A theoretical study of the comonomer effect in the ethylene polymerization with zirconocene catalytic systems

The PM3(tm) semiempirical method has been used to optimize the structures for the reactants and transition states of the first and second ethylene insertion processes into zirconocene catalytic systems. The results obtained for these reactions are compared with calculations published in the literature performed at different ab-initio theoretical levels. The agreement between our calculations and those reported in the literature is satisfactory. Taking advantage of the reduced computational effort required in semiempirical calculations two additional processes related with the so-called comonomer effect were also studied: ethylene/1-hexene copolymerization, and chain termination reaction, both in the homopolymerization and in copolymerization of ethylene with 1-hexene comonomer. The calculated activation energies support some experimental findings such as the higher polymerization activities in the presence of comonomers and also the molecular weight reduction of the copolymers due to the more favorable β-elimination reactions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1157–1167, 1998     

Synthesis of bromine-functionalized polyolefins by scandium-catalyzed copolymerization of 10-bromo-1-decene with ethylene,propylene, and dienes

By use of a THF-containing trimethylsilylmethyl scandium catalyst system (C₅Me₄SiMe₃)Sc(CH₂SiMe₃)₂(THF)/[Ph₃C][B(C₆F₅)₄], the multi-component copolymerization of 10-bromo-1-decene (BrDC) with ethylene, propylene, and dienes has been achieved to afford a new family of bromine-functionalized polyolefins with controllable composition and high molecular weight. The copolymerization of BrDC with ethylene afforded the well-defined BrDC–ethylene copolymers with high BrDC incorporation (up to 12 mol%) and high molecular weight (M_w > 100 kg mol⁻¹). The terpolymerization of propylene, ethylene with BrDC afforded random ethylene–propylene–BrDC terpolymers with controllable bromine content (2 ~ 11 mol%), high molecular weight (M_w > 100 kg mol⁻¹) and low glass transition temperature (T_g = −51 °C ~ −67 °C). Moreover, the tetrapolymerization of ethylene, propylene, BrDC, and ethylidene norbornene or conjugated dienes such as isoprene and myrcene has been achieved for the first time to afford selectively the bromine-functionalized ethylene–propylene–diene rubbers containing various types of double bonds.     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.     

Synthesis of Mixed-ring Zirconocene Complexes Containing Alkenyl Group and Ethylene Polymerization Catalyzed with Them

Four new mixed‐ring zirconium completes, [CH₂ = CH(CH₂)_n ‐C₅H₄](RC₅H₄)ZrCl₂ [n = l, R = CH₃OCH₂CH₂(3); n = 2, R = CH₃OCH₂CH₂ (4); n = 2, R=Me₃Si (5); n = 2, R = allyl (6)], have been prepared by the reaction of CH₂ = CH(CH₂)_n C₅H₄ZrCl₃, DME[n = l (1); n = 2 (2)] with RC₅H₄Li. When activated with methylaluminoxane (MAO), the catalytic activities of the above complexes in ethylene polymerization were tested. Complexes 5 and 6 show high activities similar to Cp₂ZrCl₂. Introduction of methoxyethyl group into Cp‐ligand dramatically decreases the catalytic activities of complexes 3 and 4, which can be overcome by increasing the amount of MAO. For complex 5, the dependence of activity and molecular weight (Mη) on the Al/Zr ratio, the polymerization time (t_P), polymerization temperature (T_P) and the polymerization solvent volume (V) was investigated.     

Copolymerization of vinylcyclohexane with ethene and propene using zirconocene catalysts

Vinylcyclohexane (VCH) was copolymerized with ethene and propene using methylaluminoxane‐activated metallocene catalysts. The catalyst precursor for the ethene copolymerization was rac‐ethylenebis(indenyl)ZrCl₂ ( 1 ). Propene copolymerizations were further studied with C_s‐symmetric isopropylidene(cyclopentadienyl)(fluorenyl)ZrCl₂ ( 2 ), C₁‐symmetric ethylene(1‐indenyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 3 ), and “meso”‐dimethylsilyl[3‐benzylindenyl)(2‐methylbenz[e]indenyl)]ZrCl₂ ( 4 ). Catalyst 1 produced a random ethene–VCH copolymer with very high activity and moderate VCH incorporation. The highest comonomer content in the copolymer was 3.5 mol %. Catalysts 1 and 4 produced poly(propene‐co‐vinylcyclohexane) with moderate to good activities [up to 4900 and 15,400 kg of polymer/(mol of catalyst × h) for 1 and 4 , respectively] under similar reaction conditions but with fairly low comonomer contents (up to 1.0 and 2.0% for 1 and 4 , respectively). Catalysts 2 and 3 , both bearing a fluorenyl moiety, gave propene–VCH copolymers with only negligible amounts of the comonomer. The homopolymerization of VCH was performed with 1 as a reference, and low‐molar‐mass isotactic polyvinylcyclohexane with a low activity was obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6569–6574, 2006     

Copolymerization of ethylene with 1‐hexene over metallocene catalyst supported on complex of magnesium chloride with tetrahydrofuran

The study of ethylene/1‐hexene copolymerization with the zirconocene catalyst, bis(cyclopentadienyl)zirconium dichloride (Cp₂ZrCl₂)/methylaluminoxane (MAO), anchored on a MgCl₂(THF)₂ support was carried out. The influence of 1‐hexene concentration in the feed on catalyst productivity and comonomer reactivity as well as other properties was investigated. Additionally, the effect of support modification by the organoaluminum compounds [(MAO, trimethlaluminum (AlMe₃), or diethylaluminum chloride (Et₂AlCl)] on the behavior of the MgCl₂(THF)₂/Cp₂ZrCl₂/MAO catalyst in the copolymerization process and on the properties of the copolymers was explored. Immobilization of the Cp₂ZrCl₂ compound on the complex magnesium support MgCl₂(THF)₂ resulted in an effective system for the copolymerization of ethylene with 1‐hexene. The modification of the support as well as the kind of organoaluminum compound used as a modifier influenced the activity of the examined catalyst system. Additionally, the profitable influence of immobilization of the homogeneous catalyst as well as modification of the support applied on the molecular weight and molecular weight distribution of the copolymers was established. Finally, with the successive self‐nucleation/annealing procedure, the copolymers obtained over both homogeneous and heterogeneous metallocene catalysts were heterogeneous with respect to their chemical composition. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2512–2519, 2004     

Cyclocopolymerization of 1,6-heptadiene with ethylene by half-sandwich scandium catalysts

<正>~~     

Kaminsky型催化剂催化乙烯环齐聚反应的研究

研究发现Cp~2ZrL~2(L=Cl,Me,OC~6H~4-p-Me)/EAO(乙基铝氧烷)可同步催化乙烯齐聚-环化反应,不仅给出链状烯烃,而且生成环状剂聚物－－亚甲基环戊烷。环状齐聚物的选择性取决于主催化剂的结构和浓度,反应介质,预反应温度和反应温度,反应时间,Al/Zr比及烷基铝水解程度等因素,加入碱性第三组分对催化活性和选择性亦有一定影响。在优化反应条件下,亚甲基环戊烷的选择性达到37%。     

Synthesis and photophysical properties of polyethylene containing pyrenyl units in the side chain

Copolymerization of ethylene and diallyl‐bis(pyren‐1‐yl)‐silane (APyS) was investigated with zirconocene catalysts, rac‐ethylenebis(indenyl)zirconium dichloride ( 1 ) and diphenylmethylene(cyclopentadienyl)(9‐fluorenyl)zirconium dichloride ( 2 ), using methylaluminoxane as a cocatalyst. APyS was copolymerized via both 1,2‐insertion and cyclization insertion, and cyclization selectivity, ratio of cyclized insertion unit, of APyS in the copolymers obtained with Catalyst 1 was higher than that obtained with Catalyst 2 . Catalyst 2 showed a higher reactivity for APyS than Catalyst 1 . Photophysical properties of the copolymer were investigated by UV–vis and photoluminescence (PL) spectroscopy, and absorption and fluorescence derived from pyrenyl groups were detected in the copolymers. Chloroform solution of the copolymer showed emission derived from both monomer and eximer of pyrenyl units. Only the emission derived from eximer of pyrenyl units was observed in the cast film. The polarized PL spectrum of an oriented film showed anisotropy, and the polarization excitation parallel to the drawing direction showed high fluorescence intensity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of Pd catalysts based on a nonbornene−CO copolymer and their properties in the carbomethoxylation of propylene

It was found that carboxylation of norbornene (nbn) in the presence of the PdCl₂−PPh₃−HCl catalytic system is accompanied by alternating copolymerization ofnbn with carbon monoxide to form norbornanecarboxylic acid (yield ∼20%) and anbn-CO copolymer (yield ∼80%,M _w=1600,M _w/M _n=1.6). The Pd^II salt of poly(norbornaneketone)carboxylic acid is a highly active catalyst for the carbomethoxylation of propylene. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 368–370, February, 1998.     

茂锆载体催化剂下的乙烯／辛烯共聚及聚合物的^13C NMR研究

茂锆载体催化剂下的乙烯／辛烯共聚及聚合物的~（１３）ＣＮＭＲ研究刘胜生，于广谦，黄葆同（中国科学院长春应用化学研究所长春１３００２２）关键词茂锆载体催化剂，共聚，序列分布，~（１３）ＣＮＭＲ由于茂锆催化剂具有高活性，单一活性中心等特点［１，２］，并且能...     

Effects of ethylene polymerization conditions on the activity of SiO2-supported zirconocene and on polymer properties

The effects of polymerization conditions were evaluated on the production of polyethylene by silica-supported (n-BuCp)₂ZrCl₂ grafted under optimized conditions and cocatalyzed by methylaluminoxane (MAO). The Al : Zr molar ratio, reaction temperature, monomer pressure, and the age and concentration of the catalyst were systematically varied. Most reactions were performed in toluene. Hexane, with the addition of triisobutilaluminum (TIBA) to MAO, was also tested as a polymerization solvent for both homogeneous and heterogeneous catalyst systems. Polymerization reactions in hexane showed their highest activities with MAO : TIBA ratios of 3 : 1 and 1 : 1 for the homogeneous and supported systems, respectively. Catalyst activity increased continuously as Al : Zr molar ratios increased from 0 to 2000, and remained constant up to 5000. The highest activity was observed at 333 K. High monomer pressures (≈ 4 atm) appeared to stabilize active species during polymerization, producing polyethylenes with high molecular weight (≈ 3 × 10⁵ g mol⁻¹). Catalyst concentration had no significant effect on polymerization activity or polymer properties. Catalyst aging under inert atmosphere was evaluated over 6 months; a pronounced reduction in catalyst activity [from 20 to 13 × 10⁵ g PE (mol Zr h)⁻¹] was observed only after the first two days following preparation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1987–1996, 1999     

Copolymerization of propylene with 1‐octene catalyzed by rac‐Me2Si(2,4,6‐Me3‐Ind)2ZrCl2/methyl aluminoxane

The copolymerization of propylene with 1‐octene was carried out with rac‐dimethylsilylbis(2,4,6‐trimethylindenyl)zirconium dichloride as a catalyst activated by methylaluminoxane (MAO) and an MAO/triisobutylaluminum mixture. The copolymerization conditions, including the polymerization temperature, Al/Zr molar ratio, and 1‐octene concentration in the feed, significantly influenced the catalyst activity, 1‐octene incorporation, polymer molecular weight, and melting temperature. The addition of 1‐octene to the polymerization system caused a decrease in the activity, whereas the melting temperature and intrinsic viscosity of the polymer increased. The microstructure of the propylene–1‐octene copolymer was characterized by ¹³C NMR, and the reactivity ratios of the copolymerization were estimated from the dyad distribution of the monomer sequences. The amount of regioirregular structures arising from 2,1‐ and 1,3‐misinserted propylene decreased as the 1‐octene content increased. The influence of the propagation chain on the polymerization mechanism is proposed to be the main reason for the changes in the reactivity ratios and regioirregularity with the polymerization conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4299–4307, 2000     

Copolymerization of isoprene with ethylene catalyzed by cationic half‐sandwich fluorenyl scandium catalysts

Isoprene polymerization and copolymerization with ethylene can be carried out by using cationic half‐sandwich fluorenyl scandium catalysts in situ generated from half‐sandwich fluorenyl scandium dialkyl complexes Flu'Sc(CH₂SiMe₃)₂(THF)_n, activator, and AlⁱBu₃ under mild conditions. In the isoprene polymerization, all of these cationic half‐sandwich fluorenyl scandium catalysts exhibit high activities (up to 1.89 × 10⁷ g/mol_Sc h) and mainly cis?1,4 selectivities (up to 93%) under similar conditions. In contrast, these catalysts showed different activities and regio‐/stereoselectivities being significantly dependent on the substituents of the fluorenyl ligands in the copolymerization of isoprene with ethylene under an atmosphere of ethylene (1 atm) at room temperature, affording the random copolymers with a wide range of cis?1,4‐isoprene contents (IP content: 64 ? 97%, cis?1,4‐IP units: 65 ? 79%) or almost alternating copolymers containing mainly 3,4‐IP‐alt‐E or/and cis?1,4‐IP‐alt‐E sequences. Moreover, novel high performance polymers have been prepared via selective epoxidation of the vinyl groups of the 1,4‐isoprene units in the IP‐E copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2898–2907     

Synthesis and characterization of titanium complexes bearing sulfoxide groups and their catalytic behaviors in ethylene homo- and copolymerization

<正>1 Experimental section 1.1 General information All manipulations of air- and/or moisture-sensitive compounds were performed under nitrogen atmosphere using standard Schlenk techniques. 1H NMR and 13 C NMR spectra were recorded on a Varian XL-300 MHz spectrometer with TMS as the internal standard. Mass spectra were obtained using a HP5959 A spectrometer. IR spectra were recorded using a Nicolet AV-360 spectrometer. Elemental analysis was performed by the Analytical Laboratory of Shanghai Institute of Organic Chemistry(CAS). Mn, Mw, and Mw/Mn values of polymers were determined with a Waters Alliance GPC 2000 series at     

Synthesis of phenoxy-ester titanium complexes with different R1 and R2 substituents and their catalytic properties

A series of phenoxy-ester ligated titanium complexes with different R₁ and R₂ substituents was synthesized. The structures of 3-silylsubstituted salicylate ligands and their corresponding titanium complexes were characterized using infrared spectrometer, nuclear magnetic resonance spectroscopy and mass spectrometer. The novel [O, O] bidentate coordination compounds with different R₁ and R₂ substituents were then used as the catalysts for ethylene-propylene copolymerization together with ⁱBu₃A1/Ph₃CB(C₆F₅)₄ as the cocatalysts in toluene. The correlations between R₁, R₂ substituents of titanium complexes and polymerization activity, polymer molecular weight were studied. The catalytic activity of titanium complex was observed to decline with increasing the size of R₂, whereas the copolymers with higher molecular weight were synthesized using the titanium complex with larger R₁ substituent. The ethylene propylene copolymers prepared using different titanium complex catalysts were all random copolymers.     

Copolymerization of ethylene and norbornene using cyclopentadienylzirconium trichloride activated by isobutyl‐modified methylaluminoxane

The copolymerization of ethylene (E) and norbornene (NB) was investigated using the commercially available and inexpensive catalyst system, cyclopentadienylzirconium trichloride (CpZrCl₃)/isobutyl‐modified methylaluminoxane (MMAO), at a moderate polymerization temperature in toluene. For the CpZrCl₃ catalyst system activated by aluminoxane with a 40 mol % methyl group and a 60 mol % isobutyl group (MMAO), the quantities of the charged NB and the polymerization temperature significantly affected the molecular weights, polydispersities, and NB contents of the obtained copolymers and the copolymerization activities in all the experiments. As the charged NB increased and thereby the NB/E molar ratio increased, the NB content in the copolymer increased and reached a maximum value of 71 mol %. The CpZrCl₃/MMAO ([Al]/[Zr] = 1000) catalyst system with the [NB] of 2.77 mol L^?1 and ethylene of 0.70 MPa at 50 °C showed the highest activity of 1690 kg mol_Zr^?1 h^?1 and molecular weight of 21,100 g mol^?1. The ¹³C NMR analysis showed that the CpZrCl₃/MMAO catalyst system produced the E‐NB random copolymer with a number of NB homosequences such as the NN dyad and NNN triad. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7411–7418, 2008     

Homogeneous binary zirconocenium catalysts for propylene polymerization. II. Mixtures of isospecific and syndiospecific zirconocene systems

Isotactic polypropylene (i-PP) and syndiotactic polypropylene (s-PP) obtained with single-site C₂- and C_s-symmetric zirconocenes, respectively, activated with triphenyl carbenium tetrakis(pentafluorophenyl)borate (3) are immiscible with one another. Physical mixture of the two PPs is macrophase separated and crystallizes very slowly as is characteristic of s-PP. A solution of C₂- and C_s-symmetric zirconocenes with 3 also produces an incompatible mixture of i-PP and s-PP. However, in the presence of an excess of a crossover agent such as triisobutylaluminum (TIBA), a new polymeric material is obtained that exhibits lower T_m and ΔH_f than either of the two homosteric polymers and a much faster rate of crystallization than that of s-PP or its physical mixture with i-PP. Thermal annealing of this product markedly reduces the relative amount of crystalline phase compared to the amorphous phase and atomic force microscopy finds only microphase separation but not macroscopic phase separation. Fractionation and ¹³C-NMR showed the material to contain not only the homosteric i-PP and s-PP but also a stereoblock PP (i-PP-b-s-PP). The stereoblock fraction acts as a compatibilizing agent; it probably is produced by the exchange of propagating polymer chains between the syndiospecific and the isospecific sites assisted by the crossover agent. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2439–2445, 1999     

ESR studies on oxidation state of titanocene and zirconocene catalysts

An on‐line electron spin resonance (ESR) technique was applied to investigate the oxidation states of the metallocene catalysts CpTiCl₃, CpZrCl₃, Cp₂TiCl₂, and Cp₂ZrCl₂. These metallocene catalysts were activated by modified methylaluminoxane (MMAO). It was found that the titanocene catalysts (CpTiCl₃ and Cp₂TiCl₂) were readily reduced to the trivalent state while the zirconocene catalysts (CpZrCl₃ and Cp₂ZrCl₂) were quite stable with respect to reduction. The concentrations of the trivalent species Ti(III) and Zr(III) showed linear relationships with the concentrations of metallocene catalyst precursors. However, their slopes were always smaller than unity indicating the existence of bimetallic interactions of the active sites. The ESR detectable Ti(III) and Zr(III) concentrations initially increased with the MAO/catalyst ratio and then leveled off after an 800–1000 Al/catalyst molar ratio. The deactivation processes were followed as a function of aging time over a range of temperature (25–100°C). The decay curves strongly depended on aging temperature with higher temperature giving faster decay rates. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1465–1472, 1999