Iron(II)‐ and Cobalt(II) Complexes with Tridentate Bis(imino)pyridine Nitrogen Ligands Bearing Chiral Bulky Aliphatic and Aromatic Substituents: Crystal Structure of [CoCl2{2, 6‐bis[R‐(+)‐(bornylimino)methyl]pyridine}]

Iron(II) and cobalt(II) complexes ( 7 ‐ 15 ) based on new aldimine 2, 6‐bis[(imino)methyl]pyridine ( 1 , 2 , 4 , 6 ) and ketimine (2, 6‐bis[(imino)ethyl]pyridine ( 3 , 5 ) ligands with bulky chiral aliphatic or aromatic terminal groups have been prepared and characterized by ¹H NMR, ¹³C NMR, IR‐, mass spectroscopy (EI), and elemental analysis. The complex [CoCl₂(BBoMP)]·¹/₂ CHCl₃ ( 13 ) (BBoMP: 2, 6‐bis{(R‐(+)‐(bornylimino)‐methyl}pyridine) crystallizes in monoclinic space group P2₁ with cell dimensions: a = 7.6603(11) Å, b = 28.3153(14) Å, c = 13.537(2) Å, V = 2908.1(6) ų, Z = 4. The coordination sphere around Co is distorted trigonal bipyramidal.     

Cobalt(II) and iron(III) complexes with 2-substituted benzimidazole derivatives

Summary FeCl₃ and the primary amines 2-aminobenzimidazole (abi) and 2(2-aminophenyl)benzimidazole (apbi) give complexes for which spectroscopic and magnetic data suggest a pentacoordinate [FeCl₄].The reactions of complexes of primary amines of CoCl₂ and FeCl₃ with the carbonyl compounds acetylacetone (Hacac) and pyridylcarbaldehyde (pyc) yield complexes which contain the Schiff bases from the condensation of the amines and the carbonyl groups.Analytical data indicate formulae [CoCl₂(abiacac)₂], [CoCl₂(abipyc)], [FeCl₃(abiacac)], [FeCl₃(abipyc)₂] and [FeCl₃(apbipyc)] for the complexes. The cobalt(II) complexes are pseudo-tetrahedral, while the iron complexes are tetra-, penta-, or hexa-coordinate, as deduced from spectroscopic and magnetic measurements.     

Molybdenum(0) and Tungsten(0) Complexes with P,S and P,Se Monooxidized Bis(phosphanyl)amine Ligands

Reactions of monooxidized thioyl and selenoyl bis(phosphanyl)amine ligands C₁₀H₇‐1‐N(P(E)Ph₂)(PPh₂) [E = S ( 1 ), Se ( 2 )] with Mo(CO)₄(pip)₂ and W(CO)₄(cod) afforded the complexes [M(CO)₄{ 1 ‐κ²P,S}] [M = Mo ( 3 ), W ( 4 )] and [M(CO)₄{ 2 ‐κ²P,Se}] [M = Mo ( 5 ), W ( 6 )]. Complexes 3 – 6 were characterized by multinuclear NMR (¹H, ¹³C, ³¹P, and ⁷⁷Se NMR) and IR spectroscopy. Crystal‐structure determinations were carried out on 3 , 5 , and 6 , which represent the first examples of structurally characterized complexes of such ligands with group‐6 metal carbonyls.     

Tripodale Bis(2,6‐iminophosphoranyl)pyridin‐Liganden: Eisen‐ und Cobalt‐Komplexe mit Potential in der Ethen‐Polymerisation

Tripodal Bis(2,6‐iminophosphoranyl)pyridine Ligands: Iron and Cobalt Complexes with a Potential in Ethene Polymerisation By Staudinger Reaction of bis‐2,6‐diphenylphosphanyl‐pyridine with aryl‐, alkyl‐ and silylazides tripodal ligands L = 2,6‐(Ph₂P=NR)₂C₅H₃N (R = Ph 1 a , Mes 1 b , Ad  1 c , SiMe₃ 1 d ) are synthesized. The reaction of ligand 1 b  with equimolar amounts of [CoCl₂(THF)₂] and [FeCl₂(THF)_1.5] in THF does not lead to the expected neutral complexes [(k³‐L)MCl₂] but to coordination compounds of the composition L₂(CoCl₂)₃ ( 2 a ) und L(FeCl₂)₂ ( 3 ). By using acetonitrile as solvent or by crystallisation of 2 a from hot acetonitrile the cationic complex [(k³‐L)CoCl(MeCN)]Cl ( 2 b ) is formed as a second product. The molecular structure 2 b has been characterized by an X‐ray single crystal structure analysis (triclinic, P1, Z = 2, a = 1299.8(1), b = 1488.8(2), c = 1674.2(2) pm, α = 82.911(13)°, β = 76.715(12)°, γ = 72.758(11)°). A preliminary test with 3 shows, that coordination compounds of the ligand system introduced here have potential as catalysts in methyl alumoxane mediated ethene polymerisation.     

Coordination Chemistry of Acrylamide. 6 Synthesis and Coordination Compounds of N‐Pyrazolylpropanamide – a Versatile Acrylamide‐derived Ligand

The syntheses, spectroscopy and single crystal X‐ray structures of the multifunctional acrylamide‐derived ligand N‐pyrazolylpropanamide (= L) ( 1 ), and its complexes [L₂CuCl₂] ( 2 ) and [L₄Co₃Cl₆] ( 3 ) with copper(II) and cobalt(II) chlorides, respectively, are described. The ligand 1 is easily obtained in one step by the reaction of pyrazole with acrylamide in a 1:1 molar ratio in the presence of trimethylbenzylammonium hydroxide as a basic catalyst. The reaction of CuCl₂·2H₂O with 1 in a 1:2 metal salt:ligand molar ratio in ethanol/‐triethylorthoformate solution gave coordination compound 2 . The crystal structure of 2 contains two seven‐membered chelate rings formed by two nitrogen atoms of the pyrazolyl groups and two weakly coordinated carbonyl oxygen atoms of the substituted amide moieties. Two chloride ions in the axial positions complete a distorted octahedral coordination environment around the Cu^II atom. The reaction of CoCl₂·6H₂O with 1 in a 1:2 metal salt:ligand molar ratio afforded the unusual zwitterionic complex 3 . The crystal structure of 3 contains a central cobalt atom in an octahedral coordination surrounded by four ligands in which two of them act as chelate ligands and the other two, coordinated via the carbonyl oxygen atoms of the amide moieties to this metal center, act as bridging ligands bonded to two CoCl₃^? units.     

Synthese,Komplexbildung und Kristallstrukturen von Cyclotriphosphazenen mit Pyridylalkylaminogruppen

Synthesis, Complex Formation and Crystal Structures of Cyclotriphosphazenes with Pyridylalkylamino Groups A variety of cyclotriphosphazenes with different numbers and types of functional pyridylalkylamino groups were synthesized by reactions of chlorophosphazenes with aminoalkylpyridine derivatives and completely characterized. The molecular structures of one multifunctional N‐donor ligand, N₃P₃(OC₆H₅)₅(NHCH₂CH₂C₅H₄N‐2) ( 1 ), was determined by X‐ray structure analysis. The hexafunctionalized derivative N₃P₃(NHCH₂CH₂C₅H₄N‐2)₆ ( 10 ) reacts with dichloromethane to form the HCl salt ( 10 a ) the structure of which could also determined by X‐ray crystal structure analysis. Complex formation of N₃P₃(OC₆H₅)₅(NHCH₂C₅H₄N‐3) ( 2 ) with cobalt(II) chloride yields the cobalt complex ( 2 a ) in which two molecules of the ligand are bonded to the tetrahedraly coordinated cobalt atom by the pyridine nitrogen atoms. The tetra functionalized ligand gem‐N₃P₃(OC₆H₅)₂(NHCH₂CH₂C₅H₄N‐2)₄ ( 8 ) forms the dinuclear cobalt‐cobaltate complex ( 8 a ) by interactions of a phosphazene nitrogen atom and the pyridine atoms of two cis‐vicinal functional groups with a CoCl unit and a pyridine group with a CoCl₃‐unit.     

Anionic polymerization of methyl methacrylate initiated with late transition‐metal halides/organolithium/triisobutylaluminum systems

Anionic polymerization of methyl methacrylate (MMA) initiated with late transition‐metal halides [manganese chloride (MnCl₂), iron dichloride (FeCl₂), iron trichloride (FeCl₃), cobalt chloride (CoCl₂), or nickel bromide (NiBr₂)]/organolithium [nButyllithium (nBuLi) or phenyllithium (PhLi)]/triisobutylaluminum (iBu₃Al) systems is described. Except for the system with NiBr₂, the polymerizations of MMA afforded narrow molecular weight distribution poly(methyl methacrylate)s (PMMAs) with high molecular weights in quantitative yields at 0 °C in toluene. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) analyses of the PMMAs obtained by the systems with FeCl₂, FeCl₃, and CoCl₂ revealed that the polymers had hydrogen (H) at both chain ends. Accordingly, the reaction of the transition‐metal halides with the organolithium in the presence of iBu₃Al should result in the formation of transition‐metal hydride [M‐H]^? species, which was nucleophilic enough to initiate the MMA polymerization. Because the presence of a six‐membered cyclic structure resulting from backbiting was confirmed from the MALDI‐TOF MS analyses of the PMMA obtained with the metal halide (FeCl₂, FeCl₃, or CoCl₂)/organolithium systems in the absence of iBu₃Al, the introduction of H at the ω‐chain end indicated that iBu₃Al should prevent the backbiting. However, the MnCl₂/nBuLi/iBu₃Al initiating system gave PMMAs bearing H at the α chain end and six‐membered cyclic structure at the ω chain end. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1962–1977, 2003     

Synthesis,characterization and catalytic activity of peripherally tetra‐substituted Co(II) phthalocyanines for cyclohexene oxidation

New 3,3‐diphenylpropoxyphthalonitrile (5) was obtained from 3,3‐diphenylpropanol (3) and 4‐nitrophthalonitrile (4) with K₂CO₃ in DMF at 50 °C. The novel cobalt(II) phthalocyanine complexes, tetrakis‐[2‐(1,4‐dioxa‐8‐azaspiro[4.5]dec‐8‐yl)ethoxy] phthalocyaninato cobalt(II) (2) and tetrakis‐(3,3‐diphenylpropoxy)phthalocyaninato cobalt(II) (6) were prepared by the reaction of the phthalonitrile derivatives 1 and 5 with CoCl₂ by microwave irradiation in 2‐(dimethylamino)ethanol for at 175 °C, 350 W for 7 and 10 min, respectively. These new cobalt(II)phthalocyanine complexes were characterized by spectroscopic methods (IR, UV–visible and mass spectroscopy) as well as elemental analysis. Complexes 2 and 6 are employed as catalyst for the oxidation of cyclohexene using tert‐butyl hydroperoxide (TBHP), m‐chloroperoxybenzoic acid (m‐CPBA), aerobic oxygen and hydrogen peroxide (H₂O₂) as oxidant. It is observed that both complexes can selectively oxidize cyclohexene to give 2‐cyclohexene‐1‐ol as major product, and 2‐cyclohexen‐1‐one and cyclohexene oxide as minor products. TBHP was found to be the best oxidant since minimal destruction of the catalyst, higher selectivity and conversion were observed in the products. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,characterization, and antimicrobial activities of Cu(I), Ag(I), Au(I), and Co(II) complexes with [CH3N(CH2PPh2)2]

Transition metal complexes of ditertiary aminomethylphosphine ligand, (Ph₂PCH₂)NCH₃ [N,N‐bis(diphenylphospinomethyl)aminomethane], dppam, with metal ions which are Ag(I), Au(I), Cu(I), and Co(II) have been synthesized under nitrogen atmosphere by the Schlenk method. [Ag(dppam)₂]NO₃ ( 1 ), [Au(dppam)₂]Cl ( 2 ), and [Cu(dppam)₂]Cl ( 3 ) complexes have been isolated as colorless solids, whereas [CoCl₂(dppam)] ( 4 ) complex as a blue solid. All complexes have been characterized by atomic absorption, FT‐IR, NMR (¹H, ¹³C, ³¹P) spectroscopic, thermogravimetric/differantial thermal analysis (TG/DTA), and elemental analysis techniques. Antimicrobial activity of 1 , 2 , 3 , and 4 were studied in vitro on 13 bacteria and 4 yeasts. The cobalt(II) phosphine complex has shown the best antimicrobial activity in comparison with the other metal complexes. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:484–491, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20145     

Some Novel Cobalt Diphenylphosphine Complexes: Synthesis,Characterization, and Behavior in the Polymerization of 1,3-Butadiene

Some novel cobalt diphenylphosphine complexes were synthesized by reacting cobalt(II) chloride with (2-methoxyethyl)diphenylphosphine, (2-methoxyphenyl)diphenylphosphine, and 2-(1,1-dimethylpropyl)-6-(diphenylphosphino)pyridine. Single crystals suitable for X-ray diffraction studies were obtained for the first two complexes, and their crystal structure was determined. The novel compounds were then used in association with methylaluminoxane (MAO) for the polymerization of 1,3-butadiene, and their behavior was compared with that exhibited in the polymerization of the same monomer by the systems CoCl₂(PⁿPrPh₂)₂/MAO and CoCl₂(PPh₃)₂/MAO. Some significant differences were observed depending on the MAO/Co ratio used, and a plausible interpretation for such a different behavior is proposed.     

Hydrodebromination of bromoarenes using Grignard reagents catalyzed by metal ions

The metal salts, FeCl^·₂4H₂O, FeCl₃, NiCl₂, CoCl₂, CuBr and some iron complexes were found to be efficient catalysts for hydrodebromination of bromoarenes under mild reaction conditions with two equivalents of Grignard reagents. Among them, the iron systems showed the best behavior regarding economic and environmental considerations. All the alkyl Grignard reagents (except CH₃MgCl) and p‐tolylMgBr were promising reductive reagents with the formation of their homo‐coupling products. Copyright © 2008 John Wiley & Sons, Ltd.     

Crystal Structure and Ethylene Oligomerization Catalytic Activity of {2-Carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2

The unsymmetric precursor ethyl 6-acetylpyridine-2-carboxylate （4） was synthesized from 2,6-dimethylpyridine （1）. On the basis of this precursor, a new mono（imino）pyridine ligand （5） and the corresponding Co（Ⅱ） complex {2-carbethoxy-6-[1-[（2,6-diethylphenyl）imino]ethyl]pyridine}CoCl2 （6） were prepared. The crystal structure of complex indicates that the 2-carbethoxy-6-iminopyridine is coordinated to the cobalt as a tridentate ligand using [N, N, O] atoms, and the coordination geometry of the central cobalt is a distorted trigonal bipyramid, with the pyridyl nitrogen atom and the two chlorine atoms forming the equatorial plane. Being applied to the ethylene oligomedzation, this cobalt complex shows catalytic activity of 1.820× 10^4 g/mol-Cooh at 101325 Pa of ethylene at 15.5℃ for 1 h, when 1000 equiv, of methylaluminoxane （MAO） is employed as the cocatalyst.     

Cobalt(II) chloride adducts with acetonitrile,propan‐2‐ol and tetrahydrofuran: considerations on nuclearity,reactivity and synthetic applications

High‐spin cobalt(II) complexes are considered useful building blocks for the synthesis of single‐molecule magnets (SMM) because of their intrinsic magnetic anisotropy. In this work, three new cobalt(II) chloride adducts with labile ligands have been synthesized from anhydrous CoCl₂, to be subsequently employed as starting materials for heterobimetallic compounds. The products were characterized by elemental, spectroscopic (EPR and FT–IR) and single‐crystal X‐ray diffraction analyses. trans‐Tetrakis(acetonitrile‐κN )bis(tetrahydrofuran‐κO )cobalt(II) bis[(acetonitrile‐κN )trichloridocobaltate(II)], [Co(C₂H₃N)₄(C₄H₈O)₂][CoCl₃(C₂H₃N)]₂, (1), comprises mononuclear ions and contains both acetonitrile and tetrahydrofuran (thf) ligands, The coordination polymer catena‐poly[[tetrakis(propan‐2‐ol‐κO )cobalt(II)]‐μ‐chlorido‐[dichloridocobalt(II)]‐μ‐chlorido], [Co₂Cl₄(C₃H₈O)₄], (2′), was prepared by direct reaction between anhydrous CoCl₂ and propan‐2‐ol in an attempt to rationalize the formation of the CoCl₂–alcohol adduct (2), probably CoCl₂(HOⁱPr)_m . The binuclear complex di‐μ‐chlorido‐1:2κ⁴Cl :Cl‐dichlorido‐2κ²Cl‐tetrakis(tetrahydrofuran‐1κO )dicobalt(II), [Co₂Cl₄(C₄H₈O)₄], (3), was obtained from (2) after recrystallization from tetrahydrofuran. All three products present cobalt(II) centres in both octahedral and tetrahedral environments, the former usually less distorted than the latter, regardless of the nature of the neutral ligand. Product (2′) is stabilized by an intramolecular hydrogen‐bond network that appears to favour a trans arrangement of the chloride ligands in the octahedral moiety; this differs from the cis disposition found in (3). The expected easy displacement of the bound solvent molecules from the metal coordination sphere makes the three compounds good candidates for suitable starting materials in a number of synthetic applications.     

Cobalt (II) and Copper (I) Complexes of Rigid Bidentate [N‐(2, 6‐Diisopropyl‐phenyl)imino]acenapthenone Ligand: Synthesis and Structural Studies

The cobalt(II) complex [CoCl₂(2, 6‐iPrC₆H₃‐BIAO)]₂ ( 1 ) of rigid unsymmetrical imine, carbonyl mixed ligand [N‐(2, 6‐diisopropylphenyl)‐imino]acenapthenone] (2, 6‐iPrC₆H₃‐BIAO) ( L1 ) can be achieved by the reaction of CoCl₂ and neutral [N‐(2, 6‐diisopropylphenyl)‐imino]acenapthenone] ligand. When ligand L1 reacted with CuCl in dichloromethane solution, only nitrogen coordinated copper complex [CuCl(2, 6‐iPrC₆H₃‐BIAO)] ( 2 ) was obtained. In the solid‐state structure, compound 1 is dimeric through the chelating two μ₂ chlorine atoms and each cobalt atom adopts either a distorted trigonal bipyramidal or a distorted square pyramidal arrangement. In contrast, the molecular structure of compound 2 reveals that copper is coordinated by imino nitrogen and adopts a linear arrangement around the central metal atom. The crystal structure of the rigid bidentate mixed nitrogen and oxygen ligand (2, 6‐iPrC₆H₃‐BIAO) ( L1 ) is also reported.     

Synthesis and Structural Features of New Schiff Base Complexes of Mononuclear MnIV,Dinuclear CoIICoIII,and Tetranuclear CuII

2‐(((2‐Hydroxy‐3‐methoxyphenyl)methylene)amino)‐2(hydroxymethyl)‐1,3‐propanediol (LH₄, as abbreviation) reacts with MnCl₂ · 4H₂O, CoCl₂ · 6H₂O, and Cu(ClO₄)₂ · 6H₂O to give the new complexes [Mn(LH₂)₂] ( 1 ), [Co₂Cl(H₂O)(LH₂)₂] · 4H₂O ( 2 ), and [Cu₄(LH₂)₄(H₂O)₄] ( 3 ). Complex 1 is formed by the assembly of two molecules of the ligand with one manganese(IV) ion. In the mixed‐valence cobalt complex 2 there is an asymmetry between the coordination spheres of cobalt(II) and cobalt(III). In the tetramer 3 four copper(II) ions attain a distorted tetrahedral configuration surrounded by four molecules of the ligand.     

Synthese und Charakterisierung von Cobalt(II)‐ und Kupfer(I)‐Komplexen mit Guanidin‐Pyridin‐Hybridliganden

Syntheses and Structures of Cobalt(II) and Copper(I) Complexes with Guanidine‐Pyridine Hybridligands The guanidine‐pyridine hybridligands N‐(1,3‐dimethylimidazolidin‐2‐ylidene)‐2‐(pyridine‐2‐yl)ethanamine (DMEGepy, L1 ) and 1,1,3,3‐tetramethyl‐2‐(2‐(pyridine‐2‐yl)ethyl)guanidine (TMGepy, L2 ) have been synthesized and characterized. The reaction of DMEGepy with CoCl₂ and TMGepy with CuI lead to the mononuclear complexes {N‐(1,3‐dimethylimidazolidin‐2‐ylidene)‐2‐(pyridine‐2‐yl)ethanamine}cobalt(II) dichloride ( 1 ) and {1,1,3,3‐tetramethyl‐2‐(2‐(pyridine‐2‐yl)ethyl)guanidine}copper(I) iodide ( 2 ). By the characterization of these complexes we are able to compare the complexation chemistry of the hybridguanidine and bisguanidine ligands with regard to the various N donor functions systematically.     

Synthesis and characterization of metal complexes of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Ru(III), Rh(III) and Pd(II) with derivatives of 1,3,4-thiadiazole-2,5-dithiol as new ligands

The synthesis of some new transition metal complexes with 1,3,4-thiadiazole-2,5-dithiol derivatives (L₁ and L₂) as new ligands is reported. Each complex was prepared by the reaction of the ligands with the appropriate metal salts (CrCl₃, MnCl₂·4H₂O, FeCl₃, CoCl₂·6H₂O, NiCl₂·6H₂O, CuCl₂·2H₂O, RuCl₃, RhCl₃ and PdCl₂). Elemental micro analysis (C.H.N.), UV–Visible spectroscopy, ¹H NMR, infrared (IR) spectroscopy, atomic absorption, magnetic susceptibility, continuous variation method and molar conductance techniques were used to characterize the structural formulae of these chelate complexes.     

Study of the Bonding Modes of Di‐2‐pyridyl ketoxime Ligand towards Ruthenium,Rhodium and Iridium Half Sandwich Complexes

The bonding modes of the ligand di‐2‐pyridyl ketoxime towards half‐sandwich arene ruthenium, Cp*Rh and Cp*Ir complexes were investigated. Di‐2‐pyridyl ketoxime {pyC(py)NOH} react with metal precursor [Cp*IrCl₂]₂ to give cationic oxime complexes of the general formula [Cp*Ir{pyC(py)NOH}Cl]PF₆ ( 1a ) and [Cp*Ir{pyC(py)NOH}Cl]PF₆ ( 1b ), for which two coordination isomers were observed by NMR spectroscopy. The molecular structures of the complexes revealed that in the major isomer the oxime nitrogen and one of the pyridine nitrogen atoms are coordinated to the central iridium atom forming a five membered metallocycle, whereas in the minor isomer both the pyridine nitrogen atoms are coordinated to the iridium atom forming a six membered metallacyclic ring. Di‐2‐pyridyl ketoxime react with [(arene)MCl₂]₂ to form complexes bearing formula [(p‐cymene)Ru{pyC(py)NOH}Cl]PF₆ ( 2 ); [(benzene)Ru{pyC(py)NOH}Cl]PF₆ ( 3 ), and [Cp*Rh{pyC(py)NOH}Cl]PF₆ ( 4 ). In case of complex 3 the ligand coordinates to the metal by using oxime nitrogen and one of the pyridine nitrogen atoms, whereas in complex 4 both the pyridine nitrogen atoms are coordinated to the metal ion. The complexes were fully characterized by spectroscopic techniques.     

Polynuclear Chlorido Metal(II) Complexes with 1,2‐Di(1H‐­tetrazol‐1‐yl)ethane as Ligand Forming One‐ and Two‐dimensional Structures

The preparation and characterization of three metal(II) chlorido complexes with 1,2‐di(1H‐tetrazol‐1‐yl)ethane (dte) ( 1 ) as ligand is presented. The complexes have the following formula: [CoCl₂(μ‐dte)(dte)₂]_n ( 2 ), [CuCl₂(μ‐dte)₂]_n ( 3 ), and [Cd(μ‐Cl)₂(μ‐dte)]_n ( 4 ). Single crystal X‐ray diffraction of all three metal complexes was performed and the structures are discussed. All three central metal atoms are connected to polynuclear structures by the μ‐bridging ligand. Cobalt and copper are connected to one‐dimensional chains. The central cadmium(II) atoms are additionally connected by the chloride anions to a two‐dimensional network. Further, the cobalt(II) complex represents a special case with two terminal dte ligands.     

Synthesis and Magnetic Properties of Novel Azamacrocyclic LnIII,CuII, FeIII,and SrII Complexes and Conformational Analysis of the Ligands

Hexaalkoxy‐substituted azamacrocyclic metal complexes 1 · MX_n [MX_n = FeCl₃, CuCl₂, SrCl₂, Ln(NO₃)₃; Ln = La, Pr, Eu, Ho, Er] with various chain lengths were prepared by a convergent approach using 1,2‐bisalkoxy‐4,5‐diamines 3 and 4‐alkoxy‐pyridine‐2,6‐dicarbaldehydes 4 as key building blocks for template‐assisted cyclocondensation. Metal complexes 1 · MX_n were considered as potential metallomesogens. However, differential scanning calorimetry and optical polarizing microscopy of 1 · MX_n did not reveal any mesomorphism. The magnetic susceptibility shows deviation from Curie‐like behavior. Due to ligand field effects the effective magnetic moments are a function of the temperature. In order to obtain structural informations on the free ligand 1 , which is synthetically not accessible, theoretical calculations were carried out. For the free azamacrocycle 2a and the free hexamethoxy‐substituted azamacrocycle 1a the IR spectra were computed at the level of density functional theory. A planar and a saddle‐shaped conformation was considered. The IR spectra and especially the dependence of the C=N vibration on the structural parameters and the charge distribution are discussed.