Hypercontractive Inequalities for the Second Norm of Highly Concentrated Functions,and Mrs. Gerber’s-Type Inequalities for the Second Rényi Entropy

Let Tϵ, 0≤ϵ≤1/2, be the noise operator acting on functions on the boolean cube {0,1}n. Let f be a distribution on {0,1}n and let q>1. We prove tight Mrs. Gerber-type results for the second Rényi entropy of Tϵf which take into account the value of the qth Rényi entropy of f. For a general function f on {0,1}n we prove tight hypercontractive inequalities for the ℓ2 norm of Tϵf which take into account the ratio between ℓq and ℓ1 norms of f.     

λ-Deformation: A Canonical Framework for Statistical Manifolds of Constant Curvature

This paper systematically presents the λ-deformation as the canonical framework of deformation to the dually flat (Hessian) geometry, which has been well established in information geometry. We show that, based on deforming the Legendre duality, all objects in the Hessian case have their correspondence in the λ-deformed case: λ-convexity, λ-conjugation, λ-biorthogonality, λ-logarithmic divergence, λ-exponential and λ-mixture families, etc. In particular, λ-deformation unifies Tsallis and Rényi deformations by relating them to two manifestations of an identical λ-exponential family, under subtractive or divisive probability normalization, respectively. Unlike the different Hessian geometries of the exponential and mixture families, the λ-exponential family, in turn, coincides with the λ-mixture family after a change of random variables. The resulting statistical manifolds, while still carrying a dualistic structure, replace the Hessian metric and a pair of dually flat conjugate affine connections with a conformal Hessian metric and a pair of projectively flat connections carrying constant (nonzero) curvature. Thus, λ-deformation is a canonical framework in generalizing the well-known dually flat Hessian structure of information geometry.     

The Longitudinal Plasma Modes of κ-Deformed Kaniadakis Distributed Plasmas Carrying Orbital Angular Momentum

Based on plasma kinetic theory, the dispersion and Landau damping of Langmuir and ion-acoustic waves carrying finite orbital angular momentum (OAM) were investigated in the κ-deformed Kaniadakis distributed plasma system. The results showed that the peculiarities of the investigated subjects relied on the deformation parameter κ and OAM parameter η. For both Langmuir and ion-acoustic waves, dispersion was enhanced with increased κ, while the Landau damping was suppressed. Conversely, both the dispersion and Landau damping were depressed by OAM. Moreover, the results coincided with the straight propagating plane waves in a Maxwellian plasma system when κ=0 and η→∞. It was expected that the present results would give more insight into the trapping and transportation of plasma particles and energy.     

Trapezoidal-Type Inequalities for Strongly Convex and Quasi-Convex Functions via Post-Quantum Calculus

In this paper, we establish new (p,q)κ1-integral and (p,q)κ2-integral identities. By employing these new identities, we establish new (p,q)κ1 and (p,q)κ2- trapezoidal integral-type inequalities through strongly convex and quasi-convex functions. Finally, some examples are given to illustrate the investigated results.     

Electron Kinetic Entropy across Quasi-Perpendicular Shocks

We use Magnetospheric Multiscale (MMS) data to study electron kinetic entropy per particle Se across Earth’s quasi-perpendicular bow shock. We have selected 22 shock crossings covering a wide range of shock conditions. Measured distribution functions are calibrated and corrected for spacecraft potential, secondary electron contamination, lack of measurements at the lowest energies and electron density measurements based on plasma frequency measurements. All crossings display an increase in electron kinetic entropy across the shock ΔSe being positive or zero within their error margin. There is a strong dependence of ΔSe on the change in electron temperature, ΔTe, and the upstream electron plasma beta, βe. Shocks with large ΔTe have large ΔSe. Shocks with smaller βe are associated with larger ΔSe. We use the values of ΔSe, ΔTe and density change Δne to determine the effective adiabatic index of electrons for each shock crossing. The average effective adiabatic index is 〈γe〉=1.64±0.07.     

New Parameterized Inequalities for η-Quasiconvex Functions via (p,q)-Calculus

In this work, first, we consider novel parameterized identities for the left and right part of the (p,q)-analogue of Hermite–Hadamard inequality. Second, using these new parameterized identities, we give new parameterized (p,q)-trapezoid and parameterized (p,q)-midpoint type integral inequalities via η-quasiconvex function. By changing values of parameter μ∈[0,1], some new special cases from the main results are obtained and some known results are recaptured as well. Finally, at the end, an application to special means is given as well. This new research has the potential to establish new boundaries in comparative literature and some well-known implications. From an application perspective, the proposed research on the η-quasiconvex function has interesting results that illustrate the applicability and superiority of the results obtained.     

Modelling of the Electrical Membrane Potential for Concentration Polarization Conditions

Based on Kedem–Katchalsky formalism, the model equation of the membrane potential (Δψs) generated in a membrane system was derived for the conditions of concentration polarization. In this system, a horizontally oriented electro-neutral biomembrane separates solutions of the same electrolytes at different concentrations. The consequence of concentration polarization is the creation, on both sides of the membrane, of concentration boundary layers. The basic equation of this model includes the unknown ratio of solution concentrations (Ci/Ce) at the membrane/concentration boundary layers. We present the calculation procedure (Ci/Ce) based on novel equations derived in the paper containing the transport parameters of the membrane (Lp, σ, and ω), solutions (ρ, ν), concentration boundary layer thicknesses (δl, δh), concentration Raileigh number (RC), concentration polarization factor (ζs), volume flux (Jv), mechanical pressure difference (ΔP), and ratio of known solution concentrations (Ch/Cl). From the resulting equation, Δψs was calculated for various combinations of the solution concentration ratio (Ch/Cl), the Rayleigh concentration number (RC), the concentration polarization coefficient (ζs), and the hydrostatic pressure difference (ΔP). Calculations were performed for a case where an aqueous NaCl solution with a fixed concentration of 1 mol m⁻³ (Cl) was on one side of the membrane and on the other side an aqueous NaCl solution with a concentration between 1 and 15 mol m⁻³ (Ch). It is shown that (Δψs) depends on the value of one of the factors (i.e., ΔP, Ch/Cl, RC and ζs) at a fixed value of the other three.     

Study of Bulk Properties of Strange Particles in Au+Au Collisions at [... formula ...] = 54.4 GeV

We analyzed the transverse momentum pT spectra of various strange hadrons KS0, Λ(Λ¯) and Ξ−(Ξ¯+) at mid-rapidity (y) in different centrality intervals from Au+Au collisions at sNN= 54.4 GeV. The pT spectra of these strange hadrons are investigated by the Tsallis-like distribution, which satisfactorily fits the experimental data. The bulk properties of the medium produced in ultra-relativistic heavy-ion collisions at the kinetic freeze-out are reflected by measuring the hadron spectra. The effective temperature T, transverse flow velocity βT, and mean pT along with other parameters that are strongly dependent on centrality and particle specie are extracted. The effective temperature of multi-strange particle (Ξ−(Ξ¯+)) is larger as compared to singly-strange particles Λ(Λ¯) and KS0. Furthermore, the kinetic freeze-out temperature T, transverse flow velocity βT. and mean pT (〈pT〉) show a decreasing trend towards lower centrality, while the entropy parameter q increases from central to peripheral collisions. In addition, a positive correlation of 〈pT〉 and T and a negative correlation of q and T are also reported.     

A Generalization of the Concavity of Rényi Entropy Power

Recently, Savaré-Toscani proved that the Rényi entropy power of general probability densities solving the p-nonlinear heat equation in Rn is a concave function of time under certain conditions of three parameters n,p,μ , which extends Costa’s concavity inequality for Shannon’s entropy power to the Rényi entropy power. In this paper, we give a condition Φ(n,p,μ) of n,p,μ under which the concavity of the Rényi entropy power is valid. The condition Φ(n,p,μ) contains Savaré-Toscani’s condition as a special case and much more cases. Precisely, the points (n,p,μ) satisfying Savaré-Toscani’s condition consist of a two-dimensional subset of R3 , and the points satisfying the condition Φ(n,p,μ) consist a three-dimensional subset of R3 . Furthermore, Φ(n,p,μ) gives the necessary and sufficient condition in a certain sense. Finally, the conditions are obtained with a systematic approach.     

Estimating Drift Parameters in a Sub-Fractional Vasicek-Type Process

This study deals with drift parameters estimation problems in the sub-fractional Vasicek process given by dxt=θ(μ−xt)dt+dStH, with θ>0, μ∈R being unknown and t≥0; here, SH represents a sub-fractional Brownian motion (sfBm). We introduce new estimators θ^ for θ and μ^ for μ based on discrete time observations and use techniques from Nordin–Peccati analysis. For the proposed estimators θ^ and μ^, strong consistency and the asymptotic normality were established by employing the properties of SH. Moreover, we provide numerical simulations for sfBm and related Vasicek-type process with different values of the Hurst index H.     

Four-Objective Optimization of an Irreversible Stirling Heat Engine with Linear Phenomenological Heat-Transfer Law

This paper combines the mechanical efficiency theory and finite time thermodynamic theory to perform optimization on an irreversible Stirling heat-engine cycle, in which heat transfer between working fluid and heat reservoir obeys linear phenomenological heat-transfer law. There are mechanical losses, as well as heat leakage, thermal resistance, and regeneration loss. We treated temperature ratio x of working fluid and volume compression ratio λ as optimization variables, and used the NSGA-II algorithm to carry out multi-objective optimization on four optimization objectives, namely, dimensionless shaft power output P¯s, braking thermal efficiency ηs, dimensionless efficient power E¯p and dimensionless power density P¯d. The optimal solutions of four-, three-, two-, and single-objective optimizations are reached by selecting the minimum deviation indexes D with the three decision-making strategies, namely, TOPSIS, LINMAP, and Shannon Entropy. The optimization results show that the D reached by TOPSIS and LINMAP strategies are both 0.1683 and better than the Shannon Entropy strategy for four-objective optimization, while the Ds reached for single-objective optimizations at maximum P¯s, ηs, E¯p, and P¯d conditions are 0.1978, 0.8624, 0.3319, and 0.3032, which are all bigger than 0.1683. This indicates that multi-objective optimization results are better when choosing appropriate decision-making strategies.     

On the Validity of Detrended Fluctuation Analysis at Short Scales

Detrended Fluctuation Analysis (DFA) has become a standard method to quantify the correlations and scaling properties of real-world complex time series. For a given scale ℓ of observation, DFA provides the function F(ℓ), which quantifies the fluctuations of the time series around the local trend, which is substracted (detrended). If the time series exhibits scaling properties, then F(ℓ)∼ℓα asymptotically, and the scaling exponent α is typically estimated as the slope of a linear fitting in the logF(ℓ) vs. log(ℓ) plot. In this way, α measures the strength of the correlations and characterizes the underlying dynamical system. However, in many cases, and especially in a physiological time series, the scaling behavior is different at short and long scales, resulting in logF(ℓ) vs. log(ℓ) plots with two different slopes, α1 at short scales and α2 at large scales of observation. These two exponents are usually associated with the existence of different mechanisms that work at distinct time scales acting on the underlying dynamical system. Here, however, and since the power-law behavior of F(ℓ) is asymptotic, we question the use of α1 to characterize the correlations at short scales. To this end, we show first that, even for artificial time series with perfect scaling, i.e., with a single exponent α valid for all scales, DFA provides an α1 value that systematically overestimates the true exponent α. In addition, second, when artificial time series with two different scaling exponents at short and large scales are considered, the α1 value provided by DFA not only can severely underestimate or overestimate the true short-scale exponent, but also depends on the value of the large scale exponent. This behavior should prevent the use of α1 to describe the scaling properties at short scales: if DFA is used in two time series with the same scaling behavior at short scales but very different scaling properties at large scales, very different values of α1 will be obtained, although the short scale properties are identical. These artifacts may lead to wrong interpretations when analyzing real-world time series: on the one hand, for time series with truly perfect scaling, the spurious value of α1 could lead to wrongly thinking that there exists some specific mechanism acting only at short time scales in the dynamical system. On the other hand, for time series with true different scaling at short and large scales, the incorrect α1 value would not characterize properly the short scale behavior of the dynamical system.     

Measuring Dispersion and Serial Dependence in Ordinal Time Series Based on the Cumulative Paired ϕ-Entropy

The family of cumulative paired ϕ-entropies offers a wide variety of ordinal dispersion measures, covering many well-known dispersion measures as a special case. After a comprehensive analysis of this family of entropies, we consider the corresponding sample versions and derive their asymptotic distributions for stationary ordinal time series data. Based on an investigation of their asymptotic bias, we propose a family of signed serial dependence measures, which can be understood as weighted types of Cohen’s κ, with the weights being related to the actual choice of ϕ. Again, the asymptotic distribution of the corresponding sample κϕ is derived and applied to test for serial dependence in ordinal time series. Using numerical computations and simulations, the practical relevance of the dispersion and dependence measures is investigated. We conclude with an environmental data example, where the novel ϕ-entropy-related measures are applied to an ordinal time series on the daily level of air quality.     

A Novel Algebraic Structure of (α,β)-Complex Fuzzy Subgroups

A complex fuzzy set is a vigorous framework to characterize novel machine learning algorithms. This set is more suitable and flexible compared to fuzzy sets, intuitionistic fuzzy sets, and bipolar fuzzy sets. On the aspects of complex fuzzy sets, we initiate the abstraction of (α,β)-complex fuzzy sets and then define -complex fuzzy subgroups. Furthermore, we prove that every complex fuzzy subgroup is an (α,β)-complex fuzzy subgroup and define (α,β)-complex fuzzy normal subgroups of given group. We extend this ideology to define (α,β)-complex fuzzy cosets and analyze some of their algebraic characteristics. Furthermore, we prove that (α,β)-complex fuzzy normal subgroup is constant in the conjugate classes of group. We present an alternative conceptualization of (α,β)-complex fuzzy normal subgroup in the sense of the commutator of groups. We establish the (α,β)-complex fuzzy subgroup of the classical quotient group and show that the set of all (α,β)-complex fuzzy cosets of this specific complex fuzzy normal subgroup form a group. Additionally, we expound the index of -complex fuzzy subgroups and investigate the (α,β)-complex fuzzification of Lagrange’s theorem analog to Lagrange’ theorem of classical group theory.     

Finite Element Iterative Methods for the 3D Steady Navier–Stokes Equations

In this work, a finite element (FE) method is discussed for the 3D steady Navier–Stokes equations by using the finite element pair Xh×Mh. The method consists of transmitting the finite element solution (uh,ph) of the 3D steady Navier–Stokes equations into the finite element solution pairs (uhn,phn) based on the finite element space pair Xh×Mh of the 3D steady linearized Navier–Stokes equations by using the Stokes, Newton and Oseen iterative methods, where the finite element space pair Xh×Mh satisfies the discrete inf-sup condition in a 3D domain Ω. Here, we present the weak formulations of the FE method for solving the 3D steady Stokes, Newton and Oseen iterative equations, provide the existence and uniqueness of the FE solution (uhn,phn) of the 3D steady Stokes, Newton and Oseen iterative equations, and deduce the convergence with respect to (σ,h) of the FE solution (uhn,phn) to the exact solution (u,p) of the 3D steady Navier–Stokes equations in the H1−L2 norm. Finally, we also give the convergence order with respect to (σ,h) of the FE velocity uhn to the exact velocity u of the 3D steady Navier–Stokes equations in the L2 norm.     

Analyses of pp,Cu–Cu,Au–Au and Pb–Pb Collisions by Tsallis-Pareto Type Function at RHIC and LHC Energies

The parameters revealing the collective behavior of hadronic matter extracted from the transverse momentum spectra of π+, π−, K+, K−, p, p¯, Ks0, Λ, Λ¯, Ξ or Ξ−, Ξ¯+ and Ω or Ω¯+ or Ω+Ω¯ produced in the most central and most peripheral gold–gold (Au–Au), copper–copper (Cu–Cu) and lead–lead (Pb–Pb) collisions at 62.4 GeV, 200 GeV and 2760 GeV, respectively, are reported. In addition to studying the nucleus–nucleus (AA) collisions, we analyzed the particles mentioned above produced in pp collisions at the same center of mass energies (62.4 GeV, 200 GeV and 2760 GeV) to compare with the most peripheral AA collisions. We used the Tsallis–Pareto type function to extract the effective temperature from the transverse momentum spectra of the particles. The effective temperature is slightly larger in a central collision than in a peripheral collision and is mass-dependent. The mean transverse momentum and the multiplicity parameter (N0) are extracted and have the same result as the effective temperature. All three extracted parameters in pp collisions are closer to the peripheral AA collisions at the same center of mass energy, revealing that the extracted parameters have the same thermodynamic nature. Furthermore, we report that the mean transverse momentum in the Pb–Pb collision is larger than that of the Au–Au and Cu–Cu collisions. At the same time, the latter two are nearly equal, which shows their comparatively strong dependence on energy and weak dependence on the size of the system. The multiplicity parameter, N0 in central AA, depends on the interacting system’s size and is larger for the bigger system.     

A Bayesian Analysis of Plant DNA Length Distribution via κ-Statistics

We report an analysis of the distribution of lengths of plant DNA (exons). Three species of Cucurbitaceae were investigated. In our study, we used two distinct κ distribution functions, namely, κ-Maxwellian and double-κ, to fit the length distributions. To determine which distribution has the best fitting, we made a Bayesian analysis of the models. Furthermore, we filtered the data, removing outliers, through a box plot analysis. Our findings show that the sum of κ-exponentials is the most appropriate to adjust the distribution curves and that the values of the κ parameter do not undergo considerable changes after filtering. Furthermore, for the analyzed species, there is a tendency for the κ parameter to lay within the interval (0.27;0.43).