Chain-growth polycondensation for well-defined aramide. Synthesis of unprecedented block copolymer containing aramide with low polydispersity

Poly(p-benzamide) with a defined molecular weight and a low polydispersity and a block copolymer containing this well-defined aramide was synthesized. Phenyl 4-aminobenzoate, which would yield poly(p-benzamide), did not polymerize under the conditions of chain-growth polycondensation. However, phenyl 4-(4-octyloxybenzylamino)benzoate (1b) polymerized at room temperature in the presence of base and phenyl 4-nitrobenzoate (2) as an initiator in a chain-growth polycondensation manner to give well-defined aromatic polyamides having the 4-octyloxybenzyl groups as a protecting group on nitrogen in an amide. It was confirmed by a model reaction that deprotection of this protecting group proceeded completely with trifluoroacetic acid (TFA) without breaking the amide linkage. The utility of this approach to poly(p-benzamide) with a low polydispersity was demonstrated by the synthesis of block copolymers. Thus, phenyl 4-(octylamino)benzoate (1a) polymerized in the presence of 2 and base, followed by addition of 1b and base to the reaction mixture of the prepolymer to yield the block copolymer of 1a and 1b with a controlled molecular weight and a low polydispersity. The block copolymer was treated with TFA, resulting in a soluble block copolymer of poly(N-octyl-p-benzamide) and poly(p-benzamide). The SEM images of the supramolecular assemblies of the block copolymer showed mum-sized bundles and aggregates of flake structures.     

A variety of poly(m-benzamide)s with low polydispersities from inductive effect-assisted chain-growth polycondensation

Chain-growth polycondensation of 3-(alkylamino)benzoic acid alkyl esters 1 was investigated for obtaining poly(m-benzamide)s with defined molecular weights and low polydispersities. Polymerization conditions were first studied to find that ethyl 3-(octylamino)benzoate ( 1b ) polymerized in a chain polymerization manner in the presence of lithium 1,1,1,3,3,3-hexamethyldisilazide (LiHMDS) as a base and phenyl 4-methylbenzoate ( 2b ) as an initiator in THF at 0 °C. The molecular weight of the polymer was controlled by the feed ratio of monomer to initiator. The polymerization of 1c – i with a variety of N-alkyl groups was then carried out under the established conditions to yield well-defined poly(m-benzamide)s, which showed higher solubility than those of the corresponding poly(p-benzamide)s. Furthermore, the 4-octyloxybenzyl group on the amide nitrogen in poly 1i was removed by treatment with trifluoroacetic acid (TFA) to give N-unsubstituted poly(m-benzamide) (poly 1j ) with a low polydispersity, which is soluble in DMAc and DMSO, contrary to the para-substituted counterpart. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4990–5003, 2006     

Nematogenic block copolymers of rigid and flexible aromatic units. I. Synthesis and characterization

Three types of wholly aromatic block copolymers were synthesized using the phosphorylation reactions of Yamazaki and Higashi. Each copolymer contained blocks of rigid and flexible units. The first copolymer, PBA/PABH-T, contains blocks of poly(p-benzamide) and the polyterephthalamide of p-aminobenzhydrazide. The second copolymer, PBA/MPD-I, contains blocks of poly(p-benzamide) and poly(p-phenylene isophthalamide), whereas the third, PPD T/MPD-I, contains blocks of poly(p-phenylene terephthalamide) and poly(m-phenylene isophthalamide). Three synthetic routes were used for the preparation of the block copolymers. In the two-step polycondensation (A), monomers of the flexible block are added to the rigid prepolymer. The multistep method (B) differs in that the rigid prepolymer is carboxy-terminated prior to addition of the monomers of the flexible block. Carboxy-terminated prepolymer of the rigid block is reacted with amine-terminated prepolymer of the flexible block in the two-pot condensation (C). The presence of a considerable amount of the flexible homopolymer is indicated by viscosity, extraction, and NMR studies, particularly when methods A and C were used. The flexible homopolymer can be extracted by using a nonsolvent for the rigid blocks. Extraction of the rigid homopolymer (which may also be presumed to be produced) entails a more elaborate procedure. In principle, one can use these methods to obtain pure block copolymer for study of mixtures with the rigid and flexible homopolymers. Phase studies of some of these systems will be reported in a following paper.     

Nematogenic block copolymers via the yamazaki reaction

A novel extension of the Yamazaki reaction is used to prepare block copolymers having rigid blocks of poly-(p-benzamide) (PBA) and semiflexible blocks of polyamide-hydrazide. A PBA prepolymer having M ? 10,000 was synthesized by the usual Yamazaki reaction using triphenylphosphite. As previously reported, higher-molecular-weight PBA could be obtained using 4-N-(4′-aminobenzamido)benzoic acid containing a preformed amide linkage. Addition of p-aminobenzhydrazide and terephthalic acid then led to formation of the polyamide-hydrazide blocks using as the active reactant the diphenylphosphite formed as a by-product in the first polymerization. Evidence that a block copolymer is produced includes an increase in inherent viscosity during the second step, differences in the solubility of the copolymer compared to the homopolymers, and comparison of the phase diagram of the block copolymer in N-methylpyrrolidone having 4% added LiCl with those of a random copolymer, and of mixtures of the two homopolymers. The critical concentration required to form a nematic phase in solutions of the block copolymers is correlated with the length (or axial ratio) of the rigid block, and with its proportion in the copolymer.     

Nematogenic aromatic block copolymers of rigid and flexible units. II. Phase equilibria

The solubility and mesophase behavior are investigated for block copolymers of poly(p-benzamide) (PBA), the polyterephthalamide of p-aminobenzhydrazide (PABH-T), and PBA and poly(m-phenylene isophthalamide) (MPD-I) dissolved in N,N-dimethylacetamide (DMAc) containing 3% LiCl. The block copolymers, whose synthesis and characterization were described in the previous paper in this series, included samples prepared by the two-step and multistep copolycondensations. The first of these methods yields a considerable amount of the flexible homopolymer (PABH-T) and also some of the rigid homopolymer. The flexible homopolymer can be removed from the block copolymer by extraction with dimethyl sulfoxide (DMSO), whereas precipitation may offer a way to remove the rigid homopolymer. The results observed for the block copolymers are compared with those for the homopolymers and mixtures of homopolymers. The apparent solubility of the PBA/PABH-T block copolymers obtained by the two-step method is unusually large but decreases toward the value observed for mixtures after the flexible homopolymer had been extracted with DMSO. Labile adducts involving PABH-T and/or the block copolymer appear to be capable of forming a single mesophase. This offers a most interesting approach to the preparation of composite materials involving rigid and flexible polymers.     

Synthesis of central functionalized asymmetric triblock copolymers for surface modification and switchable surface properties

Well‐defined central functionalized asymmetric triblock copolymers (CFABC) were designed as a new type of polymer‐brush surface modifier with a short central functionalized block that could form chemical bonds with a suitable substrate surface. A combination of sequential living anionic polymerization and polymer modification reactions was used for the synthesis of two CFABCs: polystyrene‐b‐poly(4‐hydroxystyrene)‐b‐poly(methyl methacrylate) (3) and polystyrene‐b‐poly(4‐urethanopropyl triethoxysilylstyrene)‐b‐poly(methyl methacrylate) (4). The central block of 3, poly(4‐hydroxystyrene), was synthesized with a protected monomer, p‐[(tert‐butyldimethylsilyl)oxy]styrene, for the polymerization step, and this synthesis was followed by the hydrolysis of the silyl protecting group. To obtain polymer 4, the phenol functionality in 3 was converted to triethoxysilyl groups by a quantitative reaction with isocyanato propyl triethoxysilane. Gel permeation chromatography and NMR characterization indicated that the block copolymers possessed controlled molecular weights and narrow molecular weight distributions. Preliminary atomic force microscopy and X‐ray photoelectron spectroscopy analysis of the polymer brushes were reported. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3742–3750, 2000     

Anionic polymerization of oxirane in the presence of the polyiminophosphazene base t-Bu-P4

The use of the polyiminophosphazene base t-Bu-P₄ (1) for the anionic polymerization of ethylene oxide is described. Polymerization initiated by a monoalkoxide of the protonated base leads to well-defined poly(ethylene oxide)s with low polydispersity (M _w/M _n ≈ 1.1). Furthermore, graft copolymers of poly[ethylene-co-(vinyl alcohol)] (PEVA) with poly(ethylene oxide) and a star macromolecule were synthesized from multifunctional polyalkoxides in high yields.     

Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

n-Butyllithium/α-methylstyrene/benzene/diethyl ether: A suitable initiation system for anionic syntheses of model co- and homopolymers of styrene and isoprene

An initiation system of the anionic polymerization, intended for the syntheses of homopolymers and block copolymers with narrow molar mass distribution, was tested with styrene and isoprene. The actual initiating species, viz., the oligomeric α-methylstyryl anion, originates by the reaction of n-butyllithium with α-methylstyrene in a benzene/diethyl ether 1:1 (v:v) solvent mixture at room temperature. The homopolymers and two-block copolymers of styrene and isoprene, prepared by using this system, were characterized by light scattering, membrance osmometry, GPC, and ¹H NMR spectroscopy. By using the suggested initiation system, it is possible to synthesize well-defined homopolymers and block copolymers with low polydispersity (as judged by the shape of the GPC peaks and by the values of the polydispersity index), especially in a molar mass region between 4 × 10⁴ and 1.5 × 10⁵ g/mol. Above the upper limit of this interval, an appropriate decrease of the diethyl ether/benzene volume ratio is recommended, though the polymerization time must then be prolonged.     

Polyimides with low coefficient of thermal expansion derived from diamines containing benzimidazole and amide: Synthesis,properties, and the N-substitution effect

Three novel diamines, incorporating benzimidazole and amide moieties, namely 4-amino-N-(5-amino-benzimidazol-2-yl)-benzamide (6a), 4-amino-N-(5-amino-1- methyl-benzimidazol-2-yl)-benzamide (6b), and 4-amino-N-(5-amino-1-phenyl -benzimidazol-2-yl)-benzamide (6c), were designed and synthesized. A series of poly(benzimidazole-amide-imide) (PBIAI) films were prepared from the resulting diamines and 4,4-biphthalic dianhydride (BPDA). These flexible polyimides (PIs) showed high glass transition temperatures (T_g = 353–379°C), low coefficients of thermal expansion (CTE = 3.7–12.3 ppm K⁻¹) and good mechanical properties (σ = 152–207 MPa and E = 4.5–7.7 GPa), promising candidates for applications in flexible-display substrates. Furthermore, the data guided a feasible method to enhance T_g and reduce CTE by introducing benzimidazole and amide units into PI main chains, and the effect of different N-substituents on performance was revealed.     

Perfluorocyclobutyl-containing Amphiphilic Block Copolymers Synthesized by RAFT Polymerization

Amphiphilic block copolymers containing hydrophobic perfluorocyclobutyl‐based (PFCB) polyacrylate and hydrophilic poly(ethylene glycol) (PEG) segments were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The PFCB‐containing acrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)‐phenyl acrylate, was first synthesized from commercially available compounds in good yields, and this kind of acrylate monomer can be homopolymerized by free radical polymerization or RAFT polymerization. Kinetic study showed the 2,2′‐azobis(isobutyronitrile) (AIBN) initiated and cumyl dithiobenzoate (CDB) mediated RAFT polymerization was in a living fashion, as suggested by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer, while the polydispersity indices kept less than 1.10. The block polymers with narrow molecular weight distributions (M_w/M_n≦1.21) were prepared through RAFT polymerization using PEG monomethyl ether capped with 4‐cyanopentanoic acid dithiobenzoate end group as the macro chain transfer agent (mPEG‐CTA). The length of the hydrophobic segment can be tuned by the feed ratio of the PFCB‐based acrylate monomer and the extending of the polymerization time. The micellization behavior of the block copolymers in aqueous media was investigated by the fluorescence probe technique.     

Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Controlled polymerizations of 2‐(dialkylamino)ethyl methacrylates and their block copolymers in protic solvents at ambient temperature via ATRP

Very well‐controlled polymerizations of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and 2‐(diethylamino)ethyl methacrylate (DEAEMA) in aqueous and methanolic solutions via atom transfer radical polymerization (ATRP) at ambient temperature were demonstrated. Poly(DMAEMA) and poly(DEAEMA) of low polydispersity index (PDI) of ～1.07 were obtained using the p‐toluenesulfonyl chloride/CuCl/1,1,4,7,10,10‐hexamethyl‐triethylenetetramine (p‐TsCl/CuCl/HMTETA) system. Excellent control of polymerization was achieved even in pure methanol. This is in contrast with the very poor control of DMAEMA ATRP in methanol reported previously using a different intiator/catalyst/ligand system. The initiator p‐TsCl underwent hydrolysis reaction in aqueous methanolic solutions with a second‐order rate constant of 6.1 × 10^?4 dm³ mol^?1 s^?1 at 25 °C. Both poly(DMAEMA) and poly(DEAEMA) retained almost full chlorine‐functionization at the chain ends. Well‐defined block copolymers of DEAEMA and DMAEMA were successfully obtained by starting with either macroinitiators of DEAEMA or DMAEMA. Other well‐defined diblock copolymers could be prepared using these macroinitiators. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5161–5169, 2004     

Synthesis and characterization of pH sensitive poly(glycidol)‐b‐poly(4‐vinylpyridine) block copolymers

Block copolymers of poly(glycidol)‐b‐poly(4‐vinylpyridine) were obtained by ATRP of 4‐vinylpyridine initiated by ω‐(2‐chloropropionyl) poly(glycidol) macroinitiators. By changing the monomer/macroinitiator ratio in the synthesis polymers with varied P4VP/PGl molar ratio were obtained. The obtained block copolymers showed pH sensitive solubility. It was found that the linkage of a hydrophilic poly(glycidol) block to a P4VP influenced the pK_a value of P4VP. DLS measurements showed the formation of fully collapsed aggregates exceeding pH 4.7. Above this pH values the collapsed P4VP core of the aggregates was stabilized by a surrounding hydrophilic poly(glycidol) corona. The size of the aggregates depended significantly upon the composition of the block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1782–1794, 2009     

Shell-crosslinked nanoparticles through self-assembly of thermoresponsive block copolymers by RAFT polymerization

A reversible addition-fragmentation chain transfer (RAFT) agent, the methyl-2-(n-butyltrithiocarbonyl)propanoate (MBTTCP) has shown to be efficient in controlling the polymerization of N,N-dimethylacrylamide (DMA), N-isopropylacrylamide (NIPAM) and N-acryloyloxysuccinimide (NAS). Two different strategies have been studied to synthesize block copolymers based on one PNIPAN block and the other a random copolymer of DMA and NAS. When a PNIPAM trithiocarbonate-terminated is used as macromolecular chain transfer agent for the polymerization of a mixture of NAS and DMA, well-defined P(NIPAM-b-(NAS-co-DMA)) block copolymers were obtained with a low polydispersity index. These thermoresponsive block copolymers dissolved in aqueous solution at 25 °C and self-assembled into micelles when the temperature was raised above the LCST of the PNIPAM block. The micelle shell containing NAS units was further crosslinked using a primary diamine in order to get shell-crosslinked nanoparticles. Upon cooling below the LCST of PNIPAM this structure may easily reorganize to form nanoparticles with a water filled hydrophilic core.     

Synthesis and characterization of ABA‐type amphiphilic tri‐block copolymers through anionic polymerization using end functionalized poly(ethylene oxide) oligomers

ABA‐type amphiphilic tri‐block copolymers were successfully synthesized from poly(ethylene oxide) derivatives through anionic polymerization. When poly(styrene) anions were reacted with telechelic bromine‐terminated poly(ethylene oxide) ( 1 ) in 2:1 mole ratio, poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers were formed. Similarly, stable telechelic carbanion‐terminated poly(ethylene oxide), prepared from 1,1‐diphenylethylene‐terminated poly (ethylene oxide) ( 2 ) and sec‐BuLi, was also used to polymerize styrene and methyl methacrylate separately, as a result, poly (styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) and poly (methyl methacrylate)‐b‐poly(ethylene oxide)‐b‐poly(methyl methacrylate) tri‐block copolymers were formed respectively. All these tri‐block copolymers and poly(ethylene oxide) derivatives, 1 and 2 , were characterized by spectroscopic, calorimetric, and chromatographic techniques. Theoretical molecular weights of the tri‐block copolymers were found to be similar to the experimental molecular weights, and narrow polydispersity index was observed for all the tri‐block copolymers. Differential scanning calorimetric studies confirmed the presence of glass transition temperatures of poly(ethylene oxide), poly(styrene), and poly(methyl methacrylate) blocks in the tri‐block copolymers. Poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers, prepared from polystyryl anion and 1 , were successfully used to prepare micelles, and according to the transmission electron microscopy and dynamic light scattering results, the micelles were spherical in shape with mean average diameter of 106 ± 5 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Phenylquinoxaline–Aryl ester block copolymers

Phenylquinoxaline–aryl ester block copolymers were synthesized using well-defined phenolic hydroxyl terminated oligomers via a monomers/oligomer approach. Phenylquinoxaline oligomers with molecular weights of 5600 and 12,900 g/mol were prepared from the condensation of 1,4-bis(phenylglyoxalyl)benzene and 3,3′-diaminobenzidine in the presence of 4-hydroxylbenzil. The oligomers were copolymerized with isophthaloyl chloride and bisphenol A in tetrachloroethane to afford the desired phenylquinoxaline–aryl ester block copolymers. Copolymers with polyester compositions ranging from 15–50 wt % were prepared by controlling the monomers/oligomer stoichiometry. The majority of the materials displayed single phase morphologies with T_gs intermediate to the T_gs for the poly (phenylquinoxaline) and polyester homopolymers. Plots of the reciprocal of the T_g of the copolymers versus composition agreed well with values predicted by the Fox equation. A multiphase morphology was obtained for the copolymer with the highest polyester block length (? 13,000 g/mol), which displayed a T_g at 190 and 300°C indicative of a glassy–glassy system. Significant improvement in the elongations were observed for the copolymers relative to the poly(phenylquinoxaline) homopolymer. The improved elongations were obtained with minimal sacrifice to the modulus. These materials represent the first example of poly(phenylquinoxaline) block copolymers from well-defined phenylquinoxaline oligomers.     

Synthesis of hyperbranched aromatic polyamides by direct polycondensation

Some hyperbranched aromatic polyamides have been synthesized by direct polycondensation using the modified Higashi's method. Structures of the above polymers have been realized taking in proper account the analogies with amide group sequences of poly(p-phenyleneterephthalamide) (PPDT) and poly(p-benzamide) (PBA). Therefore, AB₂- type monomers as well as suitable combinations of different bi- and trifunctional reactants (AA + B₃) (e.g., p-phenylenediamine + trimesic acid or other trifunctional acids) have been considered. For the latter systems, network formation has been minimized. In the present paper, our results on their direct polyamidation together with some preliminary characterization data on the resultant hyperbranched aramids are given.     

Poly(p‐phenylene methylene)‐based block copolymers by mechanistic transformation

The synthesis of poly(p‐phenylene methylene) (PPM)‐based block copolymers such as poly(p‐phenylene methylene)‐b‐poly(ε‐caprolactone) and poly(p‐phenylene methylene)‐b‐polytetrahydrofuran by mechanistic transformation was described. First, precursor PPM was synthesized by acid‐catalyzed polymerization of tribenzylborate at 16 °C. Then, this polymer was used as macroinitiators in either ring‐opening polymerization of ε‐caprolactone or cationic ring‐opening polymerization of tetrahydrofuran to yield respective block copolymers. The structures of the prepolymer and block copolymers were characterized by GPC and ¹H NMR investigations. The composition of block copolymers as determined by ¹H NMR and TGA analysis was found to be in very good agreement. The thermal behavior and surface morphology of the copolymers were also investigated, respectively, by differential scanning calorimetry and atomic force microscopy measurements, and the contribution of the major soft segment has been observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365