Synthesis,morphology, and viscoelastic properties of cyanate ester/polyhedral oligomeric silsesquioxane nanocomposites

Cyanate ester (PT‐15, Lonza Corp) composites containing the inorganic–organic hybrid polyhedral oligomeric silsesquioxane (POSS) octaaminophenyl(T₈)POSS [ 1 ; (C₆H₄NH₂)₈(SiO_1.5)₈] were synthesized. These PT‐15/POSS‐ 1 composites (99/1, 97/3, and 95/5 w/w) were characterized by X‐ray diffraction (XRD), transmission election microscopy (TEM), dynamic mechanical thermal analysis, solvent extraction, and Fourier transform infrared. The glass‐transition temperatures (T_g's) of the composite with 1 wt % 1 increased sharply versus the neat PT‐15, but 3 and 5 wt % 1 in these cyanate ester composites depressed T_g. All the PT‐15/POSS composites exhibited higher storage modulus (E′) values (temperature > T_g) than the parent resin, but these values decreased from 1 to 5 wt % POSS. The loss factor peak intensities decreased and their widths broadened upon the incorporation of POSS. XRD, TEM, and IR data were all consistent with the molecular dispersion of 1 due to the chemical bonding of the octaamino POSS‐ 1 macromer into the continuous cyanate ester network phase. The amino groups of 1 reacted with cyanate ester functions at lower temperatures than those at which cyanate ester curing by cyclotrimerization occurred. In contrast to 1 , 3‐cyanopropylheptacyclopentyl(T₈)POSS [ 2 ; (C₅H₉)₇(SiO_1.5)₈CH₂CH₂CH₂CN] had low solubility in PT‐15 and did not react with the resin below or at the cure temperature. Thus, phase‐separated aggregates of 2 were found in samples containing 1–10 wt % 2 . Nevertheless, the T_g and E′ values (temperature > 285 °C) of these composites increased regularly with an increase in 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3887–3898, 2005     

Synthesis and self‐assembly of tadpole‐shaped organic/inorganic hybrid poly(N‐isopropylacrylamide) containing polyhedral oligomeric silsesquioxane via RAFT polymerization

Aminopropylisobutyl polyhedral oligomeric silsesquioxane (POSS) was used to prepare a POSS‐containing reversible addition‐fragmentation transfer (RAFT) agent. The POSS‐containing RAFT agent was used in the RAFT polymerization of N‐isopropylacrylamide (NIPAM) to produce tadpole‐shaped organic/inorganic hybrid Poly(N‐isopropylacrylamide) (PNIPAM). The results show that the POSS‐containing RAFT agent was an effective chain transfer agent in the RAFT polymerization of NIPAM, and the polymerization kinetics were found to be pseudo‐first‐order behavior. The thermal properties of the organic/inorganic hybrid PNIPAM were also characterized by differential scanning calorimetry. The glass transition temperature (T_g) of the tadpole‐shaped inorganic/organic hybrid PNIPAM was enhanced by POSS molecule. The self‐assembly behavior of the tadpole‐shaped inorganic/organic hybrid PNIPAM was investigated by atomic force microscopy and dynamic light scattering. The results show the core‐shell nanostructured micelles with a uniform diameter. The diameter of the micelle increases with the molecular weight of the hybrid PNIPAM. Surprisingly, the micelle of the tadpole‐shaped inorganic/organic hybrid PNIPAM with low molecular weight has a much bigger and more compact core than that with high molecular weight. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7049–7061, 2008     

Organic–inorganic polyurethanes with double decker silsesquioxanes in the main chains: Morphologies,surface hydrophobicity,and shape memory properties

In this contribution, we reported an investigation of the morphologies, surface hydrophobicity, and shape memory properties of the organic–inorganic polyurethanes with double decker silsesquioxane (DDSQ) in the main chains. It was found that the organic–inorganic polyurethanes were microphase‐separated and that the POSS cages in the main chains were self‐organized into the spherical microdomains with the size of 10–50 nm in diameter. The introduction of POSS cages into the main chains resulted in the enhancement of glass transition temperatures (T_g's). In the meantime, the surface dewettability of the materials was significantly enhanced. X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) indicates the improvement of the surface hydrophobicity resulted from the enrichment of POSS at the surfaces of the polyurethanes. The mechanical analyses, such as dynamic mechanical analysis (DMA) and creep‐recovery analysis (CRA), indicate that the POSS microdomains dispersed in the polyurethanes behaved as the physical crosslinking sites and promoted the formation of the crosslinked networks. Owing to the introduction of DDSQ into the main chains, the organic–inorganic polyurethanes significantly displayed shape memory properties, in marked contrast to the unmodified and linear polyurethane. The shape memory behavior has been addressed on the formation of the strong physically crosslinked networks in the organic–inorganic polyurethanes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 893–906     

Organic/inorganic hybrid star-shaped block copolymers of poly(l-lactide) and poly(N-isopropylacrylamide) with a polyhedral oligomeric silsesquioxane core: Synthesis and self-assembly

The star-shaped organic/inorganic hybrid poly(l-lactide) (PLLA) based on polyhedral oligomeric silsesquioxane (POSS) was prepared using octa(3-hydroxypropyl) polyhedral oligomeric silsesquioxane as initiator via ring-opening polymerization (ROP) of l-lactide (LLA). The molecular weight of POSS-containing star-shaped hybrid PLLA (POSSPLLA) can be well controlled by the feed ratio of LLA to initiator. The POSSPLLA was further functionalized into the macromolecular reversible addition-fragmentation transfer (RAFT) agent for the polymerization of N-isopropylacrylamide (NIPAM), leading to the POSS-containing star-shaped organic/inorganic hybrid amphiphilic block copolymers, poly(l-lactide)–block–poly(N-isopropylacrylamide) (POSS(PLLA–b–PNIPAM)). The self-assembly behavior of POSS(PLLA–b–PNIPAM) block copolymers in aqueous solution was investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and atomic force microscopy (AFM). DLS showed the PNIPAM block in the aggregates is temperature-responsive and its phase-transition is reversible. TEM proved that the star-shaped POSS(PLLA–b–PNIPAM) amphiphilic block copolymers can self-assemble into the vesicles in aqueous solution. The vesicular wall and coronas are composed of the hydrophobic POSS core and PLLA, and hydrophilic PNIPAM blocks, respectively. Therefore, POSSPLLA and POSS(PLLA–b–PNIPAM) block copolymers, as a class of novel organic–inorganic hybrid materials with the advantageous properties, can be potentially used in biological and medical fields.     

Effects of TriSilanolIsobutyl-POSS on thermal stability of methylsilicone resin

Methylsilicone resin/polyhedral oligomeric silsesquioxane (POSS) composites with various proportions of POSS monomer were synthesized by the reaction of functionalized TriSilanolIsobutyl-POSS macromonomer with hydroxyl-terminated methylsilicone resin. The structures of the obtained hybrid polymers were characterized with Fourier-transformed infrared (FT-IR) and transmission electron microscopy (TEM). The FT-IR spectra suggested successful bonding of TriSilanolIsobutyl-POSS and methylsilicone resin. TEM analysis showed that POSS can dissolve in methylsilicone resin at the molecular level. The influences of TriSilanolIsobutyl-POSS on the thermal stability and degradation behavior of methylsilicone resin were studied by thermogravimetric analysis (TGA), solid-state ²⁹Si NMR and X-ray photoelectron spectroscopy (XPS). All these techniques showed that TriSilanolIsobutyl-POSS incorporation results in increased decomposition temperatures and oxidation resistance, primarily by reducing the effect of silanol end groups on the thermolysis through condensation reaction of Si-OH groups and partial loss of isobutyl followed by the formation of an inorganic SiO₂ layer to prevent methylsilicone from further degradation.     

Well-defined difunctional POSS macromers and related organic–inorganic polymers: Precision synthesis,structure and properties

Polyhedral oligomeric silsesquioxanes (POSS) are a class of well-defined organic–inorganic stereo molecules comprising inorganic Si O Si cores and peripheral organic moieties. Since they were first reported in 1946 by Scott et al., there have been a great number of investigations on the use of POSS macromers as the building blocks to access the organic–inorganic composites with polymers. In most of cases, monofunctional POSS macromers are employed and the linear hybrid polymers are obtained. Under this circumstance, POSS cages act as the side or end groups whereas the main chains of the polymers remain unchanged. Occasionally, octafunctional POSS macromers are involved, resulting in the generation of crosslinked (or network-like) hybrids. Recently, well-defined difunctional POSS macromers have increasingly provoked a considerable attention of investigators. From the synthetic methodology of POSS macromers to the approaches to introduce them into polymers, difunctional POSS macromers have the features quite different from mono- (or octa-) functional POSS. More importantly, the related organic–inorganic hybrids possess the different morphologies and properties. In the past years, there has been a rapid increase in the number of literatures on the studies on well-defined difunctional POSS and the related organic–inorganic hybrids. Nonetheless, the related review is lacking. In this contribution, we would summarize the recent progress in this regard, from the synthesis of POSS macromers, the approaches of introducing the POSS macromers into polymers to the correlation of morphologies with properties of the organic–inorganic hybrids. In addition, perspectives and challenges for the further advancement are envisaged and discussed.     

The First Europium(III) β‐Diketonate Complex Functionalized Polyhedral Oligomeric Silsesquioxane

The first europium(III) β‐diketonate complex functionalized polyhedral oligomeric silsesquioxane (POSS) has been obtained by immobilization of such a complex at a silicon vertex of the POSS cage through the complexation of Eu³⁺ ions with thenoyltrifluoroacetone‐functionalized POSS. The new molecular hybrid material is liquid at room temperature, and shows bright‐red emission when irradiated with UV light due to energy transfer from the thenoyltrifluoroacetone ligand to the coordinated Eu³⁺ ions. Thermal analysis has revealed a significant improvement in the thermal stability of the material compared with tris(2‐thenoyltrifluoroacetonate)europium(III) dihydrate, [Eu(TTA)₃] ? 2 H₂O. In the context of recent advances in printable electronic technology, this novel luminescent organic liquid with the characteristic emission of Eu³⁺ may potentially be useful in the development of next‐generation organic devices such as flexible displays.     

Preparation,Tg improvement,and thermal stability enhancement mechanism of soluble poly(methyl methacrylate) nanocomposites by incorporating octavinyl polyhedral oligomeric silsesquioxanes

The soluble poly(methyl methacrylate‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PMMA–POSS) hybrid nanocomposites with improved T_g and high thermal stability were synthesized by common free radical polymerization and characterized using FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA. The POSS contents in the nanocomposites were determined based on FTIR spectrum, revealing that it can be effectively adjusted by varying the feed ratio of POSS in the hybrid composites. On the basis of the ¹H NMR analysis, the number of the reacted vinyl groups on each POSS molecules was determined to be about 6–8. The DSC and TGA measurements indicated that the hybrid nanocomposites had higher T_g and better thermal properties than the pure PMMA homopolymer. The T_g increase mechanism was investigated using FTIR, displaying that the dipole–dipole interaction between PMMA and POSS also plays very important role to the T_g improvement besides the molecular motion hindrance from the hybrid structure. The thermal stability enhances with increase of POSS content, which is mainly attributed to the incorporation of nanoscale inorganic POSS uniformly dispersed at molecular level. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5308–5317, 2007     

Supramolecular inclusion complexation of polyhedral oligomeric silsesquioxane capped poly(ε‐caprolactone) with α‐cyclodextrin

Supramolecular inclusion complexes (ICs) involving polyhedral oligomeric silsesquioxane (POSS) capped poly(?‐caprolactone) (PCL) and α‐cyclodextrin (α‐CD) were investigated. POSS‐terminated PCLs with various molecular weights were prepared via the ring‐opening polymerization of ?‐caprolactone (CL) with 3‐hydroxypropylheptaphenyl POSS as an initiator. Because of the presence of the bulky silsesquioxane terminal group, the inclusion complexation between α‐CD and the POSS‐capped PCL was carried out only with a single end of a PCL chain threading inside the cavity of α‐CD, which allowed the evaluation of the effect of the POSS terminal groups on the efficiency of the inclusion complexation. The X‐ray diffraction results indicated that the organic–inorganic ICs had a channel‐type crystalline structure. The stoichiometry of the organic–inorganic ICs was quite dependent on the molecular weights of the POSS‐capped PCLs. With moderate molecular weights of the POSS‐capped PCLs (e.g., M_n =3860 or 9880), the stoichiometry was 1:1 mol/mol (CL unit/α‐CD), which was close to the literature value based on the inclusion complexation of α‐CD with normal linear PCL chains with comparable molecular weights. When the PCL chains were shorter (e.g., for the POSS‐capped PCL of M_n = 1720 or 2490), the efficiency of the inclusion complexation decreased. The decreased efficiency of the inclusion complexation could be attributed to the lower mobility of the bulky POSS group, which restricted the motion of the PCL chain attached to the silsesquioxane cage. This effect was pronounced with the decreasing length of the PCL chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1247–1259, 2007     

UV Curable Hard Transparent Hybrid Coating Materials on Polycarbonate Prepared by the Sol-Gel Method

UV curable, hard, transparent inorganic/organic composites with covalent links between the inorganic and the organic networks were prepared by the sol-gel method. These hybrid coating materials were synthesized using a commercially available, acrylate end-capped polyester or polyurethane oligomeric resin (EBC80, EBC284), hexanedioldiacrylate (HDDA) as a reactive solvent, 3-(trimethoxysilyl)propoxymethacrylate (TMSPM) as a coupling agent between the organic and inorganic phase, and a metal alkoxide, tetraethylorthosilicate (TEOS). The materials were applied on primer or oxygen plasma pretreated polycarbonate sheets and UV cured, followed by a thermal treatment to give a transparent coating with a good adhesion and abrasion resistance. The high transmission and the thermogravimetric behavior indicate the presence of a nanoscale hybrid composite, as is confirmed by SAXS and TEM measurements. In a Taber Abrasion Test, uncoated polycarbonate sheets exhibit a 48% decrease in light transmittance at 600 nm after 300 wear cycles, whereas the EBC80 hybrid coating system containing 9 wt% SiO₂ (EBC80/25Si) shows only 28% decrease in light transmittance. A maximal improvement of the abrasion resistance is achieved when 23 wt% SiO₂ is incorporated (EBC80/60Si, EBC284/60Si) with only 20% decrease in light transmittance. The abrasion resistance of glass is not yet encountered. For optimal results, it is essential that the rate of condensation of the silanol groups is sufficiently high to form a dense three-dimensional network.     

Polymers with double-decker and side-opened cage silsesquioxanes: Effects of cage structures on materials properties

Cage silsesquioxanes, also known as polyhedral oligomeric silsesquioxanes (POSS), serve as crucial building blocks in crafting precisely designed organic–inorganic hybrid materials, given that their well-defined silsesquioxane clusters can be adorned with organic substituents. While polymers with POSS in their main chains have been thoroughly examined, analyzing the correlation between cage structure and material properties in main-chain-type polymers remains challenging. This difficulty stems from the limited range of organic substituents on traditional POSS monomers, thereby precluding comparisons between polymers with unified substituents and different cage structures. In this study, we synthesized double-decker silsesquioxane (DDSQ) and side-opened POSS (SO-POSS) monomers, both featuring phenyl groups. Subsequent platinum-catalyzed hydrosilylation polymerization yielded main-chain-polymers. Both the cage and linker structures influence thermal stability and the glass transition temperature, while the hardness was primarily determined by the linker structure. This research is the first to elucidate the impact of cage structure on the material properties of main-chain-type POSS polymers.     

A design of shape memory networks of poly(ε‐caprolactone)s via POSS‐POSS interactions

In this contribution, we reported a design of shape memory networks of poly(ε‐caprolactone)s (PCLs) via POSS‐POSS interactions. First, a series of novel organic‐inorganic PCL stars with polyhedral oligomeric silsesquioxane (POSS) termini were synthesized via the combination of ring‐opening polymerization of ε‐caprolactone and the copper (I)‐catalyzed cycloaddition of alkynyl with azido groups. It was found that the organic‐inorganic PCL stars significantly displayed shape memory properties with about 100% of recovery. The morphological observation showed that in the organic‐inorganic PCL stars, the POSS cages at the ends of PCL chains were self‐organized into the spherical POSS microdomains with the size of 10 to 20 nm in diameter. The POSS microdomains behaved as the netpoints, resulting in the formation of physically crosslinked networks. The novel physically crosslinked networks endowed the organic‐inorganic nanocomposites with shape memory properties.     

SANS Study of Zirconia-Silica and Titania-Silica Hybrid Materials

New silica-based hybrid materials have been produced by the sol-gel process. Samples with compositions xMO₂·(100 – x)SiO₂ (with M = Zr, Ti and x 10 mol%) were prepared with polydimethylsiloxane, silanol terminated, with different molecular weights. In the present work the microstructure of samples prepared with a volume ratio organic/inorganic of 2/3 was investigated by Small Angle Neutron Scattering. The results show that a rather homogeneous hybrid material can be obtained. It is observed that the polymer is well distributed in the inorganic matrix and that the addition of MO₂ perturbs its local conformation when it has low molecular weight. The inorganic oxide network in the hybrid was found to develop as in pure inorganic dried gels.     

Electrode modified with toluidine blue-doped silica nanoparticles, and its use for enhanced amperometric sensing of hemoglobin

Three-dimensionally structured, silica based, organic–inorganic hybrid nanoparticles (NPs) were prepared by a simple and feasible water-in-oil (W/O) microemulsion method and a promising platform for bioelectrochemical analysis was obtained. The commonly used phenathiazine organic compound, toluidine blue (TB) was readily captured in the three-dimensional cage of the inorganic SiO₂ network, which was considered to serve as a protective “shell” toward the embedded TB. A TEM image indicated the size of the thus prepared TB-doped SiO₂ (TB@SiO₂) NPs was 21 ± 3 nm. UV–visible and IR spectroscopy confirmed successful formation of the organic–inorganic composite and possible interaction between TB and SiO₂, which favored enhanced stability of the hybrid. A sensitive amperometric sensor for hemoglobin (Hb) biomolecules based on TB@SiO₂ NPs conjugated with a biopolymer chitosan (CHIT) membrane was then developed. The surface of the silica NPs was highly biocompatible and the TB captured inside maintained its high electron-transfer efficiency. Dye leakage of TB from the TB@SiO₂ hybrid was proved to be minimal, owing to the inorganic SiO₂ network and the force of interaction between TB and SiO₂. The amperometric sensor had a detection limit of 2.5 × 10⁻⁹ mol L⁻¹ (S/N = 3) with a linear range from 5.0 × 10⁻⁹ to 3.0 × 10⁻⁶ mol L⁻¹ for Hb. When it was applied to determine the concentration of a clinical blood sample, satisfactory results were obtained which were in good agreement with those obtained by the standard method.     

Density functional theory study of interactions between carbon dioxide and functionalized polyhedral oligomeric silsesquioxanes

Polyhedral Oligomeric Silsesquioxanes (POSS) are cage‐structured inorganic–organic hybrid materials which can be used in various industrial applications. It is recently discovered that POSS structures with certain functional groups can be solubilized in supercritical CO₂ allowing their applications in environmentally benign supercritical processing of materials. In this theoretical study, nature and energetics of the interactions of octatrifluoropropyl POSS, octatrifluoromethyl POSS, and octamethyl POSS with CO₂ are investigated according to the principles of density functional theory (DFT) by use of Gaussian 09 software. Simulations show that CO₂‐octamethyl POSS pair has hydrogen bonding between the O atom of CO₂ and the H atom of the methyl group, and CO₂‐octatrifluoromethyl POSS pair has interactions between the C atom of CO₂ and the F atom of the trifluoromethyl group. CO₂‐octatrifluoropropyl POSS pair is found to have both interaction types. The octamethyl, the octatrifluoromethyl and the octatrifluoropropyl POSS structures have interaction energies of ?2.18 kcal/mol, ?3.10 kcal/mol, and ?3.77 kcal/mol, respectively. This shows that the presence of Lewis acid–Lewis base interaction between C and F instead of hydrogen bonding between O and H atoms enhances the interaction of the molecule with CO₂, while the presence of both interactions between the octatrifluoropropyl POSS‐CO₂ pair makes the intermolecular interaction even stronger.     

Hybrid nanocomposites for optical applications

Incorporating inorganic particles into conjugated polymer matrices is an area of current interest in the fields of optoelectronics and solar energy. The hybrid nanocomposites exhibit interesting physical properties thanks to good optical properties of polymers and to high carrier mobility of inorganic semiconductors. A judicious combination of organic/inorganic can therefore provide materials of low cost, ease processing, high stability, with specific electrical and optical properties.In the present study, we briefly review the composite materials that have been successfully utilized in the field of optoelectronics and photovoltaic conversion. We shall describe in particular a family of nanocomposites using polyhedral oligomeric silsesquioxanes (POSS) of general formula (RSiO_3/2)n where R is an organic group as a core. The composites are made by grafting functional polymer groups to the core, which allows the control of their optical properties. Such composites have high mechanical resistance and stability because of the special structure of the core. For illustration, we present a study of polyfluorene (PF)/POSS materials used as an active layer in organic light emitting diodes, with improved performance as compared to those using polymer only, and we discuss the role of the particles in the transport and emission processes in the devices studied.     

New insights on the thermal degradation pathways of neat poly(furfuryl alcohol) and poly(furfuryl alcohol)/SiO2 hybrid materials

Poly(furfuryl alcohol)/SiO₂ hybrid material was prepared and properties characterized in comparison with those of neat poly(furfuryl alcohol) (PFA) thermoset. A morphological study conducted by transmission electron microscopy (TEM) on the hybrid material reveals well-dispersed silica nanoclusters. Combination of micro- and submicro-structural organizations between the organic and inorganic networks generates new thermo-mechanical performances. A study of relaxation process by dynamic mechanical analysis (DMA) gives some evidence of the nanoconfinement effect on the hybrid network. These restrictions on the molecular mobility lead to an increase of thermal stability of the PFA/SiO₂ material compared to the unfilled matrix. Thermogravimetric analyses (TGAs) coupled with GC-MS have permitted us to highlight a multi-step degradation pathway and chain scission reactions are proposed based on identified VOCs.     

Organic–inorganic hybrid diblock copolymer composed of poly (ε‐caprolactone) and poly(MA POSS): Synthesis and its nanocomposites with epoxy resin

Organic–inorganic hybrid diblock copolymers composed of poly(ε‐caprolactone) and poly(MA POSS) [PCL‐b‐P(MA POSS)] were synthesized via reversible addition‐fragmentation chain transfer polymerization of 3‐methacryloxypropylheptaphenyl polyhedral oligomeric silsesquioxane (MA POSS) with dithiobenzoate‐terminated poly(ε‐caprolactone) as the macromolecular chain transfer agent. The dithiobenzoate‐terminated poly(ε‐caprolactone) (PCL‐CTA) was synthesized via the atom transfer radical reaction of 2‐bromopropionyl‐terminated PCL with bis(thiobenzoyl)disulfide in the presence of the complex of copper (I) bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine. The results of molecular weights and polydispersity indicate that the polymerizations were in a controlled fashion. The organic–inorganic diblock copolymer was incorporated into epoxy to afford the organic–inorganic nanocomposites. The nanostructures of the organic–inorganic composites were investigated by means of transmission electron microscopy and dynamic mechanical thermal analysis. Thermogravimetric analysis shows that the organic–inorganic nanocomposites displayed the increased yields of degradation residues compared to the control epoxy. In the organic–inorganic nanocomposites, the inorganic block [viz., P(MA POSS)] had a tendency to enrich at the surface of the materials and the dewettability of surface for the organic–inorganic nanocomposites were improved in terms of the measurement of surface contact angles. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Effect of Sintering Temperature on the Corrosion and Wear Behavior of Protective SiO2-Based Sol-Gel Coatings

Sol-gel hybrid organic-inorganic and inorganic SiO₂-based protective coatings with and without added 3 m glass particles were developed and tested for their corrosion and wear behavior of an stainless steel substrate (AISI316L). The corrosion resistance greatly increases by incorporating glass particles in the sols. The incorporation of particles in the coatings allows the synthesis of thicker crack-free coatings. On the other hand, the corrosion resistance increases for coatings with a higher organic content obtained at lower sintering temperature. These coatings are also highly stable in saline aqueous solutions. However, the wear resistance is badly affected by the hybrid character of the SiO₂ matrix. The optimum coating process in terms of corrosion and wear resistance, appears to be a hybrid system with a dense SiO₂ network achieved at intermediate sintering temperatures.     

Thermal and Surface Properties of Phenolic Nanocomposites Containing Octaphenol Polyhedral Oligomeric Silsesquioxane

Summary: We have synthesized a new polyhedral oligomeric silsesquioxane (POSS) containing eight phenol functional groups and copolymerized it with phenol and formaldehyde to form novolac‐type phenolic/POSS nanocomposites exhibiting high thermal stabilities and low surface energies. Our DSC results indicate that the glass transition temperature of these nanocomposites increased initially upon increasing their POSS content, but then decreased at POSS content above 10 wt.‐%, presumably because of the formation of relatively low molecular weight species and POSS aggregation as evidenced from MALDI‐TOF mass analyses. Our TGA analyses indicated that the 5‐wt.‐%‐mass‐loss temperatures (T_d) increased significantly upon increasing the POSS content because the incorporation of the POSS led to the formation of an inorganic protection layer on the nanocomposite's surface. XPS and contact angle data provided positive evidence to back up this hypothesis. In addition, contact angle measurements indicated a significant enhancement in surface hydrophobicity after increasing the POSS content.

Syntheses procedures of phenolic/OP‐POSS nanocomposites.