Synthese und Kristallstrukturen von [Cu4(As4Ph4)2(PRR′2)4], [Cu14(AsPh)6(SCN)2(PEt2Ph)8], [Cu14(AsPh)6Cl2(PRR′2)8], [Cu12(AsPh)6(PPh3)6], [Cu10(AsPh)4Cl2(PMe3)8], [Cu12(AsSiMe3)6(PRR′2)6] und [Cu8(AsSiMe3)4(PtBu3)4] (R,R′ = organische Gruppen)

Syntheses and Crystal Structures of [Cu₄(As₄Ph₄)₂(PRR′₂)₄], [Cu₁₄(AsPh)₆(SCN)₂(PEt₂Ph)₈], [Cu₁₄(AsPh)₆Cl₂(PRR′₂)₈], [Cu₁₂(AsPh)₆(PPh₃)₆], [Cu₁₀(AsPh)₄Cl₂(PMe₃)₈], [Cu₁₂(AsSiMe₃)₆(PRR′₂)₆], and [Cu₈(AsSiMe₃)₄(P^tBu₃)₄] (R, R′ = Organic Groups) Through the reaction of CuSCN with AsPh(SiMe₃)₂ in the presence of tertiary phosphines the compounds [Cu₄(As₄Ph₄)₂(PRR′₂)₄] ( 1 – 3 ) ( 1 : R = R′ = ⁿPr, 2 : R = R′ = Et; 3 : R = Me, R′ = ⁿPr) and [Cu₁₄(AsPh)₆(SCN)₂(PEt₂Ph)₈] ( 4 ) can be synthesised. Using CuCl instead of CuSCN results to the cluster complexes [Cu₁₄(AsPh)₆Cl₂(PRR′₂)₈] ( 5–6 ) ( 5 : R = R′ = Et; 6 : R = Me, R′ = ⁿPr), [Cu₁₂(AsPh)₆(PPh₃)₆] ( 7 ) and [Cu₁₀(AsPh)₄Cl₂(PMe₃)₈] ( 8 ). Through reactions of CuOAc with As(SiMe₃)₃ in the presence of tertiary phosphines the compounds [Cu₁₂(AsSiMe₃)₆(PRR′₂)₆] ( 9 – 11 ) ( 9 : R = R′ = Et; 10 : R = Ph, R′ = Et; 11 : R = Et, R′ = Ph) and [Cu₈(AsSiMe₃)₄(P^tBu₃)₄] ( 12 ) can be obtained. In each case the products were characterised by single‐crystal‐X‐ray‐structure‐analyses. As the main structure element 1 – 3 each have two As₄Ph₄^2–‐chains as ligands. In contrast 4 – 12 contain discrete AsR^2–ligands.     

Synthese und Strukturen neuer selenido‐ und selenolatoverbrückter Kupfercluster: [Cu38Se13(SePh)12(dppb)6] (1), [Cu(dppp)2][Cu25Se4(SePh)18(dppp)2] (2), [Cu36Se5(SePh)26(dppa)4] (3), [Cu58Se16(SePh)24(dppa)6] (4) und [Cu3(SeMes)3(dppm)] (5)

Syntheses and Crystal Structures of new Selenido‐ and Selenolato‐bridged Copper Clusters: [Cu₃₈Se₁₃(SePh)₁₂(dppb)₆] (1), [Cu(dppp)₂][Cu₂₅Se₄(SePh)₁₈(dppp)₂] (2), [Cu₃₆Se₅(SePh)₂₆(dppa)₄] (3), [Cu₅₈Se₁₆(SePh)₂₄(dppa)₆] (4), and [Cu₃(SeMes)₃(dppm)] (5) The reactions of copper(I) chloride or copper(I) acetate with monodentate phosphine ligands (PR₃; R = organic group) and Se(SiMe₃)₂ have already lead to the formation of CuSe clusters with up to 146 copper and 73 selenium atoms. If the starting materials and the bidentate phosphine ligands (Ph₂P–(CH₂)_n–PPh₂, n = 1: dppm, n = 3: dppp, n = 4: dppb; Ph₂P–C≡C–PPh₂: dppa) and silylated chalcogen derivates are changed (RSeSiMe₃; R = Ph, Mes) a series of new CuSe clusters can be synthesized. From single crystal X‐ray structure analysis one can characterise [Cu₃₈Se₁₃(SePh)₁₂(dppb)₆] ( 1 ), [Cu(dppp)₂] · [Cu₂₅Se₄(SePh)₁₈(dppp)₂] ( 2 ), [Cu₃₆Se₅(SePh)₂₆(dppa)₄] ( 3 ), [Cu₅₈Se₁₆(SePh)₂₄(dppa)₆] ( 4 ) and [Cu₃(SeMes)₃(dppm)] ( 5 ). In this new class of CuSe clusters, compounds 1 and 4 possess a spherical cluster skeleton, wheras 2 and 3 have a layered cluster core.     

[Ge9{Si(SiMe3)3}2{Ge(SiMe3)3}]–: The Mixed Substituted Metalloid Germanium Cluster and the Intermetalloid Cluster [ZnGe18{Si(SiMe3)3}4{Ge(SiMe3)3}2]

The novel metalloid germanium cluster [Ge₉(Hyp)₂Hyp^Ge]^– ( 1 ) was synthesized, exhibiting two different bulky groups [Hyp = Si(SiMe₃)₃; Hyp^Ge = Ge(SiMe₃)₃]. Further reaction of 1 with ZnCl₂ gives the derivative [ZnGe₁₈(Hyp)₄(Hyp^Ge)₂] ( 2 ) in good yield, showing that the substitution of Si(SiMe₃)₃ by Ge(SiMe₃)₃ within a metalloid Ge₉R₃^– compound leads to a comparable reactivity. 1 and 2 are characterized by NMR spectroscopy, mass spectrometry ( 1 ) and single crystal structure analyses ( 2 ). 1 and 2 are the first metalloid germanium clusters bearing germyl groups.     

On the Reactivity of Silylated Ge9 Clusters: Synthesis and Characterization of [ZnCp*(Ge9{Si(SiMe3)3}3)], [CuPiPr3(Ge9{Si(SiMe3)3}3)], and [(CuPiPr3)4{Ge9(SiPh3)2}2]

We report on the synthesis of new derivatives of silylated clusters of the type [Ge₉(SiR₃)₃]^? (R = SiMe₃, Me = CH₃; R = Ph, Ph = C₆H₅) as well as on their reactivity towards copper and zinc compounds. The silylated cluster compounds were synthesized by heterogeneous reactions starting from the Zintl phase K₄Ge₉. Reaction of K[Ge₉{Si(SiMe₃)₃}₃] with ZnCl₂ leads to the already known dimeric compound [Zn(Ge₉{Si(SiMe₃)₃}₃)₂] ( 1 ), whereas upon the reaction with [ZnCp*₂] the coordination of [ZnCp*]⁺ to the cluster takes place (Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) under the formation of [ZnCp*(Ge₉{Si(SiMe₃)₃}₃)] ( 2 ). A similar reaction leads to [CuPiPr₃(Ge₉{Si(SiMe₃)₃}₃)] ( 3 ) from [CuPiPr₃Cl] (iPr=isopropyl). Further we investigated the novel silylated cluster units [Ge₉(SiPh₃)₃]^? ( 4 ) and [Ge₉(SiPh₃)₂]^? ( 5 ), which could be identified by mass spectroscopy. Bis‐ and tris‐silylated species can be synthesized by the respective stoichiometric reactions, and the products were characterized by ESI‐MS and NMR experiments. These clusters show rather different reactivity. The reaction of the tris‐silylated anion 4 with [CuPiPr₃Cl] leads to [(CuPiPr₃)₃Ge₉(SiPh₃)₂]⁺ as shown from NMR experiments and to [(CuPiPr₃)₄{Ge₉(SiPh₃)₂}₂] ( 6 ), which was characterized by single‐crystal X‐ray diffraction. Compound 6 shows a new type of coordination of the Cu atoms to the silylated Zintl clusters.     

Synthesen und Kristallstrukturen von [Pd9As8(PPh3)8] und [Pd9Sb6(PPh3)8]

Syntheses and Crystal Structures of [Pd₉As₈(PPh₂)₈] and [Pd₉Sb₆(PPh₃)₈] [PdCl₂(PPh₃)₂] reacts with As(SiMe₃)₃ to give the new cluster [Pd₉As₈(PPh₃)₈] ( 4 ). 4 has been characterized by X-ray crystal structure analysis. It is a molecule in which four [Pd₂(PPh₃)₂]-units are bridged by As₂-units. A further Pd atom is located in the centre of the cluster. 4 crystallizes in the space group C2/c with four formula units per unit cell. The lattice constants at 200 K are: a = 3 970.6(3), b = 1 648.90(16), c = 3 266.30(20) pm, β = 131,44(4)°. The reaction of [PdCl₂(PPh₃)₂] with Sb(SiMe₃)₃ yields [Pd₉Sb₆(PPh₃)₈] ( 5 ). 5 consists of a body centred cubic Pd₉-cluster. All of the cube faces are capped by μ₄-Sb-ligands. 5 crystallizes in the space group Pn3 with two formula units per unit cell. The lattice constants at 200 K are: a = b = c = 1 995.4(2) pm.     

Reactivity of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine with CuI and [Cu(MeCN)4][PF6]: Benzimidazole Formation vs. Cu Oxidation

The reaction of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine (TMG₂PA) ( 1 ) with CuI in MeCN results in the formation of [Cu^II(TMG₂PA^amid)I] ( 2 ) indicatingthat Cu^I is the target of an oxidative attack of the N‐H proton of the ligand which itself is converted to molecular hydrogen. In contrast, if [Cu(MeCN)₄][PF₆] is used as the Cu^I source, [Cu^I₂(TMGbenz)₂][PF₆]₂ ( 3 ) is obtained instead. The use of the non‐coordinating counterion [PF₆]^– apparently prevents Cu^I from oxidation but induces itself a cyclisation reaction within the ligand which results in the formation of a benzimidazole‐guanidine ligand.     

Neue Gold‐Selen‐Komplexverbindungen: Synthesen und Strukturen von [Au10Se4(dpppe)4]Br2, [Au2Se(dppbe)]∞, [(Au3Se)2(dppbp)3]Cl2 und [Au34Se14(tpep)6(tpepSe)2]Cl6

Novel Gold Selenium Complexes: Syntheses and Structures of [Au₁₀Se₄(dpppe)₄]Br₂, [Au₂Se(dppbe)]_∞, [(Au₃Se)₂(dppbp)₃]Cl₂, and [Au₃₄Se₁₄(tpep)₆(tpep^Se)₂]Cl₆ The reaction of gold phosphine complexes [(AuX)(PR₃)] (X= halogen; R = org. group) with Se(SiMe₃)₂ yield to new chalcogeno bridged gold complexes. Especially within the use of polydentate phosphine ligands cluster complexes like [Au₁₀Se₄(dpppe)₄]Br₂ ( 1 ) (dpppe = 1, 5‐Bis(diphenylphosphino)pentane), [Au₂Se(dppbe)]_∞ ( 2 ) (1, 4‐Bis(diphenylphosphino)benzene), [(Au₃Se)₂(dppbp)₃]Cl₂ ( 3 ) (dppbp = 4, 4′‐Bis‐diphenylphosphino)biphenyl) und [Au₃₄Se₁₄(tpep)₆(tpep^Se)₂]Cl₆ ( 4 ) (tpep = 1, 1, 1‐Tris(diphenylphosphinoethyl)phosphine, tpep^Se = 1, 1‐Bis(diphenylphosphinoethyl)‐1‐(diphenylselenophosphinoethylphosphine) could be isolated and their structures could be determined by X‐ray diffraction. ( 1: Space group P1 (No. 2), Z = 2, a = 1642.1(11), b = 1713.0(9), c = 2554.0(16) pm, α = 80.41(3)°, β = 76.80(4)°, γ = 80.92(4)°; 2: Space group P2₁/n (No. 14), Z = 4, a = 947.3(2), b = 1494.9(3), c = 2179.6(7) pm, β = 99.99(3)°; 3: Space group P2₁/c (No. 14), Z = 8, a = 2939.9(6), b = 3068.4(6), c = 3114.5(6) pm, β = 109.64(3)°; 4: Space group P1 (No. 2), Z = 1, a = 2013.7(4), b = 2420.6(5), c = 2462.5(5) pm, α = 77.20(3), β = 74.92(3), γ = 87.80(3)°).     

(PPh4)[(ReO2S2)CuI] und (NEt4)2[(ReOS3)Cu3Cl4]: Fixierung der bisher nicht isolierten Ionen [ReO2S2]− und [ReOS3]− durch Ausnutzung der Stabilität der CuS2(Re)- und Cu3S3(Re)-Fragmente

(PPh₄)[(ReO₂S₂)CuI] and (NEt₄)₂[ReOS₃)Cu₃Cl₄]: Fixation of the up to now not Isolated Ions [ReO₂S₂]^? and [ReOS₃]^? Utilizing the Stability of the CuS₂(Re) and Cu₃S₃(Re) Fragments (PPh₄)[(ReO₂S₂)CuI] ( 1 ) and (NEt₄)₂[ReOS₃)Cu₃Cl₄] ( 2 ) containing the up to now not isolated oxothioperrhenate ions [ReO₂S₂]^? and [ReOS₃]^? as ligands, have been prepared by the reaction of (NEt₄)[ReS₄] with PPh₃ and CuI in acetone in the presence of (PPh₄)I (( 1 )) or with CuCl in CH₂Cl₂ in the presence of (NEt₄)Cl (( 2 )), respectively. 1 and 2 have been characterized by X-ray structure analysis, elemental analysis and spectroscopic studies (IR, UV/Vis). The electronic spectra show bands which can approximately be assigned to interesting low-energy charge-transfer-transitions of the type d(Cu) → d(Re). For crystal data see Inhaltsübersicht.     

Halide Abstraction from Organic Solvents in Reactions of a Copper(I) Alkoxide: Synthesis and Crystal Structures of [Cu5(dppm)(dppm−)2(OtBu)Cl2] and [Cu3(dppm)3Br2][CuBr2]

The synthesis and structures of the two Cu^I halide complexes [Cu₅(dppm)(dppm^?)₂(O^tBu)Cl₂] and [Cu₃(dppm)₃Br₂][CuBr₂] (dppm = Ph₂PCH₂PPh₂, dppm^? = [Ph₂PCHPPh₂]^?) are reported. The compounds were obtained by treating reaction mixtures of [CuO^tBu] and dppm with dichloromethane or dibromomethane.     

First Copper(I) and Silver(I) Complexes Containing Phosphanylphosphido Ligands

Three new complexes with phosphanylphosphido ligands, [Cu₄{μ₂‐P(SiMe₃)‐PtBu}₄] ( 1 ), [Ag₄{μ₂‐P(SiMe₃)‐PtBu₂}₄] ( 2 ) and [Cu{η¹‐P(SiMe₃)‐PiPr₂}₂]^–[Li(Diglyme)₂]⁺ ( 3 ) were synthesized and structurally characterized by X‐ray diffraction, NMR spectroscopy, and elemental analysis. Complexes 1 and 2 were obtained in the reactions of lithium derivative of diphosphane tBu₂P‐P(SiMe₃)Li · 2.7THF with CuCl and [iBu₃PAgCl]₄, respectively. The X‐ray diffraction analysis revealed that the complexes 1 and 2 present macrocyclic, tetrameric form with Cu₄P₄ and Ag₄P₄ core. Complex 3 was prepared in the reaction of CuCl with a different derivative of lithiated diphosphane iPr₂P‐P(SiMe₃)Li · 2(Diglyme). Surprisingly, the X‐ray analysis of 3 revealed that in this reaction instead of the tetramer the monomeric form, ionic complex [Cu{η¹‐P(SiMe₃)‐PiPr₂}₂]^–[Li(Diglyme)₂]⁺ was formed.     

Sm2As4O9: Ein ungewöhnliches Samarium(III)‐Oxoarsenat(III) gemäß Sm4[As2O5]2[As4O8]

Sm₂As₄O₉: An Unusual Samarium(III) Oxoarsenate(III) According to Sm₄[As₂O₅]₂[As₄O₈] Pale yellow single crystals of the new samarium(III) oxoarsenate(III) with the composition Sm₄As₈O₁₈ were obtained by a typical solid‐state reaction between Sm₂O₃ and As₂O₃ using CsCl and SmCl₃ as fluxing agents. The compound crystallizes in the triclinic crystal system with the space group (No. 2, Z = 2; a = 681.12(5), b = 757.59(6), c = 953.97(8) pm, α = 96.623(7), β = 103.751(7), γ = 104.400(7)°). The crystal structure of samarium(III) oxoarsenate(III) with the formula type Sm₄[As₂O₅]₂[As₄O₈] (≡ 2 × Sm₂As₄O₉) contains two crystallographically different Sm³⁺ cations, where (Sm1)³⁺ is coordinated by eight, but (Sm2)³⁺ by nine oxygen atoms. Two different discrete oxoarsenate(III) anions are present in the crystal structure, namely [As₂O₅]^4? and [As₄O₈]^4?. The [As₂O₅]^4? anion is built up of two Ψ¹‐tetrahedra [AsO₃]^3? with a common corner, whereas the [As₄O₈]^4? anion consists of four Ψ¹‐tetrahedra with ring‐shaped vertex‐connected [AsO₃]^3? pyramids. Thus at all four crystallographically different As³⁺ cations stereochemically active non‐binding electron pairs (“lone pairs”) are observed. These “lone pairs” direct towards the center of empty channels running parallel to [010] in the overall structure, where these “empty channels” being formed by the linkage of layers with the ecliptically conformed [As₂O₅]^4? anions and the stair‐like shaped [As₄O₈]^4? rings via common oxygen atoms (O1 – O6, O8 and O9). The oxygen‐atom type O7, however, belongs only to the cyclo‐[As₄O₈]^4? unit as one of the two different corner‐sharing oxygen atoms.     

Bis(dimethylamino)trifluoromethylsulfonium Salze: [CF3S(NMe2)2]+[Me3SiF2]‐, [CF3S(NMe2)2]+[HF2]‐ und [CF3S(NMe2)2]+[CF3S]‐

Bis(dimethylamino)trifluoro sulfonium Salts: [CF₃S(NMe₂)₂]⁺[Me₃SiF₂]^‐, [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ and [CF₃S(NMe₂)₂]⁺[CF₃S]^‐ From the reaction of CF₃SF₃ with an excess of Me₂NSiMe₃ [CF₃(NMe₂)₂]⁺[Me₃SiF₂]^‐ (CF₃‐BAS‐fluoride) ( 5 ), from CF₃SF₃/CF₃SSCF₃ and Me₂NSiMe₃ [CF₃S(NMe₂)₂]⁺‐ [CF₃S]^‐ ( 7 ) are isolated. Thermal decomposition of 5 gives [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ ( 6 ). Reaction pathways are discussed, the structures of 5 ‐ 7 are reported.     

Dinuclear Manganese(II) Complexes with Bridging Selenidodiarsenate Anions [As2Se4]4−, [As2Se5]4− and [As2Se6]2−

Solvothermal reaction of [MnCl₂(amine)] (amine = terpy and tren) with elemental As and Se at a 1:1:2 molar ratio in H₂O/tren (10:1) affords the dimanganese(II) complexes [{Mn(terpy)}₂(μ‐As₂Se₄)] ( 1 ) and [{Mn(tren)}₂(μ‐As₂Se₅)] ( 2 ) respectively. The tetradentate [As₂Se₄]^4? bridging ligands in 1 contain a central As–As bond and exhibit approximately C_2h symmetry. Pairs of gauche sited Se atoms participate in five‐membered As₂Se₂Mn chelate rings. In contrast, two AsSe₃ pyramids share a common corner in the [As₂Se₅]^4? ligands of 2 and each coordinates an [Mn(tren)]²⁺ fragment through a single terminal Se atom. Such dinuclear complexes are linked into tetranuclear moieties through weak Se···Mn interactions of length 3.026(3) Å involving one of these terminal Se atoms. At a 1:3:6 molar ratio, solvothermal reaction of [MnCl₂(tren)] with As and Se leads to formation of a second dinuclear complex [{Mn(tren)}₂(μ‐As₂Se₆)₂] ( 3 ), which contains two bridging bidentate [As₂Se₆]^2? ligands. These are cyclic with an As₂Se₄ ring and can be regarded as being derived from [As₂Se₅]^4? anions by formation of two Se‐Se bonds to an additional Se atom.     

Bildung und struktur der Cyclophosphane P4(CMe3)2[P(CMe3)2]2 und P4(SiMe3)2[P(CMe3)2]2

Formation and Structure of the Cyclophosphanes P₄(CMe₃)₂[P(CMe₃)₂]₂ and P₄(SiMe₃)₂[P(CMe₃)₂]₂ n-Triphosphanes showing a SiMe₃ and a Cl substituent at the atoms P¹ and P², like (Me₃C)₂P? P(SiMe₃)? P(CMe₃)Cl 3 or (Me₃C)₂P? P(Cl)? P(SiMe₃)₂ 4 are stable only at temperatures below ?30°C. Above this temperature these compounds lose Me₃SiCl, thus forming cyclotetraphosphanes, P₄(CMe₃)₂[P(CMe₃)₂]₂ 1 out of 3 , P₄(SiMe₃)₂[P(SiMe₃)₂]₂ 2a (cis) and 2b (trans) out of 4 . The formation of 1 proceeds via (Me₃C)₂P? P?PCMe₃ 5 as intermediate compound, which after addition to cyclopentadiene to give the Diels-Alder-adduct 6 (exo and endo isomers) was isolated. 6 generates 5 , which then forms the dimer compound 1 . Likewise (Me₃C)₂P? P?P-SiMe₃ 8 (as proven by the adduct 7 ) is formed out of 4 , leading to 2a (cis) and 2b (trans). Compound 1 is also formed out of the iso-tetraphosphane P[P(CMe₃)₂]₂[P(CMe₃)Cl] 9 , which loses P(CMe₃)₂Cl when warmed to a temperature of 20°C. 1 crystallizes monoclinically in the space group P2₁/a (no. 14); a = 1762.0(15) pm; b = 1687.2(18) pm; c = 1170.5(9) pm; β = 109.18(5)° and Z = 4 formula units in the elementary cell. The molecule possesses E conformation. The central four-membered ring is puckered (approx. symmetry 4 2m; dihedral angle 47.4°), thus bringing the substituents into a quasi equatorial position and the nonbonding electron pairs into a quasi axial position. The bond lengths in the four-membered ring of 1 (d (P? P) = 222.9 pm) are only slightly longer than the exocyclic bonds (221.8 pm). The endocyclic bond angles \documentclass{article}\pagestyle{empty}\begin{document}$ \bar \beta $\end{document}(P/P/P) are 85.0°, the torsion angles are ±33° and d (P? C) = 189.7 pm.     

Neue amido‐ und imidoverbrückte Kupferkomplexe – Synthesen und Strukturen von [{Li(OEt2)}2][Cu(NPh2)3], [ClCuN(SnMe3)3], [{CuN(SnMe3)2}4], [Cu16(NH2tBu)12Cl16], [{CuNHtBu}8], [Li(dme)3][Cu6(NHMes)3(NMes)2], [PPh3(C6H4)CuNHMes], [{[Li(dme)][Cu(NHMes)(NHPh)]}2] und [{Li(dme)3}3][Li(dme)2][Cu12(NPh)8]

New Amido and Imido Bridged Complexes of Copper – Syntheses and Structures of [{Li(OEt₂)}₂][Cu(NPh₂)₃], [ClCuN(SnMe₃)₃], [{CuN(SnMe₃)₂}₄], [Cu₁₆(NH₂^tBu)₁₂Cl₁₆], [{CuNH^tBu}₈], [Li(dme)₃][Cu₆(NHMes)₃(NMes)₂], [PPh₃(C₆H₄)CuNHMes], [{[Li(dme)][Cu(NHMes)(NHPh)]}₂], and [{Li(dme)₃}₃][Li(dme)₂][Cu₁₂(NPh)₈] The reactions of stannylated and lithiated amines with coppersalts (halogenides, thiocyanates) lead to amido and imido bridged complexes which contain one to twelve metal atoms. [{Li(OEt₂)}₂][Cu(NPh₂)₃] ( 1 ) results from the reaction of CuCl with LiNPh₂ in the presence of trimethylphosphine. With N(SnMe₃)₃, CuCl reacts to the donor‐acceptor complex [ClCuN(SnMe₃)₃] ( 2 ) that is transformed into the tetrameric complex [{CuN(SnMe₃)₂}₄] ( 3 ) by thermolysis. 3 can also be obtained by the reaction of LiN(SnMe₃)₂ with Cu(SCN)₂. While terminally bound in 1 , the amido ligand is μ₂‐bridging between copper atoms in compound 3 . The influence of the alkyl amide's leaving group can be seen from a comparison of the reactivity of Me₃SnNH^tBu and LiNH^tBu, respectively. With Me₃SnNH^tBu, CuCl₂ forms the polymeric compound [Cu₁₆(NH₂^tBu)₁₂Cl₁₆] ( 4 ) whereas in the case of LiNH^tBu with both CuCl and CuSCN, the complex [{CuNH^tBu}₈] ( 5 ) is obtained. The latter contains two planar Cu₄N₄‐rings similar to those in 3 . If a mesityl group is introduced at the lithium amide, different products are accessible. Both, CuBr and CuSCN, lead to the formation of [Li(dme)₃][Cu₆(NHMes)₃(NMes)₂] ( 6 ) whose anion consists of a prismatic copper core with μ₂‐bridging amido and μ₃‐bridging imido ligands. In the presence of PPh₄Cl, a mixture of Cu(SCN)₂ and LiNHMes enables an ortho‐metallation reaction that produces [PPh₃(C₆H₄)CuNHMes] ( 7 ). From the reaction of CuSCN with LiNHMes and LiNHPh either the dimeric complex [{[Li(dme)][Cu(NHMes)(NHPh)]}₂] ( 8 ) or the cluster [{Li(dme)₃}₃][Li(dme)₂][Cu₁₂(NPh)₈] ( 9 ) results. The anion in 9 exhibits a cubo‐octahedron of copper atoms μ₃‐bridged by (NPh)^2–‐ligands. The solid state structures of compounds 1 – 9 have been determined by single crystal X‐ray diffraction.     

Synthesis and Crystal Structure of the two Lithium Hypersilylcuprates LiCu2[Si(SiMe3)3]3 and [Li7(OtBu)6][Cu2{Si(SiMe3)3}3]

The two hypersilylcuprates LiCu₂Hyp₃ ( 2 ) and [Li₇(O^tBu)₆][Cu₂Hyp₃] ( 3 ) (Hyp = Si(SiMe₃)₃) were synthesized by reactions of unsolvated lithium hypersilanide, LiHyp with hypersilylcopper and CuO^tBu, respectively. Both contain the novel A‐frame trihypersilyldicuprate anion [Cu₂Hyp₃]^–. In the former case a molecular compound is produced containing intimate ion pairs. In the latter case the cuprate anion and the unique large [Li₇(O^tBu)₆]⁺ cation form a salt‐like compound, only sparingly soluble in unpolar solvents. According to NBO analyses the bonding within the trihypersilyldicuprate moiety is best described by interaction of a bridging lewis‐basic hypersilanide anion with two lewis‐acidic hypersilyl copper fragments.     

PPh4{MoNCI3[N(SiMe3)2]}, ein Nitrido-Amido-Komplex von MoIybdän(VI)

Inhaltsübersicht. PPh₄{MoNCl₃[N(SiMe₃)₂]} entsteht aus PPh₄[MoNCl₄] und N,N,N′-Tris-(trimethylsilyl)benzamidin in siedendem Dichlormethan in Form bernsteinfarbener Kristalle, die wir IR-spektroskopisch und durch eine röntgenographische Strukturanalyse charakterisiert haben. Raumgruppe P2₁/n, Z = 4, R = 4,3% für 5168 unabhängige beobachtete Reflexe. Die Gitterkonstanten betragen für ?65°C: A = 918,9; b = 2850,5; c = 1353,9 pm; β = 107,51°. Die Verbindung besteht aus PPh₄⁺-Ionen und Anionen [MoNCl₃[N(SiMe₃)₂]}^–, in denen das Molybdänatom verzerrt tetragonal-pyramidal von dem Nitridoliganden in Apical-Position (r MoN = 165 pm), von drei Chloratomen und von dem N-Atom des Bis(trimethylsilyl)amido-Liganden (r MoN = 194 pm) umgeben ist. Das N-Atom des Amido-Liganden besitzt eine planare Umgebung. PPh₄{MoNCl₃[N(SiMe₃)₂]}, a Nitrido Amido Complex of Molybdenum (VI) PPh₄{MoNCl₃[N(SiMe₃)₂}] has been prepared by the reaction of PPh₄[MoNCl₄] with N,N,N′-Tris(trimethylsilyl)benzamidine in boiling dichloromethane, forming amber coloured crystals, which were characterized by their IR spectrum as well as by an X-ray structure determination. Space group P2₁/n, Z = 4, R = 0.043 for 5168 observed independent reflexions. The lattice dimensions are at ?65°C: A = 918.9; b = 2850.5; c = 1353.9 pm; β = 107.51°. The compound consists of PPh₄⁺ ions and anions {MoNCl₃[N(SiMe₃)₂]}^– in which the complex molybdenum anion forms a distorted tetragonal pyramid with the nitrido ligand (r MoN 165 pm) in the apical position and the chlorine atoms along with the nitrogen atom of the amido ligand (r MoN 194 pm) in the basical positions. The N atom of the amido ligand has a planar geometry.     

Münzmetallcluster mit verbrückenden Imido‐ und Amidoliganden: [{Li(dme)3}4][Cu18(NPh)11] und [Ag6(NHPh)4(PnPr3)6Cl2]

Copper and Silver Clusters with Bridging Imido and Amido Ligands From the reactions of copper and silver chloride with tertiary phosphines and lithiated aniline the compounds [{Li(dme)₃}₄][Cu₁₈(NPh)₁₁] ( 1 ) and [Ag₆(NHPh)₄(PⁿPr₃)₆Cl₂] ( 2 ) were obtained. The structure of the anion in 1 is closely related to the structures of the reported clusters [Cu₁₂(NPh)₈]^4– [1] and [Cu₂₄(NPh)₁₄]^4– [2]: 1 represents the third phenyl imido bridged copper cluster which contains parallel Cu₃‐ and Cu₆‐planes. The dimeric compound 2 consists of two Ag₃ units with bridging phenyl amido ligands. Two chloride and six phosphine ligands complete the ligand sphere and shield the metal core effectively.     

Bis(N‐acetyltriethylphosphaniminium)‐tetraacetato‐dichloro‐dicuprat(II), [MeC(O)N(H)PEt3]2[Cu2(O2C–Me)4Cl2]

Bis(N‐acetyltriethylphosphaneiminium)‐tetraacetato‐dichloro‐dicuprate(II), [MeC(O)N(H)PEt₃]₂[Cu₂(O₂C–Me)₄Cl₂] The title compound has been prepared by the reaction of Me₃SiNPEt₃ with [Cu₂(O₂C–Me)₄] and MeC(O)Cl in dichloromethane solution to give colourless crystals which include four molecules CH₂Cl₂ per formula unit. The complex is characterized by IR spectroscopy and by a crystal structure determination. [MeC(O)N(H)PEt₃]₂[Cu₂(O₂C–Me)₄Cl₂] · 4 CH₂Cl₂: Space group P2₁/n, Z = 2, lattice dimensions at –70 °C: a = 794.1(1), b = 2356.9(6), c = 1327.3(2) pm; β = 91.00(1)°; R₁ = 0.0597. The structure consists of N‐acetyltriethylphosphaneiminium cations and dianions [Cu₂(O₂C–Me)₄Cl₂]^2– which form an iontriple with N–H…Cl hydrogen bridges.     

Synthesen und Molekülstrukturen von [Cu20Ga10Cl4Se23(PEt2Ph)12] und [Cu14In6Se7(iPrSe)18]

Syntheses and Structures of [Cu₂₀Ga₁₀Cl₄Se₂₃(PEt₂Ph)₁₂] and [Cu₁₄In₆Se₇(iPrSe)₁₈] CuCl and GaCl₃ react with Se(SiMe₃)₂ in thf solution to yield in the presence of PEt₂Ph [Cu₂₀Ga₁₀Cl₄Se₂₃(PEt₂Ph)₁₂] ( 1 ). Reaction of CuCl, InCl₃ and TMEDA with iPrSeSiMe₃ in DME results in the crystallisation of [Cu₁₄In₆Se₇(iPrSe)₁₈] ( 2 ). The structures of 1 and 2 were determined by X‐ray single crystal structure analysis and display two new types of molecular clusters formed by the elements of group 11, 13, and 16. However, both cluster structures show no analogy to the structures of the related bulk phases.