NOx formation and flame velocity profiles of iso- and n-isomers of butane and butanol

NO formation and flame propagation are studied in premixed flames of iso- and n-isomers of butane and butanol through experimental measurements and direct simulation of experimental profiles. The stabilized flame is realized through the impingement of a premixed combustible jet from a contraction nozzle against a temperature-controlled plate. The velocity field is obtained by means of Particle Image Velocimetry (PIV) and nitric oxide concentration profiles are measured using Planar Laser Induced Fluorescence (PLIF), calibrated using known NO seeding levels. It is found that NO formation in n- and iso-isomers is comparable under the conditions considered, except for rich butanol mixtures, whereby NO formation is higher for iso-butanol. Generally, less NO is formed in butanol flames than in the butane flames. The experiment is simulated by a 1D chemically reacting stagnation flow model, using literature models of C1–C4 hydrocarbons [Wang et al., 2010] and butanol combustion chemistry [Sarathy et al., 2009, 2012]. NO prediction is tested using two of these mechanisms with a previously-published NO_x submechanism added into the butane and butanol models. While a good level of agreement is observed in the velocity field prediction under lean and stoichiometric conditions, discrepancies exist under rich conditions. Greater discrepancies are observed in NO prediction, except for the C1–C4 mechanism which shows good agreement with the experiment under lean and stoichiometric conditions. The current study provides data for further development of mechanisms with NO_x prediction capabilities for the fuels considered here.     

MCNP-FISPACT耦合燃耗计算程序开发与测试

反应堆堆芯的燃耗计算关系到堆芯的燃料管理,并直接影响堆芯的经济性评估,因此如何快速且准确地对堆芯进行燃耗计算一直是反应堆物理设计的研究重点之一。随着反应堆的发展,其几何结构和物理特性日渐复杂,现有的一维、二维耦合燃耗程序因其在几何处理上的限制,难以满足先进反应堆精细设计分析的要求。为对复杂反应堆堆芯的燃耗情况进行计算,结合粒子输运程序MCNP 处理复杂几何和燃耗程序FISPACT处理核素全面的特点,开发了接口程序耦合MCNP 和FISPACT来进行燃耗计算,并对耦合程序进行了计算验证。采用了IAEA 基准校核例题和CFETR中国聚变工程实验堆例题进行程序验证,经计算得出的有效倍增因子随燃耗的变化曲线和TBR等数据与标准例题的结果符合良好,其误差在可接受范围内。     

Topological dislocation-type defects and mechanisms of plasticity and failure of nanostructured and amorphous materials

Possible mechanisms of plastic deformation and failure of nanostructured and cluster amorphous materials have been considered. It is shown that the most probable carriers of plastic deformation in these materials are macrodislocations—linear topological defects of the regular nanocrystallite packing in the nanostructure or cluster packing in amorphous materials. Continuum models are proposed to describe the processes of plastic deformation and failure of nanostructured and cluster amorphous materials. Original Russian Text ? L.S. Vasil’ev, S.F. Lomaeva, 2009, published in Izvestiya Rossiiskoi Akademii Nauk. Seriya Fizicheskaya, 2009, Vol. 73, No. 1, pp. 128–131.     

Experimental and Theoretical Study of the Electronic States and Spectra of TeH and TeLi

Gas-phase emission spectra of the hitherto unknown free radical TeLi have been measured in the NIR range with a Fourier-transform spectrometer. The emissions were observed from a fast flow system in which tellurium vapor in argon carrier gas was passed through a microwave discharge and mixed with lithium vapor in an observation tube. Two systems of blue-degraded bands were measured at high spectral resolution in the ranges 8000-9000 and 5700-6700 cm(-1) and vibrational and rotational analyses were performed. In order to aid in the analysis of the experimental data, a series of relativistic configuration interaction calculations has been carried out to obtain potential curves for the low-lying states of TeLi and the isovalent TeH and also electric dipole transition moments connecting them. As in the TeH system, the ground state of TeLi is found to be X(2)Pi(i), but with a remarkably smaller spin-orbit splitting. The TeLi calculations indicate a strongly bound A(2)Sigma(+) state, while in TeH the analogous state is computed to lie significantly higher at approximately 32 000 cm(-1), and it is strongly predissociated. Based on the theoretical analysis, the observed TeLi band systems are assigned to the transitions A(2)Sigma(+)(A1/2)-->X(1)(2)Pi(3/2)(X(1)3/2) and A(2)Sigma(+)(A1/2)-->X(2)(2)Pi(1/2)(X(2)1/2). Analysis of the spectra has yielded the molecular constants (in cm(-1)) X(1)(2)Pi(3/2):omega(e)=457.49(3), omega(e)x(e)=2.482(9), B(0)=0.408908(8); X(2)(2)Pi(1/2): T(e)=2353.44(3), omega(e)=456.28(4), omega(e)x(e)=2.635(8), B(0)=0.414954(8), p(0)=1.00637(4); A(2)Sigma(+): T(e)=8574.64(2), omega(e)=437.81(3), omega(e)x(e)=2.581(8), B(0)=0.423903(8), p(0)=-0.19915(2), where the numbers in parentheses are the standard deviations of the parameters. Comparison of the isovalent TeLi and TeH systems emphasizes that the difference in bonding character (ionic in TeLi vs covalent in TeH) is responsible for qualitative differences in the electronic spectra of these two molecules. Copyright 2001 Academic Press.     

Some aspects of nucleation and evolution of microscopic and mesoscopic cracks and quasi-brittle fracture of homogeneous materials

The dynamics of nucleation of microcracks in the region of a developing macroscopic crack has been studied using scanning electron microscopy during in situ experiment and the acoustic emission method. An explosive-like nucleation of microcracks and the influence of dissipative properties of a material on the size and the rate of redistribution of local stresses of the microcracks have been established. Each of nucleations of microscopic and mesoscopic defects is considered as an act of local testing of the dissipative ability of the system, and the interaction between microcracks is determined by relaxation processes when the ability is sufficient. With deteriorating dissipative properties (with increasing residence time under loading, deformation rate, etc.), an elastic linear interaction becomes possible, and the macroscopic fracture occurs. In the microcrack dynamics, a specific ductile-brittle transition is determined by a time deterioration of the dissipative properties of the material under the action of a mechanical load. Generally, as a large latent energy is stored during deformation, a macroscopic fracture can be caused by any little discrete structural transformation.     

Quantum and surface properties of free films and nanoshells of molecular and atomic thicknesses

An original technology and the properties of new thin film nanoobjects, free films and shells of molecular and atomic thicknesses, are presented. Special attention is paid to shells of monoatomic or monomoleculer thickness with unique surface properties that have not been found in bulk materials.     

酸碱染料离子的缔合及等色化

本文阐述了等色染料离子对形成的实验方法,等色染料离子对的缔全机理及其形式,用吸收光谱的能级图,从电子理论角度论述了等色染料离子对的缔合效应等色化,溶剂效应等以化机理。列表示出等色染料离子对的高灵敏度,从而证明了等色染料离子对的萃取光度,浮选光度及萃取荧光光度法是高灵敏度和超灵敏度的新体系,为金属痕量和超痕量分析开辟了更为宽广的前景。     

Geometry and Elasticity of Strips and Flowers

We solve several problems that involve imposing metrics on surfaces. The problem of a strip with a linear metric gradient is formulated in terms of a Lagrangian similar to those used for spin systems. We are able to show that the low energy state of long strips is a twisted helical state like a telephone cord. We then extend the techniques used in this solution to two–dimensional sheets with more general metrics. We find evolution equations and show that when they are not singular, a surface is determined by knowledge of its metric, and the shape of the surface along one line. Finally, we provide numerical evidence by minimizing a suitable energy functional that once these evolution equations become singular, either the surface is not differentiable, or else the metric deviates from the target metric.     

Synthesis and characterizations of hollow spheres and nanospheres of Au

Hollow spheres and nanospheres of Au have been prepared by a simple reaction of HAuCl₄·4H₂O, NaOH and (NH₂OH)₂·H₂SO₄ in the presence of gelatin. The role of gelatin and the effect of the temperature of the reaction in producing the spherical particles of Au are discussed. The products were characterized by powder X-ray diffraction (XRD), transmission electron microscopy and UV–Vis absorption spectroscopy. The sizes of the nanospheres of Au were estimated by the Debye–Scherrer formula according to the XRD spectrum. PACS  81.05.Bx; 81.05.Rm; 81.07.-b; 81.16.Be; 81.20.Fw     

Experimental and computational investigation of extinction and autoignition of propane and n-heptane in nonpremixed flows

An experimental and computational investigation is carried out to characterize the influence of reactants on critical conditions for extinction and for autoignition of propane and n-heptane in nonpremixed counterflow configurations. Propane or vaporized n-heptane mixed with nitrogen is transported in one stream while the other stream is made up of air mixed with nitrogen. Measurements of the oxidizer stream temperature needed for autoignition are made at fixed values of the strain rate, either with the fuel mass fraction varied at a fixed oxygen mass fraction or with the oxygen mass fraction varied at a fixed fuel mass fraction. Extinction strain rates for propane are measured as a function of the oxygen mass fraction with room-temperature feed streams and the fuel mass fraction fixed and for n-heptane as a function of the fuel mass fraction with the oxygen mass fraction and feed-stream temperatures fixed. Predictions of critical conditions for extinction and autoignition are made employing detailed kinetic mechanisms. Predictions of critical conditions for extinction are in reasonable agreement with measurements, but there are significant discrepancies for autoignition. Measurements show that increasing the mass fraction of either fuel or oxygen increases the overall reactivity thereby reducing the autoignition temperature. The kinetic models predict the increase in reactivity of the mixing layer with increasing mass fraction of fuel but predict very little change in reactivity of the mixing layer with increasing mass fraction of oxygen, thus failing to predict the influence of oxygen on autoignition. It is concluded that there may exist kinetic pathways responsible for this disagreement that are yet to be discovered, and paths that fail to explain the results are identified.     

Some problems of analysis and optimization of plates and shells

The classical optimization problems of plates and shells to satisfy a priori given geometry and dynamical characteristics are considered. Orthotropic plates and shells with variable thickness and low transverse stiffness are analyzed. First, some useful theorems and their proofs are given. Then the finite approximation of the problem related to optimization of free vibrations of shells with transverse deformation and rotary inertia is discussed. The varational iteration (MVI) and Bubnov-Galerkin (MB) methods are applied, and their convergence and suitability for application to plates and shells analysis are discussed and numerically evaluated.     

Infrared Spectra and Configuration of Anion Radical and Dianion of Benzil and Benzil-18o

Abstract

Infrared spectra of the products of one- and two -step reduction of both benzil and benzil-¹⁸0 have been investigated in dimethylsulfoxide-d₆ and tetrahydrofurane solutions. Anion-radicals have been obtained by electrochemical reduction of benzil and benzil-¹⁸0; dinegative ions have been prepared by reduction of the same ketones with potassium mirror in vacuo. The band assignment has been performed using the group vibrational concept and isotopic shift data. The previous assignment of the C[dbnd]O stretching band of benzil anion-radical-has been discussed and corrected. Two bands in the infrared spectra of benzil dianion have been found to be sensitive upon ¹⁸0 isotope labelling. This result certifies the presence of cis-configuration of benzil dianion in the investigated solutions. A decrease of ca. 290 cm-¹ has been found for vC[dbnd]O after the transformation of the neutral benzil into an anion-radical. Conversion of benzil anion-radical into dianion has been accompanied by an additional vC[dbnd]O downward shift of 105 cm^?1     

Kinetics and mechanism of the reaction of alkoxymethylidene malonate and malononitrile with hydrazines and anilines

The kinetics and mechanism of the nucleophilic vinylic substitution of dialkyl (alkoxymethylidene)malonates (alkyl: methyl, ethyl) and (ethoxymethylidene)malononitrile with substituted hydrazines and anilines R¹–NH₂ (R¹: (CH₃)₂N, CH₃NH, NH₂, C₆H₅NH, CH₃CONH, 4‐CH₃C₆H₄SO₂NH, 3‐ and 4‐X‐C₆H₄; X: H, 4‐Br, 4‐CH₃, 4‐CH₃O, 3‐Cl) were studied at 25 °C in methanol. It was found that the reactions with all hydrazines (the only exception was the reaction of (ethoxymethylidene)malononitrile with N,N‐dimethylhydrazine) showed overall second‐order kinetics and k_obs were linearly dependent on the hydrazine concentration which is consistent with the rate‐limiting attack of the hydrazine on the double bond of the substrate. Corresponding Brønsted plots are linear (without deviating N‐methyl and N,N‐dimethylhydrazine), and their slopes (β_Nuc) gradually increase from 0.59 to 0.71 which reflects gradually increasing order of the C–N bond formed in the transition state. The deviation of both methylated hydrazines is probably caused by the different site of nucleophilicity/basicity in these compounds (tertiary/secondary vs. primary nitrogen). A somewhat different situation was observed with the anilines (and once with N,N‐dimethylhydrazine) where parabolic dependences of the kinetics gradually changing to linear dependences as the concentration of nucleophile/base increases. The second‐order term in the nucleophile indicates the presence of a steady‐state intermediate ‐ most probably T^±. Brønsted and Hammett plots gave β_Nuc = 1.08 and ρ = ?3.7 which is consistent with a late transition state whose structure resembles T^±. Copyright © 2013 John Wiley & Sons, Ltd.     

Polarity of the Medium and Quenching of Fluorescence of Caratenoids and Phthalimides

The relation for the dependence of the rate of radiationless energy conversion of the S ₁ state k _q on the polarity of the medium, obtained previously by the author, has been used to interpret the known literature data on the lifetime of the S ₁ state of solutions of some caratenoids and phthalimides. It has been shown that in alcohols and water (normal and deuterated ones) the fluorescence quenching of 4-amino-, 4-methylamino-, and 4-dimethylamino-N-methylphthalimides (4AMP, 4MAMP, and 4DMAMP) as well as of peridinine in alcohols is due to H-bond formation. It has been established that a twofold increase in the number of amine atoms of hydrogen on passing from 4MAMP to 4AMP, as well as deuteration of solvents in the case of 4DMAMP, is followed by a decrease in k _q by a factor of 1.6 and 1.75, respectively. The mechanism of quenching in complexes formed with solvent molecules by means of the H-bond is discussed. It has been concluded that the quenching of fluorescence of phthalimides in such complexes is mainly due to the intersystem crossing initiated by the oscillations of the protons or deuterons of the H-bonds.     

Geometry and scaling laws of excursion and iso-sets of enstrophy and dissipation in isotropic turbulence

Motivated by interest in the geometry of high intensity events of turbulent flows, we examine the spatial correlation functions of sets where turbulent events are particularly intense. These sets are defined using indicator functions on excursion and iso-value sets. Their geometric scaling properties are analysed by examining possible power-law decay of their radial correlation function. We apply the analysis to enstrophy, dissipation and velocity gradient invariants Q and R and their joint spatial distributions, using data from a direct numerical simulation of isotropic turbulence at Re_λ ≈ 430. While no fractal scaling is found in the inertial range using box-counting in the finite Reynolds number flow considered here, power-law scaling in the inertial range is found in the radial correlation functions. Thus, a geometric characterisation in terms of these sets’ correlation dimension is possible. Strong dependence on the enstrophy and dissipation threshold is found, consistent with multifractal behaviour. Nevertheless, the lack of scaling of the box-counting analysis precludes direct quantitative comparisons with earlier work based on multifractal formalism. Surprising trends, such as a lower correlation dimension for strong dissipation events compared to strong enstrophy events, are observed and interpreted in terms of spatial coherence of vortices in the flow.     

Accuracy and repeatability of QRAPMASTER and MRF-vFA

Our purpose is to evaluate bias and repeatability of the quantitative MRI sequences QRAPMASTER, based on steady-state imaging, and variable Flip Angle MRF (MRF-VFA), based on the transient response.Both techniques are assessed with a standardized phantom and five volunteers on 1.5 T and 3 T clinical scanners. All scans were repeated eight times in consecutive weeks.In the phantom, the mean bias±95% confidence interval for T1 values with QRAPMASTER was 10 ± 10% on 1.5 T and 4 ± 13% on 3.0 T. The mean bias for T1 values with MRF-vFA was 21 ± 17% on 1.5 T and 9 ± 9% on 3.0 T. For T2 values the mean bias with QRAPMASTER was 12 ± 3% on 1.5 T and 23 ± 1% on 3.0 T. For T2 values the mean bias with MRF-vFA was 17 ± 1% on 1.5 T and 19 ± 2% on 3.0 T. QRAPMASTER estimated lower T1 and T2 values than MRF-vFA. Repeatability was good with low coefficients of variation (CoV). Mean CoV ± 95% confidence interval for T1 were 3.2 ± 0.4% on 1.5 T and 4.5 ± 0.8% on 3.0 T with QRAPMASTER and 2.7% ± 0.2% on 1.5 T and 2.5 ± 0.2% on 3.0 T with MRF-vFA. For T2 were 3.3 ± 1.9% on 1.5 T and 3.2 ± 0.6% on 3.0 T with QRAPMASTER and 2.0 ± 0.4% on 1.5 T and 5.7 ± 1.0% on 3.0 T with MRF-vFA.The in-vivo T1 and T2 are in the range of values previously reported by other authors.The in-vivo mean CoV ± 95% confidence interval in gray matter were for T1 1.7 ± 0.2% using QRAPMASTER and 0.7 ± 0.5% using MRF-vFA and for T2 were 0.9 ± 0.4% using QRAPMASTER and 2.4 ± 0.5% using MRF-vFA. In white matter were for T1 0.9 ± 0.3% using QRAPMASTER and 1.3 ± 1.1% using MRF-vFA and for T2 were 0.7 ± 0.4% using QRAPMASTER and 2.4 ± 0.4% using MRF-vFA. A GLM analysis showed that the variations in T1 and T2 mainly depend on the field strength and the subject, but not on the follow-up repetition in different days. This confirms the high repeatability of QRAPMASTER and MRF-vFA.In summary, QRAPMASTER and MRF-vFA on both systems were highly repeatable with moderate accuracy, providing results comparable to standard references. While repeatability was similar for both methods, QRAPMASTER was more accurate. QRAPMASTER is a tested commercial product but MRF-vFA is 4.77 times faster, which would ease the inclusion of quantitative relaxometry.     

Atomic and electronic structures and stability of icosahedral nanodiamonds and onions

The relative stability of alternative carbon nanoparticles with icosahedral symmetry, such as diamond-like nanocrystallites and multiwalled fullerenes (onions), is investigated using the parametric model and the density functional tight-binding (DFTB) method. It is demonstrated that an increase in the size of particles and their hydrogenation favor the stabilization of diamond-like nanocrystallites. The formation of “intermediate” nanostructures consisting of diamond-like nanocrystallites inside the fullerene cage is revealed. The electronic spectra of icosahedral carbon nanoparticles are calculated.     

HeII的粘度理论分析与计算

在一般的分析与计算中,超流氦的粘度往往成为一个被忽视甚至被省略的一个物理量。但是在某些低温系统中,需要完成超流氦长距离输送,粘度成为确定其流动阻力损失的一个重要物理量。目前各具特色的理论和计算关系式很多,但是迄今为止,还没有任何一种理论体系或计算关系式可以适用于所有的物质或所有的温度和压力范围,因此如何应用和借鉴现有的粘度理论或关系式以及实验结果,实现对HeII这种特殊流体粘度的分析和计算是一项十分重要的工作。     

Instability and disruption of precision cumulation of cavities and mass flows in the field of gravitational and inertial forces and other dipole perturbations

The effect of gravitational and inertial forces on the precision cumulation of cavities, fast mass flows, and detonation and shock waves is studied in stages. The possible effects of these forces on the motion of masses and waves (the velocity, direction and structure of the waves can change) and on the properties of the medium in front of the waves that influence the change in the parameters and refraction of the waves are noted. It is shown that it is advantageous to perform precision cumulation experiments in zero-gravity. Zh. éksp. Teor. Fiz. 111, 2001–2015 (June 1997)     

Universality of melting and freezing indicators and additivity of melting curves

The assumption of universality of some melting and freezing indicators, in the context of approximate models of the liquid and the solid, gives rise to simple semi-empirical melting equations that describe additivity of melting curves. The melting equations are exact in the high temperature limit and give reasonably accurate results also near the triple point. They find many applications including quantum corrections to the melting curve.