Carbene complexes : IV. Far infrared and 31P NMR spectra of palladium and platinum carbene complexes

Infrared bands mainly associated with v(M—X₂) stretching modes (M = Pd or Pt, and X = Cl, Br, or P) have been identified in the spectra of 35 carbene complexes. Based on these results and on |¹J| (³¹ P—¹⁹⁵ Pt) the trans-influence of the carbene ligands is assessed.     

Application of the impulse oscillation model for modelling the formation of peroxocarbonates via carbon dioxide reaction with dioxygen transition metal complexes: A comparison with the experimental results obtained for Rh(η2-O2)ClP3 [P=phosphane ligand]

The reaction of CO₂ with (η²-dioxygen)-transition metal complexes to give peroxocarbonates has been modelled using the Impulse Oscillation Model (IOM).¹ In accordance with our experimental findings concerning the reactivity of P₃ClRh(η²-O₂) (P=phosphane ligand) complexes towards carbon dioxide, application of the model to this reaction shows that the insertion of carbon dioxide into the OO bond is the preferred pathway. In fact, the probability for CO₂ insertion into the OO bond equals maximum to 0.98 while into the M–O bond equals to 0.02. The concordance of calculated and experimental stretching frequencies indicates the possibility of identifying, through the vibration modes, proper ligands and metal systems that behave as selective catalysts at molecular level.     

Ligand behaviour of P-functionally substituted organotin halides: palladium(II) and platinum(II) complexes with Ph2PCH2CH2SnCl3

The P-functional organotin chloride Ph₂PCH₂CH₂SnCl₃ reacts with [(COD)MCl₂] and trans-[(Et₂S)₂MCl₂] (M=Pd, Pt) in molar ratio 1:1 to the zwitterionic complexes [(COD)M⁺(Cl)(PPh₂CH₂CH₂Sn⁻Cl₄)] (1: M=Pd; 2: M=Pt) and trans-[(Et₂S)₂M⁺(Cl)(PPh₂CH₂CH₂Sn⁻Cl₄)] (3: M=Pd; 4: M=Pt). The same reaction with [(COD)Pd(Cl)Me] yields under transfer of the methyl group from palladium to tin the complex [(COD)M⁺(Cl)(PPh₂CH₂CH₂Sn⁻MeCl₃)] (5) which changes in acetone into the dimeric adduct [Cl₂Pd(PPh₂CH₂CH₂SnMeCl₂·2Me₂CO)]₂ (6). In molar ratio 2:1 Ph₂PCH₂CH₂SnCl₃ reacts with [(COD)MCl₂] to the complexes [Cl₂Pd(PPh₂CH₂CH₂SnCl₃)₂] (7: M=Pd, mixture of cis/trans isomer; 8: M=Pt, cis isomer). In a subsequent reaction 8 is transformed in acetone into the 16-membered heterocyclic complex cis-[Cl₂Pt(PPh₂CH₂CH₂)₂SnCl₂]₂ (9). trans-[(Et₂S)₂PtCl₂] and Ph₂PCH₂CH₂SnCl₃ in molar ratio 1:2 yields the zwitterionic complex [(Et₂S)M⁺(Cl)(PPh₂CH₂CH₂SnCl₃)(PPh₂CH₂CH₂Sn⁻Cl₄)] (10). The results of crystal structure analyses of 1, 3, 6, 9 and of the adduct of the trans-isomer of 7 with acetone (7a) are reported. ³¹P- and ¹¹⁹Sn-NMR data of the complexes are discussed.     

Stereochemistry of the insertion of disubstituted alkynes into the metal aminocarbyne bond in diiron complexes

Terminal alkynes (HCCR^′) (R^′=COOMe, CH₂OH) insert into the metal-carbyne bond of the diiron complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCMe)(Cp)₂][SO₃CF₃] (R=Xyl, 1a; CH₂Ph, 1b; Me, 1c; Xyl=2,6-Me₂C₆H₃), affording the corresponding μ-vinyliminium complexes [Fe₂{μ-σ:η³-C(R^′)CHCN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, R^′=COOMe, 2; R=CH₂Ph, R^′=COOMe, 3; R=Me, R^′=COOMe, 4; R=Xyl, R^′=CH₂OH, 5; R=Me, R^′=CH₂OH, 6). The insertion is regiospecific and C-C bond formation selectively occurs between the carbyne carbon and the CH moiety of the alkyne. Disubstituted alkynes (R^′CCR^′) also insert into the metal-carbyne bond leading to the formation of [Fe₂{μ-σ:η³-C(R^′)C(R^′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R^′=Me, R=Xyl, 8; R^′=Et, R=Xyl, 9; R^′=COOMe, R=Xyl, 10; R^′=COOMe, R=CH₂Ph, 11; R^′=COOMe, R=Me, 12). Complexes 2, 3, 5, 8, 9 and 11, in which the iminium nitrogen is unsymmetrically substituted, give rise to E and/or Z isomers. When iminium substituents are Me and Xyl, the NMR and structural investigations (X-ray structure analysis of 2 and 8) indicate that complexes obtained from terminal alkynes preferentially adopt the E configuration, whereas those derived from internal alkynes are exclusively Z. In complexes 8 and 9, trans and cis isomers have been observed, by NMR spectroscopy, and the structures of trans-8 and cis-8 have been determined by X-ray diffraction studies. Trans to cis isomerization occurs upon heating in THF at reflux temperature. In contrast to the case of HCCR^′, the insertion of 2-hexyne is not regiospecific: both [Fe₂{μ-σ:η³-C(CH₂CH₂CH₃)C(Me)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, 13; R=Me, 15) and [Fe₂{μ-σ:η³-C(Me)C(CH₂CH₂CH₃)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, 14, R=Me, 16) are obtained and these compounds are present in solution as a mixture of cis and trans isomers, with predominance of the former.     

Palladium(O)-mediated Formation of γ-Methylene-γ-butyrolactone from allyl 4-pentenoate

Synthetic organic reaction by means of transition metal carboxylate complexes continues to be a subject of active interest,¹ in which the transition metal carboxylate complexes are generally generated by oxidative addition of allylic esters to low-valent transition metal complexes. It also relates closely to the utilization of carbon dioxide in organic synthesis by means of transition metal complexes, because carbon dioxide insertion into the transition metal-carbon bonds produces the transition metal carboxylate complexes.² Very recently we have reported the formation of γ-butyroiactone by the reaction of bis (π-allyl)nickel (II) with carbon dioxide via a π-allynickel (II) 3-butenoate complex.³ Here we report Pd(PPh₃)₄- induced     

The vibrational spectra of complexes with planar monothio-oxamides—I. The Ni(II), Pd(II), Pt(II), Cu(II) and Zn(II) complexes of N,N′-dimethylmonothio-oxamide

The new complexes M(LH)₂ (M = Pd,Pt), ML(M = Pd,Cu) and ML · H₂O (M = Ni,Zn), where LH₂ = N,N′-dimethylmonothio-oxamide, have been prepared. The complexes were characterized by metal analyses, thermal methods and spectral (i.r., Raman, u.v.—vis.) studies. The vibrational analyses of the complexes are given using NH/ND, CH₃/CD₃ and metal isotopic substitutions. The Ni(II), Pd(II), Pt(II) and Cu(II) compounds are square planar. The monoanion LH⁻ shows a chelated bidentate S,O-coordination, while the doubly deprotonated L²⁻ acts as a bridging S,N/N,O-tetradentate ligand giving polymeric structures.     

Silicon containing new salicylaldimine Pd(II) and Co(II) metal complexes as efficient catalysts in transformation of carbon dioxide (CO2) to cyclic carbonates

A new series of metal complexes of salicyladimine ligands with Pd(II) and Co(II) have been prepared and characterized by different techniques (elemental analysis, UV-vis, FT-IR, ¹H NMR spectra, magnetic susceptibility measurements). Electronic spectra and magnetic susceptibility measurements reveal square planar geometry for Pd(II) metal complex and tetrahedral geometry for Co(II) metal complex. The synthesized Pd(II) and Co(II) complexes were also tested as catalysts for the formation of cyclic organic carbonates from carbon dioxide and liquid epoxides which served as both reactant and solvent. The results showed that the [M(L₃)₂] (M = Pd or Co) complexes bearing 5-methyl substituent on the aryl ring are more efficient than the other Pd(II) and Co(II) metal complexes for the formation of cyclic organic carbonates from carbon dioxide. These catalysts, [Pd(L₃)₂] and [Co(L₃)₂] complexes and location (p-position of phenoxy) of electron donating methyl substituent in particular, effectively promote the of carbon dioxide activation with liquid epoxides under solvent-free homogeneous conditions. Furthermore, [Pd(L₃)₂] can be reused more than eight times with a minimal loss of its original catalytic activities.     

15N-NMR. and 31P-NMR. Studies of palladium and platinum complexes

¹⁵N-NMR. parameters for the complexes trans-[MCl₂ (¹⁵NH₂ (CH₂)₅CH₃)L] are reported; M = Pt, Pd, L = PBu, PMePh₂, P (p-CH₃? C₆H₄)₃, AsBuⁿ₃, AsMePh₂, As (p-CH₃C₆H₄)₃, NH₂ (CH₂)₅CH₃ and (for Pt) C₂H₄. For both metals, the NMR. parameters depend on the trans-influence of the ligand L. The values ¹J (¹⁹⁵Pt, ¹⁵N) vary from 138 to 336 Hz and can be shown to correlate with the values ¹J (¹⁹⁵Pt, ³¹P) in the complexes trans-[PtCl₂ (PBu)L]. There is a linear relation between the ¹⁵N chemical shifts in the complexes of the two metals. The reactions of the complexes sym-trans-[M₂Cl₄L₂], M = Pd, Pt, L = a tertiary phosphine or arsine, with neutral ligands are described. ¹⁹⁵Pt-, ³¹P- and ¹³C-NMR. data are reported.     

Computational Studies of Coinage Metal Anion M− + CH3X (X = F,Cl, Br,I) Reactions in Gas Phase

We characterized the stationary points along the nucleophilic substitution (S_N2), oxidative insertion (OI), halogen abstraction (XA), and proton transfer (PT) product channels of M⁻ + CH₃X (M = Cu, Ag, Au; X = F, Cl, Br, I) reactions using the CCSD(T)/aug-cc-pVTZ level of theory. In general, the reaction energies follow the order of PT > XA > S_N2 > OI. The OI channel that results in oxidative insertion complex [CH₃–M–X]⁻ is most exothermic, and can be formed through a front-side attack of M on the C-X bond via a high transition state OxTS or through a S_N2-mediated halogen rearrangement path via a much lower transition state invTS. The order of OxTS > invTS is inverted when changing M⁻ to Pd, a d¹⁰ metal, because the symmetry of their HOMO orbital is different. The back-side attack S_N2 pathway proceeds via typical Walden-inversion transition state that connects to pre- and post-reaction complexes. For X = Cl/Br/I, the invS_N2-TS’s are, in general, submerged. The shape of this M⁻ + CH₃X S_N2 PES is flatter as compared to that of a main-group base like F⁻ + CH₃X, whose PES has a double-well shape. When X = Br/I, a linear halogen-bonded complex [CH₃−X∙··M]⁻ can be formed as an intermediate upon the front-side attachment of M on the halogen atom X, and it either dissociates to CH₃ + MX⁻ through halogen abstraction or bends the C-X-M angle to continue the back-side S_N2 path. Natural bond orbital analysis shows a polar covalent M−X bond is formed within oxidative insertion complex [CH₃–M–X]⁻, whereas a noncovalent M–X halogen-bond interaction exists for the [CH₃–X∙··M]⁻ complex. This work explores competing channels of the M⁻ + CH₃X reaction in the gas phase and the potential energy surface is useful in understanding the dynamic behavior of the title and analogous reactions.     

Ethylene polymerization with novel phenoxy-imine catalysts bearing 4-vinylphenyl group

This contribution reports ethylene polymerization behavior of titanium complexes incorporating bis(phenoxyimine) ligands. Six phenoxy-imine Ti(IV) complexes {6-R1-2-[CH=N(2,6-difluoro-3,5-diR2-4-R3Ph)]C6H3O}2TiCl2(1: R1 = H, R2 = H, R3 = H; 2: R1 = H, R2 = H, R3 = 4-vinylphenyl; 3: R1 = CH3, R2 = H, R3 = H; 4: R1 = CH3, R2 = H, R3 = 4-vinylphenyl; 5: R1 = CH3, R2 = F, R3 = H; 6: R1 = CH3, R2 = F, R3 = 4-vinylphenyl) have been synthesized and evaluated for ethylene polymerization using dried MAO(simplified as DMAO) as cocatalyst. An obvious catalytic heterogeneity of Cat 2(Complex 2/DMAO) towards ethylene polymerization was observed, which was illustrated by decreased activity, multimodal molecular weight distribution and partially improved particle morphology comparing with Cat 1. Moreover, Cat 3 exhibits "living" characteristics in the process under certain conditions(25 °C, less than 20 min). Otherwise, the moderate to high ethylene polymerization activity of ca. 105-106 g PE/(mol Ti·h) and high molecular weight(Mw = 105-106) of polyethylene can be obtained by changing the skeleton structure of these complexes.     

1,2- and 1,7-Dicarba-closo-dodecarborane(12)platinum(II) complexes formed through metal—carbon σ bonds: cis- and trans-monohydrido derivatives

New neutral platinum(II) monohydridocarborane complexes of general formula cis- and trans-L₂PtH(σ-carb), where L = (C₂H₅)₃P, (C₆H₅)₃P, (C₆H₅)₂(CH₃)P, (C₆H₅)(CH₃)₂P and carb = 2-R-1,2- or 7-R-1,7-B₁₀C₂H₁₀^? (R = H, CH₃, C₆H₅), have been prepared. The configurations of the complexes obtained have been assigned by ¹H NMR spectroscopy. The _cis-monohydridocarborane complexes here reported are the first examples of neutral _cis-monohydrido derivates of platinum(II) containing platinum—carbon σ bonds. ¹H NMR chemical shifts and coupling constants of the prepared complexes are also reported, and used in a tentative evaluation of the _trans-influence of the carbonage ligands.     

Palladium carbene complexes as persistent radicals

A series of palladium(ii) radical carbene complexes, [PC˙(sp²)P]PdI, [PC˙(sp²)P]PdBr, and [PC˙(sp²)P]PdCl (PC(sp³)H₂P = bis[2-(di-iso-propylphosphino)-phenyl]methane), is described. Compound [PC˙(sp²)P]PdI dimerizes to {[PC(sp²)P]PdI}₂ in the solid state, akin to the formation of Gomberg''s dimer. While the bromo and the iodo derivatives could be obtained from the oxidation of [PC(sp²)P]Pd(PMe₃) by the respective dihalogens, a halogen transfer reaction from CH₂Cl₂ was used for the formation of [PC˙(sp²)P]PdCl. The halogen transfer from CH₂X₂ (X = Cl, Br, I) could be used to obtain all three radical carbene palladium complexes and also allowed the isolation of [PC(CH₂)P]Pd(PMe₃), which is the result of methylene group transfer from CH₂X₂. Compound [PC(CH₂)P]Pd(PMe₃) was independently synthesized from [PC(CH₃)HP]PdCl₂, which contains a supporting ligand analogous to that of the radical carbene complexes but has one of the hydrogen atoms replaced by a methyl group. All three carbene radical species abstract a hydrogen from 9,10-dihydroanthracene or ⁿBu₃SnH.     

Some reactions of allene and acetylenes with vinylplatinum and methylpalladium complexes

The reactions of cationic vinylplatinum complexes, Pt(R¹CCHR²(PEt₃)₂-(acetone)⁺ PF₆^?, with allene and activated acetylenes yield π-allyl and δ-butadienyl products, respectively. Similar reactions of Pd(CH₃)X(Diphos) (X = Cl, NO₃, solvent, Diphos = 1,2-bis(diphenylphosphino)ethane) with acetylenes are also described. Factors affecting these insertion reactions are discussed.     

Synthesis and structures of new 1,3,6,2-dioxazaborocanes containing substituents in the ocane fragment

New 1,3,6,2-dioxazaborocanes R¹N(CHR³CR⁴R²O)(CHR⁶CHR⁵O)BX (1–11, X = Ph, 4-MeC₆H₄, Me; R¹ = Me, PhCH₂; R², R³, R⁴, R⁵, R⁶ = H, Ph) were synthesized by the reactions of aryl- or methylboronic acids with dialkanolamines. The treatment of (Me₂NCH₂CH₂O)₃B (15) with MeN(CH₂CH₂OH)(CH₂CPh₂OH) afforded 2-[2-(dime-thylamino)ethoxy]-1,3,6,2-dioxazaborocane (12). 2-Fluoro-1,3,6,2-dioxazaborocanes R¹N(CHR³CHR²O)(CH₂CH₂O)BF (13: R¹ = PhCH₂, R² = R³ = H; 14: R¹ = Me, R² = R³ = Ph, threo) were synthesized by the reaction of bis(trimethylsilyl) ethers of the corresponding dialkanolamines with BF₃·Et₂O. The new borocanes can be used for the synthesis of the corre-sponding germanium derivatives PhCH₂N(CH₂CH₂O)₂GeX₂ (16, X = OEt; 17, X = Cl), as exemplified by the reaction of compound 6. The structures of erythro-MeN(CH₂CH₂O)(CHPhCHPhO)BPh (3), threo-MeN(CH₂CH₂O)(CHPhCHPhO)BPh (4), erythro-MeN(CH₂CH₂O)(CHPhCHPhO)B(4-MeC₆H₄) (8), and PhCH₂N(CH₂CH₂O)₂BF (13) were established by X-ray diffraction. The coordination polyhedra of the boron atoms in these complexes can be described as distorted tetrahedra. The boron-nitrogen distances (1.705(7)–1.723(3) Å) provide unambiguous evidence for the presence of the B←N transannular interaction in these compounds. The structures of the resulting borocanes containing phenyl substituents at the carbon atoms of the ocane skeleton were studied by NMR spectroscopy and quantum chemical density functional theory calculations.     

Carbamoyl and alkoxycarbonyl complexes of palladium(II) and platinum(II)

Carbamoyl and alkoxycarbonyl complexes of palladium(II) and platinum(II) of the type M(pnp)(CONHR)Cl (pnp = 2,6-bis(diphenylphosphinomethyl)pyridine; M Pd, R  C₆H₅, p-CH₃C₆H₄, p-CH₃OC₆H₄, C₆H₁₁, t-Bu; M  Pt, R  C₆H₅), Pd(pnp)[CON(Pr)₂]Cl (Pr = propyl), M(pnp)(COOR)Cl (M  Pd, R  C₆H₅, CH₃; M  Pt, R  CH₃), Pd(pnp)(COOCH₃)₂ result from reaction of M(pnp)Cl₂ with carbon monoxide and amines or alkoxides at room temperature and atmospheric pressure.The carbamoyl complexes react with bases to give urethane or diphenylurea depending upon the experimental conditions.     

Cyclic Voltammetry of 1,1′-bis(Diarylphosphino)metallocenes and Their Complexes with Palladium(II)

Cyclic voltammetry is used to study 1,1-bis(diarylphosphino)metallocenes (PP) [M(⁵-C₅R₄PAr₂)₂] (M = Fe; R = H; Ar = Ph, o-MeOC₆H₄, o-PrOC₆H₄, C₆F₅; M = Fe, R = Me, Ar = Ph; M = Ru, Os; R = H, Ar = Ph) and such Pd(II) complexes with these as neutral dichlorides [(PP)PdCl₂], dication solvates [(PP)Pd(L) _n ]²⁺ (L = H₂O, MeCN), and dication triphenylphosphines containing metal–Pd bond (PP)Pd(PPh₃)]²⁺. The nature of the metallocene metal atom and aryl substituents at phosphor atoms and the formation of a metal–Pd bond affect redox potentials of these compounds. 1,1-bis(Diphenylphosphino)metallocenes [M(⁵-C₅H₄PPh₂)₂] (M = Fe, Ru, Os) feature similar electron-donating properties. Oxidation potentials of Pd(II) complexes can serve as a criterion indicating the formation of a metal–Pd bond.     

Olefin isomerisation by group via metals

2-(MeR¹CCR²)-and 2-(CH₂CR¹CH₂CH₂)-pyridine (R¹,R² = H or Me) undergo 1,2-double-bond shifts and 2-(CH₂CHCH₂CH₂CH₂)-pyridine undergoes a 1,3-double-bond shift on displacement of norbornadiene from [M(CO)₄norb] (M = Cr, Mo or W) to give complexes of the type [M(CO)₄LL'] (LL' = 2-(allyl)or 2-(substituted allyl)-pyridine), which do not exhibit conformational isomerism involving the plane of the coordinated olefin.     

Bis(ligand)metall-komplexe von nickel,palladium und platin mit cyclischen liganden vom divinylboran-typ

Nine complexes of type ML₂ with M = Ni, Pd, Pt and L = X(CHCH)₂BC₆H₅ (X = (CH₃)₂C, (CH₃)₂Si, (CH₂)₂) are described. The X-ray structural analysis of Ni[(CH₃)₂Si(CHCH)₂BC₆H₅]₂ and the ¹H and ¹¹B NMR spectra demonstrate a sandwich-type bis(η⁵-divinylborane)metal structure with C₂ molecular symmetry. All complexes show exceptional thermal stability as compared to the corresponding bis(1,5-cyclooctadienyl)metal complexes. In the ¹H NMR spectra internal rotation of the two ligands with respect to each other is observed for two Pd complexes and the Pt complexes at room temperature.     

Synthesis and reactivity of novel cationic organonickel(II) compexes. X-ray structure of [bis(2-diphenylphosphinoethyl)phenylphosphinenickel-O-methylsulfinate]tetraphenylborate

Cationic tetracoordinate nickel(II) compounds containing a nickelcarbon σ bond with general formula [NiR(etp)]Y, (etp  bis(2-diphenylphosphinoethyl)phenylphosphine, PhP(CH₂CH₂PPh₂)₂; R = CH₃, CH₂C₆H₅, C₆H₅; Y = BPh₄, PF₆) were synthesized by reaction of the complexes [NiX(etp)]Y (X = halogen) with appropriate Grignard reagents.This type of organometallic complexes undergo insertion of sulfur dioxide into the NiC bond with formation of tetracoordinate O-sulfinate derivatives of nickel(II). The structure of [NiOS(O)CH₃(etp)]BPh₄ has been determined from three dimensional X-ray data collected by counter methods. The compound crystallized in the triclinic group P$\text{1}$ with cell dimensions a 16.726(4), a 15.350(4), c 11.632(3) Å, α 66.55(4), β 73.37(4), γ 74.75(4)°, Z = 2. The structure was refined by full matrix least-squares methods to a conventional R factor of 0.076. The coordination polyhedron has a distorted square planar geometry. The sulfinate group is linked to the metal through an oxygen atom.