复合材料层合剪切圆柱曲板在侧压作用下的后屈曲

基于Reddy高阶剪切变形理论的Kármám-Donnell型非线性壳体方程,给出复合材料层合剪切圆柱曲板在侧压作用下的后屈曲分析。将壳体屈曲的边界层理论推广到复合材料层合剪切圆柱曲板受侧压作用的情况。相应的奇异摄动法,用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径。分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善,中等厚度正交铺设层合圆柱曲板的后屈曲荷载-挠度曲线。讨论了横向剪切变形,曲板几何参数,铺层数,铺展方式和初始几何缺陷等各种参数变化的影响。     

热-压电效应对轴压混合层合圆柱曲板后屈曲的影响

基于Karman-Donnell型非线性壳体方程，给出带压电作动器混合层合圆柱曲板在机械荷载、电荷载和热荷载作用下的后屈曲分析．假定温度场为均匀分布，电场仅有沿板厚方向的分量Ez，且假定材料性能常数与温度和电场的变化无关。将壳体屈曲的边界层理论推广到混合层合圆柱曲板受复合荷载作用的情况.相应的奇异摄动法用于确定圆柱曲板的屈曲荷载和后屈曲平衡路径.分析中同时考虑非线性前屈曲变形和初始几何缺陷的影响．数值算例给出完善和非完善，含整体覆盖或内埋压电作动器正交铺设层合圆柱曲板的后屈曲平衡路径。讨论了温度变化、控制电压、铺层方式、面内边界条件和初始几何缺陷等各种参数变化的影响。     

An analytical approach for postbuckling of eccentrically or concentrically stiffened composite double curved panel on nonlinear elastic foundation

This paper presents a detailed analytical investigation on the buckling and postbuckling behavior of laminated composite double curved panels with eccentrically and/or concentrically ortho-grid stiffeners subjected to in-plane compression, lateral pressure, thermal environment, and combined loads. The panels are surrounded by three parameter elastic foundations. Different types of simple-supported boundary conditions are considered. The equilibrium and compatibility equations of panel are derived based on Kirchhoff assumptions incorporating nonlinear von-Karman relations. The stress function and Galerkin method are applied to obtain explicit expressions of the buckling load and load-deflection relations. New results are presented to show effects of the combined loads, position of stiffener, and elastic foundation. As a key finding of these results, the buckling load and the postbuckling curves of concentrically stiffened panels are higher than eccentrically stiffened panels.     

Residual capacities of uniaxially compressed,delaminated composite panels

The mechanical buckling and postbuckling behaviour of a delaminated panel under uniaxial compression is investigated using a semi-analytical geometrically nonlinear panel model. A Rayleigh-Ritz procedure based on trigonometric displacement functions is used in conjunction with minimum energy principles to ascertain the mechanical response of the panels. The model includes the effect of delamination propagation resulting from the buckling of the laminates utilizing a discrete cohesive zone model. With the model developed, a detailed assessment of the residual capacity of the panel is provided due to its capability of tracing the equilibrium paths far into the postbuckling range. (© 2010 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Nonlinear buckling and postbuckling of a shear-deformable anisotropic laminated cylindrical panel under axial compression

The nonlinear buckling and postbuckling of a shear-deformable anisotropic laminated cylindrical panel of finite length is investigated based on a boundary-layer theory for buckling. The layers of the panel are assumed to be linearly elastic. The governing equations are based on Reddy’s higher-order shear deformation theory of shells and include the von Karman-type kinematic nonlinearity and extension/twist, extension/flexure, and flexure/twist couplings. The nonlinear prebuckling deformations and the initial geometric imperfections of the panel are both taken into account. The postbuckling behavior of the panel under axial compression is analyzed. A singular perturbation technique is employed to determine its buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of perfect and imperfect moderately thick anisotropic laminated cylindrical panels with different geometric parameters and stacking sequences. The new finding reveals that there arises a compressive stress along with an associate shear stress and twisting when a moderately thick anisotropic laminated cylindrical panel is subjected to axial compression.     

Postbuckling analysis of multi-directional perforated FGM plates using NURBS-based IGA and FCM

Geometric modeling and numerical analysis of multi-directional FGM (Functionally Graded Material) plate, whose material properties grade continuously both in its thickness and in-plane directions, are increasingly required. In this work, postbuckling behavior of this type of plates with multiple cutouts is, for the first time, numerically investigated through the combination of NURBS-based IGA (IsoGeonetric Analysis) and FCM (Finite Cell Method). The nonlinear deformation of plate is determined by TSDT (Third-order Shear Deformation Theory) and von Kármán nonlinear assumptions without the requirement of SCFs (shear correction factors). Besides, the higher continuity advantage of NURBS basis functions can easily meet the C¹-continuous requirement of the displacement field. The main contribution is introducing the FCM to deal with the influence of complex cutouts on the postbuckling characteristics. The geometric interfaces of the cutouts are approached and approximated by adaptive quadrature procedure in the distinguished cut elements. The advantage of this implementation is that the previously tricky process of representing the geometry of perforated plate with multiple NURBS patches can be eliminated, which naturally avoids the imposition of C¹-continuity condition across the patch boundaries. The cylinder arc-length method combined with modified Newton–Raphson iteration algorithm, which takes into account of the initial geometric imperfections, is applied to implement geometrically nonlinear stability analysis and track the postbuckling paths. The effectiveness and reliability of the presented method are verified with available solutions of isotropic and conventional perfect FGM plates. Subsequently, a series of factors, including material volume fraction, length-to-thickness ratio, boundary condition, cutout size, etc., affecting the postbuckling responses of multi-directional perforated FGM plates are considered and investigated.     

Nonlinear response of shear deformable FGM curved panels resting on elastic foundations and subjected to mechanical and thermal loading conditions

This paper presents an analytical investigation on the nonlinear response of thick functionally graded doubly curved shallow panels resting on elastic foundations and subjected to some conditions of mechanical, thermal, and thermomechanical loads. Material properties are assumed to be temperature independent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. The formulations are based on higher order shear deformation shell theory taking into account geometrical nonlinearity, initial geometrical imperfection and Pasternak type elastic foundation. By applying Galerkin method, explicit relations of load-deflection curves for simply supported curved panels are determined. Effects of material and geometrical properties, in-plane boundary restraint, foundation stiffness and imperfection on the buckling and postbuckling loading capacity of the panels are analyzed and discussed. The novelty of this study results from accounting for higher order transverse shear deformation and panel-foundation interaction in analyzing nonlinear stability of thick functionally graded cylindrical and spherical panels.     

Thermal Buckling Analysis of FGM Sandwich Circular Plates Under Transverse Nonuniform Temperature Field Actions北大核心CSCD

Based on the von Kármán geometric nonlinear plate theory, the displacement⁃type geometric nonlinear governing equations for FGM sandwich circular plates under transverse nonlinear temperature field actions were derived. With the immovable clamped boundary condition, the analytical formula for dimensional critical buckling temperature differences of the system was obtained from the solution of the linear eigenvalue problem. Moreover, the 2⁃point boundary value problem of ordinary differential equations was solved with the shooting method. The effects of geometric parameters, constituent material properties, gradient indexes, temperature field parameters and layer⁃thickness ratios on the critical buckling temperature differences, the thermal postbuckling equilibrium paths, and the buckling equilibrium configurations of FGM sandwich circular plates, were investigated. The results show that, with the increases of the thickness⁃radius ratio, the relative thickness of the FGM layer and the gradient index, the FGM sandwich circular plate's critical buckling temperature difference will increase monotonically. Given a fixed radius and a fixed total thickness, the postbuckling deformation of the FGM sandwich circular plate will decrease significantly with the relative thickness of the FGM layer. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Vibration and buckling analyses of FGM plates with multiple internal defects using XIGA-PHT and FCM under thermal and mechanical loads

In this paper, the vibration and buckling analyses of the FGM (functionally graded material) plates with multiple internal cracks and cutouts under thermal and mechanical loads are numerically investigated using the combined XIGA-PHT (extended isogeometric analysis based on PHT-splines) and FCM (finite cell method). Material properties are graded only in the thickness direction. The effective material properties are estimated by using either the rule of mixture or the Mori-Tanaka homogenization technique. The plate displacement field is based on the HSDT (higher-order shear deformation plate theory) without any requirement of the SCF (shear correction factor). The HSDT model can exactly represent the shear stress distribution and improve the accuracy of solutions. The PHT-splines can naturally fulfill the C¹-continuous requirement of the HSDT model. The representation of internal defects is mesh-independent. The discontinuous and singular phenomena induced by the cracks are captured using the enrichment pattern in the XIGA, and the influence of cutouts is implemented by the FCM. The geometries of cutouts are captured by means of adaptive quadrature procedure based on a simple unfitted structural mesh, which avoids the need for multiple patches to describe the complex geometry and eliminates the enforcement of C¹-continuity patch-coupling across the patch boundaries. The initial mesh density around the cracks and cutouts can be controlled flexibly utilizing the local refinement property of the PHT-splines. After validating the results of the developed approach with those available in the literature, the effects of material gradient index, side to thickness ratio, boundary conditions, cutout size and crack length on the normalized frequency and the critical buckling parameter are investigated. Numerical results illustrate the effectiveness and accuracy of the present approach.     

Compressive and thermal postbuckling behaviors of laminated plates with piezoelectric fiber reinforced composite actuators

This paper studied compressive postbuckling under thermal environments and thermal postbuckling due to a uniform temperature rise for a shear deformable laminated plate with piezoelectric fiber reinforced composite (PFRC) actuators based on a higher order shear deformation plate theory that includes thermo-piezoelectric effects. The material properties are assumed to be temperature-dependent and the initial geometric imperfection of the plate is considered. The compressive and thermal postbuckling behaviors of perfect, imperfect, symmetric cross-ply and antisymmetric angle-ply laminated plates with fully covered or embedded PFRC actuators are conducted under different sets of thermal and electric loading conditions. The results reveal that, the applied voltage usually has a small effect on the postbuckling load–deflection relationship of the plate with PFRC actuators in the compressive buckling case, whereas the effect of applied voltage is more pronounced for the plate with PFRC actuators, compared to the results of the same plate with monolithic piezoelectric actuators.     

环肋加劲圆柱壳在静水压力作用下的初始后屈曲分析

本文用Koiter理论分析环肋加劲圆柱壳在静水压力作用下的后屈曲性能.前屈曲状态采用与边界条件一致的非线性有矩方程,本征值问题的解用伽辽金方法求出,得到的临界载荷与经典线性解作了比较.具体计算了三种不同环肋参数的外肋加劲圆柱壳.结果表明,肋的强弱不仅显著影响临界载荷值,同时也改变了柱壳的缺陷敏感度.     

The postbuckling analysis of laminated circular plate with elliptic delamination

Based on the Von Karman plate theory, considering the effect of transverse shear deformation, and using the method of the dissociated three regions, the postbuckling governing equations for the axisymmetric laminated circular plates with elliptical delamination are derived. By using the orthogonal point collocation method, the governing equations, boundary conditions and continuity conditions are transformed into a group of nonlinear algebraically equation and the equations are solved with the alternative method. In the numerical examples, the effects of various elliptical in shape, delamination depth and different material properties on buckling and postbuckling of the laminated circular plates are discussed and the numerical results are compared with available data.     

非完善加筋圆柱壳在外压和热荷载共同作用下的后屈曲

基于壳体屈曲的边界层理论,本文给出有限长加筋圆柱壳在侧向外压和均布热荷载共同作用下的后屈曲分析。分析中同时考虑壳体非线性前屈曲变形,大挠度和初始几何缺陷的影响。肋条的处理采用“平均刚度”法。采用奇异摄动方法导得壳体屈曲载荷关系曲线和后屈曲平衡路径,并给出完善和非完善,纵向加筋或环向加筋圆柱壳数值算例。     

Postbuckling characteristics of angle-ply laminated truncated circular conical shells

The postbuckling characteristics of the angle-ply laminated composite conical shells subjected to the torsion, the external pressure, the axial compression, and the thermal loading considering uniform temperature change are studied using the semi-analytical finite element approach. The finite element formulation is based on the first-order shear deformation theory and the field consistency principle. The variations in the stiffness coefficients along the meridional direction due to the changes in the ply-angle and the ply-thickness of the filament wound conical shells are incorporated in the finite element formulation. The nonlinear governing equations are solved using the Newton–Raphson iteration procedure coupled with the displacement control method to trace the prebuckling followed by the postbuckling equilibrium path. The presence of asymmetric perturbation in the form of a small magnitude load spatially proportional to the linear buckling mode shape is considered to initiate the bifurcation of the shell deformation. The influence of semi-cone angle, ply-angle and number of circumferential waves on the prebuckling/postbuckling response of the anti-symmetric angle-ply laminated circular conical shells is investigated.     

Thermoelastic stability analysis of laminated composite plates: An analytical approach

The paper presents Chebyshev series based analytical solutions for the postbuckling response of the moderately thick laminated composite rectangular plates with and without elastic foundations. The plate is assumed to be subjected to in-plane mechanical, thermal and thermomechanical loadings. In-plane mechanical loading consists of uniaxial, biaxial, shear loadings and their combinations. The temperature induced loading is due to either uniform temperature or a linearly varying temperature across the thickness. The mathematical formulation is based on higher order shear deformation theory (HSDT) and von-Karman nonlinear kinematics. The elastic foundation is modeled as shear deformable with cubic nonlinearity. The thermal and mechanical properties of the composites are assumed to be temperature dependent. The quadratic extrapolation technique is used for linearization and fast converging finite double Chebyshev series is used for spatial discretization of the governing nonlinear equations of equilibrium. The effects of plate parameters and foundation parameters on buckling and postbuckling response of the plate are presented.     

Buckling analysis of circular functionally graded plate under uniform radial compression including shear deformation with linear and quadratic thickness variation on the Pasternak elastic foundation

A numerical scheme for buckling analysis of functionally graded circular plate (FGCP) subjected to uniform radial compression including shear deformation rested on Pasternak elastic foundation is presented. The linear and quadratic thickness variation patterns with various boundary conditions are considered. A modified Euler–Lagrange equation is achieved and then solved by converting differential equation to a nonlinear algebraic system of equations. Also, based on traction–free surface without using shear correction factor, a new approach by considering shear deformation for buckling analysis of FGCP rested on elastic foundation is carried out. The stability equation based on shear stress-free surface is solved by the spectral Ritz method. The spectral Ritz method has good flexibility in the sense of satisfying the boundary conditions. The effects of both linear and quadratic thickness variations and Poisson’s ratio are investigated. By taking small numbers of the basis, the outcomes in literature are improved.     

湿热环境中复合材料层合圆柱薄壳屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响。基于细观力学模型复合材料性能与湿度和温度变化有关。壳体控制方程基于经典层合壳理论,并包括湿热效应。壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径。分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为。讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响。     

Levy-type solution for buckling analysis of thick functionally graded rectangular plates based on the higher-order shear deformation plate theory

In this article, an analytical approach for buckling analysis of thick functionally graded rectangular plates is presented. The equilibrium and stability equations are derived according to the higher-order shear deformation plate theory. Introducing an analytical method, the coupled governing stability equations of functionally graded plate are converted into two uncoupled partial differential equations in terms of transverse displacement and a new function, called boundary layer function. Using Levy-type solution these equations are solved for the functionally graded rectangular plate with two opposite edges simply supported under different types of loading conditions. The excellent accuracy of the present analytical solution is confirmed by making some comparisons of the present results with those available in the literature. Furthermore, the effects of power of functionally graded material, plate thickness, aspect ratio, loading types and boundary conditions on the critical buckling load of the functionally graded rectangular plate are studied and discussed in details. The critical buckling loads of thick functionally graded rectangular plates with various boundary conditions are reported for the first time and can be used as benchmark.     

湿热环境中复合材料层合圆柱薄壳的屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响.基于细观力学模型复合材料性能与湿度和温度变化有关.壳体控制方程基于经典层合壳理论,并包括湿热效应.壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径.分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响.数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为.讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响.     

中厚板的弹性屈曲和后屈曲

本文采用Reissner假定考虑横向剪切变形的影响,导出弹性矩形板大挠度方程.本文讨论考虑横向剪切变形的矩形板的弹性屈曲和后屈曲.采用文[8]提供的摄动方法,给出了完善和非完善中厚板的后屈曲平衡路径,并与经典薄板理论结果进行了比较.