晶须增韧陶瓷基复合材料中微裂纹演化规律的描述

本文利用作者改进的等效夹杂理论和内容量理论，研究了晶须增韧陶瓷基复合材料中随机分布微裂纹的演化规律及其对材料力学性能的影响，同时考虑了热残余应变、晶须含量及长径比的影响，预报了材料的模量、非线性起始点、材料强度及非线性本构关系，给出了许多有意义的结论。     

压电压磁复合材料中正六边形孔边裂纹的反平面断裂问题

基于线性磁电弹性理论,利用Schwarz-Christoffel(CS)变换技术和Stroth公式,首次系统研究了压电压磁复合材料中含带两个不对称裂纹的正六边形孔口问题在部分渗透磁电边界条件下的解析解.当忽略磁场时,磁电非渗透裂纹和磁电渗透裂纹两种极端情况下的解析解答可退化为文献已有研究结果.数值结果揭示了正六边形孔口尺寸、裂纹长度以及力电载荷和磁载荷对能量释放率的影响规律.研究结果表明：减小孔口边长和裂纹长度可以提高材料的可靠性;机械载荷总是促进裂纹扩展;在磁电非渗透和磁电部分渗透边界条件下,负电场和负磁场会延缓裂纹的扩展,而正电场可以增强或阻碍裂纹的扩展,这取决于所施加的电场和磁场的强度以及机械载荷的水平;在磁电渗透边界条件下,电场和磁场对裂纹的扩展没有影响.     

纤维增强复合材料圆柱型界面裂纹分析

以裂纹面上的位错函数为未知量将圆柱型界面裂纹问题化成一组奇异积分方程的求解问题．应用Ｍｕｓｋｈｅｌｉｓｈｖｉｌｉ的奇异积分方程理论，分析了圆柱型界面裂纹尖端应力场．针对裂纹尖端分别存在和不存在接触区两种情况，确定了裂纹尖端应力场的奇异性．利用数值方法计算了圆柱型界面裂纹尖端接触区尺寸对剪应力强度因子的影响．     

微裂纹损伤对复合材料层板分层的影响

本文将双标量损伤模型推广,考虑层内及层间微裂纹损伤相互作用,建立了层合复合材料的多标量损伤本构关系,并将该本构关系应用于含贯穿分层层板的后屈曲分析,采用准三维有限元法研究了分层尖端场与极限损伤区演变的特点,结果表明：损伤导致裂尖区层间应力奇异性消失,引起层间应力重新分布;损伤区的发展方向取决于分层上下表面层的铺设角,能量释放率不能反映损伤和分层扩展特征,因而有必要建立基于损伤演化的分层扩展准则。     

纤维增强复合材料的轴对称横向裂纹分析

从弹性力学解出发,借助积分变换将纤维和基体内的位移场和应力表示成以裂纹面上位错函数为未知量的积分形式。由边界条件纤维增强复合材料三维轴对称裂纹问题化成求解一组奇异积分方程的问题。     

含弧形裂纹复合陶瓷强度的尺度效应

认为含弧形裂纹复合陶瓷由随机方向的三相胞元与有效介质构成,用细观力学的方法研究了复合陶瓷的损伤失效和强度。首先确定三相胞元的外载应变,再依据复合陶瓷在损伤过程中的细观应力场和广义热力学力,计算出三相胞元内基体和颗粒的损伤等效应力,当基体和颗粒的损伤等效应力分别等于两者的极限应力时,得到基体和颗粒的破坏应力。然后,根据混合型应力强度因子计算弧形裂纹扩展时的能量释放率,进而得到界面的破坏应力。最后综合考虑基体、颗粒和和界面损伤影响,获得含弧形裂纹复合陶瓷的宏观强度及其尺度效应。     

Z—pins增强陶瓷基复合材料单搭接接头的裂纹尖端能量释放率

对典型Z-pins增强陶瓷基复合材料单搭接接头的裂纹尖端能量释放率进行了数值模拟,重点研究Z-pins在不同直径和间距下裂纹尖端能量释放率随裂纹扩展的变化规律.研究发现能够形成桥联的Z-pins具有一定抑制开裂的能力,形成桥联后,Z-pins的直径对于裂纹尖端能量释放率的影响较大,而Z-pins的间距对于裂纹尖端能量释放率也有影响,但当间距小到某一限度时,再减小间距裂纹尖端能量释放率基本保持不变.     

弹性半平面中边界裂纹研究的新方法

讨论了载荷作用在裂纹面上的弹性半平面边界裂纹问题.研究以线弹性断裂力学为基础,采用复变函数方法以及Riemann-Hilbert(R-H)边值问题的一般理论,将问题分拆为含有限裂纹的全平面问题与无裂纹的半平面问题的叠加,计算得到裂纹尖端的应力强度因子.与文献结果比较,该方法具有精度高的优点.     

纤维增强陶瓷基复合材料的D失效判据

经典唯象强度理论适用于正交各向异性线弹性体.对于非线性纤维增强复合材料,通过加卸载试验和损伤力学的分析方法,可以得到一种虚拟的线性化应力-应变关系;依据损伤等效假设,针对线性损伤和非线性损伤,对基于应力的经典二次失效准则进行变换,建立了一种基于损伤的强度理论,即"D失效判据",这一强度理论可以作为经典判据的补充和扩展.针对平纹编织C/SiC复合材料的拉/剪组合试验,进行了实例计算,结果表明:利用D失效判据预测的失效包络线比蔡-希尔准则的预测曲线低,而且,失效曲线的形式与材料的损伤演化规律相关.     

压电效应下一维六方准晶双材料孔边裂纹的反平面问题研究

利用复变函数方法和保角变换技术研究了压电效应下一维六方准晶双材料中圆孔边单裂纹的反平面问题．考虑电不可渗透型边界条件,运用保角变换和Stroh公式得到了弹性体受远场剪切力和面内电载荷作用下裂纹尖端应力强度因子和能量释放率的解析解. 数值算例分析了几何参数、远场受力、电位移载荷对能量释放率的影响．结果表明：裂纹长度、耦合系数和远场剪切力的减小可以抑制裂纹的扩展．不考虑电场时,声子场应力对能量释放率的影响较小．本文的研究结果可作为研究一维六方压电准晶双材料孔边裂纹问题的理论基础,同时为压电准晶及其复合材料的设计、制备、优化和性能评估提供理论依据．     

Analysis of a bi-piezoelectric ceramic layer with an interfacial crack subjected to anti-plane shear and in-plane electric loading

The behaviour of a bi-piezoelectric ceramic layer with a centre interfacial crack subjected to anti-plane shear and in-plane electric loading has been studied. The dislocation density functions and the Fourier integral transform method have been employed to eliminate the problem of singular integral equations. The normalized energy release rate, stress and electrical displacement intensity factors, G/G₀,K_III/K_III0 and K_D/K_D0, respectively, were determined for different geometric and property parameters by use of two different crack surface electric boundary conditions, i.e. impermeable and permeable. It has been shown that the effects of the thickness and material constants of the piezoelectric layer on all the three parameters, i.e. G/G₀,K_III/K_III0 and K_D/K_D0 were significant.     

Anti-plane analysis of semi-infinite crack in piezoelectric strip

Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.     

拉伸荷载下分支裂隙破坏机理研究

为研究拉伸荷载下分支裂隙对破坏模式的影响,保持主裂隙参数不变,改变分支裂隙倾角和长度,利用扩展有限元方法模拟了弯折裂隙的动态扩展,总结了分支裂隙参数变化对破坏模式的影响.利用ABAQUS中的轮廓积分计算了分支裂隙尖端应力强度因子,并根据最大周向应力准则计算起裂角.结果表明:拉伸荷载下分支裂隙出现三种破坏模式;分支裂隙倾...     

Stress state of a piezoelectric ceramic body with a plane crack under antisymmetric loads

The static equilibrium of an electroelastic transversely isotropic space with a plane crack under antisymmetric mechanical loads is studied. The crack is located in the plane of isotropy. Relationships are established between the stress intensity factors (SIFs) for an infinite piezoceramic body and the SIFs for a purely elastic body with a crack of the same form under the same loads. This makes it possible to find the SIFs for an electroelastic body without the need to solve specific electroelasitc problems. As an example, the SIFs are determined for a piezoelastic body with penny-shaped and elliptic cracks under shear __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 2, pp. 32–42, February 2006.     

Electroelastic analysis of a penny-shaped crack in a piezoelectric ceramic under mode I loading

Following the theory of linear piezoelectricity, we consider the electroelastic problem for a piezoelectric ceramic with a penny-shaped crack under mode I loading. The problem is formulated by means of Hankel transform and the solution is solved exactly. The stress intensity factor, energy release rate and energy density factor for the exact and impermeable crack models are expressed in closed form and compared for a P-7 piezoelectric ceramic. Based on current findings, we suggest that the energy release rate and energy density factor criteria for the exact crack model are superior to fracture criteria for the impermeable crack model.     

Anti-plane analysis on a finite crack in a one-dimensional hexagonal quasicrystal strip

The anti-plane fracture problem for a finite crack in a one-dimensional hexagonal quasicrystal strip is analyzed. By using Fourier transforms, the mixed boundary value problems are reduced to the dual integral equations. The solution of the dual integral equations is then expressed by the complete elliptic integrals of the first and the third kinds. The expressions for stress, strains, displacements and field intensity factors of the phonon and phason fields near the crack tip are obtained exactly. The path-independent integral derived by a conservation law equals the energy release rate, which can be used as a fracture criterion for a mode III fracture problem.     

A Mode- II Griffith Crack in Decagonal Quasicrystals

By using the method of stress functions, the problem of mode-II Griffith crack in decagonal quasicrystals was solved. First, the crack problem of two-dimensional quasicrystals was decomposed into a plane strain state problem superposed on anti-plane state problem and secondly, by introducing stress functions, the18 basic elasticity equations on coupling phonon-phason field of decagonal quasicrystals were reduced to a single higher-order partial differential equations. The solution of this equation under mixed boundary conditions of mode-II Griffith crack was obtained in terms of Fourier transform and dual integral equations methods. All components of stresses and displacements can be expressed by elemental functions and the stress intensity factor and the strain energy release rate were determined. Biography: GUO Yu-cui (1962-), Associate professor, Doctor     

Analysis of complex stress intensities for cracked laminates

ＡＮＡＬＹＳＩＳＯＦＣＯＭＰＬＥＸＳＴＲＥＳＳＩＮＴＥＮＳＩＴＩＥＳＦＯＲＣＲＡＣＫＥＤＬＡＭＩＮＡＴＥＳＨｕＨｕｒａｎｇ（胡互让）;ＷｕＣｈｅｎｇｐｉｎｇ（吴承平）（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａｌ．ＡｅｒｏｓｐａｃｅａｎｄＭａｎｕｆａ...     

On the stress state of a piezoceramic body with a flat crack under symmetric loads

A static-equilibrium problem is solved for an electroelastic transversely isotropic medium with a flat crack of arbitrary shape located in the plane of isotropy. The medium is subjected to symmetric mechanical and electric loads. A relationship is established between the stress intensity factor (SIF) and electric-displacement intensity factor (EDIF) for an infinite piezoceramic body and the SIF for a purely elastic material with a crack of the same shape. This allows us to find the SIF and EDIF for an electroelastic material directly from the corresponding elastic problem, not solving electroelastic problems. As an example, the SIF and EDIF are determined for an elliptical crack in a piezoceramic body assuming linear behavior of the stresses and the normal electric displacement on the crack surface __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 11, pp. 67–77, November 2005.