Biodegradable polycarbonates containing side carboxyl groups—synthesis,properties, and degradation study

The main objective of the presented research was to synthesise biodegradable aliphatic polycarbonates containing reactive carboxyl pendant groups and to examine the influence of the copolymer chain microstructure and composition on the process of their hydrolytic degradation and cytocompatibility. The work describes copolymerization of cyclic trimethylene carbonate derivative containing benzyl‐ester pendant group (benzyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate) with trimethylene carbonate. The copolymerization was conducted with the use of zinc (II) and lanthanum (III) acetylacetonates as ring‐opening polymerization coordination initiators. Detailed NMR analysis allowed to define the microstructure of the obtained copolymers, which depended on the composition and type of used initiator. The final tapered chain microstructure of the obtained copolymers was related to huge differences in comonomers reactivity and evidenced low level of transesterification of the main copolymer backbone. Chosen copolymers, with unprotected carbonyl groups, were subjected to in vitro degradation test and cytocompatibility studies. It was found that high concentration of carboxyl groups resulted in copolymers which formed hydrogels and were very prone to hydrolytic degradation; they were also cytotoxic toward osteoblast‐like MG 63 cells. Copolymers with lower content of carboxyl groups were found less susceptible to degradation and cytocompatible with studied cells. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2756–2769     

Synthesis and fluorescence properties of dysprosium‐coordinated with high‐Tg polyaryletherketones containing carboxyl side groups

A series of novel dysprosium coordination polymers were synthesized using new high‐T_g carboxyl‐containing polyaryletherketones (PEKs) as macromolecular ligands and a small molecule, 1,10‐phenanthroline, as co‐ligand. The FTIR, WAXD, and UV–Vis results indicated that the dysprosium ions were coordinated simultaneously with carboxyl group of PEKs and 1,10‐phenanthroline, and homogeneously distributed along the polymer backbone. These obtained dysprosium coordination polymers showed excellent film‐formation properties. Moreover, all the dysprosium coordination polymers could exhibit the intense characteristic emission of dysprosium ions under UV excitation. Meanwhile, the emission intensity increased with increasing dysprosium ion content, and no obvious fluorescence quenching happened at the Dy³⁺ ion content up to 10.71 wt%, which was attributed to the very rigid structure of PEK and synergistic coordination effect of PEK and 1,10‐phenanthroline. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(phenylacetylenes) featuring activated ester side groups

Four monomers based on 4‐ethynylbenzoic acid have been synthesized, one of those featuring an activated ester. With the metathesis catalytic system WCl₆/Ph₄Sn, these acetylenic monomers could successfully be polymerized yielding conjugated polymers with molecular weights of around 10,000 to 15,000 g/mol and molecular weight distributions M_w/M_n ≤ 2.1. Also the copolymerization of phenylacetylene or methyl 4‐ethynylbenzoate with pentafluorophenyl 4‐ethynylbenzoate as reactive unit was conducted. Polymer analogous reactions of the reactive polymers and copolymers with amines have been investigated and it was found that poly(pentafluorophenyl 4‐ethynylbenzoate) featured a significant reactivity, such that reactions proceeded quantitatively even with aromatic amines. Moreover the UV‐Vis spectra of the activated ester based polymer before and after conversion with aliphatic amines showed a change, indicating an effect on the conjugated backbone of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of bipolar copolymers containing oxadiazole and carbazole pendant groups and their application to electroluminescent devices

A series of random copolymers POC10{Poly(2,5‐bis[(5‐decyloxy‐phenyl)‐1,3,4‐oxadiazole]styrene)}‐co‐Poly(N‐vinylcarbazole) (PVK) with different nvk content were synthesized through common radical polymerization and were incorporated into light emitting diodes as emitting layers. The structures and properties of the copolymers were characterized and evaluated by GPC, TGA, DSC, UV, PL, CV, and EL analyses. All the polymers enjoy high thermal stability. Cyclic voltammetry revealed that, with the incorporation of N‐vinylcarbazole to the copolymer, these copolymers had high‐lying HOMO energy values, which facilitated hole injection. PL peaks in the film show blue‐shift compared with those in solutions and fluorescent quantum efficiency decreased with the nvk content increasing, which supported the efficient energy transfer from nvk units to the oxadiazole units. Single‐layer LEDs with the configuration of ITO/PEDOT/PC10‐nvk/Mg:Ag/Ag were fabricated, which emit a blue light around 440 and 490 nm with a maximum brightness of 675.3 cd/m² and luminous efficiency of 0.108 cd/A. Moreover, we fabricated electrophosphorescent device from bipolar transport copolymer PC10‐nvk4 as host material and an orange‐light‐emitting iridium phosphor IrMDPP as guest. The maximum luminous efficiency of 0.548 cd/A was obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5452–5460, 2008     

Obtaining aliphatic branched polycarbonates via simple copolymerization of trimethylene carbonate with cyclic carbonate containing pendant ester groups

Different possibilities for obtaining branched, functional carbonate copolymers are presented in this study. Copolymers were synthesized according to the ring‐opening polymerization (ROP) of the cyclic carbonate monomers, containing pendant ester groups. As an example, we chose copolymerization of ethyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate (MTC‐Et) with trimethylene carbonate (TMC), using zinc (II) and lanthanum (III) acetylacetonates as ROP initiators. The transesterification processes of ester groups in pendant, short chains, appearing during conducted copolymerization, led to the establishment of two different fractions: first‐branched and high molecular weight fraction and second‐linear and low molecular weight. The content of this high‐molecular‐weight fraction increased with both: the amount of MTC‐Et in started reaction mixture and the time of conducted copolymerization. Reactivity constants in studied reaction were determined. It was possible to obtain the copolymer fraction (ca. 30%) with molecular weight of up to a million g/mol, with a highly branched chain microstructure using lanthanum (III) acetylacetonate as initiator. Conclusions were based on detailed NMR analysis, determining microstructure of the copolymer chains and additionally on GPC and DSC measurement. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 808–819     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic carbonate structure

A styrene‐based monomer having a five‐membered cyclic carbonate structure, 4‐vinylbenzyl 2,5‐dioxoran‐3‐ylmethyl ether (VBCE), was prepared by lithium bromide‐catalyzed addition of carbon dioxide to 4‐vinylbenxyl glycidyl ether (VBGE). Radical polymerization of the obtained VBCE was carried out using 2,2′‐azobisisobutyronitrile as an initiator. PolyVBCE with number‐averaged molecular weight higher than 13,800 was obtained by a solution polymerization in N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, and methyl ethyl ketone. The glass transition temperature and 5 wt % decomposition temperature of the polyVBCE were determined to be 52 and 305 °C by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBCE repeating unit can be also obtained via chemical modification of polyVBGE, that is, a lithium‐bromide‐catalyzed addition of carbon dioxide to a polyVBGE prepared from a radical polymerization of VBGE. Further copolymerization of VBCE with styrene gave the corresponding copolymer in a high yield. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and photophysical properties of polyethylene containing pyrenyl units in the side chain

Copolymerization of ethylene and diallyl‐bis(pyren‐1‐yl)‐silane (APyS) was investigated with zirconocene catalysts, rac‐ethylenebis(indenyl)zirconium dichloride ( 1 ) and diphenylmethylene(cyclopentadienyl)(9‐fluorenyl)zirconium dichloride ( 2 ), using methylaluminoxane as a cocatalyst. APyS was copolymerized via both 1,2‐insertion and cyclization insertion, and cyclization selectivity, ratio of cyclized insertion unit, of APyS in the copolymers obtained with Catalyst 1 was higher than that obtained with Catalyst 2 . Catalyst 2 showed a higher reactivity for APyS than Catalyst 1 . Photophysical properties of the copolymer were investigated by UV–vis and photoluminescence (PL) spectroscopy, and absorption and fluorescence derived from pyrenyl groups were detected in the copolymers. Chloroform solution of the copolymer showed emission derived from both monomer and eximer of pyrenyl units. Only the emission derived from eximer of pyrenyl units was observed in the cast film. The polarized PL spectrum of an oriented film showed anisotropy, and the polarization excitation parallel to the drawing direction showed high fluorescence intensity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of star oligo/poly(2,2‐dimethyltrimethylene carbonate)s containing cholic acid moieties

Star oligo/poly(2,2‐dimethyltrimethylene carbonate)s containing cholic acid moieties were synthesized through the ring‐opening polymerization of 2,2‐dimethyltrimethylene carbonate (DTC) initiated by cholic acid with hydroxyl groups. Through the control of the feed ratio of the initiator cholic acid to the monomer DTC, a series of star oligomers/polymers with different molecular weights were obtained. The star oligomers/polymers were characterized with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, combined size exclusion chromatography/multi‐angle laser light scattering analysis, wide‐angle X‐ray scattering, polarizing light microscopy, and differential scanning calorimetry. Compared with linear poly(2,2‐dimethyltrimethylene carbonate), these star oligo/poly(2,2‐dimethyltrimethylene carbonate)s had much faster hydrolytic degradation rates. With one of the star oligomers/polymers, a microsphere drug‐delivery system of a submicrometer size was fabricated with a very convenient ultrasonic dispersion method that did not involve toxic organic solvents. The in vitro drug release was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6688‐6696, 2006     

Enzymatic syntheses of unsaturated polyesters based on isosorbide and isomannide

The search for materials produced from renewable sources aiming at the substitution of petroleum‐based derivates is an area of intense investigation. In this work, the enzymatic copolymerization of isosorbide or isomannide with diethyl adipate and fractions of different unsaturated diesters (diethyl itaconate, diethyl fumarate, diethyl glutaconate, and diethyl hydromuconate) were examined using CAL‐B as catalyst. The polyesters prepared using one‐step syntheses were characterized by SEC, NMR, and MALDI‐TOF MS. In addition, syntheses with linear diols were carried out in bulk to evaluate the reactivity of cyclic diols in producing unsaturated polyesters using enzymatic catalysis, as well as to evaluate the occurrence of addition side reactions on the double bonds. Isosorbide and isomannide yielded unsaturated polymers with values in the order of 4,000‐16,000 when fumarate or glutaconate esters were added in 5 mol % ratio against adipate. In all cases MALDI‐TOF confirmed the presence of unsaturated units. Although these polyesters have unreacted double bonds they are prone to crosslinking and ready to further functionalization, like anchoring bioactive molecules. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3881–3891     

Poly(methyl methacrylate) copolymers containing multiple,pendent plasticizing groups

New ether dimer (ED‐Eh) and diester (EHDE) derivatives of α‐(hydroxymethyl)acrylate, each having two 2‐ethylhexyl side chains, and an amine‐linked di(2‐ethylhexyl)acrylate (AL‐Eh), having three 2‐ethylhexyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature, T_g. The free radical polymerizations of these monomers yielded high‐molecular–weight polymers. Cyclopolymer formation of ED‐Eh and AL‐Eh was confirmed by ¹³C NMR analysis and the cyclization efficiencies were found to be very high (～100%). Copolymers of ED‐Eh, EHDE, and AL‐Eh with methyl methacrylate (MMA) showed significant T_g decreases over poly(methyl methacrylate) (PMMA) due to 2‐ethylhexyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of 2‐ethylhexyl methacrylate, ED‐Eh, EHDE, and AL‐Eh with MMA revealed that the impacts of these monomers on depression of T_g's are identical with respect to the total concentration of the pendent groups. This is consistent with an earlier study involving copolymers of monomers comprising one and two octadecyl side groups with MMA. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the 2‐ethylhexyl pendent groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2302–2310, 2010     

Synthesis and characterization of novel poly(ester carbonate)s based on pentaerythritol

Novel poly(ester carbonate)s were synthesized by the ring‐opening polymerization of L ‐lactide and functionalized carbonate monomer 9‐phenyl‐2,4,8,10‐tetraoxaspiro[5,5]undecan‐3‐one derived from pentaerythritol with diethyl zinc as an initiator. ¹H NMR analysis revealed that the carbonate content in the copolymer was almost equal to that in the feed. DSC results indicated that T_g of the copolymer increased with increasing carbonate content in the copolymer. Moreover, the protecting benzylidene groups in the copolymer poly(L ‐lactide‐co‐9‐phenyl‐2,4,8,10‐tetraoxaspiro[5,5]undecan‐3‐one) were removed by hydrogenation with palladium hydroxide on activated charcoal as a catalyst to give a functional copolymer, poly(L ‐lactide‐co‐2,2‐dihydroxylmethyl‐propylene carbonate), containing pendant primary hydroxyl groups. Complete deprotection was confirmed by ¹H NMR and FTIR spectroscopy. The in vitro degradation rate of the deprotected copolymers was faster than that of the protected copolymers in the presence of proteinase K. The cell morphology and viability on a copolymer film evaluated with ECV‐304 cells showed that poly(ester carbonate)s derived from pentaerythritol are good biocompatible materials suitable for biomedical applications. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45:1737 –1745, 2007     

Copolymerization of carbon dioxide and propylene oxide with Ln(CCl3COO)3‐based catalyst: The role of rare‐earth compound in the catalytic system

A highly alternative copolymer of carbon dioxide and propylene oxide was obtained using a lanthanide trichloroacetates‐based ternary catalyst. The rare‐earth compound in the ternary catalyst was critical to dramatically raise the yield and molecular weight of the copolymer in addition to maintaining a high alternating ratio of the copolymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2751–2754, 2001     

Syntheses,characterization, and functionalization of poly(ester amide)s with pendant amine functional groups

Poly(ester amide)s (PEAs) comprising α‐amino acids, diols, and diacids are promising materials for biomedical applications such as tissue engineering and drug delivery because of their tunability and potential for either hydrolytic or enzymatic degradation. Although a number of PEAs of different compositions have been reported, there is a significant need for the incorporation of amino acids with functional side chains. This will allow for the conjugation of drugs or cell signaling molecules in tissue engineering scaffolds, thus expanding the potential applications of these materials. The objective of this work was the incorporation of l ‐lysine into PEAs to provide functionalizable pendant amine groups. Thus, varying percentages of lysine were incorporated into PEAs comprised of l ‐phenylalanine, 1,4‐butanediol, and succinic acid by tuning the ratio of ε‐protected‐l ‐lysine and l ‐phenylalanine derived monomers. The polymers were characterized by nuclear magnetic resonance spectroscopy, infrared spectroscopy, size exclusion chromatography, and differential scanning calorimetry. The lysine ε‐protecting group was removed, then the reactivity of the pendant amines was demonstrated by reaction with amino acid and tri(ethylene glycol) derivatives. The degradation of thin films of polymers were studied using scanning electron microscopy and the incorporation of lysine was found to significantly accelerate both the hydrolytic and enzymatic degradation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6376–6392, 2008     

Synthesis of polyoxazolines using glycerol carbonate derivative and end chains functionalization via carbonate and isocyanate routes

We report the cationic ring‐opening polymerization of 2‐methyl‐2‐oxazoline (MOx) using bio‐based initiator (GCTs). The functional initiator GCTs was prepared by tosylation of the corresponding alcohol: glycerol carbonate (GC). The termination stage of the polymerization was achieved in presence of KOH and the telechelic polyoxazoline carrying five‐membered cyclic carbonate and oxazolium end groups (GC‐POx^ium) was converted to ((HO)₂‐POx‐OH) carrying α‐diol and ω‐hydroxyl groups. End‐functionalized polyoxazolines (HO)₂‐POx‐OH with M_n ranging from 4200 to 8400 g mol^?1 were synthesized. According to GPC results, the polymerizations of MOx using GCTs and other initiator coming from 1,2‐isopropylidene‐glycerol (Solk‐Ts) were compared. On the basis of FTIR and NMR spectroscopies, the chemical modification of end chains of polyoxazolines was investigated by two alternative synthetic routes. The isocyanate route is a postpolymerization urethanization. The nucleophilic reactivity of the α‐diol and ω‐hydroxyl groups of (HO)₂‐POx‐OH was studied with functional isocyanate (TESPI). In the carbonate route, the electrophilic reactivity of α‐ and ω‐end groups of GC‐POx^ium were explored with amine. It was demonstrated that during the termination stage of the polymerization in presence of allylamine both urethane linker in α‐end chain was synthesized and the ω‐oxazolium group was converted into terminal amine. The carbonate route is an alternative to synthesize urethane without isocyanate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4027–4035, 2010     

Synthesis and properties of polyurethanes bearing urethane moieties in the side chain

Polyurethanes bearing urethane groups in the side chains were prepared by the addition of isocyanates to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate. The resulting polyurethane had a higher glass transition temperature than the original poly(hydroxyurethane), although its esterified product had a lower glass transition temperature. The urethanization with 3‐(triethoxysilyl)propyl isocyanate also proceeded effectively to afford both soluble and insoluble polymers, depending on the reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3408–3414, 2007     

New fluorene‐based copolymers containing oxadiazole pendant groups: Synthesis,characterization, and polymer stability

A series of fluorene‐based copolymers containing hole blocking/electron transporting diphenyloxadiazole units were synthesized by means of Suzuki‐Miyaura coupling of selected aromatic dibromo‐ and diboronato‐ derivatives catalyzed with a Pd(PPh₃)₄ catalyst. All of the copolymers with various composition of main‐chain units were characterized by SEC chromatography, NMR, UV–vis, fluorescence and IR spectroscopy, and DSC. The emission stability of fluorene copolymers was improved by the replacement of alkyl groups on the C‐9 carbon of fluorene with aryl groups or by the incorporation of anthracene units into the copolymer main chain. A comparison of luminescence properties of pristine and annealed thin layers of studied copolymers was performed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4532–4546, 2009     

Preparation of polymer/silica composite nanoparticles bearing carboxyl groups on the surface via emulsifier‐free emulsion copolymerization

Polymer/silica organic/inorganic composite nanoparticles bearing carboxyl groups on the surface were prepared via the emulsifier‐free emulsion copolymerization of methyl methacrylate and sodium methacrylate (NaMA). Carboxyl groups were generated by the addition of hydrochloric acid at the end of the copolymerization. Two methods of NaMA addition were studied: batch and two‐stage procedures. The batch procedure allowed only a limited number of carboxyl groups to effectively bond to the composite nanoparticles. In contrast, the number of carboxyl groups could be altered over a wide range with the two‐stage procedure. Fourier transform infrared spectroscopy and chemical titration were independently used to quantify the number of carboxyl groups, giving values close to each other and to the feed. A kinetic study indicated that the copolymerization followed a mechanism different than that found earlier. The average size of the composite nanoparticles was approximately 40 nm, as measured by both transmission electron microscopy (TEM) and laser scattering, and their polydispersity index was close to 1, indicating a fairly narrow size distribution. TEM photographs of the composite nanoparticles showed a multilayered core–shell structure with one silica bead as the core and with poly(methacrylate acid) as the outmost shell. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2826–2835, 2005     

Synthesis and photovoltaic properties of conjugated copolymers based on benzimidazole and various thiophene

A new accepter unit, dimethyl‐2H‐benzimidazole, was prepared and used for the synthesis of the conjugated polymers containing electron donor–acceptor pair for organic photovoltaics (OPVs). Dimethyl‐2H‐benzimidazole unit was designed to substitute the BT unit of poly(N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)) (PCDTBT). A series of new semiconducting polymers with 2,2‐dimethyl‐2H‐benzimidazole, 9‐heptadecanyl‐9H‐carbazole, and thiophene (or bithiophene) units was synthesized using Stille polymerization to generate PCDTMBIs (or PCBBTMBIs). In dimethyl‐2H‐benzimidazole, the sulfur at 2‐position of BT unit was replaced with dialkyl substituted carbon, while keeping the 1,2‐quinoid form, to improve the solubility of the polymers. The absorption spectra of PCDTMBIs with thiophene units exhibit two maximum peaks at about 430 and 613–645 nm in solution. The solutions of PCBBTMBIs show two absorption peaks at about 445–456 and 630–645 nm which is red‐shifted about 20 nm when compared with PCDTMBIs caused by the introduction of bithiophene units. In most efficient polymer PCBBTMBI3, the device annealed at 100 °C for 10 min demonstrated a V_OC value of 0.60 V, a J_SC value of 4.31 mA/cm², and a FF of 0.35, leading to the power conversion efficiency (PCE) of 0.91%, under white light illumination (AM 1.5 G and 100 mW/cm²). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and photovoltaic properties of conjugated side chains polymers with different electron‐withdrawing and donating end groups

A series of novel low band gap polymers containing conjugated side chains with 4,7‐dithien‐5‐yl‐2,1,3‐benzodiathiazole and different electron‐withdrawing end groups of aldehyde ( PT‐DTBTCHO ), 2‐ethylhexyl cyanoacetate ( PT‐DTBTCN ), 1,3‐diethyl‐2‐thiobarbituric acid ( PT‐DTBTDT ), and electron‐donating end group of 2‐methylthiophene ( PT‐DTBTMT ) have been designed and synthesized. All polymers exhibit good solubility in common organic solvents, film‐forming ability, and thermal stability. These conjugated polymers show the broad ultraviolet‐visible absorption and the narrow optical band gaps in the range of 1.65–1.90 eV. Through changing the end group of conjugated side chains, the photophysical properties and energy levels of the polymers were tuned effectively. Bulk heterojunction solar cells based on the blend of these polymers and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) reached the best power conversion efficiency (PCE) of 2.72%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012