An All‐Solid‐State Fiber‐Shaped Aluminum–Air Battery with Flexibility,Stretchability, and High Electrochemical Performance

Owing to the high theoretical energy density of metal–air batteries, the aluminum–air battery has been proposed as a promising long‐term power supply for electronics. However, the available energy density from the aluminum–air battery is far from that anticipated and is limited by current electrode materials. Herein we described the creation of a new family of all‐solid‐state fiber‐shaped aluminum–air batteries with a specific capacity of 935 mAh g⁻¹ and an energy density of 1168 Wh kg⁻¹. The synthesis of an electrode composed of cross‐stacked aligned carbon‐nanotube/silver‐nanoparticle sheets contributes to the remarkable electrochemical performance. The fiber shape also provides the aluminum–air batteries with unique advantages; for example, they are flexible and stretchable and can be woven into a variety of textiles for large‐scale applications.     

Zur Benennung von Verbindungen im Si‐Al‐O‐N‐System

Die Übersetzung basiert auf der „Terminology for Compounds in the Si‐Al‐O‐N System“ der Commission on High Temperature Materials and Solid State Chemistry der Inorganic Chemistry Division der International Union of Pure and Applied Chemistry, veröffentlicht in Pure Appl. Chem. 1999 , 71, 1765–1769. Das Original wurde von R. Metselaar, Technische Universiteit Eindhoven (Niederlande) und D. S. Yan, Academia Sinica, Shanghai (China) für die Veröffentlichung vorbereitet.     

Single Benzene Green Fluorophore: Solid‐State Emissive,Water‐Soluble,and Solvent‐ and pH‐Independent Fluorescence with Large Stokes Shifts

Benzene is the simplest aromatic hydrocarbon with a six‐membered ring. It is one of the most basic structural units for the construction of π conjugated systems, which are widely used as fluorescent dyes and other luminescent materials for imaging applications and displays because of their enhanced spectroscopic signal. Presented herein is 2,5‐bis(methylsulfonyl)‐1,4‐diaminobenzene as a novel architecture for green fluorophores, established based on an effective push–pull system supported by intramolecular hydrogen bonding. This compound demonstrates high fluorescence emission and photostability and is solid‐state emissive, water‐soluble, and solvent‐ and pH‐independent with quantum yields of Φ=0.67 and Stokes shift of 140 nm (in water). This architecture is a significant departure from conventional extended π‐conjugated systems based on a flat and rigid molecular design and provides a minimum requirement for green fluorophores comprising a single benzene ring.     

Hierarchical Micro‐Mesoporous Carbon‐Framework‐Based Hybrid Nanofibres for High‐Density Capacitive Energy Storage

Advanced methods, allowing the controllable synthesis of ordered structural nanomaterials with favourable charges transfer and storage, are highly important to achieve ideal supercapacitors with high energy density. Herein, we report a microliter droplet‐based method to synthesize hierarchical‐structured metal–organic framework/graphene/carbon nanotubes hybrids. The confined ultra‐small‐volume reaction, give well‐defined hybrids with a large specific‐surface‐area (1206 m² g^?1), abundant ionic‐channels (narrow pore of 0.86 nm), and nitrogen active‐sites (10.63 %), resulting in high pore‐size utilization (97.9 %) and redox‐activity (32.3 %). We also propose a scalable microfluidic‐blow‐spinning method to consecutively generate nanofibre‐based flexible supercapacitor electrodes with striking flexibility and mechanical strength. The supercapacitors display large volumetric energy density (147.5 mWh cm^?3), high specific capacitance (472 F cm^?3) and stably deformable energy‐supply.     

Cyclotris(paraquat‐p‐phenylenes)

Reported here is the synthesis, solid‐state characterization, and redox properties of new triangular, threefold symmetric, viologen‐containing macrocycles. Cyclotris(paraquat‐p‐phenylene) ( CTPQT⁶⁺ ) and cyclotris(paraquat‐p‐1,4‐dimethoxyphenylene) ( MCTPQT⁶⁺ ) were prepared and their X‐ray single‐crystal (super)structures reveal intricate three‐dimensional packing. MCTPQT⁶⁺ results in nanometer‐sized channels, in contrast with its parent counterpart CTPQT⁶⁺ which crystallizes as a couple of polymorphs in the form of intercalated assemblies. In the solid state, MCTPQT^3(.+) exhibits stacks between the 1,4‐dimethoxyphenylene and bipyridinium radical cations, providing new opportunities for the manipulation and control of the recognition motif associated with viologen radical cations. These redox‐active cyclophanes demonstrate that geometry‐matching and weak intermolecular interactions are of paramount importance in dictating the formation of their intricate solid‐state superstructures.     

Synthesis,Structure, and Air‐stable N‐type Field‐Effect Transistor Behaviors of Functionalized Octaazanonacene‐8,19‐dione

Increasing the length of N‐heteroacenes or their analogues is highly desirable because such materials could have great potential applications in organic electronics. In this report, the large π‐conjugated N‐heteroquinone 6,10,17,21‐tetra‐((triisopropylsilyl)ethynyl)‐5,7,9,11,16,18,20,22‐octaazanonacene‐8,19‐dione (OANQ) has been synthesized and characterized. The as‐prepared OANQ shows high stability under ambient conditions and has a particularly low LUMO level, which leads to it being a promising candidate for air‐stable n‐type field‐effect transistors (FETs). In fact, FET devices based on OANQ single crystals have been fabricated and an electron mobility of up to 0.2 cm² V⁻¹ s⁻¹ under ambient conditions is reported. More importantly, no obvious degradation was observed even after one month. Theoretical calculations based on the single crystal are consistent with the measured mobility.     

Flexible Viologen‐Based Porous Framework Showing X‐ray Induced Photochromism with Single‐Crystal‐to‐Single‐Crystal Transformation

A viologen‐based Borromean entangled porous framework was found to be sensitive to both Cu_Kα and Mo_Kα X‐ray sources, showing rapid photochromic response and recovery within one minute. The X‐ray‐induced photochromic process is accompanied by a reversible single‐crystal‐to‐single‐crystal (SC‐SC) structural transformation, an unprecedented phenomenon for X‐ray sensitive materials. The complex can be further processed into portable thin films for detecting the dose of the X‐ray exposure. Moreover, the photochromism can occur over a broad temperature range of 100–333 K, both in the form of single crystals and thin films, making it a potential candidate for practical indoor and outdoor applications.     

Bacteriophage Tail‐Tube Assembly Studied by Proton‐Detected 4D Solid‐State NMR

Obtaining unambiguous resonance assignments remains a major bottleneck in solid‐state NMR studies of protein structure and dynamics. Particularly for supramolecular assemblies with large subunits (>150 residues), the analysis of crowded spectral data presents a challenge, even if three‐dimensional (3D) spectra are used. Here, we present a proton‐detected 4D solid‐state NMR assignment procedure that is tailored for large assemblies. The key to recording 4D spectra with three indirect carbon or nitrogen dimensions with their inherently large chemical shift dispersion lies in the use of sparse non‐uniform sampling (as low as 2 %). As a proof of principle, we acquired 4D (H)COCANH, (H)CACONH, and (H)CBCANH spectra of the 20 kDa bacteriophage tail‐tube protein gp17.1 in a total time of two and a half weeks. These spectra were sufficient to obtain complete resonance assignments in a straightforward manner without use of previous solution NMR data.     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.