Selective uptake of different proteins by annealed and quenched cationic spherical polyelectrolyte brushes

The selective uptake of bovine serum albumin (BSA) and β-glucosidase (β-G) by annealed and quenched cationic spherical polyelectrolyte brushes (SPB) was systematically studied by combining turbidimetric titration, dynamic light scattering and small angle X-ray scattering (SAXS). These two kinds of SPB consist of a same polystyrene core and a dense shell of poly (2-aminoethyl methacrylate hydrochloride) (PAEMH) and poly [2-(methacryloyloxy) ethyl] trimethylammonium chloride (PMAETA), respectively. Results reveal that the adsorption/desorption of proteins on SPB can be easily controlled by changing external conditions (pH and ionic strength). For a particular annealed or quenched SPB, there is a significant difference of the interaction pH regions between the brush and the two proteins, and this difference can be tuned by ionic strength. At low ionic strength, quenched brushes were more suitable for selective adsorption of BSA and β-G, while annealed brushes performed better at high ionic strength. SAXS analysis demonstrated that volume exclusion effect played a remarkable role in protein uptake by both SPB, and larger proteins were more likely to be adsorbed on the outer layer of the brush. The unique core-shell structure and controllable chain types make SPB an excellent candidate in selective adsorption/separation of proteins of different sizes.     

High catalytic activity of platinum nanoparticles immobilized on spherical polyelectrolyte brushes

We present a study on the catalytic activity of platinum nanoparticles immobilized on spherical polyelectrolyte brushes that act as carriers. The spherical polyelectrolyte brushes consist of a solid core of poly(styrene) onto which long chains of poly(2-methylpropenoyloxyethyl) trimethylammonium chloride are grafted. These positively charged chains form a dense layer of polyelectrolytes on the surface of the core particles ("spherical polyelectrolyte brush") that tightly binds divalent PtCl6-(2) ions. The reduction of these ions within the brush layer leads to nearly monodisperse nanoparticles of metallic platinum. The average size of the particles is approximately 2 nm. The composite particles exhibit excellent colloidal stability. The catalytic activity is investigated by photometrically monitoring the reduction of p-nitrophenol by an excess of NaBH4 in the presence of the nanoparticles. The kinetic data could be explained by the assumption of a pseudo-first-order reaction with regard to p-nitrophenol. In all cases, a delay time t0 has been observed, after which the reactions start. This time is shorter when the catalyst has already been used. All data demonstrate that spherical polyelectrolyte brushes present an ideal carrier system for metallic nanoparticles.     

Wetting transition on hydrophobic surfaces covered by polyelectrolyte brushes

We study the wetting by water of complex "hydrophobic-hydrophilic" surfaces made of a hydrophobic substrate covered by a hydrophilic polymer brush. Polystyrene (PS) substrates covered with polystyrene- block-poly(acrylic acid) PS- b-PAA diblock copolymer layers were fabricated by Langmuir-Schaefer depositions and analyzed by atomic force microscopy (AFM) and ellipsometry. On bare PS substrate, we measured advancing angles theta A = 93 +/- 1 degrees and receding angles theta R = 81 +/- 1 degrees . On PS covered with poorly anchored PS- b-PAA layers, we observed large contact angle hysteresis, theta A approximately 90 degrees and theta R approximately 0 degrees , that we attributed to nanometric scale dewetting of the PS- b-PAA layers. On well-anchored PS- b-PAA layers that form homogeneous PAA brushes, a wetting transition from partial to total wetting occurs versus the amount deposited: both theta A and theta R decrease close to zero. A model is proposed, based on the Young-Dupre equation, that takes into account the interfacial pressure of the brush Pi, which was determined experimentally, and the free energy of hydration of the polyelectrolyte monomers Delta G PAA (hyd), which is the only fitting parameter. With Delta G PAA (hyd) approximately -1300 J/mol, the model renders the wetting transition for all samples and explains why the wetting transition depends mainly on the average thickness of the brush and weakly on the length of PAA chains.     

On the mechanism of uptake of globular proteins by polyelectrolyte brushes: a two-gradient self-consistent field analysis

We present model calculations for the interaction of a protein-like inhomogeneously charged nanoscale object with a layer of densely grafted polyelectrolytes ("polyelectrolyte brush"). The motivation of this work is the recent experimental observation that proteins that carry an overall negative charge are absorbed into negatively charged polyelectrolyte brushes. Two-gradient self-consistent field (2G-SCF) calculations have been performed to unravel the physical mechanism of the uptake of protein thus effected. Our results prove that an overall neutral, protein-like object can electrostatically be attracted and therefore spontaneously driven into a polyelectrolyte brush when the object has two faces (patches, domains), one with a permanent positive charge and the other with a permanent negative charge. Using a 2G-SCF analysis, we evaluate the free energy of insertion, such that the electric dipole of the inclusion is oriented parallel to the brush surface. An electroneutral protein-like object is attracted into the brush because the polyelectrolyte brush interacts asymmetrically with the charged patches of opposite sign. At high ionic strength and low charge density on the patches, the attraction cannot compete with the repulsive excluded-volume interaction. However, for low ionic strengths and sufficiently high charge density on the patches, a gain on the order of k(B)T per charge becomes possible. Hence, the asymmetry of interaction for patches of different charges may result in a total attractive force between the protein and the brush. All results obtained herein are in excellent agreement with recent experimental data.     

Dumbbell-shaped polyelectrolyte brushes studied by depolarized dynamic light scattering

We present the synthesis and comprehensive characterization of dumbbell-shaped polyelectrolyte brushes (DPB). The core of these particles consists of poly(methyl methacrylate) (PMMA) and poly(styrene) onto which a dense brush shell of poly(styrene sulfonate) is grafted. The morphology of DPB particles is studied in solution by cryogenic-transmission electron microscopy. We demonstrate that well-defined DPB are generated that react to external stimuli such as surfactant and salt concentration. The rotational diffusion and collective relaxations of the DPB particles were monitored by depolarized dynamic light scattering (DDLS). Here we found a new relaxation mode in the DDLS-signal that can be ascribed to collective fluctuations of the polyelectrolyte layer affixed to the surface of the dumbbells.     

Formation of surface-attached microstructured polyelectrolyte brushes

Surface-attached micropattemed polyelectrolyte brushes on planar solid surfaces are generated using free radical polymerization photo-initiated by self-assembled initiator monolayers. It is shown that the formed patterns can be either negative or positive with different patterning processes.     

Controlled growth of triblock polyelectrolyte brushes

We have achieved a significant breakthrough in the synthesis of polyelectrolyte brushes of controlled thickness and density, which has been demonstrated by the synthesis of triblock copolymer brushes composed of cationic, neutral, and anionic segments.     

High elongation of polyelectrolyte chains in the osmotic limit of spherical polyelectrolyte brushes: a study by cryogenic transmission electron microscopy

We investigate the conformation of long polyelectrolyte chains attached to colloidal latex particles by cryogenic transmission electron microscopy (cryo-TEM). The dense grafting of the polyelectrolyte chains ("polyelectrolyte brush") leads to a confinement of the counterions and a concomitantly high osmotic pressure within the polyelectrolyte layer attached to the core particles. Cryo-TEM has provided first model-independent direct proof for the strong stretching of the polyelectrolyte chains by direct visualization. If salt is added, cryo-TEM clearly shows how chains collapse because of the strong screening of the electrostatic interaction. Moreover, the analysis of interacting particles by cryo-TEM shows that the polyelectrolyte chains retract at close contact. Hence, we demonstrate how cryo-TEM can be used to analyze directly the spatial structure of polyelectrolyte brushes in situ.     

Highly reversible and multi-stage cantilever actuation driven by polyelectrolyte brushes

Microcantilever bending can be reversibly driven by conformational changes of phosphate containing polyelectrolyte brushes when exposed to different pH or salt solutions. The deflection of the cantilevers allows a detailed analysis of the properties of polymer brushes, while these systems are also a first step toward polymer-based nanoactuators.     

Analysis of spherical polyelectrolyte brushes by small angle X-ray scattering

Spherical polyelectrolyte brushes （SPBs） with PS core and poly（acrylic acid） （PAA） brushes were prepared and analyzed by SAXS in this article. A radial electron density profile of SPB was brought up, which fits well with the SAXS result and shows a core-shell structure. The effect of pH on SPB form was represented by SAXS and it proves that the chains of SPB will stretch in response to increased pH owning to the increased electrostatic repulsion. SPBs immobilized with magnetic nanoparticles or bovine serum albumin （BSA） were prepared and analyzed by SAXS as well. SAXS could characterize the changes of electron density inside brushes of SPBs due to the immobilization of magnetic nanoparticles or BSA. This provides significant supports for further application of immobilized metal nanoparticles or proteins.     

Salt-regulated attraction and repulsion of spherical polyelectrolyte brushes towards polyelectrolyte multilayers

Adsorption of colloidal particles presents an interesting alternative to the modification of surfaces using covalent coupling or physisorption of molecules. However, to tailor the properties of these materials full control over the effective particle-substrate interactions is required. We present a systematic investigation of the adsorption of spherical polyelectrolyte brushes (SPB) onto polyelectrolyte multilayers (PEM). A brush layer grafted from colloidal particles allows the incorporation of various functional moieties as well as the precise adjustment of their adsorption behaviour. In the presence of oppositely charged surfaces the amount of adsorbed SPB monotonically increases with the ionic strength, whereas equally charged substrates efficiently prevent colloidal attachment below a threshold salt concentration. We found that the transition from the osmotic to the salted brush regime at approximately 100 mM coincided with a complete loss of substrate selectivity. In this regime of high ionic strength, attractive secondary interactions become dominant over electrosteric repulsion. Due to the soft polyelectrolyte corona a surface coverage exceeding the theoretical jamming limit could be realized. Both the adsorption kinetics and the resulting thin film morphologies are discussed. Our study opens avenues for the production of two-dimensional arrays and three-dimensional multilayered structures of SPB particles.     

Ionic effects in collapse of polyelectrolyte brushes

We investigated the effect of counterion valence on the structure and swelling behavior of polyelectrolyte brushes using a nonlocal density functional theory that accounts for the excluded-volume effects of all ionic species and intrachain and electrostatic correlations. It was shown that charge correlation in the presence of multivalent counterions results in collapse of a polyelectrolyte brush at an intermediate polyion grafting density. At high grafting density, the brush reswells in a way similar to that in a monovalent ionic solution. In the presence of multivalent counterions, the nonmonotonic swelling of a polyelectrolyte brush in response to the increase of the grafting density can be attributed to a competition of the counterion-mediated electrostatic attraction between polyions with the excluded-volume effect of all ionic species. While a polyelectrolyte brush exhibits an "osmotic brush" regime at low salt concentration and a "salted brush" regime at high salt concentration regardless of the counterion valence, we found a smoother transition as the valence of the counterions increases. As observed in recent experiments, a quasi-power-law dependence of the brush thickness on the concentration ratio can be identified when the monovalent counterions are replaced with trivalent counterions at a fixed ionic strength.     

Periodic swelling and collapse of polyelectrolyte brushes driven by chemical oscillation

Poly(acrylic acid) (PAA) chains exhibit conformational change in response to pH, whereas bromate-sulfite-ferrocyanide (BSF) solution shows pH oscillation between 3.2 and 6.6. By use of quartz crystal microbalance with dissipation (QCM-D), we have investigated the pH induced conformational change of PAA brushes under a continuous flow of BSF solution in real time. The changes in frequency and dissipation clearly indicate the periodic swelling and collapse of brushes with pH oscillation. The changes in thickness, viscosity, and elastic modulus further indicate the oscillation of the interface.     

Surface friction of hydrogels with well-defined polyelectrolyte brushes

Hydrogels of poly(2-hydroxyethyl methacrylate) (PHEMA) with well-defined polyelectrolyte brushes of poly(sodium 4-styrenesulfonate) (PNaSS) of various molecular weights were synthesized, keeping the distance between the polymer brushes constant at ca. 20 nm. The effect of polyelectrolyte brush length on the sliding friction against a glass plate, an electrorepulsive solid substrate, was investigated in water in a velocity range of 7.5 x 10(-5) to 7.5 x 10(-2) m/s. It is found that the presence of polymer brush can dramatically reduce the friction when the polymer brushes are short. With an increase in the length of the polymer brush, this drag reduction effect only works at a low sliding velocity, and the gel with long polymer brushes even shows a higher friction than that of a normal network gel at a high sliding velocity. The strong polymer length and sliding velocity dependence indicate a dynamic mechanism of the polymer brush effect.     

Interactions of polyelectrolyte brushes with oppositely charged surfactants

Using Brownian dynamics simulations, we study the effect of the charge ratio, the surfactant length, and the grafting density on the conformational behavior of the complex formed by the polyelectrolyte brush with oppositely charged surfactants. In our simulations, the polyelectrolyte chains and surfactants are represented by a coarse-grained bead-spring model, and the solvent is treated implicitly. It is found that varying the charge ratio induces different morphologies of surfactant aggregates adsorbed onto the brush. At high charge ratios, the density profiles of surfactant monomers indicate that surfactant aggregates exhibit a layer-by-layer arrangement. The surfactant length has a strong effect on the adsorption behavior of surfactants. The lengthening of surfactant leads to a collapsed brush configuration, but a reswelling of the brush with further increasing the surfactant length is observed. The collapse of the brush is attributed to the enhancement of surfactants binding to polyelectrolyte chains. The reswelling is due to an increase in the volume of adsorbed surfactant aggregates. At the largest grafting density investigated, enhanced excluded volume interactions limit the adsorption of surfactant within the polyelectrolyte brush. We also find that end monomers in polyelectrolyte chains exhibit a bimodal distribution in cases of large surfactant lengths and high charge ratios.     

Electrochemical characteristics of polyelectrolyte brushes with electroactive counterions

Cyclic voltammetry (CV) was employed to characterize the electrochemical behavior of polyelectrolyte brushes with immobilized electroactive counterions in response to external changes in concentration and composition of the supporting electrolyte and as a function of brush thickness. Poly(methacryloyloxy)ethyl-trimethyl-ammonium chloride (PMETAC) brushes were synthesized on Au substrates via atom transfer radical polymerization followed by ion-exchange with ferricyanide ions ([Fe(CN)6]3-) as redox probes. CV measurements of the modified PMETAC brushes showed the typical electrochemical response corresponding to a surface-confined electroactive species and the redox counterions, as [Fe(CN)6]3- species form stable ion pairs with the quaternary ammonium groups of the brush. The electron-transfer features of PMETAC brushes with different thicknesses, as characterized by CV and UV-vis spectroscopy, revealed that the charge density probed by CV was lower than the charge density measured by UV-vis spectroscopy. The electrode current decreased significantly with increasing concentration of supporting electrolyte due to the effect of the Donnan potential. Hydrophobic counterions, ClO4-, which induced brush collapse, lead to significantly reduced electrode currents.     

Interaction of dissolved proteins with spherical polyelectrolyte brushes

We consider the adsorption of bovine serum albumin (BSA) on spherical polyelectrolyte brushes (SPB). The SPB consist of a solid polystyrene core of 100nm diameter onto which linear polyelectrolyte chains (poly(acrylic acid), (PAA)) are grafted. The adsorption of BSA is studied at a pH of 6.1 at different concentrations of added salt and buffer (MES). We observe strong adsorption of BSA onto the SPB despite the effect that the particles as well as the dissolved BSA are charged negatively. The adsorption of BSA is strongest at low salt concentration and decreases drastically with increasing amounts of added salt. The adsorbed protein can be washed out again by raising the ionic strength. The various driving forces for the adsorption are discussed. It is demonstrated that the main driving force is located in the electrostatic interaction of the protein with the brush layer of the particles. All data show that the SPB present a new class of carrier particles whose interaction with proteins can be tuned in a well-defined manner.     

Entropic death of nonpatterned and nanopatterned polyelectrolyte brushes

The stability of nonpatterned and nanopatterned strong polyelectrolyte brushes (PEBs) is studied as a function of both brush character and the properties of a contacting liquid. High‐molecular‐weight PEBs of poly(4‐methyl vinylpyridinium iodide) (PMeVP) are synthesized using surface‐initiated radical‐chain polymerization. Nanopatterned brushes (NPBs) line with pattern sizes ranging from 50 to 200 nm are generated by patterning the initiator layer using deep‐ultraviolet photolithography followed by brush growth initiated from the patterned layer. Homogeneous PEBs with different degrees of charging and grafting densities are exposed to water and salt solutions with different temperatures for different periods. The degradation is monitored through dry‐state ellipsometry and atomic force microscopy measurements. Enhanced degrafting for more strongly swollen polymer brushes can be observed in agreement with an “entropic spring” model. Based on the results of the nonpatterned brushes, the NPBs are exposed to water at different temperatures and external salt content for varying periods of time. Counterintuitively, the NPBs show increased degrafting for smaller patterns, which is attributed to different polymer chain dynamics for nanobrushes and microbrushes. We investigate the influence of thermodynamic and kinetic parameters on the stability of (nanopatterned) PEBs and discuss the role of entanglements and formation of complexes in such films. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1283–1295