The Sensitized Solid‐Phase Electrochemiluminescence of Electrodeposited Poly‐Luminol/Aniline on AuAg/TiO2 Nanohybrid Functionalized Electrode for Flow Injection Analysis

In this study, a copolymer of luminol with aniline is electrochemically deposited onto the AuAg/TiO₂ nanohybrid functionalized indium tin oxide coated glass. It is used as a reagentless electrochemiluminescent (ECL) electrode for flow‐injection‐analysis (FIA). The properties of this solid phase ECL electrode are characterized by cyclic voltammetry, electrochemical impedance spectroscopy and scanning electron microscopy etc. It has stronger ECL emission, sensitive response for target analytes and excellent stability. The so‐prepared ECL electrode shows sensitive response to reactive oxygen species thereafter to be applied for determination of hydrogen peroxide with FIA mode. Under optimized conditions, a mass detection limit of 0.822 pg of hydrogen peroxide was obtained. Thus the hydrogen peroxide residues in samples were detected with satisfactory result.     

The antioxidant methyl 3‐(3,5‐di‐tert‐butyl‐4‐hydroxyphenyl)propionate

The title compound, C₁₈H₂₈O₃, was prepared by the reaction of 2,6‐di‐tert‐butylphenol with methyl acrylate under basic conditions using dimethyl sulfoxide as the promoter. The structure of this antioxidant indicates significant strain between the ortho tert‐butyl substituents and the phenolic OH group. In spite of the steric crowding of the OH group, it participates in intermolecular hydrogen bonding with the ester carbonyl O atom.     

trans‐3‐Ethyl‐cis‐2,6,6‐trimethyl‐4‐oxocyclohexanecarboxylic acid: an intermediate in the synthesis of a highly potent estrogen

The title compound, C₁₂H₂₀O₃, (IV), the ethyl ester of which is an intermediate in the synthesis of a compound reported to be highly estrogenic, has been prepared. After the initial steps reported for the synthesis of this ester intermediate were followed, it was converted into the crystalline acid, (IV), for X‐ray analysis. It was verified that (IV) was racemic when prepared. X‐ray analysis showed that anti‐hydrogenation of the double bond had occurred in the synthesis, making the orientation of the carboxyl group cis to the 2‐methyl group and trans to the 3‐ethyl group. NMR spectroscopy showed that the stereochemistry of (IV) was identical with that of its ester precursor. While the earlier report did not note the stereochemistry of this ester, it pointed out that the estrogenic product derived from it possessed the opposite carboxyl‐2‐methyl orientation, i.e.trans, although no X‐ray analysis was performed. In the light of these results and the importance of correlating biological activity with compound structure, the unequivocal characterization of the highly estrogenic compound is warranted.     

Monitoring structural transformations in crystals. 13. On photocyclization in 2,3,4,5,6‐pentamethylbenzophenone, 1,3‐diphenylbutan‐1‐one and 2,4,6‐triisopropyl‐4′‐methoxybenzophenone

The geometrical parameters governing the potential for the photocyclization reaction occurring in crystals of 2,3,4,5,6‐pentamethylbenzophenone, C₁₈H₂₀O, (I), 1,3‐diphenylbutan‐1‐one, C₁₆H₁₆O, (II), and 2,4,6‐triisopropyl‐4′‐methoxybenzophenone, C₂₃H₃₀O₂, (IV), have been evaluated. Compound (IV) undergoes photocyclization but (I) and (II) do not, despite the fact that their geometrical parameters appear equally favourable for reaction. The structure of the partially reacted crystal of the photoactive compound, i.e. 2,4,6‐triisopropyl‐4′‐methoxybenzophenone–3,5‐diisopropyl‐7‐(4‐methoxyphenyl)‐8,8‐dimethylbicyclo[4.2.0]octa‐1,3,5‐trien‐7‐ol (9/1), 0.90C₂₃H₃₀O₂·0.10C₂₃H₃₀O₂, (III), was also determined, providing structural evidence for the reactivity of the compound. It has been found that the carbonyl group of the photoactive compound reacts with one of the two o‐isopropyl groups. The study has shown that the intramolecular geometrical parameters are not the only factors influencing the reactivity of compounds in crystals.     

4,4′‐Butane‐1,4‐diylbis[3‐ethyl‐1H‐1,2,4‐triazol‐5(4H)‐one] and 4‐hydr­oxy‐3‐n‐prop­yl‐1H‐1,2,4‐triazol‐5(4H)‐one

The title compounds, C₁₂H₂₀N₆O₂, (I), and C₅H₉N₃O₂, (II), display the characteristic features of 1,2,4‐triazole derivatives. Compound (I) lies about an inversion centre which is at the mid‐point of the central C—C bond. Compound (II) also contains a planar 1,2,4‐triazole ring but differs from (I) in that it has a hydr­oxy group attached to the ring. Mol­ecules of (I) are held together in the crystal structure by inter­molecular N—H⋯O contacts and by weak π–π stacking inter­actions between the 1,2,4‐triazole moieties. Compound (II) contains inter­molecular O—H⋯O and N—H⋯O hydrogen bonds.     

1,3‐Bis(ethylamino)‐2‐nitrobenzene, 1,3‐bis(n‐octylamino)‐2‐nitrobenzene and 4‐ethylamino‐2‐methyl‐1H‐benzimidazole

1,3‐Bis(ethylamino)‐2‐nitrobenzene, C₁₀H₁₅N₃O₂, (I), and 1,3‐bis(n‐octylamino)‐2‐nitrobenzene, C₂₂H₃₉N₃O₂, (II), are the first structurally characterized 1,3‐bis(n‐alkylamino)‐2‐nitrobenzenes. Both molecules are bisected though the nitro N atom and the 2‐C and 5‐C atoms of the ring by twofold rotation axes. Both display intramolecular N—H...O hydrogen bonds between the amine and nitro groups, but no intermolecular hydrogen bonding. The nearly planar molecules pack into flat layers ca 3.4 Å apart that interact by hydrophobic interactions involving the n‐alkyl groups rather than by π–π interactions between the rings. The intra‐ and intermolecular interactions in these molecules are of interest in understanding the physical properties of polymers made from them. Upon heating in the presence of anhydrous potassium carbonate in dimethylacetamide, (I) and (II) cyclize with formal loss of hydrogen peroxide to form substituted benzimidazoles. Thus, 4‐ethylamino‐2‐methyl‐1H‐benzimidazole, C₁₀H₁₃N₃, (III), was obtained from (I) under these reaction conditions. Compound (III) contains two independent molecules with no imposed internal symmetry. The molecules are linked into chains via N—H...N hydrogen bonds involving the imidazole rings, while the ethylamino groups do not participate in any hydrogen bonding. This is the first reported structure of a benzimidazole derivative with 4‐amino and 2‐alkyl substituents.     

(RS)‐6‐Ethyl 2‐carboxy‐1,2,3,4‐tetra­hydro­azulene‐6‐carboxylate

The title compound, C₁₄H₁₆O₄, was obtained during the synthesis of 2,6‐disubstituted azulene derivatives. In the partially reduced azulene skeleton, the absence of a H atom at the ester substitutent position of the seven‐membered ring, as well as lengthened double bonds, indicate a conjugative stabilized system with two overlaid tautomers.     

(R)‐(+)‐2,2′‐Bis­(di­phenyl­phosphinoyl)‐1,1′‐bi­naphthyl

The title compound, BINAP oxide, C₄₄H₃₂O₂P₂, (I), was synthesized by direct oxidation of (R)‐(+)‐2,2′‐bis­(di­phenyl­phosphino)‐1,1′‐bi­naphthyl (BINAP) with tert‐butyl hydro­peroxide in toluene solution. The angle between the naphthyl planes of the bi­naphthyl group is 94.17 (3)°.     

Cobalt nanoparticles anchored to porous silicon as a novel modifier for the construction of enzyme‐free hydrogen peroxide screen‐printed sensor

In this work, a screen‐printed carbon electrode (SPCE) was modified with a cobalt/porous silicon (Co@PSi) nanocomposite powder to develop a nonenzymatic sensor for the detection of hydrogen peroxide. The Co@PSi nanocomposite was synthesized through the chemical reaction between silicon powder in a HF/HNO₃ solution and cobalt cations. In this process, cobalt nanoparticles were anchored on the porous silicon. The structure and morphology of the synthesized nanocomposite were investigated by X‐ray diffraction, Fourier transform infrared spectroscopy, X‐ray photoemission spectroscopy, energy dispersive X‐ray spectroscopy, and field‐emission scanning electron microscopy. The constructed nonenzymatic, screen‐printed sensors based on the Co@PSi nanocomposite showed perfect electrocatalytic oxidation response to hydrogen peroxide over the range 1–170 and 170–3,770 μmol/L with the limit of detection of 0.8 μmol/L. In addition, the Co@PSi‐SPCE sensor exhibited good selectivity for the determination of H₂O₂ in the presence of common interfering species including glucose, ascorbic acid, uric acid, dopamine, nitrate, and nitrite ions. The constructed electrochemical sensor was successfully used for the determination of H₂O₂ in real samples.     

Methyl 2‐(4‐bromophenyl)‐1‐(5‐tert‐butyl‐1H‐pyrazol‐3‐yl)‐1H‐benzimidazole‐5‐carboxylate: a hydrogen‐bonded chain of edge‐fused centrosymmetric rings

In the title compound, C₂₂H₂₁BrN₄O₂, the imidazole and pyrazole rings are almost orthogonal to each other, but the ester unit is effectively coplanar with the adjacent aryl rings. The molecules are linked into a chain of edge‐fused centrosymmetric rings by a combination of N—H...O and C—H...π(arene) hydrogen bonds.     

1,6,11,16‐Tetra­oxacyclo­eicosane‐2,5,12,15‐tetra­one

The 20‐membered ring of the title compound, C₁₆H₂₄O₈, adopts an approximately flat rectangular structure with three‐ and seven‐bond sides and lies across a crystallographic center of inversion. The corners of the ring occur at both ends of one of the planar ester segments. All of the carbonyl O atoms are involved in inter­molecular C—H⋯O hydrogen bonds.     

Self‐inclusion in 5,11,17,23‐tetra‐tert‐butyl‐26,27,28‐tri­hydroxy­‐25‐(methoxy­carbonyl­methoxy)calix­[4]­arene chloro­form trisolvate

The title compound, C₄₇H₆₀O₆·3CHCl₃, is the first example of a lower‐rim mono‐ester calixarene derivative to be crystallographically characterized. The cone conformation adopted by the macrocycle is stabilized by three intramolecular hydrogen bonds. Self‐inclusion of the methyl ester chain in the cavity of an adjacent mol­ecule gives rise to infinite chains parallel to the c axis. C—H⋯π interactions involving the methyl group most imbedded in the cavity contribute to the stabilization of the system.     

Racemic isopropyl 1,4‐dihydro‐2,6‐dimethyl‐4‐(6‐methyl‐2‐pyridyl)‐3‐nitropyridine‐5‐carboxylate hemi­benzene solvate

This analysis establishes the rotameric orientation of the pyridyl‐ring N atom of the title compound, C₁₇H₂₁N₃O₄·0.5C₆H₆, as antiperiplanar (ap) to the 1,4‐dihydropyridine H‐4, the absence of an intramolecular hydrogen bond between the 1,4‐dihydropyridine NH and the pyridyl‐N atom, and the unusual planarity of the 1,4‐dihydropyridine ring.     

3‐[5‐(4‐Chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionic acid and the corresponding methyl ester

The synthesis of 3‐[5‐(4‐chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionic acid, C₁₉H₁₇ClN₂O₃, (I), and its corresponding methyl ester, methyl 3‐[5‐(4‐chlorophenyl)‐1‐(4‐methoxyphenyl)‐1H‐pyrazol‐3‐yl]propionate, C₂₀H₁₉ClN₂O₃, (II), is regiospecific. However, correct identification of the regioisomer formed by spectroscopic techniques is not trivial and single‐crystal X‐ray analysis provided the only means of unambiguous structure determination. Compound (I) crystallizes with Z′ = 2. The propionic acid groups of the two crystallographically unique molecules form a hydrogen‐bonded dimer, as is typical of carboxylic acid groups in the solid state. Conformational differences between the methoxybenzene and pyrazole rings give rise to two unique molecules. The structure of (II) features just one molecule in the asymmetric unit and the crystal packing makes greater use than (I) of weak C—H...A interactions, despite the lack of any functional groups for classical hydrogen bonding.     

Cu(II)–Schiff base complex‐functionalized magnetic Fe3O4 nanoparticles: a heterogeneous catalyst for various oxidation reactions

Cu(II)–Schiff base complex‐functionalized magnetic Fe₃O₄ nanoparticles were prepared and characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy techniques. This compound acts as a highly active and selective catalyst for the oxidation of sulfides and thiols. These reactions can be carried out in ethanol or solvent‐free conditions in the presence of hydrogen peroxide with complete selectivity and very high conversion under mild reaction conditions. The designed catalytic system prevents effectively the over‐oxidation of sulfides to sulfones. Separation and recycling can also be easily done using a simple magnetic separation process. Copyright © 2015 John Wiley & Sons, Ltd.     

4‐Ethoxycarbonyl‐3‐hydroxy‐3‐phenylcyclohexanone

The title compound, ethyl 2‐hydroxy‐4‐oxo‐2‐phenyl­cyclo­hexane­carboxyl­ate, C₁₅H₁₈O₄, was obtained by a Michael–Aldol condensation and has the cyclo­hexanone in a chair conformation. The attached hydroxy, ethoxy­carbonyl and phenyl groups are disposed in β‐axial, β‐equatorial and α‐­equatorial configurations, respectively. An intermolecular hydrogen bond, with an O?O distance of 2.874 (2) Å, links the OH group and the ring carbonyl. Weak intermolecular C—H?O=C (ester and ketone), O—H?O=C (ketone) and C—H?OH hydrogen bonds exist.     

rac‐(Z)‐Ethyl 2‐bromo‐2‐[(3R,5R)‐3‐bromo‐5‐methyl­tetra­hydro­furan‐2‐yl­idene]acetate

In the title compound, C₉H₁₂Br₂O₃, a (tetra­hydro­furan‐2‐yl­idene)acetate, the double bond has the Z form. In the tetra­hydro­furan group, the relative configuration of the Br atom in the 3‐position and the methyl group in the 5‐position is anti. The compound crystallizes with two independent mol­ecules per asymmetric unit and, in the crystal structure, the individual mol­ecules are linked to their symmetry‐equivalent mol­ecules by C—H⋯O hydrogen bonds, so forming centrosymmetric hydrogen‐bonded dimers.     

Electrocatalytic Oxidation of Hydrogen Peroxide on Poly(m‐toluidine)‐Nickel Modified Carbon Paste Electrode in Alkaline Medium

The poly(m‐toluidine) film was prepared by using the repeated potential cycling technique in an acidic solution at the surface of carbon paste electrode. Then transition metal ions of Ni(II) were incorporated to the polymer by immersion of the modified electrode in a 0.2 M NiSO₄, also the electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic ability of Ni(II)/poly(m‐toluidine)/modified carbon paste electrode (Ni/PMT/MCPE) was demonstrated by electrocatalytic oxidation of hydrogen peroxide with cyclic voltammetry and chronoamperometry methods in the alkaline solution. The effects of scan rate and hydrogen peroxide concentration on the anodic peak height of hydrogen peroxide oxidation were also investigated. The catalytic oxidation peak current showed two linear ranges with different slopes dependent on the hydrogen peroxide concentration and the lower detection limit was 6.5 μM (S/N=3). The catalytic reaction rate constant, (k_h), was calculated 5.5×10² M^?1 s^?1 by the data of chronoamperometry. This modified electrode has many advantages such as simple preparation procedure, good reproducibility and high catalytic activity toward the hydrogen peroxide oxidation. This method was also applied as a simple method for routine control and can be employed directly without any pretreatment or separation for analysis cosmetics products.     

The hydrogen‐bonding patterns of 3‐phenylpropylammonium benzoate and 3‐phenylpropylammonium 3‐iodobenzoate: generation of chiral crystals from achiral molecules

The crystal structures and hydrogen‐bonding patterns of 3‐phenylpropylammonium benzoate, C₉H₁₄N⁺·C₇H₅O₂⁻, (I), and 3‐phenylpropylammonium 3‐iodobenzoate, C₉H₁₄N⁺·C₇H₄IO₂⁻, (II), are reported and compared. The addition of the I atom on the anion in (II) produces a different hydrogen‐bonding pattern to that of (I). In addition, the supramolecular heterosynthon of (II) produces a chiral crystal packing not observed in (I). Compound (I) packs in a centrosymmetric fashion and forms achiral one‐dimensional hydrogen‐bonded columns through charge‐assisted N—H...O hydrogen bonds. Compound (II) packs in a chiral space group and forms helical one‐dimensional hydrogen‐bonded columns with 2₁ symmetry, consisting of repeating R₄³(10) hydrogen‐bonded rings that are commonly observed in ammonium carboxylate salts containing chiral molecules. This hydrogen‐bond pattern, which has been observed repeatedly in ammonium carboxylate salts, thus provides a means of producing chiral crystal structures from achiral molecules.