Thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends

The aim of this work was to study the thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends. For that purpose, blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of diethyl-2-hexyl phthalate as plasticiser. Their miscibility was investigated by using differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). Their thermo-oxidative degradation at 180 ± 1 °C was studied and the amount of HCl released from PVC was measured by a continuous potentiometric method. Degraded samples were characterised, after purification, by FTIR spectroscopy and UV-visible spectroscopy. The results showed that the two polymers are miscible up to 60 wt% of poly(methyl methacrylate) (PMMA). This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (CO) of PMMA and hydrogen (CHCl) groups of PVC as shown by FTIR analysis. On the other hand, PMMA exerted a stabilizing effect on the thermal degradation of PVC by reducing the zip dehydrochlorination, leading to the formation of shorter polyenes.     

Mechanical properties of blends of PAMAM dendrimers with poly(vinyl chloride) and poly(vinyl acetate)

Hybrid blends of poly(amidoamine) PAMAM dendrimers with two linear high polymers, poly(vinyl chloride), PVC, and poly(vinyl acetate), PVAc, are reported. The interaction between the blend components was studied using dynamic mechanical analysis, xenon nuclear magnetic resonance (NMR) spectroscopy, and tensile property measurements. The data suggest a much higher degree of interaction between components of PVAc-containing blends compared to those containing PVC. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2111–2117, 1998     

Morphology and properties of poly(vinyl chloride)–poly(butadiene-co-acrylonitrile) blends

The objective of this research was to study the structure-property relationships of two poly(vinyl chloride) (PVC)–poly(butadiene-co-acrylonitrile) (BAN) blends which exhibit differences in blend compatibility. Studies were carried out utilizing differential scanning calorimetry, dynamic mechanical testing, stress–strain, transmission electron microscopy (TEM), and infrared dichroism experiments at different temperatures. The BAN 31/PVC (BAN containing 31% acrylonitrile) system is considered to be nearly compatible as evidenced by T_g shifts, stress–strain results, orientation characteristics, and TEM micrographs. Similar experiments indicate that the BAN 44/PVC system is incompatible, and contains a mixed phase of BAN 44-PVC and a pure BAN 44 phase. The extent of heterogeneity in the compatible BAN 31/PVC system, however, plays an important role in the orientation characteristics of the blends.     

Thermal properties of poly(vinyl chloride)/polyurethane blends

Blends of poly(vinyl chloride) and a polyurethane elastomer were investigated by DSC and tensile testing. Up to 30 wt% single glass transition was found. It was concluded that the polyurethane forms partly a true blend and is partly disperged in the continuous blend phase.     

Preparation and properties of composites made from rice straw and poly(vinyl chloride) (PVC)

Rice straw was employed for the preparation of lignocellulosic‐poly(vinyl chloride) (PVC) composites. The effect of pretreatment of rice straw, concentration of PVC, pressure as well as pressing temperature on the mechanical properties and water absorption was studied. Also, the effect of lignin as coupling agent on the mechanical properties and water absorption of composite was studied. Composites of rice straw comprising both PVC and a coupling agent offer superior properties compared to those made from only rice straw and PVC. The extent of improvement in the mechanical properties and dimensional stability of composites depended not only on the pretreatment of rice straw, concentration of PVC and lignin but also on pressure and pressing temperature. Copyright © 2004 John Wiley & Sons, Ltd.     

Designing anti-migration furan-based plasticizers and their plasticization properties in poly (vinyl chloride) blends

The use of bio-based plasticizers with low toxicity and good compatibility with polyvinyl chloride (PVC) has attracted more attention in the recent years. With bio-based 2, 5-furandicarboxylic acid (FDCA) and butyl oligo-glycol ethers as raw materials, three liquid furan-based plasticizers of di(butyl glycol) furan-2,5-dicarboxylate, di(butyldiglycol) furan-2,5-dicarboxylate and di(butyltriglycol) furan-2,5-dicarboxylate were synthesized by direct esterification. The chemical structure of three plasticizers was characterized with FTIR, ¹H NMR and ¹³C NMR. From DMA measurement, the glass transition temperature (T_g) of the plasticized PVC was decreased gradually when furan-based plasticizers were added to PVC formulation from 30 up to 50 phr. Due to lots of ether bonds in furan-based plasticizers, they expressed over two-fold lower migration in organic solvent compared with the traditional plasticizer diethylhexyl phthalate (DEHP). Through the characterization of elongation at break, hardness and thermal stability, furan-based plasticizers presented the same plasticization properties as DEHP, and had potential industrial application prospects.     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Leaching of organotin compounds from poly(vinyl chloride) (PVC) material

The release of mono-and di-butyltin species (MBT and DBT) in water after leaching of five different poly(vinyl chloride) (PVC) materials was investigated under mild conditions over a period of one month in batch reactor systems. Results showed that inorganic tin, MBT and DBT compound were released from the material tested under experimental static leaching conditions. The total amount of inorganic tin and organotin compounds observed upon leaching varied considerably from one PVC material to another.     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.     

Properties of poly(vinyl chloride) blends with polycarbonates and chlorinated polyethylene

The miscibility of polycarbonates derived from Bisphenol A or 2,5,2′,5′-tetramethyl-Bisphenol A with poly(vinyl chloride), chlorinated poly(vinyl chloride), and vinyl chloride-vinylidene chloride copolymers has been investigated. In miscible blends a shift of the position of the carbonyl absorption in the IR spectra indicates dipolar interactions between the polymers. The miscibility of chlorinated polyethylenes and reduced poly(vinyl chloride)s among each others demonstrates besides the importance of polar groups the influence of their distribution within the polymer chains for the compatibility of the polymers. The investigations on the miscibility have been carried out by differential scanning calorimetry, and by casting films with microscopical observation of the resulting structures.     

Studies of photooxidative degradation of poly(vinyl chloride)/poly(ethylene oxide) blends

The photooxidative degradation of blends (in a full range of compositions) of amorphous poly(vinyl chloride) (PVC) with semicrystalline poly(ethylene oxide) (PEO) in the form of thin films is investigated using absorption spectroscopy (UV–visible and Fourier transform infrared) and atomic force microscopy (AFM). The amount of insoluble gel formed as a result of photocrosslinking is estimated gravimetrically. It is found that the PVC/PEO blendsí susceptibility to photooxidative degradation differs from that pure of the components and depends on the blend composition and morphology. Photoreactions such as degradation and oxidation are accelerated whereas dehydrochlorination is retarded in blends. The photocrosslinking efficiency in PVC/PEO blends is higher than in PVC; moreover, PEO is also involved in this process. AFM images showing the lamellar structure of semicrystalline PEO in the blend lead to the conclusion that the presence of PVC does not disturb the crystallization process of PEO. The changes induced by UV irradiation allow the observation of more of the distinct PEO crystallites. This is probably caused by recrystallization of short, more mobile chains in degraded PEO or by partial removal of the less stable amorphous phase from the film surface. These results confirm previous information on the miscibility of PVC with PEO. The mechanism of the interactions between the components and the blend photodegradation are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 585–602, 2004     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.     

Dynamic mechanical properties of plasticized poly(vinyl chloride)

The complex compliance in extension of gels of poly(vinyl chloride) (PVC) in di(2-ethylhexyl) phthalate (DOP) and in tricresyl phosphate (TCP) was measured over the frequency range from 0.6 to 0.006 cps and the temperature range from ?66 to 65°C: the weight fractions of DOP and TCP in the gels were 0.32, 0.40, 0.49, and 0.59. Measurements were carried out in an apparatus using forced low-frequency longitudinal osillations. Data for the gels could not be combined by the method of reduced variables, since there were gradual changes with decreasing temperature, attributable to an increase in crystallinity. Application of the reduction method of Ninomiya and Ferry for solutions of crystalline polymers was found to be successful. The apparent melting temperatures (T′_m) were obtained from the temperature dependence of the vertical shift factors. An apparent heat of fusion of ca. 120 cal/mole of monomer unit was found. This melting range was in agreement with that of secondary crystallinity in plasticized PVC reported in calorimetric studies by Juijn. With decreasing temperature, two phenomena occurred in the temperature range from T_g + ca. 80°C to T_g: the vitrification of a concentrated amorphous solution and the slight crystallization of the polymeric component. The larger the difference between T_g and T′_m the broader the primary dispersion zone on the frequency scale. This broadening effect was explained as due to the difference in dependence of T_g and T′_m on plasticizer concentration, without any need to consider any specific interaction between plasticizer and PVC.     

Some optical and mechanical properties of poly(vinyl chloride)

The optical and mechanical properties of poly(vinyl chloride) film were examined by observing both the stress and birefringence during stretching at constant rate, during relaxation at constant length and during a dynamic birefringence experiment. Experiments were also done by varying the temperature at constant length. The changes in birefringence are interpreted in terms of changes in negative distortional birefringence, changes in positive orientation birefringence, and possible reversible changes in birefringence with temperature arising from conformational changes in the polymer chain and changes in the contribution of birefringent crystals.     

A two-stage stress-dependent creep mechanism in plasticized poly(vinyl chloride) (PVC)

The temperature dependence of tensile creep of plasticized poly(vinyl chloride) (PVC) was tested under differently applied stresses. The steady creep rate showed two distinct stages, depending on stress and temperature. At relatively low stresses the activation energy (0.2 eV) which characterized the steady creep mechanism of stage I, showed no stress sensitivity. Under high stresses (stage II) the energy-activating steady creep was of the order of 1 eV and increased excessively with increasing stress. The model for plastic flow of PVC suggested here assigns the extension of the twisted zigzag molecular conformation to creep in stage I. In stage II creep is controlled by the reorientation of molecular segments by rotation from initially random orientations in a direction parallel to the principal tensile axis. γ Irradiation of the samples before testing increased the steady creep rate and reduced the creep lifetime. This was attributed to chain scission and greater mobility of the molecular segments.     

Thermal degradation of poly(vinyl chloride)/poly(ethylene oxide) blends: Thermogravimetric analysis

Thermal stability of poly(vinyl chloride)/poly(ethylene oxide) (PVC/PEO) blends has been investigated by thermogravimetric analysis (TGA) in dynamic and isothermal heating regime. PVC/PEO blends were prepared by hot-melt extrusion (HME). According to TG analysis, PEO decomposes in one stage, while PVC and PVC/PEO blends in two degradation stages. In order to evaluate the effect of PEO content on the thermal stability of PVC/PEO blends, different criteria were used. It was found that thermal stability of PVC/PEO blends depends on the blend composition. The interactions of blends components with their degradation products were confirmed. By using multiple heating rate kinetics the activation energies of the PVC/PEO blends thermal degradation were calculated by isoconversional integral Flynn–Wall–Ozawa and differential Friedman method. According to dependence of activation energy on degree of conversion the complexity of degradation processes was determined.     

Compatibility of poly(ethylene oxide)/poly(vinyl chloride) blends by differential scanning calorimetry

This article refers to a study of the thermal behaviour of poly(ethylene oxide) and poly(vinyl chloride) blends in the solid state. The compatibility has been examined by differential scanning calorimetry. The influence of molecular masses of the polymers on their compatibility has been shown. The equilibrium melting temperatures decrease in the mixture, such behaviour being progressively greater with the PEO reduction. The melting temperature of blends increases linearly with the crystallization temperature for a wide range of undercooling. Values of the parameters χ₁₂ and B have been obtained.     

Studies of polylactone/poly(vinyl chloride), polylactone/poly(vinyl fluoride), and polylactone/poly(vinylidene fluoride) blends

It is shown that polyvalerolactone/poly(vinyl chloride) (PVL/PVC) blends are miscible over all compositions since a single glass transition temperature T_g is observed, intermediate between those of pure PVL and pure PVC. Melting points, enthalpies of fusion and morphologies of PVL/PVC blends are also reported. It is also shown that polyvalerolactone, poly(α-methyl-α-n-propyl-β-propiolactone), poly(α-methyl-α-ethyl-β-propiolactone), and poly(caprolactone) are immiscible with poly(vinyl fluoride) and poly(vinylidene fluoride), despite the fact that all these polylactones are miscible with PVC. Differences in electronegativity, in atomic radius, and in molar attraction between the fluoride and the chlorine atoms are probably responsible for this difference in behavior.     

Photo-oxidation of poly(vinyl chloride)

Hydrogen chloride is evolved at an increasing rate in the light-induced oxidation of poly(vinyl chloride) films. These accelerated kinetics were shown to result from an increased absorption of light by the polyenes formed, since the quantum yield of dehydrochlorination (Φ_HCl = 0·015) is independent of the extent of the reaction in the dose range investigated. Determination of the quantum yields of the different processes involved indicate that, for each scission of the polymer backbone, 11 molecules of hydrogen chloride are evolved while three carbonyl groups, two hydroperoxides and 0·4 intermolecular crosslinks appear on the polymer chain. A mechanism that involves β-scissions of the tertiary alkoxy radicals, resulting from non-terminating interactions of α-chloro-peroxy radicals, is suggested to explain the observed increase of the polymer degradation in the presence of oxygen.