Synthesis of poly(vinylene arsine)s through the ring‐collapsed radical alternating copolymerization of an organoarsenic homocycle with aliphatic acetylenes and their properties

Poly(vinylene arsine)s with no aromatic substituent ([? CH?CR? AsMe? ]_n) were prepared through a radical alternating copolymerization of acetylenic compounds having an alkyl substituent with an organoarsenic homocycle as an arsenic‐atomic biradical equivalent. The radical reaction between 1‐octyne and pentamethylcyclopentaarsine, with a catalytic amount of 2,2′‐azobisisobutyronitrile without a solvent (60 °C, 10 h), produced the corresponding poly(vinylene arsine)s (45% yield). The copolymers obtained were soluble in tetrahydrofuran, chloroform, hexane, and so on. The copolymers were characterized with ¹H and ¹³C NMR spectra. The number‐average molecular weights of the copolymers were estimated with gel permeation chromatography (chloroform and polystyrene standards) to be 6500. The copolymers showed an emission property attributable to the n–π* transition in the main chain. Irradiation by an incandescent lamp of a mixture of 1‐octyne and 1 also produced poly(vinylene arsine)s. The conversion rate of 1‐octyne during the copolymerization with 2,2′‐azobisisobutyronitrile was measured with gas chromatography analysis and was found to be much slower than that of phenylacetylene. A radical terpolymerization of cyclo‐(AsMe)₅ with 1‐octyne and styrene was carried out to yield the terpolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3604–3611, 2004     

Bis(β‐ketoamino)copper(II)/methylaluminoxane systems for homo‐ and copolymerizations of methyl acrylate and 1‐hexene

Two bis(β‐ketoamino)copper [ArNC(CH₃)CHC(CH₃)O]₂Cu ( 1 , Ar = 2,6‐dimethylphenyl; 2 , Ar = 2,6‐diisopropylphenyl) complexes were synthesized and characterized. Homo‐ and copolymerizations of methyl acrylate (MA) and 1‐hexene with bis(β‐ketoamino)copper(II) complexes activated with methylaluminoxane (MAO) were investigated in detail. MA was polymerized in high conversion (>72%) to produce the syndio‐rich atactic poly(methyl acrylate), but 1‐hexene was not polymerized with copper complexes/MAO. Copolymerizations of MA and 1‐hexene with 1 , 2 /MAO produced acrylate‐enriched copolymers (MA > 80%) with isolated hexenes in the backbone. The calculation of reactivity ratios showed that r(MA) is 8.47 and r(hexene) is near to 0 determined by a Fineman‐Ross method. The polymerization mechanism was discussed, and an insertion‐triggered radical mechanism was also proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1113–1121, 2010     

Synthesis of novel copolymers obtained from acceptor/donor radical copolymerization of phosphonated allyl monomers and maleic anhydride

A series of four phosphonated‐bearing allyl monomers, that is, diethyl‐1‐allylphosphonate ( AP ), dimethyl‐1‐allyloxymethylphosphonate ( AOP ), 5‐ethyl‐5‐(allyloxymethyl)‐2‐oxo‐1,3,2‐dioxaphosphorinane ( AEDPH ), and 2‐benzyl‐5‐ethyl‐5‐(allyloxymethyl)‐2‐oxo‐1,3,2‐dioxaphosphorinane ( AEDPBn ) were synthesized. These monomers were then copolymerized by free radical polymerization in the presence of maleic anhydride, thus leading to alternated copolymers with phosphonate moieties. It was shown that both monomer conversion and reaction rate were dependent on the phosphonate moieties carried out by the allyl monomer: the bulkier the phosphonate group, the higher the polymerization rate. Thermogravimetric analysis of the copolymers revealed a high content of residue, also varying with the nature of the phosphonate moieties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Gas-Liquid Chromatography-Mass Spectrometry of Some Arene Tricarbonylchromium Complexes

Abstract

The gas-liquid chromatography-mass spectrometry of a number of arene tricarbonylchromium complexes has been investigated. The combined technique readily demonstrates that substituted benzene π-complexes survive the analysis intact, but a closely related compound, the tricarbonylchromium complex of 2,3-dimethylnaphthalene, has proven to be thermally unstable both on the column and in the molecular separator.     

Kinetics of radical copolymerization of [1‐(fluoromethyl)vinyl]benzene with chlorotrifluoroethylene

The synthesis of [1‐(fluoromethyl)vinyl]benzene (or α‐(fluoromethyl)styrene, FMB) and its radical copolymerization with chlorotrifluorethylene (CTFE), initiated by tert‐butyl peroxypivalate (TBPPi) are presented. The allyl monomer [H₂C = C(CH₂F)C₆H₅] was obtained by electrophilic fluorodesilylation of trimethyl(2‐phenylprop‐2‐en‐1‐yl)silane in 93% yield. A series of seven copolymerization reactions were carried out starting from initial [CTFE]₀/([FMB]₀ + [CTFE]₀) molar ratios ranging from 19.6 to 90.0 mol %. The molar compositions of the obtained poly(CTFE‐co‐FMB) copolymers were assessed by means of ¹⁹F nuclear magnetic resonance spectroscopy. Statistic copolymers were produced with molar masses ranging between 13,800 and 25,600 g/mol. From the Kelen and Tudos method, the kinetics of the copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_CTFE = 0.4 ± 0.2 and r_FMB = 3.7 ± 1.8 at 74 °C) showing that FMB is more reactive than CTFE as well as other halogenated or nonhalogenated monomers involved in the radical copolymerization with CTFE. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3843–3850, 2007     

Sulfobetaine zwitterionomers based on n‐butyl acrylate and 2‐ethoxyethyl acrylate: Monomer synthesis and copolymerization behavior

New materials with potential applications for adhesives and coatings, based on copolymers containing zwitterionic pendent groups, were investigated. n‐Butyl acrylate and 2‐ethoxyethyl acrylate were copolymerized with a series of five zwitterionic sulfobetaine monomers. The structure of the monomers was varied in terms of the zwitterion intercharge spacing and the bulkiness of the alkyl substituents at the quaternary ammonium unit. Four of the five zwitterionic sulfobetaine methacrylate (SBM) monomers used in the study were synthesized. An evaluation of the reactivity ratios for the copolymer systems was performed with programs based on statistically sound techniques such as the error‐in‐variables model and the nonlinear‐least‐squares method. Reactivity ratio estimates for all 10 comonomer pairs were obtained, and they showed clear variations in reactivity with the structure of the SBM. In general, the more hydrophobic the SBM was, the lower its reactivity was with respect to the acrylate monomers. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 511–523, 2002; DOI 10.1002/pola.10138     

Simulation and analysis of free radical branching copolymerization kinetics

Iｔｉｓｄｉｆｆｉｃｕｌｔａｎｄｅｖｅｎｉｍｐｏｓｓｉｂｌｅｔｏｄｅｔｅｒｍｉｎｅｂｙｒｅｇｕｌａｒｋｉｎｅｔｉｃｓｍｅｔｈｏｄｓｓｏｍｅｋｉｎｅｔｉｃｓｐａｒａｍｅｔｅｒｓｏｆｓｏｍｅｃｏｍｐｌｅｘｃｈｅｍｉｃａｌｒｅａｃｔｉｏｎｓ,ｅｓｐｅｃｉａｌｌｙｐｏｌｙｍｅｒｉｚａｔｉｏｎｒｅａｃｔｉｏｎｓｗｈｏｓｅｍｅｃｈａｎｉｓｍｓｈａｖｅｎｏｔｂｅｅｎｋｎｏｗｎ.Ｗｅｈａｖｅｔｒｉｅｄｔｏｓｏｌｖｅｔｈｉｓｐｒｏｂｌｅｍｂｙｔｈｅｍｅｔｈｏｄｏｆｒｅｇｒｅｓｓｉｏｎａｎｄｓｉｍｕｌａｔｉｏｎｏｆｃ…     

The mechanism of propagation in free‐radical copolymerization

A brief overview of free‐radical copolymerization kinetics is presented. Recent developments have highlighted the shortcomings of the terminal (or Mayo–Lewis) model. However, for many practical reasons, approximate models are useful for assisting our understanding of any given copolymerization reaction and allowing comparisons with the vast database on copolymerization reactions. Terminal model reactivity ratios have limited meaning, so it may be imprudent to use these values as a quantitative measurement of radical reactivity. Presently, experimental limitations restrict the amount of information that can be obtained by models being fitted to composition or propagation rate data; therefore, the direct measurement of radical reactivity is required together with high‐level quantum calculations. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 597–603, 2001     

Synthesis,polymerization, and effects on the flame retardancy of boron‐containing styrenic monomers

A boron‐containing styrenic monomer, 5‐benzyl‐2‐phenyl‐5‐(4‐vinylbenzyl)‐[1,3,2]‐dioxaborinane, was synthesized to study the influence of boron on the properties of the homopolymer and copolymer with styrene. A similar monomer without boron was also prepared and polymerized so that the properties of its polymer could be compared with the aforementioned boron‐containing polymers. These monomers were characterized by elemental analysis, mass spectrometry, Fourier transform infrared, and ¹H and ¹³C NMR. The thermal degradation of boron‐containing styrenic polymers was studied by means of Fourier transform infrared, which showed the presence of boric acid as char. The flame‐retardant effect was assessed by the measurement of the limiting oxygen indices and char yields during heating in nitrogen and air. The boron‐containing polymers had higher limiting oxygen indices and gave greater yields of char than those without boron. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem43: 6419–6430, 2005     

Highly Enantiomerically Enriched Planar Chiral Naphthalene Tricarbonylchromium Complexes

Lithiation/electrophile trapping reactions were carried out with the highly enantiomerically enriched complex [Cr(5‐bromonaphthalene)(CO)₃]. Electrophile quenching with ClPPh₂, PhCHO, and (Me₃SiO)₂ afforded the enantiomerically enriched (>97 % ee) planar chiral 5‐substituted naphthalene complexes with PPh₂, CH(Ph)OH, and OH substituents, respectively. Very mild Pd‐catalyzed Suzuki–Miyaura cross‐coupling reactions were developed and applied to the highly labile [Cr(5‐bromonaphthalene)(CO)₃] to give nine new planar chiral aryl‐, heteroaryl‐, alkynyl‐, and alkenylnaphthalene chromium complexes with high enantiomeric purity. The efficient ambient‐temperature coupling reactions with borinates prepared in situ were also applied to a number of chlorobenzene complexes and to aryl and vinyl halides.     

Bisphosphonate units in the main polymer chain: The first synthesis

Radical copolymerization of tetraethyl vinylidene phosphonate ( B ) with vinyl monomers has been described for the first time. In copolymerization with vinyl acetate ( V ) strictly alternating copolymer was formed even when [ V ]₀/[ B ]₀ was equal to 80. In copolymerization with acrylic acid ( A ) copolymers of the general structure ‐[( B )₁ A _x)]_n‐ were formed. The number of A units (x) was shown to depend on the [ A ]₀/[ B ]₀ ratio in the monomers feed. The reactivity ratio r_A was determined as equal to 2.1 and on this basis, the distribution of x as a function of [ A ]₀/[ B ]₀ was found. Bisphosphonic units were deblocked and the corresponding polyacids were analyzed by NMR spectra. M_n > 0.5 × 10⁶ were measured by SEC for copolymers of B with A . © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Porphyrin derivatives act as vinylene monomers in TEMPO‐mediated radical copolymerization with styrene

In this article, we offer clear evidence for the radical copolymerizability of porphyrin rings in 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐mediated radical copolymerizations with styrene. The radical copolymerizations of styrene with 5,10,15,20‐tetrakis(pentafluorophenyl)porphyrin (H₂TFPP) was conducted using 1‐phenyl‐1‐(2,2,6,6‐tetramethyl‐1‐piperidinyloxy)ethane as an initiator. The refractive index (RI) traces for the size‐exclusion chromatography of the resulting copolymers were unimodal with narrow molecular weight distributions. The RI traces shifted toward higher molecular weight regions as the polymerization progressed, and the number‐average molecular weights were close to those calculated on the basis of the feed compositions and monomer conversions. These features were in good agreement with a TEMPO‐mediated mechanism. The traces recorded by the ultraviolet‐visible (UV‐vis) detector (430 nm) were identical to those obtained by the RI detector, indicating a statistical copolymerization of styrene with H₂TFPP. This also indicated that H₂TFPP acted as a monomer and not as a terminator or a chain‐transfer agent under the conditions used. A benzyl radical addition to H₂TFPP was conducted as a model reaction for the copolymerization using tributyltin hydride as a chain‐transfer agent, affording a reduced porphyrin, 2‐benzyl‐5,10,15,20‐tetrakis(pentafluorophenyl)chlorin 1 , via radical addition to the β‐pyrrole position. The UV‐vis spectrum of 1 was fairly similar to that of poly(styrene‐co‐H₂TFPP), indicating that H₂TFPP polymerized at its β‐pyrrole position in the TEMPO‐mediated radical polymerization. TEMPO‐mediated radical copolymerizations of styrene with several porphyrin derivatives were also demonstrated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Copolymerization of 2‐isothiocyanatoethyl methacrylate and 2‐hydroxyethyl methacrylate or methacrylic acid based on a nucleophile‐tolerant property of the isothiocyanato group

Radical copolymerizations of 2‐isothiocyanatoethyl methacrylate (ITEMA) and 2‐hydroxyethyl methacrylate (HEMA) or methacrylic acid (MAA) were examined, and fundamental properties of the obtained copolymers were investigated. The copolymerizations of various ITEMA/HEMA or ITEMA/MAA compositions proceeded effectively in THF or DMF by using 2,2′‐azobisbutyronitrile (AIBN) as an initiator, keeping the isothiocyanato groups and hydroxyl or carboxyl groups unchanged. Glass transition temperatures (T_g)s of poly(ITEMA‐co‐HEMA)s ranged from 68 to 100 °C, and they were thermally stable up to 200 °C. Meanwhile, T_gs of poly(ITEMA‐co‐MAA)s (ITEMA/MAA = 91/9, 76/24) were determined to be 91 and 109 °C, respectively. However, poly(ITEMA‐co‐MAA)s were thermally unstable, and significant weight loss was observed around 180 °C, which may be due to an addition of carboxyl groups to isothiocyanato groups followed by an elimination of COS to form amide structure in the copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5221–5229     

Synthesis and photochromic properties of tricarbonylchromium complexes of 2H‐η6‐benzochromenes

Although in the 2H‐chromene (benzopyran) series complexation with tricarbonylchromium, under thermal conditions, is totally regioselective, in the naphthopyran series the same reaction cannot be observed. We show here that with tricarbonyl(trispyridine)chromium as complexing agent, in the presence of Lewis acid, complexation of naphthopyrans can be achieved and is totally regioselective. The complexes formed are photochromic compounds, and their thermal bleaching kinetic constants are reduced as compared with the non‐complexed homologous compound. Copyright © 2000 John Wiley & Sons, Ltd.     

Penultimate effect in radical copolymerization of 2‐trifluoromethylacrylates

Electron‐deficient 2‐trifluoromethylacrylates (TFMA) undergo radical copolymerization with electron‐rich norbornene derivatives, vinyl ethers, and styrene derivatives, which can be described by the penultimate model much better than by the commonly employed terminal model. In an attempt to directly observe the effect of the CF₃ group in the penultimate unit on the radical reactivity, we employed the Giese's mercury method. 4,4,4‐Trifluorobutyl and n‐butyl radicals produced from respective alkylmercuric chlorides were competitively reacted with t‐butyl 2‐trifluoromethylacrylate (TBTFMA) and t‐butyl methacrylate (TBMA) and the products analyzed with gas chromatography. While TBTFMA has been found to be about 24times more reactive than TBMA toward the n‐butyl radical, the former is about 12 times more reactive than the latter toward the 4,4,4‐trifluorobutyl radical. Thus, the reactivity of the propagating radical toward TBTFMA in comparison with TBMA is suppressed by a factor of two when the penultimate unit has the CF₃ group. We observed a sextet electron spin resonance of the TFMA propagating radical with a coupling constant of ca. 25 gauss between the β‐proton and β‐fluorine. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1559–1565, 2008     

Fluorinated and ring‐substituted bisbenzimidazole copper complexes for ethylene/acrylate copolymerization

Bisbenzimidazole copper dichloride complexes (CuBBIMs), when activated with methylaluminoxane, catalyze the random copolymerization of ethylene with acrylates to produce highly linear functional copolymers. To probe the sensitivity of the copolymerization to the catalyst structure, a series of CuBBIM catalysts with various steric, electronic, and geometric ligand characteristics was prepared, including CuBBIMs having benzimidazole ring substituents and ligand backbones of various lengths. Four different acrylates were also evaluated as comonomers (t‐butyl acrylate, methyl acrylate, t‐butyl methacrylate, and methyl methacrylate). Although no obvious ligand‐based influences on copolymerization were identified, the structure of the acrylate comonomer was found to exert significant effects. Copolymers prepared with t‐butyl methacrylate comonomer exhibited the highest ethylene contents (31–63%), whereas those prepared with methyl acrylate contained only minor amounts of ethylene (<15%). Copolymerizations carried out at lowered acrylate feed levels generally had increased ethylene contents but showed smaller yields, lowered molecular weights, and increased branching. Unusual ketoester structures were also observed in the methyl acrylate and methyl methacrylate containing copolymers, suggesting that the acrylate ester group size may be an important controlling factor for copolymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1817–1840, 2006