Surfactant properties of kraft lignins

Formation of the adsorption layer at the solution-air interface is characterized by data on the surface tension in alkaline solutions of kraft lignins extracted from deresined spruce and birch wood. The effects of the lignin nature and solution concentration on intermolecular interaction in the surface layer are studied.     

Morphology of dry lignins and size and shape of dissolved kraft lignin particles by X-ray scattering

Lignin is a highly branched polymer consisting of phenylpropane units, and it is one of the ingredients of the supporting matrix in plant cell walls. The morphology of several lignins extracted from plant cell walls using different methods was studied by small-angle and ultra-small-angle X-ray scattering. A power-law type intensity was observed for the dry lignins, but on the basis of the power-law exponent the fractal approach often applied to lignins is not fully justified. However, the intensity of kraft lignin did show a power law with surface fractal dimension D(s) = 2.7 +/- 0.1. The specific surface area of the lignins ranged from about 0.5 to 60 m(2)/g with 20% relative accuracy. The radius of gyration was determined from small-angle X-ray scattering data for aqueous solutions of kraft lignin. The shape of the particles in NaCl and NaOH solutions was found to be elongated. The particles were about 1-3 nm thick, while the length (5-9 nm) depended on the solvent and on the lignin concentration. The size of these primary particles was approximately the same as the size of the pores in the fractal aggregates of the dry kraft lignin. Their size was determined to be about 3.5 nm.     

Change in the structural elements of cotton-plant lignins in the various vegetation periods

Summary 1. The dioxane lignins of the cottonplant of various vegetation periods have been studied, and it has been shown that the lignin changes in the course of the development of the plant: the amount of methoxy groups increases and the amount of phenolic hydroxy groups decreases.2. Gel chromatography of the lignins has shown that they are all polydisperse with a predominance of the high-molecular-weight fraction.3. The 3,4-diethoxybenzaldehyde detected in the products of the alkaline nitrobenzene oxidation of dioxane lignin of the early vegetation period after its ethylation with diethyl sulfate is a direct proof of the presence of catechol structural units in cotton-plant lignin.4. A quantitative determination of the catechol structures in the lignins of the cottonplant has shown that their amount decreases as the plant develops.5. By decomposing the lignins with sodium and liquid ammonia, the presence in them of guaiacyl, syringyl, and p-coumaryl structural units has been confirmed and it has been shown that the lignin becomes less condensed as the plant grows, which is apparently connected with an increase in the degree of its methoxylation.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 100–107, January–February, 1977.     

Stabilization of O/W emulsion with hydrophilic/hydrophobic clay particles

In this study, a stabilizing behavior of clay in a 40/60 w/w oil-in-water (O/W) emulsion is investigated by macro- and microscopic morphological observations, rheology, and X-ray diffraction measurements. Hydrophilic and hydrophobic clays (Montmorillonites) are tested for stabilization of emulsion. When hydrophilic clay showing interfacial localization is added to the emulsion, emulsion is not stable to phase separation (creaming). With hydrophobic clay, the emulsion shows phase inversion to water-in-oil (W/O) emulsion due to the increase in oil viscosity which results in phase separation of sedimentation. On the other hand, with the mixture of hydrophilic and hydrophobic clays, the emulsion shows a synergistic macroscopic and microscopic stabilization due to the formation of composite structure at the interface by hydrophilic and hydrophobic clays.     

The oxidation of oleic acid by permanganate in oil in water emulsion

The oxidation of oleic acid and the cleavage of the carbon—carbon double bond was achieved using potassium permanganate added to oil in water emulsion.The best emulsifier to enable the oxidation and cleavage of the double bond was polyoxyethylene lauryl ether (HLD 16.9) which formed the best emulsion with the smaller droplets.The oxidation is controlled by parameters affecting emulsion stability. Increasing the concentrations of emulsifier or oxidizing agent improves the oleic acid conversion and azelaic acid formation. Poor stirring low HLB's, high oil phase content and poor emulsion preparation decrease the yields.     

Application of NMR at various nuclei to determine the composition and structure of complexes in the trifluoroacetic acid-water system

Analysis of the family of concentration relationships for the¹H,²H,¹³C,¹⁷O, and¹⁹F NMR chemical shifts made it possible to establish that 3:1, 2:2, and 1:2 molecular complexes are formed in the trifluoroacetic acid-water system. The NMR chemical shifts of these complexes were determined. The probability distribution of these complexes in relation to the concentration of the components was calculated. The concentration dependence of the degree of dissocation of trifluoroacetic acid was determined in the range of 0–33 mole % of the acid. While not affecting the distribution of the molecular complexes, substitution of the exchange proton by a deuteron affects the ionization process, reducing the amount of ionic particles.L. Ya. Karpov Scientific-Research Physicochemical Institute, Moscow. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, No. 1, pp. 75–83, January–February, 1991. Original article submitted January 30, 1989.     

Stabilization and kinetics in the emulsion copolymerization of butyl acrylate and methyl methacrylate

We carried out emulsion homopolymerizations and copolymerizations of butyl acrylate (BuA) and methyl methacrylate (MMA) with different types and concentrations of surfactants to determine the influence of these parameters on the particle size and particle size distribution and to elucidate the mechanism of particle formation. As expected, the mechanisms of nucleation above and below the critical micelle concentration were very different; however, it was also found that the presence of partially soluble monomers such as MMA in the water phase had a significant influence on the critical micelle concentration of Triton X‐405 (>50%). In addition, the nucleation mechanism during copolymerization seemed to be dominated by BuA, with the number of particles per liter being very similar to the number nucleated during its homopolymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2832–2846, 2001     

Analytical pyrolysis study of biodelignification of cloned Eucalyptus globulus (EG) clone and Pinus pinaster Aiton kraft pulp and residual lignins

This study centred on the analysis of lignin in situ of cloned eucalypt and pine kraft pulps. Trametes versicolor laccase-violuric acid system (LMS) delignifications were performed on a softwood (Pinus pinaster) and a hardwood (Eucalyptus globulus) conventional kraft pulp with an initial kappa number of 34.5 and 15.5, respectively. The LMS treated pulps were then subjected to alkaline extraction stages (E). The kappa number data show that LMS is effective at biodelignifying both softwood and hardwood kraft pulps. However, under the conditions employed in this study, a greater level of biodelignification was obtained with LMS E. globulus (hardwood) than with LMS P. pinaster (softwood), but the amount of lignin removed was higher for the softwood pulp. The original milled wood samples, kraft pulps, biodelignified kraft pulps, and isolated residual lignin and milled wood lignins from the two wood samples have been characterized by pyrolysis-gas chromatography/mass spectrometry. The analysis of the pyrograms indicates that the lignin compositions of the two wood species and corresponding pulps are very different, as expected; however, the knowledge of the chemical mechanisms of delignification is very limited and requires additional work. Analytical pyrolysis is one the few degradative methods for the analysis of biopolymers that has shown a sufficient degree of success.     

Histograms of the size distribution of kraft lignin particles in aqueous solutions at various pH values

The size distribution of kraft lignin particles in aqueous solutions in a wide pH range (9.5−2.0) was studied by filtration through track membranes.     

Physicochemical properties and stability of the emulsion prepared with various emulsifiers for enteral nutrition preparations

The mean diameter of emulsion droplets prepared using three different emulsifiers (egg yolk lecithin alone, egg yolk lysolecithin alone, and a mixture of egg yolk lecithin and lysolecithin) was investigated. Considering the nasal administration of enteral nutrients or that through gastric/jejunal fistulae, the stability of each emulsion with artificial gastric fluid (pH 1.2) or intestinal fluid (pH 6.8) was investigated. When adding artificial intestinal fluid, all emulsions prepared with various emulsifiers (egg yolk lecithin, egg yolk lysolecithin, soybean lecithin, soybean lysolecithin, DK ester^® F-140, and Sunsoft^® A-141E) were stable. On the other hand, when adding artificial gastric fluid, emulsions prepared with egg yolk lysolecithin or Sunsoft^® A-141E were stable, but there was a reduction in the stability of emulsions prepared with the other emulsifiers, with an increase in the particle size. Based on these results, we prepared an emulsion using a natural component-derived emulsifier for enteral nutrients, egg yolk lysolecithin, and clarified the pH change-related stability of the emulsion.     

Kinetic study of the equilibrium in the methanesulfonic acid-water system

A kinetic study of the hydrolysis of ethyl isovalerate in the methanesulfonic acid-water system from pure water to 60.5% CH₃SO₃H at 25°C showed that the hydrolysis rate is directly proportional to the concentration of H₅O₂ ⁺ ions determined by IR spectroscopy. The hydrolysis mechanism is the same as in hydrochloric acid and sulfuric acid solutions. Evidence was found for correctness of the measurements of the equilibrium concentrations of molecules and ions in aqueous methanesulfonic acid solutions by multiple frustrated total internal reflection IR spectroscopy. The possibility was demonstrated for an independent measurement of the equilibrium concentrations of H₅O₂ ⁺ ions by a kinetic method in aqueous acid solutions.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1694–1697, July, 1991.     

Bleaching of kraft pulp with commercial xylanases

The perform ance of commercial xylanases in totally chlorine-free bleaching of kraft pulp from conifer was tested with Pulpzyme HC (Novo Nordisk) and Cartazyme NS-10 (Sandoz/Clariant), at 500 U/kg of dry pulp, respectively. The treatment with Pulpzyme (X_p) or Cartazyme (X_c) has been combined with stages of bleaching using: oxygen (O), sulfuric acid (A), and extraction with hydrogen peroxide (E_op). The following sequences have been tested: OXpAE_op, OXcAE_op, XpOAE_op, XcOAE_op and OAE_op, Kraft pulp bleached at the Klabin industrial plant using the sequence, CEH (chlorine, alkaline extreaction, and hypochlorination) was, used for comparison. The following average values were obtained: 1. Kappa number: OX_pAE_op, 4.8; OX_cAE_op, 4.9; XpOAE_op, 5.0; XcOAE_op, 4.9; OAE_op, 5.6, and CEH, 1.9; 2. Brightness (% ISO values): OX_pAE_op, 68.4; OX_cAE_op, 70.1; X_pOAE_op, 67.9; X_cOAE_op, 26.9; X_pOAE_op, 23.4; X_cOAE_op, 23.1; OAE_op, 25.4, and CEH, 25.2. Pulps that were treated with xylanases, before or affer the delignification with oxygen, have shown reduced kappa number and higher brightness than the pulp OAE_op, Enzyme treatment before delignification with oxygen reduces pulp viscosity. Brightness obtained for pulp produced with bleaching sequences containing the enzymatic treatment, when compared with the control, CEH, shows that the xylanases enhance the action of the bleaching agents.     

Synthesis of 8-heptadecene by decarboxylation of oleic acid in various catalyst systems

Decarboxylation of oleic acid in the presence of various catalysts synthesized in a flow system was performed to produce 8-heptadecene, which is an important product of the petrochemical and other industries. An effect of reaction temperature on the product yield was demonstrated.     

Stabilization of silver clusters by matrices of various chemical nature

Silver clusters having unusual optical and chemical properties and characterized by a band at 320–330 nm, are shown to be stabilized by solid matrices of various chemical nature.

---

, , 320–330 , .

     

Adsorption of oleic acid and triolein onto various minerals and surface treated minerals

A systematic investigation of the adsorption of oleic acid was under-taken with various minerals and surface treated minerals, viz., kaolinite, treated kaolinites, montmorillonites, talcs, gibbsites, calcites and a treated calcite. Adsorption onto kaolinite, two of the treated kaolinites (amine and MgSiO₃ treated), talcs and gibbsites was well correlated by the Langmuir model, while adsorption on the treated calcite was well correlated by the Freundlich model. Adsorption on a cationic polymer-treated kaolinite was explained in terms of a cooperative mechanism. Adsorption onto montmorillonites was explained in terms of a penetrative mechanism involving exchangeable cations.Oleic acid adsorption was compared with triolein adsorption on one of the montmorillonites, two adsorbents produced by the surface treatment of this montmorillonite, and one of the talcs. The triolein adsorption of the montmorillonite was considerably less than its oleic acid adsorption, and was explained in terms of a cooperative mechanism. Triolein adsorption of the treated montmorillonites, and the talc was well correlated by the Langmuir model. Larger amounts of triolein were taken up by the treated montmorillonites than by the untreated montmorillonite. The triolein adsorption of the talc was greater than its oleic acid adsorption.     

Quantitative1H and13C NMR spectroscopy of lignins isolated from aspen wood by various methods

A comparative analysis has been made of the chemical structures of aspen milled wood lignin, aspen dioxane lignin, and lignin from the explosive autohydrolysis of aspen wood.Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 878–886, November–December, 1995. Original article submitted November 22, 1994.     

Thermodynamic properties of citric acid and the system citric acid-water

The binary system citric acid-water has been investigated with static vapour pressure measurements, adiabatic calorimetry, solution calorimetry, solubility measurements and powder X-ray measurements. The data are correlated by thermodynamics and a large part of the phase diagram is given. Molar heat capacities of citric acid are given from 90 to 330 K and for citric acid monohydrate from 120 to 300 K. The enthalpy of compound formation Δ_comH (298.15 K)=(?11.8±1) kJ mole^?1.     

Study of the capillary-porous structure of technical lignins

Differences in the supermolecular structures of various samples of technical lignins have been revealed by studying their water vapor sorption.Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 354–356, May–June, 1998.     

A comparative study of the dioxane lignins ofAlthea

Summary 1. The dioxane lignins have been extracted from three species ofAlthea for the first time. On the basis of elementary and functional analyses, the semiempirical formulas of the phenylpropane structural units have been calculated.2. The molecular weight distributions have shown that the DLAs of these species ofAlthea are polydisperse, and in the case of the DLAs of the wild-growing species —A. rhyticarpa andA. nudiflora — the high-molecular weight fraction is predominant, while for the DLA ofA. rosea the low-molecular-weight fraction is predominant.3. In a study of the products of nitrobenzene oxidation it has been established that the DLA of all three species ofAlthea includes p-coumaryl, guaiacyl, and syringyl structural units.4. In the products of decomposition with metallic sodium in liquid ammonia 18 phenols have been identified the structures of which show the presence in the initial lignins of guaiacyl- and syringylpropane units with free OH groups in the side chains in the - and -positions to the aromatic nucleus.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 93–100, January–February, 1977.