Acute Toxicity of Cresols to Pseudomonas — An Initial Oxygen Uptake Method

Acute toxicity of cresols to both Pseudomonas I and II was estimated by an initial oxygen uptake method. Inhibition studies of toluene and cresols on the oxidation of either benzoate by Pseudomnas I or phenol by Pseudomonas II were analyzed and expressed as oxygen uptake rates. Double reciprocal plots for the inhibiton by cresols of oxygen uptake in Pseudomonas, two physical constants, Vmaxi and Ki, were obtained. The Vmaxi of o?, m? and p-cresol were 80%, 81% and 57% of Vmax in Pseudomnas I, and 10%, 25% and 36% in Pseudomonas II, respectively. Thus, the toxicity to Pseudomonas I decreases in the order p- > o- ≥ m-cresol, whereas to Pseudomonas II, the order is changed to o- > m- > p-cresol. This difference in the toxicity order is probably due to the allosteric effect of p-cresol towards Pseudomonas II. Inasmuch as most compounds inhibit noncompetively, the relative toxicity of different compounds can be estimated by a new toxicity parameter RI (relative inhibition) which is defined as 100/Ki. By comparing the RI value of each compound, the toxicity to Pseudomonas I decreases in the order m-chlorophenol > p-cresol > p-chlorophenol > o-cresol ≥ m-cresol > o-chlorophenol > toluene > phenol.     

étude thermodynamique de certains médicaments

Two compounds of sulphamide type:p-amino-benzene sulphonamide (I) and 3,4-dimethylisoxazol 5-sulphanylamide (II) were studied by combustion calorimetry and by differential scanning calorimetry (DSC).The enthalpies in solid state at 298,15 K of combustion, _c H _m ^o (I)=-2788,5±1,6 kJ mol^–1, _c H _m ^o (II)=-5036±3,8 kJ mol^–1 and of formation, _f H _m ^o (I)=-458,3±1,6 kJ mol^–1, _fH _m ^o (II)=-180,1±3,8 kJ mol^–1 were determined.The thermal effects concerning the melting and phase transition of this compounds were also measured.

     

Synthesis of porous vinylnaphthalene/divinylnaphthalene copolymers and their sorptive properties towards phenol and its derivatives

Four porous vinylnaphthalene/divinylnaphthalene (VN/DVN) polymers having three different nominal crosslinking degrees (60, 80 and 100 wt.%) have been synthesized using the suspension polymerization method in the presence of toluene and decane.The use of various crosslinking levels and inert diluents was aimed at changing the extent of polymeric network-diluent interactions. The resultant polymers have specific surface area in the range 450-700 m²/g depending on the DVN content. Two sets of pores were detected in all resins: one with the diameter of ≈2 nm and the second one in the range of 30-40 nm. Their sorptive properties have been studied using dilute (0.5 mmol/l) solutions of phenol and its derivatives (o-chlorophenol, 2-methylphenol, o-nitrophenol, m-nitrophenol and p-nitrophenol). It has been found that sorption, at low equilibrium concentration, follows the order: o-nitrophenol > o-chlorophenol > m-nitrophenol > o-methylphenol > p-nitrophenol > phenol. Full characteristics of the porous structure of resultant polymers was obtained by nitrogen adsorption at 77 K and their surface properties analyzed using Inverse Gas Chromatography.     

Spectroscopic and magnetic properties of Cu(II) complexes with selected biologically important ligands

The aim of this work was to study the spectroscopic and magnetic properties of copper(II) o-, m-, p-aminobenzoates, o-, m-, p-methoxybenzoates and o-, m- and p-nitrobenzoates. The complexes were synthesized and their compositions were evaluated by elementary analysis. The infrared and Raman spectra for Cu(II) aminobenzoates, methoxybenzoates and nitrobenzoates were recorded and assigned. The obtained data were compared with those previously published for aminobenzoic, methoxybenzoic and nitrobenzoic acids and their sodium salts. The structures of Cu(II) o-, m-, p-aminobenzoates, o-, m-, p-methoxybenzoates and o-, m- and p-nitrobenzoates as well as the change in the electronic charges distribution caused by Cu(II) complex formation were discussed.     

Formation and stability of gaseous tolyl ions

Collisional activation mass spectra confirm that tolyl ions can be produced from a variety of CH₃C₆H₄Y compounds. High purity o-, m- and p-tolyl ions are prepared by chemical ionization of the corresponding fluorides (Y=F) as proposed by Harrison. In electron ionization of CH₃C₆H₄Y formation of the more stable tropylium and benzyl ionic isomers usually accompanies that of the o-, m- and p-tolyl ions. Isomerization of low energy [CH₃C₆H₄Y]⁺? to [Y–methylenecyclohexadiene]⁺? is proposed to account for most [benzyl]⁺ formation, while the tropylium ion appears to arise from the isomerization of tolyl ions formed with higher internal energies, [o-, m-, p-tolyl]⁺→ [benzyl]⁺→ [tropylium]⁺, consistent with Dewar's predictions from MINDO/3 calculations.     

Nitrosation kinetics of phenolic components of foods and beverages

The kinetics of the reactions between sodium nitrite and phenol or m-, o-, or p-cresol in potassium hydrogen phthalate buffers of pH 2.5–5.7 were determined by integration of the monitored absorbance of the C-nitroso reaction products. At pH > 3, the dominant reaction was C-nitrosation through a mechanism that appears to consist of a diffusion-controlled attack on the nitrosatable substrate by NO⁺/NO₂H₂⁺ ions followed by a slow proton transfer step; the latter step is supported by the observation of basic catalysis by the buffer which does not form alternative nitrosating agents as nitrosyl compounds. The catalytic coefficients of both anionic forms of the buffer have been determined. The observed order of substrate reactivities (o-cresol ≈ m-cresol > phenol ≫ p-cresol) is explained by the hyperconjugative effect of the methyl group in o- and m-cresol, and by its blocking the para position in p-cresol. Analysis of a plot of ΔH^# against ΔS^# shows that the reaction with p-cresol differs from those with o- and m-cresol as regards the formation and decomposition of the transition state. The genotoxicity of nitrosatable phenols is compared with their reactivity with NO⁺/NO₂H₂⁺. © 1997 John Wiley & Sons, Inc.     

Excess enthalpies of binary mixtures of <Emphasis Type="Italic">ortho</Emphasis>-, <Emphasis Type="Italic">meta</Emphasis>-, <Emphasis Type="Italic">para</Emphasis>-structural isomers containing aliphatic group

To obtain further systematic information for the isomer systems, the excess molar enthalpies for binary (o + m), (o + p), (m + p)-isomers of methoxymethylbenzene, ethylmethylbenzene, diethylbenzene, chloromethylbenzene, tolunitrile and fluorobenzonitrile, tolylacetonitrile were measured at 298.15 K. In this article, the results are discussed and compared with those of previous works. The excess enthalpies of binary systems in different solid and liquid states were measured when the pure component of o-/m-tolunitrile, fluorobenzonitrile was titrated into the prior (o + p) or (m + p) mixtures. A series calculation for the interaction energies (IE) between the isomers was carried out for the pair molecules by ab initio MO of Gaussian 09. Correlations between the excess enthalpies at a molar fraction of x = 0.5 and the intermolecular energy are discussed.     

Thermochemical studies for determination of the molar enthalpy of formation of aniline derivatives

The standard (p ^o=0.1 MPa) molar enthalpies of combustion atT=298.15 K were measured by static bomb combustion calorimetry for liquidN,N-diethylaniline,N,N-dimethyl-m-toluidine,N,N-dimethyl-p-toluidine, andN-ethyl-m-toluidine. Vaporization enthalpies forN,N-dimethyl-m-toluidine andN-ethyl-m-toluidine were determined by correlation gas chromatography. Derived standard molar values of _f H _m ^o (g) at 298.15 K forN,N-diethylaniline (62.1±7.6);N,N-dimethyl-m-toluidine (72.6±7.3),N,N-dimentyl-p-toluidine (68.9±7.4),N-ethyl-m-toluidine (30.5±3.8 kJ· mol^–1) were obtained.     

Solvent effects on the proton magnetic resonance spectra of p-substituted phenyltin chlorides

A PMR study of solvent effects on some p-substituted phenyltin chlorides (substituents = CH₃, (CH₃)₃C, CH₃O) is reported. Co-ordination of solvent molecules to the tin atom leads to an unusual low field shift of the o-ring protons. The results for p-tolytin trichloride have been compared with those for p-tolylsilyl trichloride and discussed. In o-, m- and p-tolyltin trichlorides long range spin-spin couplings between the ring methyl protons and the tin atom have been observed. The order of magnitude is o- > p- > m-methyl protons.     

Chelating Behaviour of Substituted 3-4 Aryl-Hydrazo-Pentane-2, 4-Dione: Part VI. Potentiometric and Infrared Studies of the Ligands and Their Divalent Metal Complexes

The dissociation constants of 3-phenylhydrazo-pentane-2, 4-dione and its o-, m-, p-carboxy derivatives, and the stability constants of complexes of divalent metal ions with the o-carboxy derivative are determined by pH-metric method. The ir-spectra of the ligands and some divalent metal complexes with the o-derivative are discussed.     

Efficient Degradation of Nitrobenzene Induced by Glow Discharge Plasma in Aqueous Solution

The oxidative degradation of nitrobenzene (NB) induced by gaseous glow discharge plasma in contact with aqueous solution was investigated. The experimental results indicated that NB removal obeyed first-order kinetics under certain applied currents. The major degradation byproducts such as nitrophenols, phenol, 1,3-dinitrobenzene and carboxylic acids have been detected. The distribution of nitrophenols follows the order o- > p- > m- and oxalic, formic and acetic acids are major carboxylic intermediates. The eventual products were nitrate ion and carbon dioxide. During the treatment, a large amount of hydrogen peroxide was produced. Addition of ferrous or ferric ions into the solution greatly enhanced the degradation rate due to Fenton’s reaction. The energy efficiencies of NB removal and hydrogen peroxide formation were compared with those of other discharges. Hydroxyl radicals were shown to be the most likely species responsible for NB degradation     

Molecular structure of ethynylbenzene from electron diffraction and ab initio molecular orbital calculations

The molecular structure and benzene ring distortions of ethynylbenzene have been investigated by gas-phase electron diffraction and ab initio MO calculations at the HF/6-31G^* and 6-3G^** levels. Least-squares refinement of a model withC _2v, symmetry, with constraints from the MO calculations, yielded the following important bond distances and angles:r _g(C _i -C _o )=1.407±0.003 Å,r _g(C _o -C _m )=1.397±0.003 Å,r _g(C _m -C _p )=1.400±0.003 Å,r _g(Cr _i -CCH)=1.436 ±0.004 Å,r _g(C=C)=1.205±0.005 Å, C _o -C _i -C _o =119.8±0.4°. The deformation of the benzene ring of ethynylbenzene given by the MO calculations, including o-C_i-C_o=119.4°, is insensitive to the basis set used and agrees with that obtained by low-temperature X-ray crystallography for the phenylethynyl fragment, C₆H₅-CC-, in two different crystal environments. The partial substitution structure of ethynylbenzene from microwave spectroscopy is shown to be inaccurate in the ipso region of the benzene ring.     

N-Glucosides of Aminobenzoic Acids and Aminophenols

N-o-, -m-, and -p-carboxyphenyl-D-glucosylamines and N-o-, -m-, and -p-hydroxyphenyl-D-glucosylamines were synthesized by reaction of D-glucose with o-, m-, and p-aminobenzoic acids and o-, m-, and p-aminophenols. It was demonstrated that both - and -anomers were formed by N-glycosylation of o-, m-, and p-aminobenzoic acids; only -anomers, by N-glycosylation of o-, m-, and p-aminophenols.     

On the CO elimination from [M – CH3]+ ions in substituted phenyl methyl ethers

It was inferred from the collisional activation spectra that CO loss from [M – CH₃]⁺ ions generated from o-,m- and p-cyanoanisole yields a common ion, presumably the cyanocyclopentadienyl cation. A similar product ion is found to be generated in the three dimethoxybenzene isomers. In case of o-dimethoxybenzene loss of CO was also found to occur via an important additional route, which leads to the formation of protonated phenol.     

Mass spectra of some triaryl derivatives of the group V elements,P, As,Sb and Bi

Triphenyl and tri-o-, m- and p-tolyl compounds of the elements P, As, Sb and Bi have been studied as well as tri-(2,6-dimethylphenyl)phosphine. The m- and p-tolyl isomers show very similar behaviour and differ significantly from the o-derivatives. The differences can be largely attributed to steric effects in the o-isomers. Major fragmentation pathways to Group V element (Mt)-containing ions involve Mt? C and C? H, and from the tolyl compounds C? C bond cleavages. Throughout this paper the symbol Mt is used to refer to the Group V element.     

Spectrophotometric determination of some phenols using m-Phenylenediamine and sodium metaperiodate

Summary A new spectrophotometric method for the assay of catechol, guaiacol,o-aminophenol,p-aminophenol and metol using them-phenylenediamine —IO₄-reagent has been developed. The method is simple and accurate within ±1.0%. It has been applied to the estimations of paracetamol through its hydrolysed product and metol in photographic developers.

---

Spektrophotometrische Bestimmung einiger Phenole mit m-Phenylendiamin und Natrium-Metaperjodat

Zusammenfassung Ein neues spcktrophotometrisches Verfahren zur Bestimmung von Brenzcatechin, Guajakol,o-Aminophenol und Metol mit Hilfe vonm-Phenylendiamin und Perjodat wurde ausgearbeitet. Es ist einfach und innerhalb ±1,0% genau und wurde zur Bestimmung von Paracetamol über sein Hydrolyseprodukt und Metol in photographischen Entwicklern verwendet.

     

Thermal decomposition of 4,4′-isopropylidene bis-2,6-dibromophenol (tetrabromobisphenol-A)

The thermal decomposition of tetrabromobisphenol-A (TBBPA) was found to proceed via an autocatalytic free-radical process. The major products of the decomposition are HBr; mono-, di- and tribromobisphenol-A; phenol; mono-, di-, and tribromophenol; and eventually, char. It was generally found that o- and p-halophenols are thermally unstable. In contrast, the m-bromophenol, 3,5-dibromo-2,4,6-trimethylphenol (dibromomesitol) was found to be quite stable. In addition, o- and p-halo-substituted phenols were found to react with LiI at 250°C to produce I₂, while m-halophenols did not. These results are explained by the formation from o- and p-halo-substituted phenols of a reactive halocyclohexadienone.     

Intercalation of Toluidines into α-Zirconium Hydrogenphosphate

Intercalates of o-, m-, and p-toluidine into α-Zr(HPO₄)₂ · H₂O were prepared and characterized by powder X-ray diffraction, thermogravimetric analysis and infrared spectroscopy. As follows from IR, toludine molecules are protonated in the interlayer space. Toluidine molecules are arranged in a bimolecular way in the intercalates containing more than 1.5 toluidine molecules per Zr atom. On the other hand, a monolayer of the toluidine molecules is supposed in the intercalates with less than one toluidine molecule per Zr atom.     

Kinetics and mechanism of chlorination of toluene and some substituted toluenes by chloramine-T

The kinetics of chlorination of toluene, o-methyl toluene, p-methyl toluene, m-methyl toluene, and m-chlorotoluene by chloramine-T(CAT) in aqueous acetic acid in the presence of HClO₄ have been studied. The reaction is first order with respect to [CAT] as well as [H⁺]. The order with respect to the substrate is unity in the case of toluene and m-chlorotoluene, fractional in the case of o-methyl toluene and p-methyl toluene, and zero order in the case of m-methyl toluene. Nuclear halogenation has been observed with m-methyl toluene, while nuclear and side-chain halogenation for p-methyl toluene and o-methyl toluene, and sidechain halogenation for toluene and m-chlorotoluene are the pathways. An increase in the proportion of acetic acid accelerates the rate. Added acetate ions inhibit the reaction, and added p-toluene sulfonamide causes a pronounced retardation. A mechanism involving AcO⁺HCl as the important electrophile is discussed.     

Enthalpy of formation of triphenylphosphine sulfide

The first measurements of the enthalpies of combustion, sublimation, and fusion of an organo-phosphorus sulfide, triphenylphosphine sulfide, are reported: _c H _m ^o (C₁₈H₁₅PS, cr)=–(10752.58 ±2.90), _sub H _m ^o (C₁₈H₁₅PS, 403 K)=(136.80±6.09), and _fus H _m ^o (C₁₈H₁₅PS, T_m=435.92 K) =(30.53±0.21) kJ·mol^–1. Correction of the phase change enthalpies toT=298.15K and p^o =0.1 MPa results in the standard phase change enthalpy values of _sub H _m ^o (298.15 K)=(142.8 ±6.8) and _fus H _m ^o (298.15 K)=(19.28±0.21) kj·mol^–1. Accordingly, the enthalpies of formation of solid, liquid, and gaseous triphenylphosphine sulfide are derived: _f H _m ^o (C₁₈H₁₅PS, cr) =(63.20±2.56), _fH _m ^o (C₁₈H₁₅PS, l)=(82.48±2.57), and _fH _m ^o (C₁₈H₁₅PS, g)=(206.0±7.3) kJ·mol^–1. From these ancillary data, the P=S double-bond enthalpy is 394 kJ-mol^–1 and in good agreement with earlier reaction calorimetry results. These phosphorus sulfide values are compared with those for the arsenic sulfides. Plausibility arguments are given for our results.