributions behave singularly. Nevertheless, their essential singularities cancel out within the relevant combination. Examination of a far-field suggests that critical frequency attainment sets off a slow instability in the 2-dimensional configuration. In the 3-dimensional configuration, however, it preserves stability and eliminates radial attenuation; an exact solution is formulated for this case.     

Isotropic hardening in micropolar plasticity

Experimental evidence for length scale effects in plasticity has been provided, e.g., by Fleck et al. (Acta Metall. Mater. 42:475–487, 1994). Results from torsional loadings on copper wires, when appropriately displayed, indicated that, for the same shear at the outer radius, the normalized torque increased with decreasing specimen radius. Modeling of the constitutive behavior in the framework of micropolar plasticity is a possibility to account for length scale effects. The present paper is concerned with this possibility and deals with the theory developed by Grammenoudis and Tsakmakis (Contin. Mech. Thermodyn. 13:325–363, 2001; Int. J. Numer. Methods Eng. 62:1691–1720, 2005; Proc. R. Soc. 461:189–205, 2005). Both isotropic and kinematic hardening are present in that theory, with isotropic hardening being captured in a unified manner. Here, we discuss isotropic hardening composed of two parts, responsible for strain and gradient effects, respectively.     

Unsteady unidirectional micropolar fluid flow

This paper considers the unsteady unidirectional flow of a micropolar fluid, produced by the sudden application of an arbitrary time dependent pressure gradient, between two parallel plates. The no-slip and the no-spin boundary conditions are used. Exact solutions for the velocity and microrotation distributions are obtained based on the use of the complex inversion formula of Laplace transform. The solution of the problem is also considered if the upper boundary of the flow is a free surface. The particular cases of a constant and a harmonically oscillating pressure gradient are then examined and some numerical results are illustrated graphically.