Properties of poly(vinyl chloride) blends with polycarbonates and chlorinated polyethylene

The miscibility of polycarbonates derived from Bisphenol A or 2,5,2′,5′-tetramethyl-Bisphenol A with poly(vinyl chloride), chlorinated poly(vinyl chloride), and vinyl chloride-vinylidene chloride copolymers has been investigated. In miscible blends a shift of the position of the carbonyl absorption in the IR spectra indicates dipolar interactions between the polymers. The miscibility of chlorinated polyethylenes and reduced poly(vinyl chloride)s among each others demonstrates besides the importance of polar groups the influence of their distribution within the polymer chains for the compatibility of the polymers. The investigations on the miscibility have been carried out by differential scanning calorimetry, and by casting films with microscopical observation of the resulting structures.     

用DSC研究线形多嵌段聚氨酯与聚氯乙烯、氯化聚氯乙烯共混相容性

用示差扫描量热法（DSC）研究了线形多嵌段聚氨酯（PU）与聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）共混相容性，说明了PU／VC、PU／CPVC的相容是由于共混物中形成了新的氢键的缘故．聚酯型聚氨酯与PVC、CPVC的相容性要好子聚酸型聚氨酯，CPVC与PU的相容性又要好于PVC．聚氨酯中硬段的引入不利于PU／PVC、PU／CPVC的相容性．     

Compatibility and thermodynamic interaction in random copolymer blends

Some random copolymer blends have been found to be miscible in a certain range of copolymer composition even though any combinations of their corresponding homopolymers are not miscible. The opposite case may exist. These two types of miscibility behaviors have been called miscibility and immiscibility windows, respectively. Such two miscibility behaviors were discussed by application of the equation-of-state theory to copolymer systems. The equation-of-state theory gives two kinds of temperature dependences of the interaction parameter X: (a) a U-shaped curve which is always positive regardless of temperature and (b) a function increasing monotonically from negative to positive values. Infinite molecular weight polymer blends are immiscible over all the temperature in the case (a), while in the case (b) two polymers are miscible below a temperature at which X=0. Applying the equation-of-state theory to random copolymer blends in which miscibility changes with the copolymer composition at a certain temperature to be immiscible → miscible → immiscible, two types of dependences of the temperature-X curve can be obtained: (1) (a) → (b) → (a) dependent on the copolymer composition and (2) (b) regardless of the copolymer composition. For the blends in which miscibility changes with the copolymer composition to be miscible → immiscible → miscible, there can be two types: (3) (b) → (a) → (b) and (4) (b) regardless of the copolymer composition. It may be concluded that socalled miscibility and immiscibility windows should be defined by the types (1) and (3), respectively. The equation-of-state theory for random copolymer systems was applied to the real systems. The blends of poly(vinyl acetate-co-vinyl chloride) and poly(ethylene-co-vinyl acetate) were of the type (1), while it was suggested that the blends of poly(vinyl acetate-co-vinyl chloride) and poly(isobutyl methacrylate-co- butyl methacrylate) may be of the type (4) though this system behaved like an immiscibility window at a certain temperature.     

Binary blends based on poly(vinyl chloride) and multi-block copolymers containing poly(ϵ-caprolactone) and poly(ethylene glycol) segments

Binary blends based on poly(vinyl chloride) (PVC) were prepared both by casting from tetrahydrofuran (THF) and by mixing in the melt form, in a discontinuous mixer, PVC and multi-block copolymers containing poly(ϵ-caprolactone) (PCDT) and poly(ethylene glycol) (PEG) segments. PCDT-PEG copolymers were synthesized using a polycondensation reaction where the α,ω-bis-chloroformate of an oligomeric poly(ϵ-caprolactone) diol terminated (PCDT) and oligomeric PEG were employed as macromonomers. For comparison purposes, blends PVC with starting oligomers as well as with mixtures containing a typical low molecular plasticizer, dioctylphthalate (DOP), were also prepared. The copolymer miscibility was studied by differential scanning calorimetry (DSC) and FT-IR spectroscopy. The blend morphology was investigated by polarized light microscopy (PLM). A higher miscibility with PVC was observed for copolymers compared to PEG.     

Compatibility of poly(vinyl chloride) with polyalkyleneoxides. II. Poly(propylene oxide) and poly(tetramethylene oxide)

This study [Part II of a series dealing with the compatibility of polyalkyleneoxides with poly(vinyl chloride)] examines blends of PVC with poly(propylene oxide) (PPrO) and poly(tetra-methylene oxide) (PTMO), covering the entire composition range. Morphological, dynamic mechanical and thermal properties investigated indicate that PVC/PPrO blends are incompatible, whereas the PVC/PTMO system shows miscibility in the melt. For this polyblend and at high polyether compositions where the Hoffman–Weeks analysis can be applied, T_m equilibrium data allow the determination of the thermodynamic interaction parameter, χ₁₂ = ?0.15. Experimental compatibility data of all polyether-PVC pairs investigated in Parts I and II are also used to test various blend miscibility prediction schemes, using solubility parameter theory and recent theory on copolymer-copolymer miscibility.     

Head to Head Polymers. 42. Head to Head Poly(Vinyl Halide) Blends: Thermal and Degradation Behavior

Abstract

Improved halogenation techniques for poly(1, 4-butadiene) have made well-defined head to head poly(vinyl chloride) and head to head poly(vinyl bromide) accessible in larger quantities. This allowed the preparation and study of blends of poly(vinyl chloride) or poly(vinyl bromide) with polycaprolactone and poly(methyl methacrylate); blends were also prepared between the poly(vinyl halides). The thermal behavior and the thermal degradation behavior of these blends were investigated. It was confirmed that head to head and head to tail poly(vinyl chloride) are immiscible over almost the entire range of compositions.     

Miscibility and surface segregation in PVC/polyester blends—The influence of chain architecture and composition

Four poly(butylene adipate) (PBA) polyesters, the structure ranging from linear to highly branched, were synthesized and solution casted with poly(vinyl chloride) (PVC) in 20 or 40 wt % concentrations to evaluate the influence of polyester chain architecture on miscibility, surface segregation, and mechanical properties. The miscibility of PVC and polyesters is based on specific interactions between the carbonyl group in the polyester and PVC. These interactions cause a shift in the carbonyl absorption band in the FTIR spectra. The shifting of the carbonyl absorption band was more significant for all the 40 wt % blends compared with the blends containing 20 wt % of the same polyester. In the 20 wt % blends surface segregation and enrichment of polyester at the blend surface increased as a function of branching. However, all the films containing 40 wt % of polyester had similar surface composition. This is explained by better miscibility and stronger intermolecular interactions in the 40 wt % blends, which counteract the effect of branching on the surface segregation. High degree of branching resulted in poor miscibility with PVC and poor mechanical properties. A linear or slightly branched polyester structure, however, resulted in good miscibility and desirable blend properties. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1552–1563, 2007     

FT‐IR Investigation into the miscible interactions in new materials for optical devices

In this article we determine the miscibility of azobenzene derivative (poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀)/poly(vinyl acetate) (PVAc) and azobenzene derivative/poly(vinyl chloride) (PVC) blends using Fourier Transform infrared (FT‐IR) spectroscopy. With this method we can clearly identify the exact interactions responsible for miscibility. In the azobenzene derivative 50:50PVAc blend new peaks were evident at 2960, 2890, 1237 and 959 cm^?1, these peaks depict miscible interactions. These wavenumbers indicate that the miscible interactions occurring are from the C? H stretching band, the vinyl acetate C?O, conjugated to the ester carbonyl, the cis‐transformation N?N stretch frequency and the acetate ester weak doublet. The azobenzene derivative 80:20PVC blend display peaks identical in profile to the blend homopolymers, indicating no miscible interactions. However, this could be due to overlapping of peaks within the same wavenumber region, making resolution difficult. This research demonstrates FT‐IR can deduce favorable interactions for miscibility and therefore numerous miscible blends can successfully be calculated if possessing the same groups responsible for miscibility. This paves the way for a new generation of designer optical materials with the desired properties. Copyright © 2003 John Wiley & Sons, Ltd.     

Compatibility of Poly(vinyl chloride) with Polyalkyleneoxides. I. Poly(methylene oxide) and Poly(ethylene oxide)

The compatibility of poly(vinyl chloride) (PVC) with linear polyethers is examined over the entire composition range. This study examines blends with poly(methylene oxide) (PMO) and poly(ethylene oxide) (PEO) of medium (MMW) and high (HMW) molecular weight. The techniques used are dynamic mechanical analysis, DSC, and optical microscopy (phase contrast and polarizing). The results indicate that all polyethers show limited miscibility in the melt at high PVC contents. Proper analysis of the T_m data using the Kwei-Frisch and Hoffman-Weeks procedures allows the determination of the thermodynamic interaction parameter, which is found to be close to zero for all pairs of blends.     

Δχ effects on the miscibility of polymer blends

The Δχ effect on the miscibility of polymer blends prepared by solution-casting has been investigated using the mixture of poly(methyl methacrylate)(PMMA) with poly(vinyl acetate) (PVAc). The PMMA/PVAc blends have been prepared by casting from eleven different solutions. The Δχ effect of the solution–cast PMMA/PVAc blends was discussed in terms of Hansen's specified solubility parameters. It was found that the miscibility of the blends could be defined mainly by the solubility parameter contributed by the hydrogen–bonding of a solvent.     

Blends of a chlorinated poly(vinyl chloride) with a polyurethane

Blends of a 67% chlorinated poly(vinyl chloride) with a low-molecular-weight polyurethane are partially miscible over the 0–80% urethane compositional range. A single, composition-dependent glass transition temperature is observed from both DSC and dynamic mechanical measurements. The blends exhibit a cocontinuous morphology with domain sizes varying from 0.15 to 1.5 μm. These results point out that the relation between miscibility characteristics and domain size is a complex one, not only dependent upon the degree of miscibility, but also on the nature of the blend components and the test method used. Thus the domain size for a certain degree of miscibility is not a universal constant as was previously believed. The melt rheology of the blends as a function of composition is strongly “positive deviating” from the log additivity rule and fits a simplified version of the McAllister model. The strongly “positive deviating” rheological behavior of the blends is most likely a result of the cocontinuous morphology which makes the system behave as a highly entangled network.     

Structure of reactively extruded rigid PVC/PMMA blends

A novel route for producing polymer blends by reactive extrusion is described, starting from poly (vinyl chloride)/methyl methacrylate (PVC/MMA) dry blend and successive polymerization of MMA in an extruder. Small angle X‐ray scattering (SAXS) measurements were applied to study the monomer's mode of penetration into the PVC particles and to characterize the supermolecular structure of the reactive poly(vinyl chloride)/poly(methyl methacrylate) (PVC/PMMA) blends obtained, as compared to the corresponding physical blends of similar composition. These measurements indicate that the monomer molecules can easily penetrate into the PVC sub‐primary particles, separating the PVC chains. Moreover, the increased mobility of the PVC chains enables formation of an ordered lamellar structure, with an average d‐spacing of 4.1 nm. The same characteristic lamellar structure is further detected upon compression molding or extrusion of PVC and PVC/PMMA blends. In this case the mobility of the PVC chains is enabled through thermal energy. Dynamic mechanical thermal analysis (DMTA) and SAXS measurements of reactive and physical PVC/PMMA blends indicate that miscibility occurs between the PVC and PMMA chains. The studied reactive PVC/PMMA blends are found to be miscible, while the physical PVC/PMMA blends are only partially miscible. It can be suggested that the miscible PMMA chains weaken dipole–dipole interactions between the PVC chains, leading to high mobility and resulting in an increased PVC crystallinity degree and decreased PVC glass transition temperature (T_g). These phenomena are shown in the physical PVC/PMMA blends and further emphasized in the reactive PVC/PMMA blends. Copyright © 2005 John Wiley & Sons, Ltd.     

Degradation of polymer mixtures. IV. Blends of poly(vinyl acetate) with poly(vinyl chloride) and other chlorine-containing polymers

The degradation of the binary polymer blends, poly(vinyl acetate)/poly(vinyl chloride), poly(vinyl acetate)/poly(vinylidene chloride) and poly(vinyl acetate)/polychloroprene has been studied by using thermal volatilization analysis, thermogravimetry, evolved gas analysis for hydrogen chloride and acetic acid, and spectroscopic methods. For the first two systems named, strong interaction occurs in the degrading blend, but the polychloroprene blends showed no indication of interaction. In the PVA/PVC and PVA/PVDC blends, hydrogen chloride from the chlorinated polymer causes substantial acceleration in the deacetylation of PVA. Acetic acid from PVA destabilizes PVC but has little effect in the case of PVDC because of the widely differing degradation temperatures of PVA and PVDC. The presence of hydrogen chloride during the degradation of PVA results in the formation of longer conjugated sequences, and the regression in sequence length at high extents of deacetylation found for PVA degraded alone is not observed.     

Miscibility behaviour of blends of a thermoplastic polyester polyurethane with vinyl polymers

A method based on the intrinsic viscosities of transfer has been used to predict miscibility of polymer blends. This method has been applied to study the change in the phase behaviour of a microphase separated polyester polyurethane (PSPU) on blending with polyvinyl chloride (PVC), polyvinyl acetate (PVAc) and a vinyl chloride-vinyl acetate copolymer (VCVAc). The PVC/PSPU blends are found to exhibit complete miscibility over the entire composition range. PVAc/PSPU blends show immiscibility while VCVAc/PSPU blends show partial miscibility. Thermal analysis and scanning electron microscopic studies of the blend films have confirmed the results evaluated on the basis of the viscosity method.     

Thermorheological studies on polymeric blends

Two petroleum-derived aromatic hydrocarbon resins (HRs) were blended (1:1) with expanded polystyrene (EPS) waste and small amounts (up to 10 mass%) of poly(vinyl chloride) (PVC) to increase both the lustrous carbon (LC) yield and softening point of the blends without any deterioration of their rheological characteristics. The blends were prepared and tested for LC content, softening points, shear stress and apparent viscosity to check their applicability as LC precursors under industrial conditions. The properties of polystyrene compositions with bitumen fractions depend primarily on composition and viscosity of oil fraction. Additional modification by poly(vinyl chloride) improves the blends’ properties, like bright coal content, softening point and viscosity, and opens new possibilities of plastics’ wastes utilization.     

Enthalpy relaxations in polymer blends and block copolymers: Influence of domain size

It is now well known that enthalpy relaxation measurements can be used to establish polymer-polymer blend phase behavior when the glass transition temperatures of the two polymers are virtually coincident. In the most simple cases, the aging kinetics of an immiscible blend will be representative of the pure polymers superimposed upon each other. However, in many cases the situation is more complicated because of the presence of interface material. In this paper the relation between enthalpy recovery peak separation, domain size and interface thickness is considered. The discussion is based on relaxation experiments involving di-block copolymers of styrene and 2-vinyl pyridine, blends of polystyrene and poly(2-vinyl pyridine) and blends of poly(vinyl chloride) and poly(isopropyl methacrylate). If the amount of material in the interface is too large due to either a small average domain size or a thick interface no peak separation will occur. The first situation is found for the microphase separated block copolymer system whereas the second possibility occurs for blends of polymers which are on the verge of miscibility like poly(vinyl chloride) and poly(isopropyl methacrylate).Presented in part at the Sixth International Seminar on Polymer Physics Relaxation in Polymers, Gomadingen, October 3–8, 1988, F.R.G.     

Miscibility of poly(vinyl chloride) with chitin derivatives having poly(2-methyl-2-oxazoline) side chains

Binary blends of poly(vinyl chloride) (PVC) and chitin-graft-poly(2-methyl-2-oxazoline) showed miscibility in the blend fraction range of the latter lower than ca. 10 wt.-%. The glass transition temperature of PVC, which was determined by differential scanning calorimetry, changed to lower temperatures with increasing modified chitin contents up to 10 wt.-%. Segmental interaction between PVC and the graft copolymer was confirmed by the carbonyl stretching band shift in the FT-IR analysis.     

Microscopic FT-IR analysis of blends from functionalized polyolefins and poly(vinyl chloride) or polystyrene

Binary mixtures consisting of ethylene-propylene copolymer functionalized with diethyl maleate (FEP) and poly(vinyl chloride) or polystyrene have been studied by means of the microscope-FT-IR system. Parallel DSC measurements have been carried out on the functionalized ethylene-propylene copolymer/poly(vinyl chloride) mixtures. Intermolecular interactions involving the carbonyl of the ester groups of the copolymer and the methin hydrogen of poly(vinyl chloride), through hydrogen bonding, have been evidenced in the various microareas of the samples. Intensity of these effects depends on composition in different domains of the blends. An increase of the gauche sequences with respect to the long and short trans sequences of poly-(vinyl chloride) chains has been detected with increasing the content of FEP. The partial compatibility of FEP/poly (vinyl chloride) blends has been confirmed by DSC measurements.     

Blends of natural and synthetic polymers: A new route to novel biomaterials

Blends of natural and synthetic polymers were studied for potential applications in the biomedical field. Collagen and hyaluronic acid were mixed in aqueous solution with poly(vinyl alcohol) and poly(acrylic acid). The properties of the blends were studied by differential scanning calorimetry and dynamic mechanical thermal analysis. Some methods were also investigated to enhance the miscibility of the polymers in these blends.     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] by incorporation of carbon dioxide into epoxide polymer and the miscibility behavior of its blends with poly(methyl methacrylate) or poly(vinyl chloride)

This study was related to the investigation of the chemical fixation of carbon dioxide to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer‐to‐polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] [poly(DOMA‐co‐EA)] from poly(glycidyl methacrylate‐co‐ethyl acrylate) [poly(GMA‐co‐EA)] and CO₂, quaternary ammonium salts showed good catalytic activity. The films of poly(DOMA‐co‐EA) with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) blends were cast from N,N′‐dimethylformamide solution. The miscibility of the blends of poly(DOMA‐co‐EA) with PMMA or PVC have been investigated both by DSC and visual inspection of the blends. The optical clarity test and DSC analysis showed that poly(DOMA‐co‐EA) containing blends were miscible over the whole composition range. The miscibility behaviors were discussed in terms of Fourier transform infrared spectra and interaction parameters based on the binary interaction model. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1472–1480, 2001