,-Difluoroketone inhibitors of HMG CoA reductase

The rationale for a new class of HMG CoA reductase inhibitors, represented by ,ga-difluoroketones 3 and 4, is described. The syntheses of 3, 4, and their nonfluorinated analogue 5 are presented.     

-mononitroalkyl derivatives of indium

Dealkylation of trialkylindium by -mononitroalkane leads to the formation of the previously unknown -nitroalkyl derivatives of indium. An investigation of the chemical properties and of the ¹¹⁵In nuclear quadrupole resonance spectra of these compounds has been undertaken. An analysis of the data obtained from these investigations suggests the existence of intramolecular O→In coordination in the -nitroalkyl derivatives of indium.     

-Fluoro decalones as chiral epoxidation catalysts: fluorine effect

Three rigid monofluorinated trans-decalones 4a, 5e, and 6e (90% ee) have been synthesized from commercially available (−)-(R)-methyl naphthalenone (90% ee). Their structures have been fully characterized (NMR, X-ray): ketones 4a and 5e are Me,F-disubstituted to the carbonyl with the fluorine axial and equatorial, respectively, while ketone 6e is F-monosubstituted to the carbonyl with the fluorine equatorial. The use of these ketones as chiral catalysts for the epoxidation of trans-olefins (such as stilbene, β-methylstyrene and p-methoxy cinnamate) through the formation of dioxiranes shows (i) that dioxiranes with an equatorial fluorine to the dioxirane ring are less reactive and provide lower ee’s than dioxiranes with an axial fluorine and having the same chirality and (ii) that an axial methyl to the dioxirane ring is significantly less efficient than a fluorine. The results corroborate Armstrong and Houk’s theoretical model and our first hypothesis to rationalize the inverted enantioselectivities observed using -fluorinated cyclohexanones having the same chirality, i.e.: rapid ring inversion (Curtin–Hammett principle) allows the dioxirane conformation to have the fluorine axial (even if less populated than the other) to contribute significantly to the epoxidation reaction.     

-Halogenoketones—XIII Chromone epoxides; their synthesis and acid-catalysed rearrangement

The chromone epoxide ring system has been synthesised. Base-catalysed cyclization and dehydrobromination of -bromo-o-acyl (aroyl) oxyacetopheones or 2-bromo-1, 3-diones yielded 3-substituted chromone epoxides. Acid-catalysed rearrangement of a 2-methylchromone epoxide in an aprotic solvent gave a 2-methylenech-romanonol, while a 3-methoxymethylchromone epoxide fragmented to chromonol under these conditions; in alchols, chromone epoxides gave 2-alkoxychromanonols.     

-Halogenoketones—XIV Studies in the chemistry of 2'-hydroxyacrylophenones

An initial study of the side-chain unsubstituted 2'-hydroxyacrylophenone system shows it to have a considerably greater propensity for intermolecular addition than the comparable 2'-hydroxychalcone system, readily undergoing base-catalysed addition of, for example, alcohol and thereby diverting typical chalcone reactions requiring alcoholic alkali. 2'-Acetoxyacrylophenone dibromides and bromoalkoxides cyclize with base to chromone epoxides as do 2'-acetoxy--bromoacrylophenones in alcoholic alkali.     

-(1-phenylhydrazino)-alkanone phenylhydrazones: The reaction with carbonyl compounds

The unsymmetrically disubstituted hydrazines 1 were condensed with carbonyl compounds. Some of the expected condensation products were isolated, but some were formed as unstable intermediates which underwent 1,4-elimination: The phenylhydrazone of the carbonyl compound used was obtained, together with the corresponding phenylazo-alkene 11 or alternatively, the 1,4-addition product of a different protic nucleophile to 11.     

-Cyclisation of tertiary amines. Part 4. Cyano-imidoyl substituted furans from captodative enamines and dibenzoylacetylene

-Cyano-enamines and dibenzoylacetylene lead to dienes (via [2+2] cycloaddition followed by ringopening). Their -Cyclisation to oxygen produces the title compounds.     

,β-unsaturated oximes Isoxazoline formation by thermal cyclisation of compounds related to benzalacetophenone oxime and isoxazoline thermal cycloreversion reactions

At about 300° the title compounds yield fragments attributed to cyclisation to isoxazolines and subsequent cycloreversion. Isoxazolines are formed at about 200° and can usually be isolated. At 300° they yield the same products as the oximes.

Thus benzalacetophenone oxime gives 3,5-diphenylisoxazoline which then largely undergoes two distinct cycloreversions: (a) 1,3-cleavage (numbers refer to isoxazoline bonds) yielding benzonitrile and acetophenone and (b) reductive 1,4-cleavage yielding benzaldehyde and 1-phenylethylimine hydrolysis products. By-products are 2,4,6-triphenylpyridine, water and ammonium benzoate. With -methylchalcone oxime reductive 1,4-cleavage is suppressed and with β-methylchalcone oxime both modes of cleavage are suppressed and 5-methyl-3,5-diphenylisoxazole is the stable product. An analogue of -methylchalcone oxime, 2-methyl-1-phenyl-3-(2-thienyl)prop-2-ene-1-one oxime gives fragments attributed to both cleavage modes of an unisolatable and hitherto unknown isoxazoline.

Possible mechanisms for the cyclisation and cycloreversions are discussed and the reductive 1,4-cleavage is believed to be a cycloreversion of a vinyl-nitrene.     

- and β-cyclodextrin complexes with n-alkyl carboxylic acids and n-alkyl p-hydroxy benzoates. A molecular mechanics study of 1:1 and 1:2 associations

Molecular mechanics (MM) methods were employed to evaluate stabilization upon formation of inclusion compounds between two different guest molecules and - and β-cyclodextrins (CDs) for two different stoichiometries 1:1 and 1:2. The two guest molecules studied were n-alkyl carboxylic acids and n-alkyl p-hydroxy benzoates with variety of chain lengths. The computed stability for the inclusion compounds between -CDs and n-alkyl carboxylic acids reproduced experimental data reported in the literature. The transition between 1:1/1:2 complexes occurred at an alkyl chain length of n_C=9. It was previously demonstrated by diffusion coefficients measures that a stable 1:2 stoichiometry inclusion compound could be formed between n-alkyl p-hydroxy benzoates and -CD for the chain length n_C>4. The computed results reproduced the experimental ones. The combination between OPLS and GB/SA resulted in better agreements with experiments than those obtained with MM2 and MM3.     

Boron trifluoride-catalyzed degradation of poly--caprolactone at ambient temperature

Poly--caprolactone (PCL) can be accelerated to degrade in the presence of boron trifluoride at ambient temperature. The degradation behaviors were studied by using the inherent viscosity measurement, gel permeation chromatography (GPC), infrared analysis (FTIR), nuclear magnetic resonance analysis (NMR), and thermal analysis (DSC). With increasing the addition amount of boron trifluoride, the molecular weight of PCL decreases; the molecular weight distribution is broadened; and the degree of crystallinity of PCL increases at first at low BF₃ level, then decreases when BF₃ content exceeds to 2.64 wt%. The results of IR, ¹HNMR and GPC reveal that -caprolactone monomer does not occur and the main degradation products are the oligomers of PCL with low molecular weight. The mechanism for boron trifluoride-catalyzed degradation of PCL is discussed.     

In memoriamMichell J. Sienko

Calcium urate hexahydrate, Ca(C₅H₃O₃N₄)₂ · 6H₂O, has been synthesized for the first time. A tentative assignment of some infrared and Raman bands is given by referring to the isotopic frequency shifts, group frequency considerations, Raman intensities as well as to the spectrum of potassium salt. The spectroscopic data suggest that there are, at least, two types of water molecules in the unit cell. Centrosymmetric unit cell is proposed to explain the spectral features of this compound. X-Ray powder diffraction data are also given.     

Blue-shifting intramolecular CH O(S) contacts in sterically strained systems

A group of model systems which may form chelate-type structures with intramolecular CH  Y (Y = O, S) contact is investigated computationally. The existence of several conformers permits to identify a reference molecule without the CH  Y intramolecular contact and to establish the blue-shifting character of this interaction. The CH stretching frequency in chelate forms is found to increase with respect to its value in the reference system. A parallel decrease of the CH bond distance is also established. The blue-shifting character of the intramolecular CH  Y contact is interpreted in terms of the sterically enforced repulsion between the hydrogen atom in CH and the electron donor Y. This interpretation is supported by the negative (repulsive) estimates of the energy contribution due to CH  Y contacts.     

Distribution of Sorbitan Monooleate in poly(l-lactide-co--caprolactone) nanofibers from emulsion electrospinning

The aim of this study was to investigate the distribution of Sorbitan Monooleate (Span80) in poly(l-lactide-co--caprolactone) (PLLACL) nanofibers from emulsion electrospinning. The hypothesis was that PLLACL/Span80 nanofibrous mats would have some Span80 on the surface of the composite nanofibers. To test the hypothesis, the electrospinning of emulsions made of PLLACL, chloroform, Span80, and distilled water to prepare PLLACL/Span80 nanofibers was systematically investigated. The morphology of PLLACL/Span80 nanofibers was investigated by atomic force microscopy. The surface hydrophilicity of the nanofibrous mats were examined by water contact angle test. The distribution of Span80 on the surface of nanofibrous mats was also confirmed by the performance of pig iliac endothelium cells on the nanofibrous mats.     

Ion transfer across liquidliquid interfaces from transition-state theory and stochastic molecular dynamics simulations

We investigate the kinetics and dynamics of ion transfer across liquidliquid interfaces. We calculate the potential of mean force (pmf) of ion transfer from Monte Carlo simulations of a lattice–gas model, assuming independent chemical and electrostatic contributions. The shape of the pmf justifies considering the transfer as activated. The kinetics are obtained from transition-state theory and independently from stochastic molecular dynamics simulations. Both methods yield consistent results, with straight Tafel plots and friction effects in line with Kramers’ theory, but stronger than for a diffusing particle. A higher friction makes barrier recrossing more likely.     

Friedla^ender法合成茚并喹啉类衍生物

胡椒醛(1)经硝化和还原得到中间体6-氨基胡椒醛(3)，再分别与5种茚酮衍生物4a-4e发生Friedla^ender缩合反应，得到5种新的茚并喹啉类衍生物5a-5e．所合成的新化合物的化学结构5a-5e分别经IR，^H NMR，MS，元素分析予以证实。     

Behavior of [`(a)] 20 \bar \alpha _2^0 T of aqueous urea near the singularity point

Relations for the apparent molar heat capacity ϕ_c of urea in an aqueous solution depending on the molality m and temperature were obtained. A transition to the relations ϕ_c(m,T) for D₂O-(ND₂)₂CO and T₂O-(NT₂)₂CO systems was effected by temperature scaling. At low temperatures, the isotherms of the molar heat capacity C _p(m) of the protium and deuterium systems have minima shifted to more dilute solutions at elevated temperatures. At m = 1, C _p of a solution does not depend on temperature in both systems. The dependences C _p(T) also have minima at constant concentrations. The temperature of the minimum heat capacity is most effectively lowered by small additions of urea. For m = 0.25, T _min is 7.5 K lower than T _min of pure water, and its heat capacity is 0.08 J/(mol K) higher. A transition from m = 1.5 to m = 2 lowers the temperature of the minimum heat capacity by 3.6 K; thus, the heat capacity of solutions differs by 0.02 J/(mol K) only.     

Solvent-free synthesis of 4-chalcogenophosphorylpyridines viaSNHAr reaction of pyridines with secondary phosphine chalcogenides

1. Download high-res image (104KB)
2. Download full-size image