Mathematical description of the softening temperature of poly(vinyl chloride) blends with solid-state chlorinated polyethylene

Summary Excess molar volumes of methyl tert-butyl ether (MTBE)+1-pentanol+octane and the binary mixtures MTBE+1-pentanol and 1-pentanol+octane, were measured at 298.15 K and atmospheric pressure, using a DMA 4500 Anton Paar densimeter. All the experimental values were compared with the results obtained by empirical expressions for estimating ternary properties from binary results.     

Kinetics of isothermal thermooxidative degradation of poly(vinyl chloride)/chlorinated polyethylene blends

The thermooxidative degradation of poly(vinyl chloride)/chlorinated polyethylene blends of different compositions was investigated by means of isothermal thermogravimetry in flowing atmosphere of synthetic air at temperatures 240–270 °C. The main degradation processes are dehydrochlorination of PVC and CPE. For calculation of the apparent activation energy and apparent pre-exponential factor two kinetic methods were used: isoconversional method and Prout–Tompkins method. True compensation dependency between Arrhenius parameters, obtained using Prout–Tompkins model, was found. Calculated kinetic parameters of isothermal thermooxidative degradation are close to those from non-isothermal degradation and confirm the assumption of the main degradation process in PVC/CPE blends.     

Studies of poly(vinyl chloride)/solution chlorinated polyethylene blends by inverse gas chromatography

The interactions between two polymers, poly(vinyl chloride) and solution chlorinated polyethylene, with a series of solvents have been studied using inverse gas chromatography. Values of the interaction parameters show the importance of specific interactions in these systems. From these values and studies of polymer mixtures, values of the polymer-polymer interaction parameter have been calculated. The values were small in agreement with values of the heat of demixing of the two polymers reported previously.Measurements using PTFE and kaolin as the substrate for these polymers show the importance of the substrate. Results suggest that the pore structure of PTFE leads to problems in obtaining reliable results.By making measurements for the mixed polymer system over a range of temperatures, it has been found possible to detect the temperature of phase separation. The phase diagram obtained agrees well with results reported previously.     

Structure of chlorinated poly(vinyl chloride). V. Molecular parameters of chlorinated poly(vinyl chloride)

The molecular parameters of samples of chlorinated poly(vinyl chloride) (CPVC) and chlorinated β,β-dideuterated poly(vinyl chloride) (β,β-d₂-CPVC) were determined by gel permeation chromatography (GPC), light scattering, osmometry, and viscometry. Comparison of GPC, light scattering, osmometric, and viscometric data resulted in a discussion of the possibility of degradation and the causes of changes in the solution properties in chlorination of PVC and ββ-dideuterated poly(vinyl chloride) (ββ-d₂-PVC). The results obtained are discussed in relation to the mechanism of chlorination of PVC.     

Processability characteristics of chlorinated poly(vinyl chloride)

Chlorinated poly(vinyl chloride) (CPVC) is known to have a higher softening temperature than conventional poly(vinyl chloride) (PVC). Its processability characteristics are, however, different; it has been reported that CPVC is more difficult to process. However, only limited information on the processability characteristics is available. This paper describes some studies of the flow behavior of CPVC melts in a capillary rheometer. The true melt viscosity and activation energy were determined between 190° and 210°C for a number of samples, and they appear to be related to the cohesive energy density of the samples. It was observed that melt fracture, i.e., gross distortion of the extrudate, occurs even at low shear rates in samples having a high chlorine content. This has been attributed to the relatively high pressures that have to be used, the pronounced non-Newtonian nature of the melt, and melt elasticity. It is postulated that melt elasticity could result from crosslinking at the site of the double bond which is known to be formed by dehydrochlorination.     

Thermooxidative degradation of poly(vinyl chloride) and chlorinated polyethylene with different Ca/Zn carboxylates

The thermooxidative degradation of poly(vinyl chloride) (PVC), chlorinated polyethylene (CPE) and PVC/CPE blend 50/50 was investigated by means of dynamic and isothermal thermogravimetric analysis in the flowing atmosphere of air. To estimate the thermooxidative stability of the samples the characteristics of thermogravimetric (TG) curves were used. Kinetic parameters (the apparent activation energy E and preexponential factor Z) were calculated after isoconversional method for the first stage of dynamic degradation where dehydrochlorination (DHCl) of PVC and/or CPE is the main degradation reaction. Despite the chemical resemblance, the degradation mechanisms of CPE and PVC are different, as a consequence of differences in microregularity of the corresponding polymer chains. The addition of Ca/Zn carboxylates as well as the ratio of Ca and Zn carboxylates have considerably different influence on the investigated polymers. This revised version was published online in August 2006 with corrections to the Cover Date.     

用DSC研究线形多嵌段聚氨酯与聚氯乙烯、氯化聚氯乙烯共混相容性

用示差扫描量热法（DSC）研究了线形多嵌段聚氨酯（PU）与聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）共混相容性，说明了PU／VC、PU／CPVC的相容是由于共混物中形成了新的氢键的缘故．聚酯型聚氨酯与PVC、CPVC的相容性要好子聚酸型聚氨酯，CPVC与PU的相容性又要好于PVC．聚氨酯中硬段的引入不利于PU／PVC、PU／CPVC的相容性．     

Combined relaxation study of poly(vinyl chloride) blends with chlorinated poly(ethylene), hydroxyl-terminated poly(butadiene), and ethylene-propylene-diene terpolymer

A number of blends based on suspension poly(vinyl chloride) and stabilizers with poly(ethylene) chlorinated in a fluidized-bed reactor containing 21.8% chlorine, hydroxyl-terminated poly(butadiene), and ethylene-propylene-diene terpolymer have been studied using such methods as thermally stimulated current depolarization and dynamic mechanical analysis. Some dielectric and thermodynamic parameters (τ_max, τ_o, E_a, ΔH^*, ΔS_E^*, ΔG^*, μ_eff) have been determined. Blends containing randomly chlorinated poly(ethylene) exhibited dipole–dipole interactions between the macromolecules of poly(vinyl chloride) which decreased at the expense of the long sequences of nonchlorinated methylene groups. Simultaneously, an increased physical interaction between poly(vinyl chloride) and the additives was observed in blends containing chlorinated poly(ethylene) and/or hydroxyl-terminated poly(butadiene), and ethylene-propylene-diene terpolymer. On the basis of the data of dynamic mechanical analysis obtained a heterogeneous structure of the blends is suggested. The development of a boundary interfacial layer with a proper region of relaxation proves the formation of compatible structures between the components. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1595–1608, 1998     

Thermal decomposition of poly(vinyl chloride) and chlorinated poly(vinyl chloride). II. Organic analysis

A concerted study of poly(vinyl chloride), chlorinated poly(vinyl chloride), and poly(vinylidene chloride) polymers by spectroscopy, thermal analysis, and pyrolysis-gas chromatography resulted in a proposed mechanism for their thermal degradation. Polymer structure with respect to total chlorine content and position was determined, and the influence of these polymer units on certain of the decomposition parameters is presented. Distinguishing differences were obtained for the kinetics of decomposition, reactive macroradical intermediates, and pyrolysis product distributions for these systems. It was determined that chlorinated poly(vinyl chloride) systems with long-chain ? CHCI? units were more thermally stable than the unchlorinated precursor, exhibited increasing activation energy for the dehydrochlorination, and produced chlorine-containing macroradical intermediates and chlorinated aromatic pyrolysis products. The poly(vinyl chloride) polymer was relatively less thermally stable, exhibited decreasing activation energy during dehydrochlorination, and produced polyenyl macro-radical intermediates and aromatic pyrolysis products.     

Mechanical properties of blends of PAMAM dendrimers with poly(vinyl chloride) and poly(vinyl acetate)

Hybrid blends of poly(amidoamine) PAMAM dendrimers with two linear high polymers, poly(vinyl chloride), PVC, and poly(vinyl acetate), PVAc, are reported. The interaction between the blend components was studied using dynamic mechanical analysis, xenon nuclear magnetic resonance (NMR) spectroscopy, and tensile property measurements. The data suggest a much higher degree of interaction between components of PVAc-containing blends compared to those containing PVC. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2111–2117, 1998     

NMR studies of chlorinated poly(vinyl chloride) and polybutadiene

Molecular structures of chlorinated poly(vinyl chloride) and polybutadiene have been studied by high resolution NMR. The spectra of the chlorinated polymers give broad signals. New peaks appear in the lower fields of the ? CH₂? and ? CHCl? groups with increasing chlorine content. The chlorination of poly(vinyl chloride) takes place predominantly on ? CH₂? rather than on ? CHCl? , e.g., a 70% chlorinated polymer has about 10 mole-% of ? CCl₂? groups. Polybutadiene reacts first with chlorine by addition to give a head-to-head poly(vinyl chloride), and then the substitution of the hydrogen atom takes place. Chlorinated polybutadiene with 70% Cl has about 18 mole-% of ? CCl₂? . The multiplets characteristic of spin-spin couplings in the spectrum of the original poly(vinyl chloride) are still observed in that of the highly chlorinated product. This fact shows that a considerable number of poly(vinyl chloride) sequences of certain lengths persist in the highly chlorinated polymer.     

Blends of a chlorinated poly(vinyl chloride) with a polyurethane

Blends of a 67% chlorinated poly(vinyl chloride) with a low-molecular-weight polyurethane are partially miscible over the 0–80% urethane compositional range. A single, composition-dependent glass transition temperature is observed from both DSC and dynamic mechanical measurements. The blends exhibit a cocontinuous morphology with domain sizes varying from 0.15 to 1.5 μm. These results point out that the relation between miscibility characteristics and domain size is a complex one, not only dependent upon the degree of miscibility, but also on the nature of the blend components and the test method used. Thus the domain size for a certain degree of miscibility is not a universal constant as was previously believed. The melt rheology of the blends as a function of composition is strongly “positive deviating” from the log additivity rule and fits a simplified version of the McAllister model. The strongly “positive deviating” rheological behavior of the blends is most likely a result of the cocontinuous morphology which makes the system behave as a highly entangled network.     

Graft polymers from poly(vinyl chloride) and chlorinated rubber

Graft polymers from poly(vinyl chloride) (PVC) and chlorinated rubber (CIR) with side chains of poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA), or poly(ethyl methacrylate) (PEMA) were synthesized. For this purpose, a vinyl monomer was polymerized in the presence of small quantities of PVC or CIR with benzoyl peroxide as catalyst. The graft polymers were separated from both homopolymers by precipitation with methanol from methyl ethyl ketone solutions of the reaction products and the grafting efficiency was calculated. The graft polymers were characterized by infrared spectra, elemental analysis, NMR, and osmometric or light-scattering determinations. From the results it is concluded that the PVC or CIR molecules contain side chains of PMMA, PMA, or PEMA. The graft polymers showed higher molecular weights, and the values of second virial coefficient for these polymers were much different from those of the starting polymers.     

Thermal decomposition of poly(vinyl chloride) and chlorinated poly(vinyl chloride). I. ESR and TGA studies

Significant effort has been made in the past by many workers to investigate the mechanism of thermal decomposition of poly(vinyl chloride) (PVC). The presence and role of free radicals has been controversial in this regard. Our data on PVC and chlorinated PVC systems demonstrate the existence of macroradicals in the early stage of thermal decomposition under inert and oxidative atmospheres. Data from conventional thermogravimetric experiments are used in conjunction with the electron spin resonance findings.     

用FTIR研究线形多嵌段聚氨酯与聚氯乙烯、氯化聚氯乙烯共混相容性

用溶液法得到线形多嵌段聚氨酯（PU）与聚氯乙烯（PV）、氯化聚氯乙烯（CPVC）的共混物。用FTIR研究PU/PVC、PU／CPVC共混物的相容性，发现PVC、CPVC的加入破坏了PU中原来的氢键，并且PU中的炭基（C=0）与PVC、CPVC中的α－H形成了新的氢键，因而说明了PU／PVC、PU／CPVC共混物具有良好的相容性。     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Relaxation properties of plasticised poly(vinyl chloride) and PVC blends

The temperature-frequency dependence of dielectric parameters for several PVC-plasticizer systems and PVC blends was obtained. Kinetic and activation parameters and α-relaxation spectra were estimated. The increase of the polar group number and size in the plasticizer molecules results in the narrowing of the relaxation spectra and in the increase of inner mobility of PVC segments. It was found for PVC-ABS and PVC-Paraloid blends that all relaxation characteristics depend on the miscibility of components. The results were also confirmed by the cloud point data.     

Investigations on poly(vinyl chloride). II. Pyrolysis of chlorinated polybutadienes as model compounds for poly(vinyl chloride)

The pyrolysis of chlorinated polybutadienes (CPB) was investigated by using a pyrolysis gas chromatograph. CPB corresponds to poly(vinyl chloride) (PVC) constructed with head–head and tail–tail linkages of the vinyl chloride unit. Benzene, toluene, ethyl-benzene, o-xylene, styrene, vinyltoluene, chlorobenzenes, naphthalene, and methylnaphthalenes were detected in the pyrolysis products from CPB above 300°C, and no hydrocarbons could be detected at 200°C. The pyrolysis products from CPB were similar to those from PVC and new products could not be detected. Lower aliphatics, toluene, ethylbenzene, o-xylene, chlorobenzenes, and methylnaphthalenes were released more easily from pyrolysis of CPB than from PVC; amounts of benzene, styrene, and naphthalene formed were small. These results support the conclusion that recombination of chlorine atoms with the double bonds in the polyene chain takes place and that scission of the main chain may depend on the location of methylene groups isolated along the polyene chain during the thermal decomposition of PVC.