Stripping Chronopotentiometry and Stripping Voltammetry of Mixtures of Heavy Metal Ions Producing Close Signals: The Cd(II)‐Pb(II)‐Phthalate System

The effects of the proximity of the signals of two heavy metal ions in stripping voltammetry (SV) and constant‐current stripping chronopotentiometry (SCP) is studied at mercury drop (HMDE) and mercury film (MFE) electrodes. For this purpose, the Cd(II)‐Pb(II)‐phthalate system is used, taking advantage of the approaching of the signals corresponding to Cd(II)‐phthalate and Pb(II)‐phthalate labile complexes as phthalate is added to mixtures of Cd(II) and Pb(II)‐ions. The results are compared with those obtained by differential pulse polarography (DPP) and by stripping measurements on the Pb(II)‐phthalate system alone, showing discrepancies in SCP data under nondepletive conditions and negligible differences in the other cases.     

Comparison of constant-current stripping chronopotentiometry and anodic stripping voltammetry in metal speciation studies using mercury drop and film electrodes

Capabilities for heavy metal speciation of anodic stripping voltammetry (ASV) and constant-current stripping chronopotentiometry (SCP) in both mercury drop (HMDE) and mercury film rotating disk (MFE-RDE) electrodes are compared. For this purpose, the Cd(II)–glycine and Cd(II)–polymethacrylate (PMA) systems are used as models of simple labile and macromolecular labile complexes adsorbing onto the electrode, respectively. The results suggest that SCP could be a valuable alternative to the more widespread ASV in this kind of study. Concerning the electrode, the MFE-RDE is less user-friendly than the HMDE, but presents a better definition of both the hydrodynamic conditions during the deposition step and the stripping regime during the oxidation. An important interference in SCP is the dissolved oxygen, which can be minimised by combining relatively large oxidation currents and low stirring rates. Moreover, for Cd–PMA, double peaks have been observed in both ASV and SCP, which seems to be due to the lack of enough ligand excess to complex the metal ions released by the amalgam oxidation. Anyway, this problem can be minimised by optimising the rotation rate of the electrode and ensuring enough ligand excess.     

Properties of Poly(sodium 4‐styrenesulfonate)‐Ionic Liquid Composite Film and Its Application in the Determination of Trace Metals Combined with Bismuth Film Electrode

A new kind of bismuth film modified electrode to sensitively detect trace metal ions based on incorporating highly conductive ionic liquids 1‐butyl‐3‐methyl‐imidazolium hexafluorophosphate (BMIMPF₆) in solid matrices at glassy carbon (GC) was investigated. Poly(sodium 4‐styrenesulfonate) (PSS), silica, and Nafion were selected as the solid matrices. The electrochemical properties of the mixed films modified GC were evaluated. The electron transfer rate of Fe(CN)₆^4?/Fe(CN)₆^3? can be effectively improved at the PSS‐BMIMPF₆ modified GC. The bismuth modified PSS‐BMIMPF₆ composite film electrodes (GC/PSS‐BMIMPF₆/BiFEs) displayed high mechanical stability and sensitive stripping voltammetric performances for the determination of trace metal cations. The GC/PSS‐BMIMPF₆/BiFE exhibited well linear response to both Cd(II) and Pb(II) over a concentration range from 1.0 to 50 μg L^?1. And the detection limits were 0.07 μg L^?1 for Cd(II) and 0.09 μg L^?1 for Pb(II) based on three times the standard deviation of the baseline with a preconcentration time of 120 s, respectively. Finally, the GC/PSS‐BMIMPF₆/BiFEs were successfully applied to the determination of Cd(II) and Pb(II) in real sample, and the results of present method agreed well with those of atomic absorption spectroscopy.     

Preparation of poly(vinylalcohol)/poly(acrylamide‐co‐vinyl imidazole)/γ‐Fe2O3 semi‐IPN nanocomposite and their application for removal of heavy metal ions from water

A series of magnetic semi‐interpenetrating polymer network (semi‐IPN) hydrogels was prepared in one‐stage strategy composed of linear poly(vinyl alcohol) (PVA) chains and magnetic γ‐Fe₂O₃ nanoparticles entrapped within the cross‐linked poly(acrylamide‐co‐vinylimidazole) (poly(AAm‐co‐VI)) network. The influence of PVA, weight ratio of AAm:VI, γ‐Fe₂O₃, and MBA on the swelling properties of the obtained nanocomposite hydrogels was evaluated. The prepared magnetic semi‐IPN hydrogels were fully characterized and used as absorbent for removal of Pb(II) and Cd(II) from water. Factors that influence the metal ion adsorption such as solution pH, contact time, initial metal ion concentration, and temperature were studied in details. The experimental results were reliably described by Langmuir adsorption isotherms. The adsorption capacity of semi‐IPN nanocomposite for Pb(II) and Cd(II) were175.80 and 149.76 mg g^?1, respectively. The kinetic experimental data indicated that the chemical sorption is the rate‐determining step. According to thermodynamic studies, Pb(II) and Cd(II) adsorption on the hydrogels was endothermic and also chemical in nature. The prepared magnetic PVA/poly(AAm‐co‐VI) semi‐IPN hydrogels could be employed as efficient and low‐cost adsorbents of heavy metal ions from water. Copyright © 2016 John Wiley & Sons, Ltd.     

Voltammetric Sensing of Mercury and Copper Cations at Poly(EDTA‐like) Film Modified Electrode

Complexing polymer‐coated electrodes have been synthesized by oxidative electropolymerization of ethylenediamine tetra‐N‐(3‐pyrrole‐1‐yl)propylacetamide (monomer L ). The presence of four polymerizable pyrrole fragments on the same EDTA skeleton was thought to confer enhanced rigidity and controlled dimensionality to the resulting complexing materials, which were used for the electrochemical detection of Hg(II), Cu(II), Pb(II) and Cd(II) ions by means of the chemical preconcentration‐anodic stripping technique. The polyamide electrode material showed particularly a significant selectivity towards mercury ions, even in the presence of a large excess of other metal cations. Moreover, the use of imprinted polymer‐coated electrodes prepared by electropolymerization of L in the presence of metal cations turned out to significantly improve the detection limits, down to 5×10^?10 mol L^?1 for Hg(II) and Cu(II) species.     

Performance of Ex Situ Bismuth Film Rotating Disk Electrode in Trace Metal Analysis by Stripping Chronopotentiometry: Definition of the Depletion Regime and Optimization of Experimental Parameters

The potentiality of the ex situ deposited bismuth film electrode, allied to the rotation of a glassy carbon disk electrode (BiFE‐RDE), was exploited in trace metal analyses of lead(II) and cadmium(II) by stripping chronopotentiometry (SCP). A single BiFE (6.2 nm film thickness) can be used for a 1‐day term with no significant variation in the analytical signal. The limit of detection (3σ) for a deposition time of 40 s and an oxidation current of 15×10^?9 A was 1.5×10^?8 M for Pb(II) and 3.0×10^?8 M for Cd(II). BiFE‐RDE was successfully applied to the direct SCP determination of lead(II) in a fresh water certified material.     

Differential Pulse Polarographic Determination of Cd(II) and Pb(II) in Milk Samples after Solid‐Phase Extraction Using Amberlite XAD‐2 Resin Modified with 2,2′‐DPED3P

In the present paper novel column solid phase extraction procedure was developed for the determination of Cd(II) and Pb(II) in cows', goats', ewes', buffalos' and humans' milk samples using newly synthesized reagent 2,2′‐DPED₃P (2,2′‐{[1,2‐diphenylethane‐1,2‐diylidene]dinitrilo}diphenol) for preconcentration and separation prior to differential pulse polarography using amberlite XAD‐2 in the ranges of pH 4.0–5.0. The sorbed elements were subsequently eluted with 10 mL of 2 M HCl elutes were analysed by differential pulse polarography (DPP). The interference of foreign ions has also been studied. Effects of various instrumental parameters are investigated and received conditions are optimized. The total metal concentration of the milk samples in the study area were in the following ranges 0.030–0.090 μg L^?1 of Cd(II), 0.009–0.026 μg L^?1 of Pb(II) respectively. The limits of detections were found to be 0.020 and 0.024 μg L^?1 for Cd(II) and Pb(II) respectively by applying a preconcentration factor ～40. The proposed enrichment method was applied successfully for the determination of metal ions in cows', goats', ewes', buffalos' and humans' milk samples.     

Comparison of Cadmium Cd2+ and Lead Pb2+ Binding by Fe2O3@SiO2‐EDTA Nanoparticles – Binding Stability and Kinetic Studies

This study describes the synthesis and characterization of ethylenediaminetetraacetic acid (EDTA) functionalized magnetic nanoparticles of 20 nm in size – Fe₃O₄@SiO₂‐EDTA – which were used as a novel magnetic adsorbent for Cd(II) and Pb(II) binding in aqueous medium. These nanoparticles were obtained in two‐stage synthesis: covering by tetraethyl orthosilicate and functionalization with EDTA derivatives. Nanoparticles were characterized using TEM, FT‐IR, and XPS methods. Metal ions were detected under optimized experimental conditions using Differential Pulse Anodic Stripping Voltammetry (DPASV) and Hanging Mercury Drop Electrode (HDME) techniques. We compared the ability of Fe₃O₄@SiO₂‐EDTA to bind cadmium and lead in concentration of 553.9 μg L^?1 and 647.5 μg L^?1, respectively. Obtained results show that the adsorption rate of cadmium binding was very high. The equilibrium for Fe₃O₄@SiO₂‐EDTA‐Cd(II) was reached within 19 min while for the Fe₃O₄@SiO₂‐EDTA‐Pb(II) was reached within 25 minutes. About 2 mg of nanoparticles was enough to bind 87.5 % Cd(II) and 54.1 % Pb(II) content. In the next step the binding capacity of Fe₃O₄@SiO₂‐EDTA nanoparticles was determined. Only 1.265 mg of Fe₃O₄@SiO₂‐EDTA was enough to bind 96.14 % cadmium ions while 5.080 mg of nanoparticles bound 40.83 % lead ions. This phenomenon proves that the studied nanoparticles bind Cd(II) much better than Pb(II). The cadmium ions binding capacity of Fe₃O₄@SiO₂‐EDTA nanoparticles decreased during storage in 0.5 M KCl solution. Two days of Fe₃O₄@SiO₂‐EDTA storage in KCl solution caused the 32 % increase in the amount of nanoparticles required to bind 60 % of cadmium while eight‐days storage caused further increase to 328 %. The performed experiment confirmed that the storage of nanoparticles in solution without any surfactants reduced their binding capacity. The best binding capacity was observed for the nanoparticles prepared directly before the electrochemical measurements.     

Determination of Trace Tl(I) by Anodic Stripping Voltammetry on Novel Disposable Microfabricated Bismuth‐Film Sensors

This work reports the trace determination of Tl(I) by square‐wave anodic stripping voltammetry (SWASV) on novel microsensors equipped with a bismuth‐film electrode (BiFE). The sensors were fabricated by a multistep microfabrication approach combining sputtering (to deposit the electrode materialm, bismuth‐ and the insulator SiO₂, on the surface of a silicon wafer) and photolithography (to define the geometry of the sensor). The effect of the preconcentration time, the preconcentration potential and the SW stripping parameters were investigated. Using the selected conditions, the 3σ limit of detection was 0.6 µg L^?1 of Tl(I) at a preconcentration time of 240 s and the percent relative standard deviation was 4.3 % at the 10 µg L^?1 level (n=8). In order to eliminate the interference caused by Pb(II) and Cd(II), EDTA was added in the sample solution The method was successfully applied to the determination of Tl(I) in a certified lake water sample. These new sensors exhibit excellent mechanical stability and offer wide scope as mercury‐free disposable sensors for trace metal analysis.     

Analytical Applications of 2,6‐Diacetylpyridine‐bis‐4‐phenyl‐3‐thiosemicarbazone (2,6‐DAPBPTSC): Determination of Cd(II) in Foods and Water Samples

To the determination of trace amount of Cd(II) present in food and water samples, a selective and extractive spectrophotometric method were developed with 2,6‐diacetylpyridine‐bis‐4‐phenyl‐3‐thiosemicarbazone as a complexing agent. The yellowish orange colored metal complex, Cd(II)‐2,6‐DAPBPTSC with 1:1 (M:L) composition was extracted in to cyclohexanol at pH 9.5 and was shows maximum absorbance at λ_max 390 nm. This method obeys Beer's law in the range of 1.12‐11.25 ppm with 0.972 correlation coefficient of Cd(II)‐2,6‐DAPBPTSC complex, which is indicates linearity between the two variables. The molar absorptivity and sandell's sensitivity were found to be 6.088 × 10⁴ L mol^?1 cm^?1 and 0.0018 μg cm^?2, respectively. The instability constant calculated from Asmus' method (1.447 × 10^?4)at room temperature. The precision and accuracy of the method were checked by relative standard deviation (n = 5), 0.929 and its detection limit, 0.0060 μg mL^?1. The interfering effects of various cations and anions were also studied. The proposed method was successfully applied to the determination of Cd(II) in foods and water samples, and was evaluated its performance in terms of Student ‘t’ test and Variance ‘f’ test, which indicates the significance of present method. The inter comparison of the experimental values, using atomic absorption spectrometer (AAS), was also repoted.     

Structure and Photosynthetic Mimicking of Bis（2,6—bis（benzimidazol—2—yl）pyridine）manganese（Ⅱ）

Mn(bzimpy)2(1)[bzimpy=2,6-bis(benzimidazol-2-yl)pyridine],a mononuclear manganese(Ⅱ）complex,was synthesized by the reaction of Mn(OOCMe)2 with bzimpy in absolute ethanol.The complex was structurally characterized by elemental analysis,cyclic voltammetry,and X-ray crystallography.In the complex,the manganese-nitrogen distances were different,and the geometry and the metal ion environment showed the distortion.The cyclic voltammetric measurements have been performed to assess its redox characteristics.The presence of oxidation wave at 0.62V and 0.081V vs.SCE or 0.8V and 1.0v vs.NHE suggested that this complex could catalyze the oxidation of water,therefore,simulate the water-oxidizing complex(WOC) of photosystem Ⅱ (PS Ⅱ).The measurements of photoreduction of 2,6-dichlorophenolindophenol (DCPIP),and oxygen evolution in the manganess-depleted and the comples 1-reconstituted PS Ⅱ preparations just support our conjecture.     

Complexation of N-bis[2-(1,2-dicarboxyethoxy)ethyl]aspartic acid with Cd(II), Hg(II) and Pb(II) ions in aqueous solution

The persistence of widely used chelating agents EDTA and DTPA in nature has been of concern and there is a need for ligands to replace them. In a search for environmentally friendly metal chelating ligands for industrial applications, complex formation equilibria of N-bis[2-(1,2-dicarboxyethoxy)ethyl]aspartic acid (BCA6) with Cd(II), Hg(II) and Pb(II) in aqueous 0.1 M NaNO₃ solution were studied at 25°C by potentiometric titration. Complexation was modeled and the stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. With all metal ions, stable ML^4? complexes dominated the complex formation. The stabilities of Cd(II), Hg(II) and Pb(II) chelates of BCA6 are remarkably lower than those of EDTA and DTPA. Environmental advantages of the use of BCA6 instead of EDTA and DTPA are better biodegradability and lower nitrogen content with a possibility to save chemicals and process steps in pulp bleaching.     

Metal‐Sensitive Hydrothermal Synthesis and Structural Characterization of a Mixed‐Metal and Porous Coordination Polymer Containing 2,3‐Pyridinedicarboxylate

The hydrothermal reaction of 2,3‐pyridinedicarboxylic acid (2,3‐H₂pda) with a mixture of Cd(NO₃)₂ and Ni(NO₃)₂ afforded a coordination polymer, [CdNi(2,3‐pda)₂(H₂O)₃]_∞ ( 1 ); in contrast, that with a mixture of Cd(NO₃)₂ and Zn(NO₃)₂ surprisingly produced a discrete molecule, trans‐[Cd(3‐pa)₂(H₂O)₄] ( 2 ) (3‐pa^? = 3‐pyridinecarboxylate). Since a direct reaction between a single metal salt, Cd(NO₃)₂ or Zn(NO₃)₂, and 3‐pyridinecarboxylic acid (3‐Hpa) under similar hydrothermal conditions yielded different coordination polymers containing 3‐pa^?, it appears that the apparently thermal decarboxylation from ligated 2,3‐pda^2? to 3‐pa^? occurs after complexation of both metal cations, Cd(II) and Zn(II). A new coordination mode, formed for 2,3‐pda^2? in structure 1 , appears to help formation of microporous channels by piling up the observed 2D hydrogen‐bonded heteropolynuclear layers. Each channel apparently consists of two interpenetrating 6³ Cd(II) and Ni(II) nets.     

A 4′‐(4‐carboxyphenyl)‐3,2′:6′,3′′‐terpyridine‐based luminescent cadmium(II) coordination polymer for the detection of 2,4,6‐trinitrophenol

The title coordination polymer, poly[bis[μ3‐4‐(3,2′:6′,3′′‐terpyridin‐4′‐yl)benzoato]cadmium(II)], [Cd(C₂₂H₁₄N₃O₂)₂]_n or [Cd(3‐cptpy)₂]_n, (I), has been synthesized solvothermally and characterized by IR spectroscopy, thermogravimetric analysis, and single‐crystal and powder X‐ray diffraction. The structure is composed of 3‐cptpy^? ligands bridging Cd atoms, with each Cd atom coordinated by six ligands and each ligand coordinating to three Cd atoms. Each Cd atom is in a slightly distorted trans‐N₂O₄ octahedral environment, forming a two‐dimensional layer structure with a (3,6)‐connected topology. Layers are linked to each other by π–π stacking, resulting in a three‐dimensional supramolecular framework. The strong luminescence and good thermal stability of (I) indicate that it can potentially be used as a luminescence sensor. The compound also shows a highly selective and sensitive response to 2,4,6‐trinitrophenol through the luminescence quenching effect.     

Electrochemical Investigation of Heavy Metal Ion Transfer Across the Water/1,2‐Dichloroethane Interface Assisted by 9‐Ethyl‐3‐Carbazolecarboxaldehyde‐Thiosemicarbazone

The transfer of heavy metal ions across the polarized water/1,2‐dichloroethane (1,2‐DCE) interface assisted by 9‐ethyl‐3‐carbazolecarboxaldehyde‐thiosemicarbazone (ECCAT) in the 1,2‐DCE phase has been studied by cyclic voltammetry. Voltammetric waves of Pb(II) and Cd(II) ions were reversible and quasi‐reversible, respectively, whereas that of Hg(II) and Zn(II) ion were irreversible. The voltammogram of Cu(II) ion showed a two‐step wave, however the nature of the transfer could not be satisfactorily evaluated by analyzing the cyclic voltammetric data. When Ni(II) and Co(II) was used no peak was visible under the experimental conditions used in this study. The dependence of the half‐wave potentials of Pb(II) and Cd(II) ions on the ligand concentration reveals that their ion‐transfer is assisted by the formation of 1:3 metal‐ECCAT complex in 1,2‐DCE. The over‐all association constants of [Pb(ECCAT)₃]²⁺ and [Cd(ECCAT)₃]²⁺ complexes in DCE‐phase have been determined to be log β =14.03 and log β =15.44, respectively.     

Theoretical investigation on sulfur‐containing chelating resin‐divalent metal complexes

The complex structures and interactions of sulfur‐containing chelating resin poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfide (PVBS), poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfoxide (PVBSO), and poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfone (PVBSO₂) with divalent metal chlorides (Cu(II), Ni(II), Zn(II), Cd(II), and Pd(II)) were investigated theoretically. Results indicate that PVBS tends to coordinate with metal ions by sulfur and oxygen atoms forming five‐membered ring chelating complexes; while PVBSO and PVBSO₂ prefer to interact with metal ions by the oxygen atom of the sulfoxide or sulfone and hydroxyl group to form six‐membered ring chelating compounds. Theoretical calculations reveal that sulfur atoms of PVBS are the main contributor when coordinate with metal ions, while oxygen atoms also take part in the coordination with Cu(II), Zn(II), and Cd(II). As for PVBSO, the oxygen atoms of sulfoxide group play a key role in the coordination, but sulfur and hydroxyl oxygen also participate in the coordination. Similarly, sulfone group oxygen atoms of PVBSO₂ dominate the coordination of Ni(II), Cu(II), and Pd(II), while the affinities of Zn(II) and Cd(II) are mainly attributed to the hydroxyl oxygen atoms. The computational results are in good agreement with the XPS analysis. Combined the theoretical and experimental results, further understanding of the structural information on the complexes was achieved and the adsorption mechanism was confirmed. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Assembly of Three 2D Metal‐Organic Frameworks (MOFs) Derived from Flexible Ligands, 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene (3‐bpd) and/or 1,2‐bis(4‐pyridyl)ethane (dpe)

Three coordination polymers, {[Cd(3‐bpd)₂(NCS)₂]×C₂H₅OH}_n ( 1 ), {[Cd(3‐bpd)(dpe)(NO₃)₂]×(3‐bpd)}₂ ( 2 ), {[Cd(dpe)₂(NCS)₂]×3‐bpd×2H₂O}_n ( 3 ) (3‐bpd = 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene; dpe = 1,2‐bis(4‐pyridyl)ethane), were prepared and structurally characterized by a single‐crystal X‐ray diffraction method. In compound 1 , each Cd(II) ion is six‐coordinate bonded to six nitrogen atoms from four 3‐bpd and two NCS^? ligands. The 3‐bpd acts as a bridging ligand connecting the Cd(II) ion to generate a 2D layered metal‐organic framework (MOF) by using a rhomboidal‐grid as the basic building units with the 4⁴ topology. In compound 2 , the Cd(II) ion is also six‐coordinate bonded to four nitrogen atoms of two 3‐bpd, two dpe and two oxygen atoms of two NO₃^? ligands. The 3‐bpd and dpe ligands both adopt bis‐monodentate coordination mode connecting the Cd(II) ions to generate a 2D layered MOF by using a rectangle‐grid as the basic building units with the 4⁴ topology. In compound 3 , two crystallographically independent Cd(II) ions are both coordinated by four nitrogen atoms of dpe ligands in the basal plane and two nitrogen atom of NCS^? in the axial sites. The dpe acts as a bridging ligand to connect the Cd(II) ions forming a 2D interpenetrating MOFs by using a square‐grid as the basic unit with the 4⁴ topology. All of their 2D layered MOFs in compounds 1 ‐ 3 are then arranged in a parallel non‐interpenetrating ABAB—packing manner in 1 and 2 , and mutually interpenetrating manner in 3 , respectively, to extend their 3D supramolecular architectures with their 1D pores intercalated with solvent (ethanol in 1 or H₂O in 3 ) or free 3‐bpd molecules in 2 and 3 , respectively. The photoluminescence measurements of 1 ‐ 3 reveal that the emission is tentatively assigned to originate from π‐π* transition for 1 and 2 and probably due to ligand‐center luminescence for compounds 3 , respectively.     

Bismuth Film Microelectrode Modified with Overoxidized Poly‐1‐Naphtylamine Protective Membrane for Enhanced Stripping Voltammetric Detection

The application of protective overoxidized poly‐1‐naphtylamine membrane (ONAP) is demonstrated in combination with bismuth film microelectrode (ONAP‐BiFME) for anodic stripping voltammetric measurement of trace heavy metals in the presence of some selected surfactants. The ONAP membrane was electrochemically deposited on the surface of bare single carbon fiber microelectrode followed by the in situ or ex situ preparation of the bismuth film. The key operational parameters influencing the stripping performance of the ONAP‐BiFME were optimized and its electroanalytical performance was examined in the model solution containing Cd(II) and Pb(II) as test metal ions. The ONAP‐BiFME exhibited significantly enhanced stripping voltammetric response (approximately 70% for Cd(II) and 45% for Pb(II)) in comparison with unmodified BiFME in the absence of surfactants. In the presence of high concentrations, e.g., 20 mg L^?1, of anionic or cationic surfactants, the stripping signal for, e.g., Cd(II) decreased for less than 6% at the ONAP‐BiFME, whereas at the unmodified BiFME the signal attenuated considerably (approximately 38%). Moreover, in the presence of 10 mg L^?1 of nonionic surfactant Triton X‐100, the stripping signals at the bare BiFME were almost completely suppressed, whereas at the ONAP‐BiFME exhibited linear concentration behavior in the examined concentration range from 10 to 120 μg L^?1, with the calculated limit of detection of 5.0 μg L^?1 and 3.4 μg L^?1 for Cd(II) and Pb(II), respectively in connection with 60 s accumulation time. The attractive behavior of ONAP‐modified BiFME expands the applicability of bismuth‐based electrodes for measurement of trace heavy metals in real environments, where the presence of more complex matrix can be expected.     

Cadmium O‐alkylxanthates as CVD precursors of CdS: a chemical characterization

Cadmium bis(O‐alkylxanthates) are potential single‐source molecular precursors for the chemical vapor deposition (CVD) of Cd(II) sulfide thin films. In this work, a multi‐technique characterization of Cd(O‐RXan)₂ compounds [where O‐RXan is CH₃CH₂OCS₂ (O‐EtXan) or (CH₃)₂CHOCS₂ (O‐ⁱPrXan)] is performed by means of several analytical methods (extended x‐ray absorption fine structure, Raman, Fourier transform infrared and optical absorption, spectroscopics ¹H and ¹³C NMR, thermal analysis and mass spectrometry) for a thorough investigation of their structure and chemical–physical properties. The most important results concerning the chemical behavior under different experimental conditions, with particular attention to relevant properties for CVD applications, are presented and discussed. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis,X‐ray characterization and density functional theory studies of N6‐benzyl‐N6‐methyladenine–M(II) complexes (M = Zn,Cd): The prominent role of π–π, C–H···π and anion–π interactions

We report the synthesis and X‐ray characterization of the N⁶‐benzyl‐N⁶‐methyladenine ligand (L) and three metal complexes, namely [Zn(HL)Cl₃]·H₂O ( 1 ), [Cd(HL)₂Cl₄] ( 2 ) and [H₂L]₂[Cd₃(μ‐L)₂(μ‐Cl)₄Cl₆]·3H₂O ( 3 ). Complex 1 consists of the 7H‐adenine tautomer protonated at N3 and coordinated to a tetrahedral Zn(II) metal centre through N9. The octahedral Cd(II) in complex 2 is N⁹‐coordinated to two N⁶‐benzyl‐N⁶‐methyladeninium ligands (7H‐tautomer protonated at N3) that occupy apical positions and four chlorido ligands form the basal plane. Compound 3 corresponds to a trinuclear Cd(II) complex, where the central Cd atom is six‐coordinated to two bridging μ‐L and four bridging μ‐Cl ligands. The other two Cd atoms are six‐coordinated to three terminal chlorido ligands, to two bridging μ‐Cl ligands and to the bridging μ‐L through N3. Essentially, the coordination patterns, degree of protonation and tautomeric forms of the nucleobase dominate the solid‐state architectures of 1 – 3 . Additionally, the hydrogen‐bonding interactions produced by the endocyclic N atoms and NH groups stabilize high‐dimensional‐order supramolecular assemblies. Moreover, energetically strong anion–π and lone pair (lp)–π interactions are important in constructing the final solid‐state architectures in 1 – 3 . We have studied the non‐covalent interactions energetically using density functional theory calculations and rationalized the interactions using molecular electrostatic potential surfaces and Bader's theory of atoms in molecules. We have particularly analysed cooperative lp–π and anion–π interactions in 1 and π⁺–π⁺ interactions in 3 .