Oxidation of thallium(I) by hexacyanoferrate(III) in aqueous acetic acid

The hexacyanoferrate(III)-thallium(I) reaction in aqueous acetic acid containing large concentrations of hydrochloric acid is considerably accelerated both by hydrogen and chloride ions as well as increasing acetic acid in the medium. The experimental results obey the rate law (1) where β₁ to β₆ are the cumulative stability constants of the species TlCl, TlCl, TlCl, HFe(CN), H₂Fe(CN) and H₃Fe(CN)₆ respectively and k_a and k_b are the rate constants associated with the mono- and di-protonated oxidant species. The main active species are H₂Fe(CN) and TlCl.     

Incorporating glycidyl methacrylate into block copolymers using poly(methacrylate‐ran‐styrene) macroinitiators synthesized by nitroxide‐mediated polymerization

Methyl methacrylate/styrene (MMA/S), ethyl methacrylate/styrene (EMA/S) and butyl methacrylate/styrene (BMA/S) feeds (>90 mol % methacrylate) were copolymerized in 50 wt % p‐xylene at 90 °C with 10 mol % of additional SG1‐free nitroxide mediator relative to unimolecular initiator (BlocBuilder^®) to yield methacrylate rich copolymers with polydispersities _w/ _n = 1.23–1.46. k_pK values (k_p = propagation rate constant, K = equilibrium constant) for MMA/S copolymerizations were comparable with previous literature, whereas EMA/S and BMA/S copolymerizations were characterized by slightly higher k_pK's. Chain extensions with styrene at 110 °C initiated by the methacrylate‐rich macroinitiators (number average molecular weight _n = 12.9–33.5 kg mol^?1) resulted in slightly broader molecular weight distributions with _w/ _n = 1.24–1.86 and were often bimodal. Chain extensions with glycidyl methacrylate/styrene/methacrylate (GMA/S/XMA where XMA = MMA, EMA or BMA) mixtures at 90 °C using the same macroinitiators resulted frequently in bimodal molecular weight distributions with many inactive macroinitiators and higher _w/ _n = 2.01–2.48. P(XMA/S) macroinitiators ( _n = 4.9–8.9 kg mol^?1), polymerized to low conversion and purified to remove “dead” chains, initiated chain extensions with GMA/MMA/S and GMA/EMA/S giving products with _w/ _n ～ 1.5 and much fewer unreacted macroinitiators (<5%), whereas the GMA/BMA/S chain extension was characterized by slightly more unreacted macroinitiators (～20%). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2574–2588, 2009     

Fe(CN)$\rm{ {_{6}^{4-}}}$‐Doped‐Glutaraldehyde‐Cross‐Linked Poly‐L‐Lysine Film Electrode. Part 1: Electrochemical Characterization and Its Electrocatalytic Activity Towards Oxidation of Ascorbic Acid

The present work describes preparation, characterization, and electrocatalytic behavior of a hexacyanoferrate‐doped‐glutaraldehyde‐cross‐linked poly‐L ‐lysine (PLL‐GA‐Fe(CN) film modified glassy carbon electrode. The modified electrode has been successfully prepared by electrostatically binding negatively charged Fe(CN) mediator into cross‐linked poly‐L ‐lysine cationic film. The dependence of the peak current of the modified electrode in pure supporting electrolyte (pH 6.8 phosphate buffer solution; PBS) shows that the charge transport in the film is fast and relatively unimpeded at lower scan rates. Cyclic voltammetry and rotating disk electrode (RDE) techniques are used to investigate the electrocatalytic activity of modified electrode towards oxidation of ascorbic acid. The rate constant (k), of catalytic reaction between electrogenerated Fe(CN) ions and ascorbic acid, obtained from RDE analysis was found to be 5.53×10⁵ cm³ mol^?1 s^?1. Finally, the PLL‐GA‐Fe(CN) film electrodes are successfully used for the individual estimation of ascorbic acid in the concentration range of physiological interest.     

Lamellar Copper(I) Thiocyanate‐Based Coordination Polymers containing the Alkali Cation ligating Thiacrown Ether 1,10‐Dithia‐18‐crown‐6

The lamellar coordination polymer [(CuSCN)₂(μ‐1,10DT18C6)] (1,10DT18C6 = 1,10‐dithia‐18‐crown‐6), in which staircase‐like CuSCN double chains are bridged by thiacrown ether ligands, may be prepared in two triclinic modifications 1 a and 1 b by reaction of CuSCN with 1,10DT18C6 in respectively benzonitrile or water. Performing the reaction in acetonitrile in the presence of an equimolar quantity of KSCN leads, in contrast, to formation of the K⁺ ligating 2‐dimensional thiocyanatocuprate(I) net [{Cu₂(SCN)₃}^–] of 2 , half of whose Cu(I) atoms are connected by 1,10DT18C6 macrocycles. The potassium cations in [{K(CH₃CN)}{Cu₂(SCN)₃(μ‐1,10DT18C6)}] ( 2 ) are coordinated by all six potential donor atoms of a single thiacrown ether in addition to a thiocyanate S and an acetonitrile N atom. Under similar conditions, reaction of CuI, NaSCN and 1,10DT18C6 affords [{Na(CH₃CN)₂}{Cu₄I₄(SCN)(μ‐1,10DT18C6)}] ( 3 ), which contains distorted Cu₄I₄ cubes as characteristic molecular building units. These are bridged by thiocyanate and thiacrown ether ligands into corrugated Na⁺ ligating sheets. In the presence of divalent Ba²⁺ cations, charge compensation requirements lead to formation of discrete [Cu(SCN)₃(1,10DT18C6‐κS)]^2– anions in [Ba{Cu(SCN)₃(1,10DT18C6‐κS)}] ( 4 ).     

Lewis acid‐base properties of cellulose acetate butyrate by inverse gas chromatography

The dispersive component of the surface‐free energy, , of cellulose acetate butyrate (CAB) has been determined using the net retention volume, V_N, of n‐alkanes (C₅? C₈) probes in the temperature range 323.15–393.15 K. The values decrease nonlinearly with increase in temperature, and the temperature coefficients of are ? 0.32 (mJ/m²K) and ? 0.10 (mJ/m²K) in the range 323.15–353.15 K and 353.15–393.15 K, respectively. This variation in has been attributed to the structural changes that take place on the surface of CAB at ～353.15 K. The specific components of the enthalpy of adsorption, , and entropy of adsorption, , calculated using V_N of polar solutes are negative. The values are used to evaluate Lewis acidity constant, K_a, and Lewis basicity constant, K_b, for the CAB surface. The K_a and K_b values are found to be 0.126 and 1.109, respectively, which suggest that the surface is predominantly basic. The K_a and K_b results indicate for the necessary surface modifications of CAB which act as biodegradable adsorbent material. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of Electrochemical Electron‐Transfer Reaction Standard Rate Constants at Nanoelectrodes: Standard Rate Constants for Ferrocenylmethyltrimethylammonium(III)/(II) and Hexacyanoferrate(III)/(II)

The most common approximation of electroneutrality is inappropriate for analyzing the voltammetric response of nanoelectrodes. Therefore, the microelectrode theory for extracting the standard rate constant k⁰ for electron transfer from steady‐state voltammograms is invalid for nanoelectrodes. Unlike previous approaches, we considered the influence of the interfacial potential distribution caused by the absence of electroneutrality. We estimated the magnitude of the error at low overpotential incurred as a result of ignoring the absence of electroneutrality and found that it was small. In this region, electrochemical reaction appears to be limited by the rate of electron transfer. Under these conditions, k⁰ can be obtained from steady‐state voltammogram data in a low overpotential region according to an approximate form of the Butler–Volmer equation. This procedure can greatly simplify analysis and calculation of the rate constant k⁰ at nanoelectrodes. Steady‐state voltammogram of equal‐concentration hexacyanoferrate(III)/(II) (Fe(CN) /Fe(CN) ) and ferrocenylmethyltrimethylammonium(III)/(II) (FcTMA²⁺/FcTMA⁺) redox couples were investigated at Pt? Ir nanoelectrodes in the presence of a support electrolyte. k⁰ for Fe(CN) /Fe(CN) and FcTMA²⁺/FcTMA⁺ at Pt? Ir nanoelectrodes were evaluated.     

Combining Modular Ligation and Supramolecular Self‐Assembly for the Construction of Star‐Shaped Macromolecules

A well‐defined random copolymer of styrene (S) and chloromethylstyrene (CMS) featuring lateral chlorine moieties with an alkyne terminal group is prepared (P(S‐co‐CMS), = 5500 Da, PDI = 1.13). The chloromethyl groups are converted into Hamilton wedge (HW) entities (P(S‐co‐HWS), = 6200 Da, PDI = 1.13). The P(S‐co‐HWS) polymer is subsequently ligated with tetrakis(4‐azidophenyl)methane to give HW‐functional star‐shaped macromolecules (P(S‐co‐HWS))₄, = 25 100 Da, PDI = 1.08). Supramolecular star‐shaped copolymers are then prepared via self‐assembly between the HW‐functionalized four‐arm star‐shaped macromolecules ( P(S‐co‐HW )) ₄ and cyanuric acid (CA) end‐functionalized PS (PS–CA, = 3700 Da, PDI = 1.04), CA end‐functionalized poly(methyl methacrylate) (PMMA–CA, = 8500 Da, PDI = 1.13) and CA end‐functionalized polyethylene glycol (PEG–CA, = 1700 Da, PDI = 1.05). The self‐assembly is monitored by ¹H NMR spectroscopy and light scattering analyses.     

Electron Transfer Processes at Aryl‐Modified Glassy Carbon Electrode

The effect of a layer of electrochemically grafted 4‐diazo‐N,N‐diethylaniline (DEA) groups on the electron transfer kinetics of redox systems, displaying fast and slow heterogeneous electron transfer rate constants at edge and basal planes of carbon, was investigated. The properties of the modified electrode were characterized by cyclic voltammetry using four different inorganic redox systems (Fe(CN) , Co(phen) , Ru(NH₃) , and IrCl in acidic, neutral, and basic media. Two distinct blocking behaviors and electrostatic effects were observed. More precisely, a strong blocking effect of the grafted layer on Fe(CN) and Co(phen) was found, whereas Ru(NH₃) and IrCl showed to be rather unaffected by the presence of the DEA grafted layer.     

Direct Cyclodextrin‐Mediated Ring Opening Polymerization of ϵ‐Caprolactone in the Presence of Yttrium Trisphenolate Catalyst

Unmodified β‐cyclodextrin has been directly used to initiate ring‐opening polymerization of ϵ‐caprolactone in the presence of yttrium trisphenolate. Well‐defined cyclodextrin (CD)‐centered star‐shaped poly(ϵ‐caprolactone)s have been successfully synthesized containing definite average numbers of arms (N_arm = 4–6) and narrow polydispersity indexes (below 1.10). The number‐average molecular weight ( ) and average molecular weight per arm ( ) are controlled by the feeding molar ratio of monomer to initiator. The prepared star‐PCL with of 2.7 × 10³ is in fully amorphous and that with of 13.3 × 10³ is crystallized. In addition, the obtained poly(e‐caprolactone) (PCL) stars with various molecular weights have different solubilities in methanol and tetrahydrofuran, which can be applied for further modifications.     

Palladium(II) and platinum(II) complexes of (1R,2R)‐(−)‐1,2‐diaminocyclohexane (DACH) with various carboxylato ligands and their cytotoxicity evaluation

Several palladium(II) and platinum(II) complexes analogous to oxaliplatin, bearing the enantiomerically pure (1R,2R)‐(?)‐1,2‐diaminocyclohexane (DACH) ligand, of the general formula {MX₂[(1R,2R)‐DACH]}, where M = Pd or Pt, X (COO)₂, CH₂(COO)₂, , , {1,1′‐C₅H₈(CH₂COO)₂}, [1,1′‐C₆H₁₀(CH₂COO)₂], [1,1′‐(COO)₂ferrocene], , , , MeCOO and Me₃CCOO, were synthesized. All the complexes prepared were characterized physicochemically and spectroscopically. Some selected complexes were screened in vitro against several tumor cell lines and the results were compared with reference standard drug, oxaliplatin. Copyright © 2009 John Wiley & Sons, Ltd.     

Selective Detection of Ascorbic Acid Using Octacyanomolybdate‐Doped‐Glutaraldehyde‐Cross‐Linked Poly‐L‐Lysine Film Modified Glassy Carbon Electrode

The present work describes oxidation of ascorbic acid (AA) at octacyanomolybdate‐doped‐glutaraldehyde‐cross‐linked poly‐L ‐lysine (PLL‐GA‐Mo(CN) film modified glassy carbon electrode in 0.1 M H₂SO₄. The modified electrode has been successfully prepared by means of electrostatically trapping Mo(CN) mediator in the cationic film of glutaraldehyde‐cross‐linked poly‐L ‐lysine. The dependence of peak current of modified electrode in pure supporting indicates that the charge transfer in the film was a mixed process at low scan rates (5 to 200 mV s^?1), and kinetically restrained at higher scan rates (200 to 1000 mV s^?1). Cyclic voltammetry and rotating disk electrode (RDE) techniques are used to investigate the electrocatalytic oxidation of ascorbic acid and compared with its oxidation at bare and undoped PLL‐GA film coated electrodes. The rate constant of catalytic reaction k obtained from RDE analysis was found to be 9.5×10⁵ cm³ mol^?1 s^?1. The analytical determination of ascorbic acid has been carried out using RDE technique over the physiological interest of ascorbic acid concentrations with a sensitivity of 75 μA mM^?1. Amperometric estimation of AA in stirred solution shows a sensitivity of 15 μA mM^?1 over the linear concentration range between 50 and 1200 μM. Interestingly, PLL‐GA‐Mo(CN) modified electrode facilitated the oxidation of ascorbic acid but not responded to other electroactive biomolecules such as dopamine, uric acid, NADH, glucose. This unique feature of PLL‐GA‐Mo(CN) modified electrode allowed for the development of a highly selective method for the determination of ascorbic acid in the presence of interferents.     

Radical Ions of a Bishomobinaphthylene Containing two 1,6-methano[10]annulene moieties: An ESR and ENDOR study

The radical cation and the radical anion of ‘syn’-cyclobuta[1,2-c:3,4-c′]di-1,6-methano[10]annulene (‘syn’-4a,12a:6a, 10a-bishomobinaphthylene; 3 ) have been characterized by their hyperfine data. The highly resolved ESR spectrum of $ 3^{+ \atop \dot{}} $ is dominated by a triplet splitting from the outer pair of methano β-protons (H_o). In contrast, the ESR spectrum of $ 3^{- \atop \dot{}} $ is poorly resolved with the largest coupling constants arising from perimeter α-protons. The different hyperfine features of $ 3^{+ \atop \dot{}} $ and $ 3^{- \atop \dot{}} $ are rationalized by MO models. The SOMO of $ 3^{+ \atop \dot{}} $ ψ_SA(b₁), has substantial LCAO coefficients of the same sign at the bridged atoms C(1), C(6), C(11), and C(16), whereas in the SOMO of $ 3^{- \atop \dot{}} $, ψ_SS(a₁), the four atoms lie in the vertical nodal planes. The large width and the reluctance to saturation of the lines in the ESR spectrum of $ 3^{- \atop \dot{}} $ are attributed to the near-degeneracy of the lowest antibonding MO's. Due to their similar nodal properties, the SOMO's of $ 3^{- \atop \dot{}} $ and the radical anions of binaphthylene ( 4 ), 1,6-methano[10]annulene ( 1 ), and naphthalene ( 2 ) are interrelated. Moreover, because the cyclic π-systems in 3 and 1 deviate in the same way from planarity, the effect of such distortions on the coupling constants, a_Hμ, of the perimeter α-protons in $ 3^{- \atop \dot{}} $ and $ 1^{- \atop \dot{}} $ should be comparable. Indeed, on going from $ 4^{- \atop \dot{}} $ to $ 3^{- \atop \dot{}} $, the |a_Hμ| values are reduced exactaly by half as much as the corresponding values on passing from $ 2^{- \atop \dot{}} $ to $ 3^{- \atop \dot{}} $, of which the cyclic π-systems are twice contained in $ 4^{- \atop \dot{}} $ and $ 3^{- \atop \dot{}} $ respectively.     

Controlled Synthesis of a Chitosan‐Based Graft Copolymer Having Polysarcosine Side Chains Using the NCA Method with a Carboxylic Acid Additive

Summary: A novel chitosan derivative with polysarcosine side chains, i.e., chitosan‐graft‐polysarcosine [chitosan‐graft‐poly(N‐methylglycine)], was synthesized by ring‐opening polymerization of sarcosine N‐carboxyanhydride (NCA) with chitosan as a macroinitiator in the presence of carboxylic acids in dimethyl sulfoxide at 27 °C. Degree of substitution ( ) for polysarcosine side chains introduced to chitosan was controlled successfully by the feed amount of the additive nicotinic acid ( = 0.21–0.71). Independent of control, degree of polymerization ( ) for polysarcosine side chains was controlled by adjusting feed ratios of NCA monomer to chitosan ( = 14–43). Kinetic analysis of the propagation of sarcosine NCA was conducted by measuring CO₂ evolution. Apparent k_p values decreased with increased feed amounts of nicotinic acid, supporting the theory that propagation of NCA in the presence of nicotinic acid proceeds via equilibrium between active amine and dormant ammonium species.

Propagation mechanism of carboxylic acid‐mediated polymerization of sarcosine N‐carboxyanhydride.     

Rearrangements of Radical Cations of [2.2]Paracyclophanes and of a bridged [14]annulene to those of pyrenes: An ESR and ENDOR study

ESR and ENDOR studies have been carried out on the radical cations obtained consecutively by reaction of trans-10b, 10c-dimethyl-10b, 10c-dihydropyrene ( 4 ) with AlCl₃ in CH₂C1₂. The primarily formed ${\bf 4}^{+ \atop \dot{}}$ rearranges at 253 K to the radical cation(s) of 1,6- ( 5a ) and/or 1,8-dimethylpyrene ( 5b ). At 323 K, the spectra of ${\bf 5a}^{+ \atop \dot{}}$/${\bf 5b}^{+ \atop \dot{}}$ are replaced by that of the highly persistent radical cation of 1,3,6,8-tetramethylpyrene ( 6 ). Surprisingly, ${\bf 6}^{+ \atop \dot{}}$ is also the only observable paramagnetic product resulting from a treatment of 4,5,7,8- ( 1 ), 4,7,13,16- ( 2 ), and 4,5,12,13-tetramethyl[2.2]paracyclophane ( 3 ) with AlCl₃ in CH₂Cl₂ at 353 K. The structures of the intermediates in the rearrangement [${\bf 1}^{+ \atop \dot{}}$, ${\bf 2}^{+ \atop \dot{}}$, ${\bf 3}^{+ \atop \dot{}}$] → ${\bf 6}^{+ \atop \dot{}}$ are discussed.     

Ab initio molecular orbital study on the structures and energetics of CH3OH\documentclass{article}\pagestyle{empty}\begin{document}$_{2}^{+}$\end{document}(H2O)n and CH3SH\documentclass{article}\pagestyle{empty}\begin{document}$_{2}^{+}$\end{document}(H2O)n in the gas phase

The purpose of this study was to calculate the structures and energetics of CH₃OH$_{2}^{+}$(H₂O)_n and CH₃SH$_{2}^{+}$(H₂O)_n in the gas phase: we asked how the CH₃OH$_{2}^{+}$ and CH₃SH$_{2}^{+}$ moieties of CH₃OH$_{2}^{+}$(H₂O)_n and CH₃SH$_{2}^{+}$(H₂O)_n change with an increase in n and how can we reproduce the experimental values ΔH°_n−1,n. For this purpose, we carried out full geometry optimizations with MP2/6‐31+G(d,p) for CH₃OH$_{2}^{+}$(H₂O)_n (n=0,1,2,3,4,5) and CH₃SH$_{2}^{+}$(H₂O)_n (n=0,1,2,3,4). We also performed a vibrational analysis for all clusters in the optimized structures to confirm that all vibrational frequencies are real. All of the vibrational frequencies of these clusters are real, and they correspond to equilibrium structures. For CH₃OH$_{2}^{+}$(H₂O)_n, when n increases, (1) the C O bond length decreases, (2) the C H bond lengths do not change, (3) the O H bond lengths increase, (4) the OCH bond angles increase, (5) the COH bond angles decrease, (6) the charge on CH₃ becomes less positive, and (7) these predicted values, except for the O H bond lengths of CH₃OH$_{2}^{+}$(H₂O)_n, approach the corresponding values in CH₃OH. The C O bond length in CH₃OH$_{2}^{+}$(H₂O)₅ is shorter than that in CH₃OH$_{2}^{+}$ in the gas phase by 0.061 Å at the MP2/6‐31+G(d,p) level. Except for the S H bond lengths in CH₃SH$_{2}^{+}$(H₂O)_n, however, the structure of the CH₃SH$_{2}^{+}$ moiety does not change with an increase in n. © 2000 John Wiley & Sons, Inc. J Comput Chem 22: 125–131, 2001     

Cluster ions in the secondary ion mass spectrometry of choline and acetylcholine halides

Liquid secondary ion mass spectra of choline and acetylcholine halides exhibit several series of cluster ions whose origins were investigated using B/E and B²/E linked-scan techniques. In the case of choline halides three series of cluster ions were identified as (Me₃$ \mathop {\rm N}\limits^ + $CH₂CH₂OH + nM), (Me₃$ \mathop {\rm N}\limits^ + $CH₂CH₂OMe + nM) and (Me₃N$ \mathop {\rm N}\limits^ + $CH₂CH₂OH · Me₃$ \mathop {\rm N}\limits^ + $CH₂CH₂O^? + nM), while (CH₃COOCH₂CH₂$ \mathop {\rm N}\limits^ + $Me₃ + nM), (Me₃$ \mathop {\rm N}\limits^ + $CH₂CH₂OH + nM) and (CH₂ = CH$ \mathop {\rm N}\limits^ + $Me₃ + nM) were observed in the spectra of acetylcholine halides. For these cluster ions, bimolecular reactions induced on ion bombardment under secondary ion mass spectrometric conditions are discussed.     

Amphiphilic Poly(4‐acryloylmorpholine)/Poly[2‐(N‐carbazolyl)ethyl acrylate] Random and Block Copolymers Synthesized by NMP

A series of random copolymers and block copolymers containing water‐soluble 4AM and fluorescent VAK are synthesized by NMP. The homopolymerizations of 4AM and VAK and 4AM/VAK random copolymerization are performed in 50 wt% DMF using 10 mol% SG1, resulting in a linear increase in versus conversion, and final polymers with narrow molecular weight distributions ( < 1.4). Reactivity ratios r_VAK = 0.64 ± 0.52 and r_4AM = 0.86 ± 0.66 are obtained for the 4AM/VAK random copolymerization. In addition, a poly(4AM) macroinitiator is used to initiate a surfactant‐free suspension polymerization of VAK. After 2.5 h, the resulting amphiphilic block copolymer has = 12.6 kg · mol^?1, = 1.48, molar composition F_VAK = 0.38 with latex particle sizes between 270 and 475 nm.

     

The first normal stress difference and viscosity in shear of liquid crystalline solutions of hydroxypropylcellulose: new experimental data and theory

The constitutive equations for liquid crystalline polymers recently proposed by one of us [1] are applied here to interpret the behaviour of the shear viscosity η and the first normal stress difference N₁() measured for liquid crystalline (LC) solutions of hydroxypropylcellulose in acetic acid. N₁( ) is observed to change from positive to negative and again to positive, as the shear rate increases, at lower concentrations, in the LC phase. The -values at which N₁ changes sign depend on the molecular mass (degree of polymerization) and on the concentration. η shows a small Newtonian plateau at low shear rates and a strong shear-thinning at higher values of . The rate of decrease of η in this region shows an “hesitation” similar to one previously observed in LC solutions of poly-γ-benzyl-L-glutamate PBLG. All these observations can be rationalized within the frame-work of Martins' theory. The expressions for N₁() and η derived from this theory fit very well (quantitatively) to the experimental data and some fundamental viscoelastic parameters of the system under study are thereby obtained for the first time.     

A Fully Substituted 3‐Silolene Functions as Promising Building Block for Hyperbranched Poly(Silylenevinylene)

A 3‐silolene derivative, 2,2,5,5‐tetrakis(dimethylsilyl)‐1,1‐dimethyl‐3,4‐diphenyl‐3‐silolene (TDMSHS), is first synthesized and characterized by X‐ray diffraction crystallography and spectroscopic methods. Hydrosilylation polymerization of TDMSHS with 1,1‐dimethyl‐2,5‐bis(4‐ethynylphenyl)‐3,4‐diphenylsilole in the presence of Karstedt's catalyst generates a stereoregular silole‐containing hyperbranched poly(silylenevinylene) (hb‐SPSV) with a high molecular weight ( = 146 000, / = 1.5) in high yield (≈95%). hb‐SPSV exhibits excellent thermal stability and strong fluorescence, and the emission of its aggregates in aqueous mixture can be quenched efficiently by picric acid with large quenching constants K_SV up to 414400 M ⁻¹.     

Subgroup‐chain symmetry‐adapted irreducible matrices and CG coefficients of point groups

The irreducible matrices and Clebsch–Gordan coefficients of any crystallographic point group adapted to all possible canonical subgroup chains are calculated ab initio for both single‐valued and double‐valued representations and tabulated with exact values in the form of or and with components labeled by the irrep labels of the group chain in Koster notation. The phases and ordering of the components of irreducible bases for the cubic point groups are properly chosen so that irreducible matrices for all subgroup chains of G=T_d, O, O_h obey the associated relations D(G)=D(G)D(G), i=4, 6, and the complex conjugation relation for the group T, D(T)=D(T)*. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 75: 67–80, 1999