Synthesis and optical and electrochemical properties of novel copolymers containing alternating 2,3‐divinylquinoxaline and hole‐transporting units

For the enhancement of charge affinity, electron‐affinitive 2,3‐divinylquinoxaline and a series of hole‐transporting chromophores (iminodibenzyl, phenothiazine, dihexyloxybenzene, and didodecyloxydistyrylbenzene) were incorporated alternately into the polymeric main chain. The resulting copolymers ( P1 – P4 ) were basically amorphous materials and were thermally stable below 300 °C. The electronic structures, photoluminescence, and electrochemical properties of these copolymers were mainly determined by the electron‐donating chromophores in the backbone. They showed significant positive solvatochromism in formic acid. An electrochemical study revealed that they exhibited lower band gaps (<2.3 eV) due to alternating donor and acceptor conjugated units (push–pull structure). Single‐layer light‐emitting diodes of aluminum, P1 – P4 , and indium tin oxide glass were fabricated, and preliminary electroluminescence spectra showed that P1 , P3 , and P4 were orange‐emitting materials. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4570–4580, 2002     

Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

Synthesis,optical and electrochemical properties of arylenevinylene‐based π‐conjugated polymers with imidazolium units in the main chain

Arylenevinylene‐based π‐conjugated polymers containing imidazolium cationic units in the main chain and their model compounds were synthesized and characterized in terms of optical and electrochemical properties. 9,9‐Bisoctylfluorene, 2,5‐bisdodecyloxybenzene, and 3‐dodecylthiophene were introduced as arylene units with different donor characteristics to evaluate the effect on the highest occupied molecular orbital‐lowest unoccupied molecular orbital (HOMO‐LUMO) gap energy. The UV–vis and fluorescence spectra of cationic polymers and model compounds with iodide counter anion exhibited a significant blue shift with respect to the parent neutral molecules. X‐ray single crystal analysis for model compounds revealed that the effective π‐conjugation length of cationic model compounds decreased compared to the neutral model compounds by means of twisted conformation directed by CH‐π interactions between N‐methyl groups of imidazolium and neighboring aryl units. The cyclic voltammetry measurement suggested the negative shift of LUMO levels by the conversion of imidazole to imidazolium, indicating the electron‐accepting characteristics of cationic imidazolium unit. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit: Synthesis and optical properties

Some linear π‐conjugated polymers containing 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit were synthesized via Sonogashira or Suzuki reaction for the first time and characterized by IR, NMR, and GPC. Because of the introduction of 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit into π‐conjugated system, all polymers exhibited good thermal stability with high decomposition temperature. Their optical and electrochemical properties were investigated. Based on the 2,4,6‐tris(thiophen‐2‐yl)‐1,3,5‐triazine unit linked with different aromatic rings, the polymers showed the tunable fluorescence from blue to blue‐green emission with satisfied quantum yield. Cyclic voltammetry measurement indicated that the LUMO and HOMO levels of the polymers could be adjustable through the main‐chain structural modification. All polymers had low LUMO level (?2.86 to ?3.06 eV) due to the high‐electron affinity of triazine unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 702–712, 2008     

Synthesis,characterization, and properties of regioregular conjugated polymers containing quaterthiophene and an acceptor repeating units

Novel donor–acceptor type polymers consisting of alternating quaterthiophene and an electron withdrawing moiety, pyrazinyl or pyridinyl, have been prepared using Stille coupling approach with moderate yields. The polymers were highly soluble in common organic solvents such as tetrahydrofuran and chloroform. The structure and optical properties of the polymers were characterized by NMR, UV‐vis and fluorescence spectroscopy, and cyclic voltammetry, respectively. The polymer having pyrazine unit exhibited a red‐shift in both absorption and emission in comparison with those analogs containing pyridine because of strong electron withdrawing character of the pyrazinyl group. The polymer containing pyrazinyl as acceptor units also depicted decrease in its optical and electrochemical bandgap relative to those polymers containing 2,5‐ or 2,6‐pyridine moieties. The electrochemical behavior showed facile n‐doping and p‐doping properties of those polymers consisting of alternating quaterthiophene and the acceptor moiety. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2163–2171, 2009     

Silafluorene‐based polymers for electrochromic and polymer solar cell applications

In this study, four novel silafluorene (SiF) and benzotriazole (Btz) bearing conjugated polymers are synthesized. In the context of electrochemical and optical studies, these polymers are promising materials both for electrochromic device (ECD) and polymer solar cell (PSC) applications. All of the polymers are ambipolar (both p‐ and n‐dopable) and multichromic. Electrochemistry experiments indicate that incorporation of selenophene instead of thiophene unit increases the HOMO energy level of the polymers. Power conversion efficiency of the PSCs reached 1.75% for PTBTSiF, 1.55% for PSBSSiF, 2.57% for PBTBTSiF, and 1.82% for PBSBSSiF. The hole mobilities of the polymers are estimated through space charge limited current (SCLC) model. PBTBTSiF has the highest hole mobility as 2.44 × 10^?3 cm² V s^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1541–1547     

Electrochemical fluorescence switching properties of conjugated polymers composed of triphenylamine,fluorene, and cyclic urea moieties

The study of the electrochemical fluorescence switching properties of the conjugated copolymers containing fluorene, triphenylamine, and 1,3‐diphenylimidazolidin‐2‐one moieties is reported. The polymers show high fluorescence quantum yields, excellent thermal stability, and good solubility in polar organic solvents. While the polymer emits blue light under UV irradiation, the fluorescence intensity is quenched upon electrochemical oxidation. The fluorescent behavior can be reversibly switched between nonfluorescent (oxidized) state and strong fluorescence (neutral) state with a high contrast ratio (I_f/I_f0) of 16.3. The role of the electrochemical oxidation of the triphenylamine moieties is to generate the corresponding radical cations that lead to fluorescence quenching in the solid matrix. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

Synthesis and properties of conjugated polymers containing 3,9‐ and 2,9‐linked carbazole units in the main chain

Novel conjugated polymers containing 3,9‐ or 2,9‐linked carbazole units in the main chain were synthesized by the polycondensation of ethynyl‐ and iodo‐substituted 9‐arylenecarbazolylene monomers, and their optical and electrical properties were studied. Polymers with weight‐average molecular weights of 3400–12,000 were obtained in 76–99% yields by the Sonogashira coupling polycondensation in piperidine or tetrahydrofuran (THF)/piperidine at 30 °C for 48 h. All the 3,9‐linked polymers absorbed light around 300 nm. The para‐phenylene‐linked polymer also absorbed light around 350 nm, while meta‐phenylene‐linked one did not. The 3,9‐linked polymers absorbed light at a wavelength longer than the 2,9‐linked one. The polymers emitted blue fluorescence with high quantum yields (0.21–0.78) upon excitation at the absorption maxima. The polymers were oxidized around 0.6 V, and reduced around 0.5 V. Poly( 1 ) showed the dark conductivity of 3.7 × 10^?11 S/cm (10³ V/cm). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3506–3517, 2009     

Conjugated polymers containing electron‐transporting,hole‐transporting,and light‐emitting units in the polymer main chain

Conjugated polymers containing electron‐transporting, hole‐transporting, and blue light‐emitting units were synthesized by Suzuki polycondensation. These copolymers exhibited excellent thermal and optical stability. Optical investigation indicated that the incorporation of the spirobifluorene units in the polymer main chain could markedly increase the effective conjugation length of polymers. Electrochemical studies showed that the incorporation of spirobifluorene unit could raise the electrochemical stability and improve the electron‐ and hole‐injecting abilities. The electroluminescent results also showed that the introducing of spirobifluorene units could significantly improve the device performance. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1349–1356, 2008     

Synthesis and photovoltaic properties of a low‐band‐gap polymer consisting of alternating thiophene and benzothiadiazole derivatives for bulk‐heterojunction and dye‐sensitized solar cells

We synthesized a novel low‐band‐gap, conjugated polymer, poly[4,7‐bis(3′,3′‐diheptyl‐3,4‐propylenedioxythienyl)‐2,1,3‐benzothiadiazole] [poly(heptyl₄‐PTBT)], consisting of alternating electron‐rich, diheptyl‐substituted propylene dioxythiophene and electron‐deficient 2,1,3‐benzothiadiazole units, and its photovoltaic properties were investigated. A thin film of poly(heptyl₄‐PTBT) exhibited an optical band gap of 1.55 eV. A bulk‐heterojunction solar cell with indium tin oxide/poly(3,4‐ethylenedioxythiophene)/poly(heptyl₄‐PTBT): methanofullerene [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) (1:4)/LiF/Al was fabricated with poly(heptyl₄‐PTBT) as an electron donor and PCBM as an electron acceptor and showed an open‐circuit voltage, short‐circuit current density, and power conversion efficiency of 0.37 V, 3.15 mA/cm², and 0.35% under air mass 1.5 (AM1.5G) illumination (100 mW/cm²), respectively. A solid‐state, dye‐sensitized solar cell with a SnO₂:F/TiO₂/N3 dye/poly(heptyl₄‐PTBT)/Pt device was fabricated with poly(heptyl₄‐PTBT) as a hole‐transport material. This device exhibited a high power conversion efficiency of 3.1%, which is the highest power conversion efficiency value with hole‐transport materials in dye‐sensitized solar cells to date. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1394–1402, 2007     

Synthesis and characterization of alternating copolymers containing triphenylamine as hole‐transporting units

A series of light‐emitting poly(p‐phenylene vinylene)s with triphenylamine units as hole‐transporting moieties in the main chain were synthesized via Wittig condensation in good yields. The newly formed vinylene double bonds possessed a trans configuration, which was confirmed by Fourier transform infrared and NMR spectroscopy. The high glass‐transition temperature (83–155 °C) and high decomposition temperature (>300 °C) suggested that the resulting copolymers possessed high thermal stability. These copolymers, especially TAAPV1, possessed a high weight‐average molecular weight (47,144) and a low polydispersity index (1.55). All the copolymers could be dissolved in common organic solvents, such as tetrahydrofuran (THF), CHCl₃, CH₂Cl₂, and toluene, and exhibited intense photoluminescence in THF (the emission maxima were located from 478 to 535 nm) and in film (from 478 to 578 nm). The low onsets of the oxidation potential (0.6–0.75 V) suggested that the alternating copolymers possessed a good hole‐transporting property due to the incorporation of triphenylamine moieties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3278–3286, 2001     

New ladder‐type conjugated polymer containing carbazole and fluorene units in backbone: Synthesis,optical, and electrochemistry properties

This article describes the synthesis and characterization of a new ladder‐type poly (p‐phenylene) (LPFC) containing alkylcarbazole and dialkylfluorene units in backbone, and its optical and electrochemical properties as well as its light‐emitting device performance. LPFC shows the well‐defined structure, high molecular weights, excellent thermal stability, and good solubility in common organic solvents. And it also shows strongly blue emission (λ_max = 465 nm) with quantum efficiency of 70% in solution, while its solid emission (λ_max = 470 nm) is almost the same as its solution. Electrochemical studies show that the highest occupied molecular orbital (HOMO) energy levels of LPFC is up to 5.29 eV, which is significantly higher than that of LPPP without carbazole in backbone, indicating an enhanced ability of hole injection from anodes. Furthermore, the single layer light‐emitting device using LPFC as the active layer shows blue emission (λ_max = 470 nm) with maximum luminescence of ～ 2000 cd/m² and maximum luminance efficiency of 0.43 cd/A. The attractive properties exhibited from new ladder‐type polymer establish LPFC as a good candidate for the potential application as transporting and emitting layer in polymeric light emitting diodes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3120–3127, 2008     

Synthesis and photovoltaic properties of thieno[3,4‐b]pyrazine or dithieno[3′,2′:3,4;2″,3″:5,6]benzo[1,2‐d]imidazole‐containing conjugated polymers

Novel conjugated polymers composed of benzo[1,2‐b:4,5‐b′]dithiophene and thieno[3,4‐b]pyrazine or dithieno[3′,2′:3,4;2″,3″:5,6]benzo[1,2‐d]imidazole units are synthesized by Stille polycondensation. The resulting polymers display a longer wavelength absorption and well‐defined redox activities. The effective intramolecular charge‐transfer and energy levels of all polymers are elucidated by computational calculations. Bulk‐heterojunction solar cells based on these polymers as p‐type semiconductors and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) as an n‐type semiconductor are fabricated, and their photovoltaic performances are for the first time evaluated. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1067–1075     

Polymers with alternating anthracene and phenylene building blocks linked by ethynylene and/or vinylene units: Studying structure‐properties‐relationships

Four conjugated polymers ( P1 – P4 ) consisting of alternating anthracene‐9,10‐diyl and 1,4‐phenylene building blocks connected via ethynylene as well as vinylene ( P1 and P2 ), ethynylene‐only ( P3 ), and vinylene‐only ( P4 ) moieties, respectively, were synthesized and studied. The phenylene units in all four polymers bear 2‐ethylhexyloxy side‐chains to promote good solubility. The three polymers with vinylene units ( P1 , P2 , and P4 ) were prepared using the Horner–Wadsworth–Emmons reaction. For the synthesis of the arylene‐ethynylene polymer P3, the palladium‐catalyzed Sonogashira cross‐coupling reaction was used. The polymers were characterized by NMR, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photophysical, absorption and photoluminescence, and electrochemical properties were studied. Spectroscopic ellipsometry measurements were performed to gain more insight on the optical properties. In addition, the transport properties were investigated using admittance spectroscopy. The bulk hole mobility and its dependence on the electric field were evaluated for P1 and P2 . © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 129–143     

Improved properties of polyfluorenevinylenes by introduction of carbazole units

New electroluminescent polyfluorenevinylenes (PFV) copolymers with carbazole group, CzPFVs, have been synthesized by the GILCH polymerization. The carbazole groups were introduced as pendant to increase the electron rich ability of the copolymers. All CzPFVs exhibited absorption spectra with maximum peaks at around 417 nm. In the PL emission spectra of CzPFVs, maximum peaks around 463 nm and shoulder peaks around 490–500 nm were exhibited. By adjusting the feed ratios of carbazole groups in the CzPFVs, it is possible to have the higher current density and brightness, and the lower turn‐on voltage due to increasing hole injection ability. The maximum luminescence of CzPFV9 was 2003 cd/m² at 7 V. The introduction of carbazole contents in PFVs can enhance the device performance to result in stable PL and EL spectra with high current density and brightness due to the increased hole injection ability and reduced interchain interaction between polymer backbones. Especially, the 1:1 mixture of CzPFV10 and PVK didn't show aggregation effect in PL spectra even after annealing the thin film at 80 °C up to 60 min, since the interchain interaction among polymer backbones with fluorenevinylene units was reduced. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4407–4419, 2008     

Synthesis and characterization of a new ethynyl‐linked alternating anthracene/fluorene copolymer for organic thin film transistor

A new p‐type conjugated copolymer, poly(9,10‐diethynylanthracene‐alt‐9,9‐didodecylfluorene) (PDADF), which is composed of ethynyl‐linked alternating anthracene/fluorene, is synthesized via a palladium(II)‐catalyzed Sonogashira coupling reaction with 9,10‐diethynylanthracene and 2,7‐diiodo‐9,9‐didodecyl‐fluorene. The obtained polymer is confirmed by FTIR, ¹H‐NMR, ¹³C‐NMR and elemental analysis. The PDADF had very good solubility in organic solvents such as chloroform and had a weight average molecular weight of 29,300 with a polydispersity index of 1.29. The PL maximum of the polymer was found at 533 and 568 nm for a solution and 608 nm for film, respectively. The highest occupied molecular orbital (HOMO) energy of the polymer is ?5.62 eV as measured via cyclic voltammetry (CV). A solution‐processed thin film transistor device showed a carrier mobility value of 6.0 × 10^?4 cm²/Vs with a threshold voltage of ?17 V and a capacitance (C_i) of 10 nF/cm². The out‐of‐plane and in‐plane GIXD pattern of spin‐coated polymer on SiO₂ dielectric surfaces showed an amorphous halo near 2θ = 20°. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1609–1616, 2009     

Effect of conjugated core building block dibenzo[a,c]phenazine unit on π‐conjugated electrochromic polymers: Red‐shifted absorption

A comparative investigation was undertaken for the electrosynthesis and electrochemical properties of three different electroactive polymers having a conjugated core building block, dibenzo[a,c]phenazine. A series of monomers has been synthesized as regards to thiophene based units; thiophene, 3‐hexyl thiophene, and 3,4‐ethylenedioxythiophene. The effects of different donor substituents on the polymers' electrochemical properties were examined by cyclic voltammetry. Introducing highly electron‐donating (ethylene dioxy) group to the monomer enables solubility while also lowering the oxidation potential. The planarity of the monomer unit enhances π‐stacking and consequently lowering the E_g from 2.4 eV (PHTP) to 1.7 (PTBP). Cyclic voltammetry and spectroelectrochemical measurements revealed that 2,7‐bis(4‐hexylthiophen‐2‐yl)dibenzo[a,c]phenazine (HTP) and 2,7‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)dibenzo[a,c]phenazine (TBP) possessed electrochromic behavior. The colorimetry analysis revealed that while PTBP have a color change from red to blue, PHTP has yellow color at neutral state and blue color at oxidized state. Hence the presence of the phenazine derivative as the acceptor unit causes a red shift in the polymers' absorption to have a blue color. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1714–1720, 2010     

Synthesis of polymers possessing tetraphenylethylene units by three‐component coupling reactions of poly(p‐phenylene ethynylene) derivative with aryl halides and phenylboronic acid

A derivative of poly(p‐phenylene ethynylene) was subjected to the palladium‐catalyzed three‐component coupling reactions with aryl halides and phenylboronic acid to obtain polymers having tetrasubstituted cis‐vinylene units. For example, 69% of the acetylene units in the prepolymer were converted to cis‐vinylene (i.e., tetrasubstituted cis‐vinylene) units using iodobenzene and phenylboronic acid (5 equiv each with respect to acetylene units). In the UV–vis absorption spectra of the resulting polymers, clear hypsochromic shifts of the absorption maxima were observed, while bathochromic shifts and suppression of the efficiency were observed in their photoluminescence spectra. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 787–791     

Electrochemical Post‐Functionalization of Conducting Polymers

This article summarizes recent progress in the post‐functionalization of conjugated polymers by electrochemical methods. These electrochemical polymer reactions typically proceed via electrochemical doping of a conjugated polymer film, followed by chemical transformation. Examples include the quantitative oxidative fluorination of polyfluorenes and oxidative halogenation of polythiophenes, as well as the reductive hydrogenation of polyfluorenones. The degree of functionalization, otherwise known as the reaction ratio, can be controlled by varying the charge passed through the polymer, allowing the optoelectronic properties of the conjugated polymers to be tailored. Wireless bipolar electrodes with an in‐plane potential distribution are also useful with regard to the electrochemical doping and reaction of conjugated polymers and allow the synthesis of films exhibiting composition gradients. Such bipolar electrochemistry can induce multiple reaction sites during electrochemical polymer reactions.

     

Synthesis and characterization of blue‐light emissive carbazole containing perfluorocyclobutyl arylene ether polymers

A series of N‐alkyl/aryl carbazole 3,6‐substituted arylene trifluorovinyl ether (TFVE) monomers were synthesized in high purity and yield from a concise four‐step synthesis using carbazole as a starting material. Condensate‐free, step‐growth chain extension of the monomers afforded perfluorocyclobutyl (PFCB) arylene ether homo‐ and copolymers as solution processable, optically transparent blue‐light emissive materials. Arylene TFVE monomers and conversion to PFCB arylene ether polymers were structurally elucidated and purity confirmed by high resolution mass spectroscopy, NMR (¹H, ¹³C, and ¹⁹F) spectroscopy, gel permeation chromatography, and attenuated total reflectance Fourier transform infrared analysis. Thermal analysis by differential scanning calorimetry and thermogravimetric analysis revealed glass transition temperatures >150 °C and onset of decomposition in nitrogen >410 °C with 40 wt % char yield up to 900 °C. Optical and electrochemical studies included solution (tetrahydrofuran) and solid state (spin cast thin film) UV–vis/fluorescence spectroscopy and cyclic voltammetry which showed structure dependence of these blue emissive systems on the nature of the N‐alkyl/aryl carbazole substitution in either homo‐ or copolymer configurations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 552–560