Quantifying Polymer Swelling Employing a Linear Variable Differential Transformer: CO2 Effects on SBS Triblock Copolymer

A linear variable differential transformer (LVDT) was employed to evaluate CO₂‐polymer plasticization. Preliminary results on polystyrene‐block‐polybutadiene‐block‐polystyrene (SBS) elastomer are presented. At 22 °C under CO₂ pressure, SBS undergoes compression due to hydrostatic pressure. However, sample expansion occurs upon depressurization. At 45 °C, SBS undergoes swelling of 0.7% due to CO₂ plasticization, while no post‐pressurization expansion is observed. The contrasting result is explained by change in PS domain mobility and discontinuity in the density‐pressure relationship.

Linear displacement of SBS as a function of time at 56 and 134 bar CO₂.     

Sorption and swelling of semicrystalline polymers in supercritical CO2

The equilibrium sorption and swelling behavior of four different polymers—poly(methyl methacrylate), poly(tetrafluoroethylene), poly(vinylidene fluoride), and the random copolymer tetrafluoroethylene–perfluoromethylvinylether–in supercritical CO₂—are studied at different temperatures (from 40 to 80 °C) and pressures (up to 200 bar). Swelling is measured by visualization, and sorption through a gravimetric technique. From these data, the behavior of amorphous and semicrystalline polymers can be compared, particularly in terms of partial molar volume of CO₂ in the polymer matrix. Both poly(methyl methacrylate) and the copolymer of tetrafluoroethylene exhibit a behavior typical of rubbery systems. On the contrary, polymers with a considerable degree of crystallinity, such as poly(tetrafluoroethylene) and poly (vinylidene fluoride), show larger values of partial molar volume. These can be related to the limited mobility of the polymer chains in a semicrystalline matrix, which causes the structure to “freeze” during the sorption process into a nonequilibrium state that can differ significantly from the actual thermodynamic equilibrium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1531–1546, 2006     

Viscosity studies of poly(DL‐lactic acid) in supercritical CO2

The effect of supercritical CO₂ on the viscosity and activation energy to viscous flow of P_DLLA is investigated, using a high pressure parallel plate rheometer, over a range of temperatures (50–140 °C) and pressures (5–12 MPa). The Cross model is fitted to the data to enable calculation of the zero shear viscosity and critical shear rate. A significant decrease in the viscosity is observed on increasing both variables; however, at high temperatures, the pressure effect becomes negligible. An increase in the critical shear rate is also observed on raising the pressure, indicative of a reduction in the relaxation time of the polymer. Manipulation of the Arrhenius equation shows a reduction in the activation energy to viscous flow as the pressure is increased. Together, these results show that the melt processing temperature of P_DLLA can be reduced in the presence of supercritical and high pressure CO₂. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

皮革的CO2超临界流体脱灰

浸灰和脱灰是皮革制造过程的重要工序。在浸灰工序中,通过高浓度石灰乳液对动物皮的长时间处理,使其纤维介质被溶解,胶原纤维得到分散。脱灰是其后续工序,目的是除去动物皮中吸附和沉积的Ｃａ2+;调节ｐＨ值至中性并使其肿胀状态得以消除;促进鞣铬剂的发渗而与胶原纤维有效结合。常规制革工艺中,铵盐被广泛用作脱灰剂,其缺点是中和作用不充分不能有效除去Ｃａ2+,Ｃａ2+与动物油脂反应会产生“钙斑”,并产生令人不愉快的氨污染环境。而硼酸、甲酸、乙酸、柠檬酸等以单独或组合方式与铵盐一道用于脱灰[1]价格昂贵,还易引起裸皮的酸肿影响皮…     

Solubility of vinylidene fluoride polymers in supercritical CO2 and halogenated solvents

The cloud‐point behaviors of poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride‐co‐22 mol % hexafluoropropylene) (VDF–HFP₂₂) are reported at temperatures up to 250 °C and pressures up to 3000 bar in supercritical CO₂, CHF₃, CH₂F₂, CHClF₂, CClF₃, CH₃CHF₂, CH₂FCF₃, CHF₂CF₃, and CH₃CClF₂. The molecular weight of PVDF has a smaller effect on the cloud point than the solvent quality. Cloud‐point pressures for both fluoropolymers decrease as the solvent polarizability, polar moment per molar volume, and density increases. However, it is extremely difficult to dissolve either fluoropolymer in CClF₃, which has a large polarizability and a small dipole moment. CO₂ is an effective solvent because it complexes with the C F dipole at low temperatures where energetic interactions fix the phase behavior. In addition, polymer architecture has a strong impact on the cloud‐point pressure. VDF–HFP₂₂ has lower cloud‐point pressures than PVDF in all solvents because it has a larger free volume that promotes facile interactions between the solvent and the polymer segments. Cloud‐point data are also reported for amorphous poly(tetrafluoroethylene‐co‐x mol % 2,2‐bistrifluoromethyl‐4,5‐difluoro‐1,3‐dioxole) (TFE–PDD_x ; x = 65 and 85) in CO₂. These data provide an interesting comparison to the PVDF–CO₂ and VDF–HFP₂₂–CO₂ systems because TFE–PDD₆₅ and TFE–PDD₈₇ have very high glass‐transition temperatures of 160 and 240 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2832–2840, 2000     

Morphology Evolution of Poly（vinylidene fluoride） Membranes during Supercritical CO2 Assisted Phase Inversion

A supercritical carbon dioxide（Sc CO2） assisted phase inversion was developed to produce microporous poly（vinylidene fluoride）（PVDF） membranes whose morphology characteristics arise from both liquid-liquid demixing and solid-liquid demixing（crystallization）. This result was confirmed by Fourier transform infrared spectroscopy（FTIR）, from which both α and β crystals were found. As revealed by contact angle experiment, the PVDF membranes prepared via Sc CO2 assisted phase inversion were more hydrophobic compared with the control membrane produced via conventional immersionprecipitation technique. In particular, the sample with 15 wt% PVDF prepared at 45 °C and 13 MPa exhibited a contact angle of 142°, which was mainly caused by the multilevel micro- and nano- structure. The effects of polyethylene glycol（PEG）, polyvinyl pyrrolidone（PVP） and lithium chloride（Li Cl） on the structures and crystal form were investigated. PVP promoted the formation of β phase crystal form, while PEG boosts the evolution of α phase. Li Cl restrained the crystallization degree of PVDF membrane under Sc CO2.     

The use of nano- and micro-instrumented indentation tests to evaluate viscoelastic behavior of poly(vinylidene fluoride) (PVDF)

Nano-load (n-IIT) and micro-load (μ-IIT) instrumented indentation tests (IITs) were used to characterize elastic modulus and hardness in a semicrystalline polymer. The tests were conducted with loading rates ranging from 4.9 to 317 mN.min⁻¹ for n-IIT and from 300 to 10000 mN.min⁻¹ for μ-IIT. A decrease in the elastic modulus was observed as the load rate increased for the n-IIT process, and the elastic modulus increased as the load rate increased for the μ-IIT process. This behavior was explained by two-flow volume control under the indenter and the corresponding shear stress, which can influence the state of stress. The effect of holding time on the elastic modulus and hardness was also investigated for μ-IIT. E decreased with increasing holding time up to 30 s and became constant from there on. Hardness, however, decreased for all holding times evaluated. The steady state creep was only reached after 90 s, which is significantly higher than the time for elastic modulus stabilization.     

Effect of supercritical carbon dioxide on the crystallization and melting behavior of linear bisphenol A polycarbonate

The crystallization and melting behavior of bisphenol A polycarbonate treated with supercritical carbon dioxide (CO₂) has been investigated with differential scanning calorimetry. Supercritical CO₂ depresses the crystallization temperature (T_c) of polycarbonate (PC). The lower melting point of PC crystals increase nonlinearly with increasing treatment temperature. This indicates that the depression of T_c is not a constant at the same pressure. T_c decreases faster at a higher treatment temperature than at a lower temperature. The leveling off of the depression in T_c at higher pressures is due to the antiplasticization effect of the hydrostatic pressure of CO₂. The melting curves of PC show two melting endotherms. The lower melting peak moves to a higher temperature with increasing treatment temperature, pressure, and time. The higher temperature peak moves toward a higher temperature as the treatment temperature is increased, whereas this peak is independent of the treatment pressure, time, and heating rate. The double melting peaks observed for PC can be attributed to the melting of crystals with different stability mechanisms. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 280–285, 2004     

Effect of MMT,SiO2, CaCO3, and PTFE nanoparticles on the morphology and crystallization of poly(vinylidene fluoride)

The crystallization and melting behaviors of poly (vinylidene fluoride) (PVDF) with small amount of nanoparticles (1 wt %), such as montmorillonite (MMT), SiO₂, CaCO₃, or polytetrafluoroethylene (PTFE), directly prepared by melt‐mixing method were investigated by scanning electron microscopy (SEM), polarizing optical microscopy, Fourier transform infrared spectroscopy, wide angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC). The nanoparticle structure and the interactions between PVDF molecule and nanoparticle surface predominated the crystallization behavior and morphology of the PVDF. Small amount addition of these four types of nanoparticles would not affect the original crystalline phase obtained in the neat PVDF sample (α phase), but accelerated the crystallization rate because of the nucleation effect. In these four blend systems, MMT or PTFE nanoparticles could be well applied for PVDF nanocomposite preparation because of stronger interactions between particle surface and PVDF molecules. The nucleation enhancement and the growth rate of the spherulites were decreased in the order SiO₂ > CaCO₃ > PTFE > MMT. The melting and recrystallization of PVDF was found in MMT addition sample, because of the special ways of ordering of the PVDF chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Effect of supercritical CO2 on the copolymerization behavior of cyclohexene oxide/CO2 and copolymer properties with DMC/Salen‐Co(III) catalyst system

The copolymerization of cyclohexene oxide (CHO) and carbon dioxide (CO₂) was carried out under supercritical CO₂ (scCO₂) conditions to afford poly (cyclohexene carbonate) (PCHC) in high yield. The scCO₂ provided not only the C1 feedstock but also proved to be a very efficient solvent and processing aid for this copolymerization system. Double metal cyanide (DMC) and salen‐Co(III) catalysts were employed, demonstrating excellent CO₂/CHO copolymerization with high yield and high selectivity. Surprisingly, our use of scCO₂ was found to significantly enhance the copolymerization efficiency and the quality of the final polymer product. Thermally stable and high molecular weight (MW) copolymers were successfully obtained. Optimization led to excellent catalyst yield (656 wt/wt, polymer/catalyst) and selectivity (over 96% toward polycarbonate) that were significantly beyond what could be achieved in conventional solvents. Moreover, detailed thermal analyses demonstrated that the PCHC copolymer produced in scCO₂ exhibited higher glass transition temperatures (T_g ～ 114 °C) compared to polymer formed in dense phase CO₂ (T_g ～ 77 °C), and hence good thermal stability. Additionally, residual catalyst could be removed from the final polymer using scCO₂, pointing toward a green method that avoids the use of conventional volatile organic‐based solvents for both synthesis and work‐up. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2785–2793     

Conformational changes of poly(ethylene oxide) in poly(ethylene oxide)/poly(methyl methacrylate) blends by supercritical carbon dioxide

The effects of supercritical carbon dioxide (SC CO₂) fluids on the morphology and/or conformation of poly(ethylene oxide) (PEO) in PEO/poly(methyl methacrylate) (PMMA) blends were investigated by means of differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD), and Fourier transform infrared (FTIR). According to DSC data for a given blend, the melting enthalpy and, therefore, degree of crystallinity of PEO were increased, whereas the melting temperature of PEO was decreased, with SC CO₂ treatment. The enhancement of PEO crystallization with SC CO₂ treatment, as demonstrated by DSC data, was supported by WAXD data. According to FTIR quantitative analyses, before SC CO₂ treatments, the conformation of PEO was transformed from helix to trans planar zigzag via blending with PMMA. This helix‐to‐trans transformation of PEO increased proportionally with increasing PMMA content, with around 0.7% helix‐to‐trans transformation per 1% PMMA incorporation into the blend. For a given blend upon SC CO₂ treatments, the conformation of PEO was transformed from trans to helix. This trans‐to‐helix transformation of PEO decreased with increasing PMMA contents in the blends because of the presence of interactions between the two polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2479–2489, 2004     

Plasticized microporous poly(vinylidene fluoride) separators for lithium‐ion batteries. II. Poly(vinylidene fluoride) dense membrane swelling behavior in a liquid electrolyte—characterization of the swelling kinetics

Some microporous poly(vinylidene fluoride) (PVdF) separators for lithium‐ion batteries, used in liquid organic electrolytes based on a mixture of carbonate solvents and lithium salt LiPF₆, were characterized by the study of the swelling phenomena on dense PVdF membranes. Various aspects of the kinetics of the carbonate solvents and the solvent mixture sorption in dense PVdF slabs were studied at different temperatures. Non‐Fickian behavior, characterized by S‐shaped sorption curves, was highlighted, and a salt effect, which resulted in two‐stage sorption, was studied. Diffusion coefficients and activation energies were calculated for the Fickian portions of the sorption curves, that is, at short times and low swelling ratios. A strong influence of the different interaction parameters was shown for the swelling kinetics. This study proved that the swelling of microporous PVdF membranes could be considered instantaneous. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 544–552, 2004     

Anomalous melting behavior of cyclohexane and cyclooctane in poly(dimethyl siloxane) precursors and model networks

Building on previous observations of anomalous melting behavior of solvents in polyisoprene, we have expanded our insight into the melting behavior of organic solvents in polymers and polymer networks through a calorimetric investigation of cylcohexane and cyclooctane in poly(dimethyl siloxane) (PDMS) precursors and model networks. The results are contrary to general expectations. Besides deviations between the predictions of the Flory-Huggins model and observed melting point depression of the small molecule organics, it is found that the melting point depression of cyclohexane in model networks is lower than that in the uncrosslinked precursors and unaffected by the molecular weight between crosslinks, which is not consistent with the general observation that higher crosslinking density leads to greater melting point depression. We interpret the observed phenomenon in terms of phase separation. In the case of cyclooctane, it exhibits a double melting peak in the model networks with high molecular weight between crosslinks. Furthermore, the heats of fusion of both cyclohexane and cyclooctane decrease with increasing polymer volume fraction which violates the underlying assumption that the heat of fusion of solvent in the polymer is the same as that in the bulk for both the Flory-Huggins model and the Gibbs-Thomson equation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2779–2791, 2008     

Processing and characterization of oriented electrospun poly(vinylidene fluoride) mats

Mats of highly oriented poly(vinylidene fluoride) nanofibers were electrospun by means of a conventional electrospinning equipment; the orientation, however, was obtained using a disk collector rotating at a speed of 4000 rpm and a device that reduced the influence of air displacement during nanofiber orientation. Thermal transitions of the mats were determined by differential scanning calorimetry, the predominant crystalline phase by Fourier transform infrared spectroscopy and wide‐angle X‐ray scattering and the nanofiber orientation and morphology by scanning electron microscopy. Relative permittivity, loss index, stable remnant polarization, and coercive field of the mats were also determined and compared with those obtained for a mat electrospun at 2000 rpm and an oriented commercial film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 000: 000–000, 2012     

Fabrication‐controlled morphology of poly(butylene succinate) nano‐microcellular foams by supercritical CO2

Poly(butylene succinate) urethane ionomer (PBSUIs) foams with nano‐microcellular morphology were fabricated using supercritical CO₂ (sc‐CO₂) at different parameters. Effect of urethane ionic group (UIG) content (ranged from 1% to 5%) on the rheology and crystallization of PBSUIs were evaluated by intrinsic, dynamic rheological, X‐ray diffraction, and differential scanning calorimetry measurements. The results show that the complex viscosity of PBSUIs vastly improved, while their intrinsic viscosity and crystallinity decreased. They also evidenced that CO₂ promoted the formation of crystallites in the amorphous and increased the X_c of PBSU and PBSUIs foams. Scanning electron microscope was employed to explore the influences of UIG content and foaming parameters on the morphologies of PBSUIs microcellular foams, and it revealed that UIG content was the dominated factor. The cell size and cell densities of PBSUIs microcellular foams were smaller than 5.0 micrometers and higher than 1.5 × 10¹⁰ cells/cm³, respectively, even foamed at diverse variations of foam temperature and pressure. Interestingly, PBSUIs with 3% and 5% UIG content achieved microcellular foams in nano‐cells, high‐stretched elliptical shape. The mechanism was ascribed that these PBSUIs with high melt viscosities could retard the CO₂ bubbles to merge during the foam process and induce the cells to stretch and orient in depressururization direction. This study proposed a novel method for fabricating PBS nano‐microcellular foams.     

Quantitative confirmation of the crystal-amorphous interphase in semicrystalline poly(vinylidene fluoride) and poly (vinylidene fluoride)/poly (ethyl methacrylate) blends

Dielectric and thermal characterizations were performed for poly (vinylidene fluoride) (PVDF)/poly (ethyl methacrylate) (PEMA) blends of different composition. The characteristics of PVDF β relaxation were shown to be little affected in the semicrystalline blends with PEMA. The relaxation strength, however, depends strongly on the PEMA content and a linear relation was found between the intensity of the β relaxation and the weight fraction of the PVDF crystal-amorphous interphase. Phase structures of the PVDF/PEMA blends are also proposed. © 1994 John Wiley & Sons, Inc.     

Radiation grafting of styrene onto poly(vinylidene fluoride) films in propanol: The influence of solvent and synthesis conditions

Electron‐beam‐irradiated poly(vinylidene fluoride) films were grafted with styrene with propanol or toluene as a solvent. The influence of the synthesis conditions and, more particularly, of the solvent was investigated. In propanol, the order of dependence of the grafting rate is 0.43 on the pre‐irradiation dose and 1.2 on the monomer concentration. The activation energy of the grafting reaction in propanol is approximately 73 kJ/mol. Both the initial grafting rate and the saturation degree of grafting are considerably higher in propanol, which is unable to swell polystyrene grafts, than in toluene, which diffuses with styrene through the grafted moiety. The grafting solvent also influences the structure of the membrane: films grafted in propanol have a much reduced elongation at break and a rougher surface. It is suggested that phase‐separated polystyrene domains may be larger when grafting is carried out in a styrene–propanol solution. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1512–1519, 2000     

Mild-temperature Mn2(CO)10-photomediated controlled radical polymerization of vinylidene fluoride and synthesis of well-defined poly(vinylidene fluoride) block copolymers

By contrast to typical high-temperature (100-250 °C) telo-/polymerizations of gaseous fluorinated monomers, carried out in high-pressure metal reactors, the visible light, Mn(2)(CO)(10)-photomediated initiation of vinylidene fluoride (bp = -83 °C) polymerization occurs readily from a variety of alkyl, semifluorinated, and perfluorinated halides at 40 °C, in low-pressure glass tubes and in a variety of solvents, including water and alkyl carbonates. Perfluorinated alkyl iodide initiators also induce a controlled radical polymerization via iodine degenerative transfer (IDT). While IDT proceeds with accumulation of the less reactive P(m)-CF(2)-CH(2)-I vs the P(n)-CH(2)-CF(2)-I chain ends, Mn(2)(CO)(10) enables their subsequent quantitative activation toward the synthesis of well-defined poly(vinylidene fluoride) block copolymers with a variety of other monomers.     

Comparative studies on miscibility and phase behavior of linear and star poly(2‐methyl‐2‐oxazoline) blends with poly(vinylidene fluoride)

The comparative studies on the miscibility and phase behavior between the blends of linear and star‐shaped poly(2‐methyl‐2‐oxazoline) with poly(vinylidene fluoride) (PVDF) were carried out in this work. The linear poly(2‐methyl‐2‐oxazoline) was synthesized by the ring opening polymerization of 2‐methyl‐2‐oxazoline in the presence of methyl p‐toluenesulfonate (MeOTs) whereas the star‐shaped poly(2‐methyl‐2‐oxazoline) was synthesized with octa(3‐iodopropyl) polyhedral oligomeric silsesquioxane [(IC₃H₆)₈Si₈O₁₂, OipPOSS] as an octafunctional initiator. The polymers with different topological structures were characterized by means of Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. It is found that the star‐shaped poly(2‐methyl‐2‐oxazoline) was miscible with poly(vinylidene fluoride) (PVDF), which was evidenced by single glass‐transition temperature behavior and the equilibrium melting‐point depression. Nonetheless, the blends of linear poly(2‐methyl‐2‐oxazoline) with PVDF were phase‐separated. The difference in miscibility was ascribed to the topological effect of PMOx macromolecules on the miscibility. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 942–952, 2006     

Miscibility in blends of poly(3-hydroxybutyrate) and poly(vinylidene chloride-co-acrylonitrile)

Miscibility behavior of poly(3-hydroxybutyrate) [PHB]/poly(vinylidene chloride-co-acrylonitrile) [P(VDC-AN)] blends have been investigated by differential scanning calorimetry and optical microscopy. Each blend showed a single T_g, and a large melting point depression of PHB. All the blends containing more than 40% PHB showed linear spherulitic growth behavior and the growth rate decreased with P(VDC-AN) content. The interaction parameter χ₁₂, obtained from melting point depression analysis, gave the value of −0.267 for the PHB/P(VDC-AN) blends. All results presented in this article lead to the conclusion that PHB/P(VDC-AN) blends are completely miscible in all proportions from a thermodynamic viewpoint. The miscibility in these blends is ascribed to the specific molecular interaction involving the carbonyl groups of PHB. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2645–2652, 1997