Synthesis and investigation of polyphenyldimethylsiloxane block copolymers with bimodal chain length distribution of oligodimethylsiloxane blocks

Siloxane block copolymers containing linear dimethylsiloxane (DMS) and cyclolinear phenylsilsesquioxane blocks were synthesized. A peculiarity of the copolymers is a bimodal distribution of linear DMS blocks in the polymer chain. The results of X-ray diffraction. thermomechanical, and DSC studies of bimodal block copolymers indicate a higher degree of microphase separation of the blocks as compared to unimodal block copolymers. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1542–1546, September, 2000.     

Synthesis of functional block copolymers and terpolymers containing polyglycidyl methacrylate blocks

Here, the synthesis of triblock terpolymers using tert‐butyl acrylate, glycidyl methacrylate, and methyl methacrylate was studied in detail using atom transfer radical polymerization. Those polymers are promising candidates for irreversible linked microstructured layers on surfaces. The experiments showed that the polymerization has to be started with the acrylate and can be extended with the methacrylates. The first two steps can be done in a one pot procedure employing the method of halogen exchange. With optimized reaction conditions in the last step, the obtained terpolymers show narrow molecular weight distributions and the polymerization process is well controlled. Conducting the synthesis in the opposite direction mostly a nonuniform product was obtained as the GPC analysis showed. Further characterization was done with ¹H NMR spectroscopy, thermogravimetric analysis, and differential scanning calorimetry, the latter showing different glass points for the single blocks in the terpolymers if they are not too short. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 675–684     

New polysaccharide-g-polyacrylonitrile copolymers: synthesis and thermal characterization

Various natural and modified polysaccharides (i.e. arabic gum, tragacanth gum, xanthan gum, sodium alginate, chitosan, sodium carboxymethyl cellulose, hydroxyethyl cellulose, methyl cellulose) were modified using ceric-initiated graft polymerization of acrylonitrile under inert atmosphere. Grafting was confirmed using spectral (FT-IR) proofs. The grafting parameters were determined by conventional methods. Thermal characteristics of the homopolymer-free copolymers were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) under nitrogen atmosphere. The major thermal transitions as well as the activation energy of the major decomposition stages were investigated. The polyacrylonitrile (PAN)-grafted polysaccharides were recognized to be thermally stable more than the corresponding non-grafted substrates, although they begin to decompose at relatively lower temperatures than the non-grafted counterparts. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of thermal history on the melting behavior and the crystal-crystal transitions of tetrafluoroethylene-perfluoroalkylvinylether copolymers

By differential scanning calorimetry (DSC), the effect of thermal treatments on the melting of tetrafluoroethylene-perfluoroalkylvinylether copolymers (PFA) with different contents of perfluoromethylvinylether as a comonomer has been investigated. Two melting peaks can be identified for all copolymers, whose presence, value, and extent depend upon the thermal treatments. The higher temperature one, scarcely influenced by the crystallization conditions (i.e., cooling rate and annealing), can be attributed to more perfect crystals present in the original samples. The lower temperature one is produced only by annealing (annealing peak) and can be interpreted as resulting from much poorer crystals grown among the larger ones. For the copolymer with the lowest content of comonomer, the effect of thermal treatments on the low-temperature (crystal-crystal) transitions has also been studied. The rejection of the counits from the crystals, at least in equilibrium conditions, is confirmed. © 1996 John Wiley & Sons, Inc.     

Probing the interfacial region of microphase‐separated block copolymers by differential scanning calorimetry

A region of broad nonlinear curvature is observed in DSC traces of ABA copolymers during temperature sweeps between the glass transition temperatures of the two principal microphases. This curvature is attributed to a smoothly varying composition profile through the interfacial region lying between microphases. The shape of the DSC curve is proposed to be a fingerprint for a given profile. This curvature is, however, shown to be a possible source of uncertainty in precise evaluation of T_g for the microphases and the reported enhanced breadth of these transitions. In addition, microphase separation temperatures are readily identifiable from DSC traces, and their values correspond well to the predictions of Leary‐Williams theory. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 267–274, 1999     

From supramolecular block copolymers to advanced nano-objects

The formation of asymmetric bis-complexes, based on terpyridine ligands and ruthenium ions, is described as a powerful tool for the self-assembly of polymer blocks end-functionalized with terpyridine units. This is illustrated in this contribution for the synthesis of amphiphilic metallo-supramolecular block copolymers, which are further used to produce aqueous micelles. Finally, the reversibility of the supramolecular bond opens new avenues for the preparation and manipulation of these nano-objects.     

Synthesis and characterization of postsulfonated poly(arylene ether sulfone) diblock copolymers for proton exchange membranes

Sulfonated poly(arylene ether sulfone) diblock copolymers were studied through the postsulfonation process. Two kinds of hydrophobic oligomers with a molecular weight of 20 kDa were prepared in advance as block sequences and then coupled together to obtain diblock copolymers. One oligomer was synthesized from bis(4‐hydroxyphenyl) sulfone (BHPS) and 4,4′‐difluorodiphenyl sulfone (DFDPS), which was thought to be incapable of postsulfonation. The other oligomer was synthesized from hydroquinone (HQ) and 4,4′‐dichlorodiphenyl sulfone (DCDPS), which successfully proceeded to a hydrophilic sequence as a result of sulfonation onto the HQ moiety after the coupling reaction. Consequently, a diblock copolymer with high molecular weight was obtained; although its intrinsic viscosity was too low to form a tough membrane because of its high rigidity and high crystallinity. Therefore, the use of decafluorobiphenyl (10F) as a termination reagent was investigated with the aim of achieving higher coupling reactivity and a kinky property. As a result, a sulfonated diblock copolymer was successfully obtained with sufficient molecular weight and intrinsic viscosity to form the membrane, as well as with adequate thermal properties. It was observed that proton conductivity, water uptake, and the water diffusion coefficient increased with higher ion exchange capacity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 700–712, 2009     

Thermal characterization of tetrafluoroethylene-perfluoroalkylvinylether copolymers: Melting behavior and low-temperature transitions

Differential scanning calorimetry has been used to study the melting and the low-temperature transitions of tetrafluoroethylene-perfluoroalkylvinylether copolymers (PFA). Melting is similar to that of PTFE in that it is subject to superheating, moreover the melt-crystallized samples show temperatures and heats of fusion lower than the native ones. At temperatures lower than room temperature, crystal-crystal transitions are observed for copolymers containing 2 mol % of perfluoromethyl-, perfluoroethyl-, and perfluoro-n-propylvinylether. In the case of perfluoromethylvinylether as a comonomer, low-temperature transitions are present only up to a content of 4 mol %. The effect on melting and low-temperature transitions of both the comonomer content and of the type of side groups has been investigated. The temperatures and heats of transitions show the expected dependence as a function of the comonomer concentration and have been found to be independent on the chemical nature of the side group. © 1994 John Wiley & Sons, Inc.     

Synthesis and morphology investigations of a novel alkyne‐functionalized diblock copolymer

We reported the synthesis and morphology of a novel alkyne‐functionalized diblock copolymer (di‐BCP) poly(methyl methacrylate‐random‐propargyl methacrylate)‐block‐poly(4‐bromostyrene). The di‐BCPs were synthesized by atom transfer radical polymerization and postpolymerization deprotection, with good control over molecular weight and polydispersity index. Microphase separation in bulk di‐BCPs was confirmed by thermal analysis, small‐angle X‐ray scattering, and transmission electron microscopy. Microphase‐separated morphologies were also observed in thin films, and the orientation of the microdomains can be conveniently controlled by annealing under different solvents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis of poly(vinyl laurate)‐b‐poly(vinyl stearate) diblock copolymers by cobalt‐mediated radical polymerization in solution

Poly(vinyl laurate) (PVL) and poly(vinyl stearate) (PVS) were synthesized by means of cobalt‐mediated radical polymerization (CMRP). Cobalt(II) diacetylacetonate (Co(acac)₂) was demonstrated to control the radical polymerization of these monomers in solution. Molecular weights up to 15,000 g·mol^?1 were obtained with reasonably low polydispersity indices (PDI < 1.3). The efficiency of the redox initiator [lauroyle peroxide (LPO)/citric acid (CA)] was found to be low (around 10%) as already reported for vinyl acetate. The solvent and temperature were found to have a very weak influence on the initiator efficiency. It appeared that CA played no role in the initiation process that only involved a redox reaction between LPO and Co(acac)₂. PVL‐b‐PVS diblock copolymers could be synthesized using two strategies: (1) Sequential addition, that is, addition of the second monomer (VS) at high conversion of the first one (VL). (2) Macroinitiator technique, that is, isolation of a PVL macroinitiator then polymerization of VS from this cobalt functionalized macroinitiator. Both techniques allowed the synthesis of diblock copolymers with molar masses around 25,000 g·mol^?1 and PDI lower than 1.4. The resulting materials were characterized by DSC, revealing that both blocks exhibit side‐chain crystallinity and phase segregate in the bulk. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of well‐defined optically active methacrylic diblock copolymers

A new, simple, and cost‐effective approach toward the development of well‐defined optically active diblock copolymers based on methacrylate monomers is described for the first time. Starting from the low‐cost optically active (S)‐(?)‐2‐methyl‐1‐butanol, a new optically active methacrylic monomer, namely, (S)‐(+)‐2‐methyl‐1‐butyl methacrylate [(S)‐(+)‐MBuMA], was synthesized. Reversible addition fragmentation chain transfer polymerization was then used for preparing well‐defined poly[(S)‐(+)‐MBuMA] homopolymers and water‐soluble diblock copolymers based on [(S)‐(+)‐MBuMA] and the hydrophilic and ionizable monomer 2‐(dimethyl amino)ethyl methacrylate (DMAEMA). The respective homopolymers and diblock copolymers were characterized in terms of their molecular weights, polydispersity indices, and compositions by size exclusion chromatography and ¹H NMR spectroscopy. Polarimetry measurements were used to determine the specific optical rotations of these systems. The structural and compositional characteristics of micellar nanostructures possessing an optically active core generated by p((S)‐(+)‐MBuMA)‐b‐p(DMAEMA) chains characterized by predetermined molecular characteristics may be easily tuned to match biological constructs. Consequently, the aggregation behavior of the p[(S)‐(+)‐MBuMA]‐b‐p[DMAEMA] diblock copolymers was investigated in aqueous media by means of dynamic light scattering and atomic force microscopy, which revealed the formation of micelles in neutral and acidified aqueous solutions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and bulk characterization of new P(CB‐b‐S) diblock copolymers

Strongly asymmetric chlorinated polybutadiene‐b‐polystyrene, [P((CB)_x‐b‐(PS)_y)] diblock copolymers with increasing x/(x + y) ratios (up to 5.2 mol %) have been synthesized by the selective chlorination of the polybutadiene (PB) block in solution. Chlorination has been performed in anhydrous dichloromethane added with an antioxidant [2,2′‐methylenebis‐(6‐tert‐butyl‐4‐methyl‐phenol)], at −50°C, under a continuous Ar flow and in the dark. Under the optimized experimental conditions, the PB chlorination is not complete, but the PS block is left unmodified. Even in the presence of a large chlorine excess (Cl₂/butene unit molar ratio of 2.5), the experimental degree of chlorination of homo PB does not exceed 85%. The chlorinated copolymers have been characterized by ¹H‐NMR, IR spectroscopy, size‐exclusion chromatography, and elemental analysis. The chlorinated copolymers have also been studied by DSC and SAXS after annealing at 150°C. Although at this temperature the parent homopolymers are immiscible, no microphase separation has been observed for the block copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 233–244, 1999     

Synthesis and characterization of conjugated triblock copolymers

A series of conjugated triblock copolymers containing hole-transporting polycarbazole segments, electron-transporting polyoxadiazole segments, and blue-light-emitting polyfluorene segments were prepared with a two-step palladium-catalyzed Suzuki polycondensation (SPC). First dibromo-terminated polymer precursors (polyfluorenes and polyoxadiazoles) were synthesized as the central buildingblocks. Then, the dibromo-terminated polymer precursors were further polymerized with AB-type monomers [2-bromo-7-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9-octylcarbazole, 3-bromo-6-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9-octylcarbazole, and 2-bromo-7-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9,9-dioctylfluorene] to achieve the target triblock copolymers under SPC conditions. The formation of the triblock copolymers was confirmed by gel permeation chromatography and NMR spectroscopy. The triblock copolymers exhibited good thermal stability. An investigation of the photophysical properties indicated that efficient, photoinduced through-bond energy transfer occurred in such triblock copolymer systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2410–2424, 2007     

Antifreeze Properties of Polyglycidol Block Copolymers

In this paper, we describe a new biomimetic approach to the synthesis of block copolymers with antifreeze properties. Our approach focuses on the design of block copolymers that mimic the structure and functionality of antifreeze proteins. Hyperbranched copolymers containing poly(ethylene oxide)‐polyethyleneimine blocks and polyglycidol side chains were synthesized and their antifreeze properties were studied. It is shown that these block copolymers can lower the freezing point of water up to 0.8 °C at a relatively low concentration (1 mg · mL⁻¹). From DSC measurements it is proven that polyglycidol block copolymers slow down the crystallization kinetics of ice and lead to changes in the ice crystal morphology, as observed by cryo‐optical microscopy.

     

Evaluation of methoxy polyethylene glycol‐polylactide diblock copolymers as additive in hypromellose film coating

This paper deals with a new application of diblock methoxy polyethylene glycol‐polylactide block copolymers, a class of synthetic biomaterials largely studied in the pharmaceutical and biomedical fields owing to their favorable properties such as biocompatibility, biodegradability, low immunogenicity, and good mechanical properties. In this work, these materials were evaluated as additives for gastro‐soluble pharmaceutical coating aimed to reduce film stiffness and water permeability. Two copolymers with different polylactide chain lengths were synthesized and characterized in term of molecular weight and solid‐state properties. A series of free films with different hypromellose/copolymers ratio were prepared and characterized in terms of appearance, components miscibility, plasticity, and water vapor permeability. The obtained results demonstrate that copolymers effectively influence hypromellose film properties according to their concentration and molecular weight. Specifically, the addition of the copolymer with a molecular weight of 6.5 kDa in a ratio hypromellose:polymer 5:1, allowed to obtain films with good appearance, improved plasticization, and water permeability properties. For higher molecular weight, copolymer or different ratios was not possible to observe the improvement of all the properties at the same time. The results also make possible to define the critical features to improve in order to use block copolymers as additive in hypromellose film coating. The availability of new water‐soluble additives able to work as plasticizer and moisture sealer in polymeric films represents an important progress not only in the field of pharmaceutical coating but also in that of food coatings, as for example in the formulation of edible films. Copyright © 2013 John Wiley & Sons, Ltd.