N‐(2‐Hydroxyethyl)‐N‐methyldithiocarbamato Complexes of Nickel(II) with Phosphorus Donor Ligands

Planar nickel(II) complexes involving N‐(2‐Hydroxyethyl)‐N‐methyldithiocarbamate, such as [NiX(nmedtc)(PPh₃)] (X = Cl, NCS; PPh₃ = triphenylphosphine), and [Ni(nmedtc)(P‐P)]ClO₄(P‐P = 1,1‐bis(diphenylphosphino)methane(dppm); 1,3‐bis(diphenylphosphino)propane (1,3‐dppp); 1,4‐bis(diphenylphosphino)butane(1,4‐dppb) have been synthesized. The complexes have been characterized by elemental analyses, IR and electronic spectroscopies. The increased νC–N value in all the complexes is due to the mesomeric drift of electrons from the dithiocarbamate ligands to the metal atom. Single crystal X‐ray structure of [Ni(nmedtc)(1,3‐dppp)]ClO₄·H₂O is reported. In the present 1,3‐dppp chelate, the P–Ni–P angle is higher than that found in 1,2‐bis(diphenylphosphino)ethane‐nickel chelates and lower than 1,4‐bis(diphenylphosphino)butane‐nickel chelates, as a result of presence of the flexible propyl back bone connecting the two phosphorus atoms of the complex.     

Synthesis,Spectral, Cyclic Voltammetric Studies,and Single Crystal X‐Ray Structure Determination of the Planar NiS2P2, NiS2PN,and NiS2PC Chromophores

Synthesis, spectral and cyclic voltammetric characterization of [Ni(dedtc)(4‐MP)₂](ClO₄) ( 1 ), [Ni(dedtc)(4‐MP)(NCS)]( 2 ), [Ni(dedtc)(PPh₃)(NCS)] ( 3 ) and [Ni(dedtc)(PPh₃)(CN)] ( 4 ) (dedtc = diethyldithiocarbamate, 4‐MP = tri(4‐methylphenyl)phosphine, PPh₃ = triphenylphophine) are reported. IR spectra of complexes 1‐4 show the characteristic thioureide (C‐N) bands at higher wave numbers compared to that of the parent dithiocarbamate complex [Ni(dedtc)₂]. The d‐d transitions are observed in the region 452—482 nm. The CV studies clearly show the presence of reduced electron density on the nickel ions in mixed ligand complexes 1‐4 compared to the parent dithiocarbamate. Single crystal X‐ray structure studies show all the complexes to containplanar NiS₂P₂, NiS₂PN, and NiS₂PC chromophores in keeping with the observed diamagnetism. In all the complexes the Ni‐S distances are asymmetric. The thioureide C‐N distance of the complexes 1‐4 are less thanthe C‐N distance observed in the parent [Ni(dedtc)₂].     

trans Influence and Steric Effect on the Distortions in Planar NiS4, NiS2PN,and NiS2P2 Chromophores

The planar diamagnetic complexes [Ni(achdtc)₂] ( 1 ),[Ni(achdtc)(PPh₃)(NCS)] ( 2 ), and [Ni(achdtc)(PPh₃)₂]ClO₄ · 0.5EtOAc ( 3 ) (achdtc = allylcyclohexylcarbodithioate) were prepared, characterized by elemental analysis, electronic, IR, NMR (¹H, ¹³C, and ³¹P) spectroscopy and the crystal structures were determined by single‐crystal X‐ray crystallography. The characteristic thioureide bands occur at 1478, 1503, and 1507 cm^–1 for 1 , 2 , and 3 , respectively and the corresponding ¹³C chemical shifts are observed at 207.67, 204.16, and 202.31 ppm. ³¹P chemical shifts are observed at δ = 29.24 and 22.73 ppm for 2 and 3 , respectively, indicating a strong interaction. Electronic spectral bands are observed at 480, 483, and 475 nm for 1 , 2 , and 3 , corresponding to d → d_xy/d transitions. Ni–S distances are asymmetric. The trans influence of PPh₃ elongates the Ni–S bonds. The decrease in the S–Ni–S bite angle in 2 [78.80(16)°] and in 3 [78.36(2)°] compared to that observed in 1 [79.42(3)°] is due to the steric crowding of PPh₃ around the central metal atom. A comparison of the bond parameters of compounds 1 – 3 shows a change in the arrangement from a planar NiS₄ chromophore to distorted planar NiS₂P₂ chromophores. The observed distortion from planar to tetrahedral arrangement is influenced by the bulky triphenylphosphine ligand.     

Symmetric Ni(II) dithiocarbamates with bidentate phosphines ligands

Ni(II) mononuclear dithiocarbamate complexes with bidentate P,P ligands of composition [Ni(R₂dtc)(P,P)]X {R?=?pentyl (pe), benzyl (bz); dtc?=?S₂CN^?; P,P?=?1,2-bis(diphenylphosphino)ethane (dppe), 1,4-bis(diphenylphosphino)butane (dppb), 1,1′-bis(diphenylphosphino) ferrocene (dppf); X?=?ClO₄, Cl, Br, NCS} and binuclear complexes of composition [Ni₂(μ-dpph)(R₂dtc)₂]X₂ with a P,P-bridging ligand {P,P?=?1,6-bis(diphenylphosphino)hexane (dpph); X?=?Cl, Br, NCS} have been synthesized. The complexes have been characterized by elemental and thermal analysis, IR, electronic and ³¹P{¹H}-NMR spectroscopy, magnetochemical and conductivity measurements. Single crystal X-ray analysis of [Ni(pe₂dtc)(dppf)]ClO₄ confirmed a distorted square planar coordination in the NiS₂P₂ chromophore. For selected samples, the catalysis of graphite oxidation was studied.     

Trans influence of triphenylphosphines and pseudohalogens on Ni-S bonds: Synthesis, spectral and single crystal X-ray structural studies on NiS2PN and NiS2PC chromophores

Trans influence of triphenylphosphines and pseudohalogens on Ni-S bonds of NiS₂PN and NiS₂PC chromophores has been investigated by synthesizing and characterizing them. The complexes show the characteristic thioureide IR band at ∼ 1530 cm⁻¹. Electronic spectrum of the cyanide analogue shows a strong blue shift relative to others. X-ray structures of [Ni(pipdtc)(4-MP)(NCS)] (1), [Ni(pipdtc)(PPh₃)(NCS)] (2) and [Ni(pipdtc)(PPh₃)(CN)] (3) (pipdtc = piperidinecarbodithioate anion, 4-MP = tri(4-methylphenyl)phopshine) are reported. Ni-S bond distance trans to 4-MP(1) is longer than the distances in (2) and (3) and Ni-S bond distances trans to Ni-NCS/CN decrease as follows: (3) > (2) > (1). Particularly, 4-MP shows a highly significant trans influence than triphenylphosphine on Ni-S bond. Similarly, CN⁻ exerts a marginally significant trans influence compared to NCS-. Thioureide C-N distances are relatively very short due to the drift of electron density towards the metal. The Ni-N-C angle (163.5(2)°) observed in (2) indicates deviation from linearity to a larger extent compared to that in (1) (176.3(3)°) due to the steric effect of the 4-methyl group. The reduction potentials (CV) for the mixed ligand complexes are much less compared to that of the parent NiS₄ chromophore due to the π-acidic phosphines.      

Heteronuclear Nickel‐Iron Complexes and the Crystal Structure of [Fe2(CO)6(μ3‐S)2{Ni(dppe)}]

A series of heteronuclear nickel‐iron complexes [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(PPh₃)₂}] ( 1 ), [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(dppe)}] ( 2 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(PPh₃)₂}] ( 3 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(dppe)}] ( 4 ) and [Fe₂(CO)₆(μ‐SPh)(μ₃‐S){NiCl(dppe)}] ( 5 ) have been prepared. The structure of 4 has been determined by X‐ray crystallography. The central metal‐sulfur core of 4 has a trigonal bipyramidal shape with a NiFe₂ base plane with two axial sulfur atoms. Each iron atom is 5‐coordinate forming a distorted square pyramid; the nickel is square planar coordinated by two sulfur atoms and two phosphorus atoms.     

Rhodium Complexes Containing O‐Bonded NHxMe2−xCHO (x=0, 1, 2): X‐Ray Structure of [Rh(PPh3)3(OCHNHMe)]ClO4

Displacement of norbornadiene (nbd; bicyclo[2.2.1]hepta‐2,5‐diene) from [Rh(PPh₃)₂(nbd)]ClO₄ by hydrogenation in the presence of PPh₃ and formamide or Me‐substituted derivatives, results in the formation of O‐bonded formamide complexes [Rh(PPh₃)₃(OCHNH_xMe_2−x)]ClO₄ (x=0, 1, 2) rather than N‐bonded derivatives. These have been characterised by spectroscopic measurements and, in the case of [Rh(PPh₃)₃(OCHNHMe)]ClO₄, by X‐ray crystallography. All undergo oxidative addition with H₂, and the rates of ligand exchange in the Rh^I and Rh^III complexes have been determined by magnetisation‐transfer measurements.     

[Bis(2‐diphenylphosphinoethyl) sulfide‐κ3P,S,P′](triphenylphosphine‐κP)platinum(II) diperchlorate acetone solvate

In the title compound, [Pt(C₁₈H₁₅P)(C₂₈H₂₈P₂S)]­(ClO₄)₂·­C₃H₆O or [Pt(PPh₃)(PSP)](ClO₄)₂·CH₃COCH₃, where PSP is the potentially tridentate chelate ligand bis(2‐di­phenyl­phosphinoethyl) sulfide, all three donor groups of the PSP ligand are coordinated to the central Pt atom, with Pt—P = 2.310 (1) Å and Pt—S = 2.343 (1) Å. The fourth coordination site is occupied by the P donor of the tri­phenyl­phosphine ligand [Pt—P = 2.289 (1) Å]. The complex cation has exact mirror symmetry, with the S atom, the Pt atom and the P atom of the PPh₃ ligand in the mirror plane. The Pt atom has a distorted square‐planar coordination geometry. A π–π interaction is present between the phenyl rings of the PPh₃ ligand and the terminal –PPh₂ group of the PSP chelate.     

Variable Bonding Modes of Pyrimidine‐2‐thione in PdII/PtII Complexes [M(η2‐N,S‐pymS)(η1‐S‐pymS)(PPh3)] and [M(η1‐S‐pymS)2(L‐L)] (L‐L = dppm,dppe)

Reactions of pyrimidine‐2‐thione (HpymS) with Pd^II/Pt^IV salts in the presence of triphenyl phosphine and bis(diphenylphosphino)alkanes, Ph₂P‐(CH₂)_m‐PPh₂ (m = 1, 2) have yielded two types of complexes, viz. a) [M(η²‐N, S‐ pymS)(η¹‐S‐ pymS)(PPh₃)] (M = Pd, 1 ; Pt, 2 ), and (b) [M(η¹‐S‐pymS)₂(L‐L)] {L‐L, M = dppm (m = 1) Pd, 3 ; Pt, 4 ; dppe (m = 2), Pd, 5 ; Pt, 6 }. Complexes have been characterized by elemental analysis (C, H, N), NMR spectroscopy (¹H, ¹³C, ³¹P), and single crystal X‐ray crystallography ( 1 , 2 , 4 , and 5 ). Complexes 1 and 2 have terminal η¹‐S and chelating η²‐N, S‐modes of pymS⁻, while other Pd/Pt complexes have only terminal η¹‐S modes. The solution state ³¹P NMR spectral data reveal dynamic equilibrium for the complexes 3 , 5 and 6 , whereas the complexes 1 , 2 and 4 are static in solution state.     

On the Reaction of [(CO)3Fe(μ‐Me2NCO)2Fe(CO)2(NHMe2)] with Chelating Ligands — X‐Ray Structures of New Binuclear μ‐Carbamoyl Complexes

Reaction of the binuclear μ‐carbamoyl complex [(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)₂(HNMe₂)] ( 1 ) in toluene with the chelating ligands Ph₂PCH₂PPh₂ (dppm) and Ph₂PCH₂CH₂PPh₂ (dppe) gives different results. With dppm only the complex [(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)₂(dppm)] ( 3 ) with a dangling ligand is obtained under replacement of amine, whereas with dppe depending on the reaction conditions up to three compounds are found. A 1 : 1 mixture of the educts generates the related complex [(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)₂(dppe)] ( 4 ) together with the tetranuclear complex [{(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)₂}₂(dppe)] (5 ). 4 slowly converts into [(CO)₃Fe(μ‐Me₂NCO)₂Fe(CO)(dppe)] ( 6 ) with dppe acting as a chelating ligand. 6 is the first compound in this series in which one of the five CO groups is replaced by another donor. A 2 : 1 molar ratio of 1 and dppe quantitatively produces 5 . Addition of CO to a solution of 6 proceeds under slow reversible conversion of the complex into 4 . The compounds were characterized by the usual spectroscopic methods; 3 , 5 and 6 were also studied by X‐ray diffraction analyses.     

Gold(I) ‐Nickel(II)‐4,4′‐bpy‐Phosphine Complexes: Synthesis and Multinuclear NMR Study

Silver triflate [AgOTf] assisted de‐bromination gives [Ni(dppm/dppe/(PPh₃)₂) (OTf)₂], which on reaction with 4,4′‐bpy and gold(I) phosphines in dichloromethane medium by the self assemble technique leads to [{(L)Ni}{(4,4‐bpy)Au(PPh₃)}₂](OTf)₄, ( 1,2,3 ) [{(L)Ni(4,4‐bpy)}₄](OTf)₈, ( 4,5,6 ) [L = dppm/dppe/(PPh₃)₂ = diphenyl phosphino‐methane, ‐ethane, bis‐triphenylphosphine, OSO₂CF₃ is the triflate anion]. The maximum molecular peak of the corresponding molecule is observed in the ESI mass spectrum. Ir spectra of the complexes show ‐C=C‐, ‐C=N‐, as well as phosphine stretching. The ¹H NMR spectra as well as ³¹P (¹H)NMR suggest solution stereochemistry, proton movement, and phosphorus proton interaction. Considering all the moieties, there are a lot of carbon atoms in the molecule reflected by the ¹³C NMR spectrum. In the ¹H‐¹H COSY spectrum of the present complexes and contour peaks in the ¹H^?13C HMQC spectrum, we assign the solution structure and stereoretentive transformation in each step.     

Formation of an Acyl‐Ethynyl‐Methylidyne Complex of Cobalt: Structure of Co3{μ3‐CC(O)C≡C[Ru(dppe)Cp*]}(CO)8(PPh3)

The reaction between Ru(C≡CH)(dppe)Cp* and Co₃(μ₃‐CBr)(CO)₉ in the presence of Pd(PPh₃)₄/CuI afforded dark red Co₃{μ₃‐CC(O)C≡C[Ru(dppe)Cp*]}(CO)₈(PPh₃), whose formation may involve attack of the Ru‐ethynyl fragment on an intermediate cluster‐bound CCO ligand; abstraction of PPh₃ from the palladium catalyst also occurs.     

Synthesis, structures, and spectroscopic properties of copper(I) complexes bearing 7-acetamido-4-methyl-1,8-naphthyridin-2-carbaldehyde azine and 1,2-bis(diphenylphosphino)ethane ligands

A new ligand napaa (napaa = 7-acetamido-4-methyl-1,8-naphthyridin-2-carbaldehyde azine) and its two dinuclear copper(I) complexes, Cu₂(napaa)(dppe)₂(ClO₄)₂ (1) and Cu₂(napaa)(PPh₃)₄(BF₄)₂ (2) (dppe = 1,2-bis(diphenylphosphino)ethane) and PPh₃ = triphenylphosphine) were synthesized and characterized, and the structure of 1 was determined by X-ray crystal analysis. Each copper atom in 1 has a distorted tetrahedral geometry in which the metal center is associated to napaa and dppe ligands displaying chelating coordination modes and the naphthyridine rings of napaa are almost coplanar. The two complexes exhibit similar electronic absorption spectra with λ_max at about 366 nm, which can be tentatively assigned to metal-to-ligand charge-transfer (MLCT) transition. The assignment was further supported by density functional theory (DFT) calculations.      

Metal Derivatives of Heterocyclic‐2‐thiones: Crystal Structures of [Bis(diphenylphosphanyl)propane][bis(pyrimidine‐2‐thiolato)]ruthenium(II) and [Bis(diphenylphosphanyl)methane][bis(pyridine‐2‐thiolato)]ruthenium(II)

Ruthenium(II) Complexes containing pyrimidine‐2‐thiolate (pymS^–) and bis(diphenylphosphanyl)alkanes [Ph₂P–(CH₂)_m–PPh₂, m = 1, dppm; m = 2, dppe; m = 3, dppp; m = 4, dppb] are described. Reactions of [RuCl₂L₂] (L = dppm, dppp) and [Ru₂Cl₄L₃] (L = dppb) with pyrimidine‐2‐thione (pymSH) in 1:2 molar ratio in dry benzene in the presence of Et₃N base yielded the [Ru(pymS)₂L] complexes (pymS^– = pyrimidine‐2‐thiolate; L = dppm ( 1 ); dppp ( 3 ); dppb ( 4 )). The complex [Ru(pymS)₂(dppe)] ( 2 ) was indirectly prepared by the reaction of [Ru(pymS)₂(PPh₃)₂] with dppe. These complexes were characterized using analytical data, IR, ¹H, ¹³C, ³¹P NMR spectroscopy, and X‐ray crystallography (complex 3 ). The crystal structure of the analogous complex [Ru(pyS)₂(dppm)] ( 5 ) with the ligand pyridine‐2‐thiolate (pyS^–) was also described. X‐ray crystallographic investigation of complex 3 has shown two four‐membered chelate rings (N, S donors) and one six‐membered ring (P, P donors) around the metal atom. Compound 5 provides the first example in which Ru^II has three four‐membered chelate rings: two made up by N, S donor ligands and one made up by P, P donor ligand. The arrangement around the metal atoms in each complex is distorted octahedral with cis:cis:trans:P, P:N, N:S, S dispositions of the donor atoms. The ³¹P NMR spectroscopic data revealed that the complexes are static in solution, except 2 , which showed the presence of more than one species.     

Ni(II) complexes of unsymmetrical phenyl and phenethyl dithiocarbamates and triphenylphosphine

Unsymmetrical Ni(II) complexes of phenyl- and phenethyldithiocarbamate and PPh₃ of composition [NiX(HPhdtc)(PPh₃)], [NiX(HPhetdtc)(PPh₃)], [Ni(HPhdtc)(PPh₃)₂]ClO₄ and [Ni(HPhdtc)(PPh₃)₂]PF₆ {X?=?Cl, Br, I, NCS; HPhdtc?=?phenyldithiocarbamate, HPhetdtc?=phenethyldithiocarbamate, PPh₃?=?triphenylphosphine} have been synthesized. The complexes have been characterized by elemental and thermal analysis, IR and electronic spectroscopy, magnetochemical and conductivity measurements. Single-crystal X-ray analysis of [NiBr(HPhdtc)(PPh₃)]?·?CHCl₃ confirmed a distorted square planar coordination for the NiS₂PBr chromophore. For selected samples, the catalytic effects of graphite oxidation were studied.     

Koordinativ ungesättigte Dieisenkomplexe: Synthese und Kristallstrukturen von [Fe2(CO)4(μ‐H)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)] und [Fe2(CO)4(μ‐CH2)(μ‐H)(μ‐PtBu2)(μ‐Ph2PCH2PPh2)]

Coordinatively Unsaturated Diiron Complexes: Synthesis and Crystal Structures of [Fe₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] and [Fe₂(CO)₄(μ‐CH₂)(μ‐H)(μ‐P^tBu₂)(μ‐Ph₂PCH₂PPh₂)] [Fe₂(μ‐CO)(CO)₆(μ‐H)(μ‐P^tBu₂)] ( 1 ) reacts spontaneously with dppm (dppm = Ph₂PCH₂PPh₂) to give [Fe₂(μ‐CO)(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 2 c ). By thermolysis or photolysis, 2 c loses very easily one carbonyl ligand and yields the corresponding electronically and coordinatively unsaturated complex [Fe₂(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 3 ). 3 exhibits a Fe–Fe double bond which could be confirmed by the addition of methylene to the corresponding dimetallacyclopropane [Fe₂(CO)₄(μ‐CH₂)(μ‐H)(μ‐P^tBu₂)(μ‐dppm)] ( 4 ). The reaction of 1 with dppe (Ph₂PC₂H₄PPh₂) affords [Fe₂(μ‐CO)(CO)₄(μ‐H)(μ‐P^tBu₂)(μ‐dppe)] ( 5 ). In contrast to the thermolysis of 2 c , yielding 3 , the heating of 5 in toluene leads rapidly to complete decomposition. The reaction of 1 with PPh₃ yields [Fe₂(CO)₆(H)(μ‐P^tBu₂)(PPh₃)] ( 6 a ), while with ^tBu₂PH the compound [Fe₂(μ‐CO)(CO)₅(μ‐H)(μ‐P^tBu₂)(^tBu₂PH)] ( 6 b ) is formed. The thermolysis of 6 b affords [Fe₂(CO)₅(μ‐P^tBu₂)₂] and the degradation products [Fe(CO)₃(^tBu₂PH)₂] and [Fe(CO)₄(^tBu₂PH)]. The molecular structures of 3 , 4 and 6 b were determined by X‐ray crystal structure analyses.     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Synthese und Strukturen von [Cu8As3(AsSiMe3)2(dppb)4]+‐[Cu{As2(SiMe3)2}{As4(SiMe3)4}]‐, [Cu8As3(AsSiMe3)2(dppb)4]+‐[Cu{As(SiMe3)2}2]‐ und [Cu10(Sb3)2(SbSiMe3)2(dppm)6]

The reaction of CuCl, LiAs(SiMe₃)₂ and dppb (Bis(diphenylphosphino)butane) leads to the formation of ionic cluster complexes. Depending on the reaction conditions one can isolate [Cu₈As₃(AsSiMe₃)₂(dppb)₄]⁺[Cu{As₂(SiMe₃)₂}{As₄(SiMe₃)₄}]^‐ ( 1 ) and [Cu₈As₃(AsSiMe₃)₂(dppb)₄]⁺[Cu{As(SiMe₃)₂}₂]^‐ ( 2 ). The same reaction of CuCl, dppm (Bis(diphenylphosphino)methane) and LiSb(SiMe₃)₂ leads to the neutral cluster complex [Cu₁₀(Sb₃)₂(SbSiMe₃)₂(dppm)₆] ( 3 ). The structures of 1‐3 have been solved by X‐ray single crystal analyses.     

Hexanuclear Gold(I) Phosphide Complexes as Platforms for Multiple Redox‐Active Ferrocenyl Units

The synthesis, X‐ray crystal structures, electrochemical, and spectroscopic studies of a series of hexanuclear gold(I) μ₃‐ferrocenylmethylphosphido complexes stabilized by bridging phosphine ligands, [Au₆(P?P)_n(Fc‐CH₂‐P)₂][PF₆]₂ (n=3, P?P=dppm (bis(diphenylphosphino)methane) ( 1 ), dppe (1,2‐bis(diphenylphosphino)ethane) ( 2 ), dppp (1,3‐bis(diphenylphosphino)propane) ( 3 ), Ph₂PN(C₃H₇)‐PPh₂ ( 4 ), Ph₂PN(Ph‐CH₃‐p)PPh₂ ( 5 ), dppf (1,1′‐bis(diphenylphosphino)ferrocene) ( 6 ); n=2, P?P=dpepp (bis(2‐diphenylphosphinoethyl)phenylphosphine) ( 7 )), as platforms for multiple redox‐active ferrocenyl units, are reported. The investigation of the structural changes of the clusters has been probed by introducing different bridging phosphine ligands. This class of gold(I) μ₃‐ferrocenylmethylphosphido complexes has been found to exhibit one reversible oxidation couple, suggestive of the absence of electronic communication between the ferrocene units through the Au₆P₂ cluster core, providing an understanding of the electronic properties of the hexanuclear Au^I cluster linkage. The present complexes also serve as an ideal system for the design of multi‐electron reservoir and molecular battery systems.     

1, 9‐Dihydro‐purine‐6‐thione Derivatives of the d8–d10 Metal Ions (PdII,PtII, and CuI): Synthesis,Spectroscopy, and Structures

Reaction of 1, 9‐dihydro‐purine‐6‐thione (puSH₂) in presence of aqueous sodium hydroxide with PdCl₂(PPh₃)₂ suspended in ethanol formed [Pd(κ²‐N⁷,S‐puS)(PPh₃)₂] ( 1 ). Similarly, complexes [Pd(κ²‐N⁷,S‐puS)(κ²‐P, P‐L‐L)] ( 2 – 4 ) {L‐L = dppm (m = 1) ( 2 ), dppp (m = 3) ( 3 ), dppb (m = 4) ( 4 )} were prepared using precursors the [PdCl₂(L‐L)] {L‐L = Ph₂P–(CH₂)_m–PPh₂}. Reaction of puSH₂ suspended in benzene with platinic acid, H₂PtCl₆, in ethanol in the presence of triethylamine followed by the addition of PPh₃ yielded the complex [Pt(κ²‐N⁷,S‐puS)(PPh₃)₂] ( 5 ). Complexes [Pt(κ²‐N⁷,S‐puS)(κ²‐P, P‐L‐L)] ( 6 – 8 ) {L‐L = dppm ( 6 ), dppp ( 7 ), dppb ( 8 )} were prepared similarly. The 1, 9‐dihydro‐purine‐6‐thione acts as N⁷,S‐chelating dianion in compounds 1 – 8 . The reaction of copper(I) chloride [or copper(I) bromide] in acetonitrile with puSH₂ and the addition of PPh₃ in methanol yielded the same product, [Cu(κ²‐N⁷,S‐puSH)(PPh₃)₂] ( 9 ), in which the halogen atoms are removed by uninegative N, S‐chelating puSH^– anion. However, copper(I) iodide did not lose iodide and formed the tetrahedral complex, [CuI(κ¹‐S‐puSH₂)(PPh₃)₂] ( 10 ), in which the thio ligand is neutral. These complexes were characterized with the help of elemental analysis, NMR spectroscopy (¹H, ³¹P), and single‐crystal X‐ray crystallography ( 3 , 7 , 8 , 9 , and 10 ).