Effects of monomer structures on the evolution of liquid–crystal texture and crystallization during thin-film polymerization

We investigated in situ the effects of monomer structures on the formation and evolution of liquid–crystal texture and crystallization during thin-film polymerization of a series of liquid–crystalline and crystalline polymers. The monomers used in this study consisted of 2,6-acetoxynaphthoic acid (ANA), p-acetoxybenzoic acid (ABA), acetoxy acetanilide (AAA), and isophthalic acid (IA). The polycondensation reactions were conducted on the heating stage of a polarizing microscope. The formation of liquid crystallinity was found to be strongly dependent on the straight-monomer structures of ANA and ABA and their percentages as well as the reaction temperature. For the ANA/AAA/IA and ABA/AAA/IA reaction systems, the critical straight-monomer content (ANA or ABA) existed to form the liquid–crystalline (LC) state. Interestingly, the critical content to form liquid crystallinity decreased with an increase in the reaction temperature. Above the critical content, the appearance of a defective LC phase and the annihilation of disclinations were observed during the polycondensation reactions. The number of defects decreased with increasing reaction time through annihilation. The annihilation rate increased whereas the defect density decreased with increasing straight-monomer content. For the same molar ratio, the reaction system containing ANA had a faster annihilation rate than that containing ABA. Below the critical content, crystalline polymers were formed. Nucleation and crystal growth were observed during the reactions, and the rate of crystal growth decreased with increasing ANA or ABA content. For the systems having the same molar ratio of ANA or ABA, the ANA/AAA/IA system had a higher tendency to yield the LC phase than the ABA/AAA/IA system because ANA has a longer mesogenic unit. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3084–3096, 1999     

FTIR study of E7 liquid crystal orientations confined to cylindrical cavities of Anodisc membranes

The orientation of E7 liquid crystal (LC) confined within 200 nm diameter cylindrical cavities of Anodisc membranes was investigated by FTIR dichroism techniques. The cavity walls of the confining pores were chemically modified with different length aliphatic acids (C_nH_2n+1COOH, n=5, 6, 7, 9) at 2 and 4% concentrations. From the FTIR spectra of the aliphatic acid-treated alumina Anodsic membranes, we found salt formation between the -COOH group of the aliphatic acids and the Anodisc membranes. From the FTIR spectra of LC-filled Anodisc membranes, we found an abrupt alignment direction change, from parallel to perpendicular, of the LC molecules along the long axis of the cavities between n=6 and n=7 for the 2% concentration of aliphatic acid. However for the 4% concentration of aliphatic acid the parallel to perpendicular alignment direction of LC molecules changed between n=5 and n=6. The same trend was previously observed for ²H NMR measurements by other researchers.     

Mesophase behaviour in fluorocarbon-hydrocarbon polyesters

A series of liquid crystalline main chain polyesters has been synthesized in which mesogenic, linear perfluoroalkyl groups are linked to aliphatic hydrocarbon chains. The liquid crystalline phase appears to be smectic B from X-ray diffraction data. Interesting differences in the mesophase transition temperatures and enthalpies are observed along the series, as the hydrocarbon and perfluoroalkyl contents are changed. These are discussed in relation to the length of the segments. One polymer was also synthesized from biphenyl-4,4'-dicarboxyic acid for comparison with the polyesters prepared using aliphatic dicarboxylic acids.     

Configuration effects of ortho,meta, and para linkages on liquid crystallinity during thin‐film polymerization of poly(ester‐amide)s

By in situ thin‐film polymerization conducted on a heating stage of a polarizing microscope, we have investigated the effects of monomer structures on the formation of liquid crystallinity. Three polymerization systems studied are 2,6‐acetoxynaphthoic acid (ANA)/acetoxy acetanilide (AAA)/phthalic acid (PA), ANA/AAA/isophthalic acid (IA) and ANA/AAA/terephthalic acid (TA). In the three systems, PA, IA, and TA may create an ortho, a meta, and a para linkage, respectively. The formation of liquid crystallinity was found strongly dependent on the straightness and configuration of monomeric units. For ANA/AAA/PA and ANA/AAA/IA systems, there exists the critical ANA content to yield the liquid crystalline phase. Below this critical content, either amorphous phase forms or crystallization occurs during polymerization. Experimental data also indicate that defect density in the polymerization product reduces with increasing ANA content. Surprisingly, for the first time, we have observed that the ANA/AAA/PA system has a higher tendency to yield liquid crystallinity than the ANA/AAA/IA system. For the ANA/AAA/TA system, the polycondensation reaction is incomplete if the TA content is too high because of the low reactivity and the high melting point of TA. Polymerization of the ANA/AAA/TA system does not yield totally random copolymers because the liquid crystal phase appears before all TA crystals disappear during the polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2221–2231, 2000     

Synthesis and variable-temperature FTIR study of five chiral liquid crystals induced by intermolecular hydrogen bonding

Five new chiral liquid crystal systems induced by intermolecular hydrogen bonding between 4-[(s)-2-chloro-3-methyl]butyroyloxy-4'-stilbazole (MBSB, proton acceptor) and 4-alkoxybenzoic acids (nBA, proton donors) were prepared. Their liquid crystalline properties were investigated by DSC and polarized optical microscopy. Chiral nematic and chiral smectic phases were observed, and the thermal stability of one complex was studied through temperature dependent infrared spectroscopy.     

Mixed-valent diruthenium (II,III) aliphatic carboxylates: columnar mesophases in dodecylsulfate and octylsulfonate derivatives

Two series of polymeric mixed-valent diruthenium (II,III) aliphatic carboxylates of formula Ru₂[O₂C(CH₂)_n-2CH₃]₄X (where X=dodecylsulfate (DOS) anion and n=8, 9, 16 and 18, or X=octylsulfonate (OS) anion and n=8, 10, 12, 14 and 18) were synthesized and characterized. Their liquid crystalline properties and crystalline (Cr) structures were analysed; the Cr phases are lamellar in all cases. For long chain DOS derivatives (n=16 and 18) hexagonal and rectangular columnar mesophases (Col_h and Col_r) with melting temperatures close to 140°C were observed. For long chain OS derivatives (n≥10) a Col_h mesophase was observed, with melting temperatures between 140 and 190°C.     

Liquid crystals comprising hydrogen-bonded organic acids I. Mixtures of non-mesogenic acids

Stable nematic phases are reported for binary mixtures of p-alkylbenzoic acids (nBA; where n = 1,2,3 denotes methyl, ethyl and propyl), p-alkoxybenzoic acids (nOBA, n = 1,2), and p-fluorobenzoic acid, which separately do not exhibit liquid crystalline phases. The mesophase stability increases in equimolar mixtures of acids having incomensurate lengths; the larger the difference in the tail substituents in the mixed organic acids, the broader the nematic phase. The trends in excess nematic range exhibited by the H-bonded supramesogens in binary mixtures parallels the behaviour of covalent mesogens. This is indicative of an influence of heterodimers comprising H-bonded pairs of the two different acids in equimolar mixtures of the non-mesogenic acids. It would appear that dimerized organic acids constitute a viable molecular-structural 'bread-board' for rapid screening for potential mesogen constituents.     

Induced G phase through intermolecular hydrogen bonding: X. Crystallization kinetics study on two structural isomers

A comparative systematic crystallization kinetics study has been carried out on two distinct novel liquid crystalline isomers, DBA : R :DBA and DBA : H :DBA (where DBA = p-n-decyloxybenzoic acid, R =resorcinol and H =hydroquinone) using differential scanning calorimetry. The kinetics experiment is performed from the crystal G phase (kinetophase), which is a common induced phase in both compounds. The molecular mechanism and dimensionality of crystal growth are studied from the Avrami exponent n while the characteristic crystallization time (t*) at each crystallization temperature is deduced from the individual plots of log t vs. ΔH.     

Induced crystal G phase through intermolecular hydrogen bonding VII. Influence of non-covalent interactions on mesomorphism and crystallization kinetics

A series of intermolecular hydrogen bonding complexes, 2,2'-bipyridine: p- n-alkoxybenzoic acids (BP : nABA) was isolated from liquid crystalline p-n-alkoxybenzoic acids (nABA) (where n represents alkoxy carbon numbers, 3 to 10 and 12) and a non-mesogen, 2,2'-bipyridine (BP). The thermal and phase behaviour of these complexes was studied by thermal microscopy and differential scanning calorimetry (DSC). These studies revealed the induction of tilted smectic F and crystal G phases. The structural elucidation pertaining to the formation of intermolecular hydrogen bonding was carried out by a detailed IR spectral investigation. Comparative crystallization kinectic studies using DSC, performed on two representative compounds, showed different forms of the crystallization process. The magnitudes of the Avrami exponent n suggests two different mechanisms operate for individual members leading to sporadic three-dimensional growth. Nevertheless, an overall unique mechanism is predicted to operate at each crystallization temperature investigated, while the Avrami constant b shows a temperature dependence suggesting a strong influence of alkoxy terminal groups on the rates of nucleation.     

Investigation of the Structures of the Crystalline and Columnar Phases of Linear Chain Copper(II) Alkanoates

Binuclear copper(11) complexes of fatty acids crystallize at room temperature in a lamellar lattice that has been characterized by X-ray diffraction. A transition to a thermotropic columnar mesophase is observed at about 110-120°C for each compound of the series n = 12 to n = 22, n being even and equal to the number of carbon atoms in the corresponding fatty acid. This columnar mesophase has been investigated by polarizing optical microscopy, differential scanning calorimetry and X-ray diffraction. Columns of polar copper carboxylate groups are surrounded by disordered aliphatic chains, and form a two-dimensional hexagonal lattice. The repeating unit in a column is a binuclear dicopper tetracarboxylate complex.     

Synthesis and characterization of two isomeric liquid crystal series with reactive double bonds

Two series of potentially cross-linkable liquid crystal materials derived from p-phenylenebisacrylic (series I, n(P.FB.P), n = 2-10) and p-hydroxycinnamic acid (series II, n(HC.T.HC), n = 2-10) have been synthesized and their thermal and mesomorphic properties studied. All these compounds show enantiotropic mesomorphism over a wide range of temperatures. Compounds with short terminal chains are nematic and when the terminal chain length is increased they show smectic polymorphism-smectic A and C. Most of the compounds are thermally stable over their mesophase ranges.     

Synthesis and mesomorphic properties of new liquid crystalline stilbene derivatives containing vinyloxyalkoxy chains

New liquid crystalline stilbene derivatives containing vinyloxyalkoxy chains 1 (n=5, 7, 9, 11) have been synthesised. Their mesomorphic properties have been studied by polarising optical microscopy and differential scanning calorimetry. It is interesting to note that even their alcohol precursors showed liquid crystalline behaviour. The effect of terminal alkoxy chain length and UV irradiation on the mesomorphic behaviour is discussed.     

Ion-exclusion chromatography of aliphatic car☐ylic acids on a cation-exchange resin by elution with polyvinyl alcohol

Ion-exclusion chromatography of aliphatic car☐ylic acids of different acidity (pK_a) and hydrophobicity was investigated on a polystyrene-divinylbenzene (PS-DVB) based strongly acidic cation-exchange resin in the H⁺ form and conductivity detection by elution with polyvinyl alcohol (PVA). When water was used as an eluent, the resolution of the car☐ylic acids was very low and the peak accompanied a fronting depending on their hydrophobicities. Therefore, to improve the peak shape and the peak resolution, aqueous eluents containing PVAs (degrees of polymerization, n=500, 1500and2000) with many OH groups were tested for the ion-exclusion chromatographic separation of the car☐ylic acids. When aqueous eluents containing PVA were used, the fronting was decreased dramatically by the effect of increased hydrophilicity of the PS-DVB cation-exchange resin surface due to adsorption of OH group in PVA. The high resolution ion-exclusion chromatographic separation without the fronting and highly sensitive conductimetric detection of the car☐ylic acids was accomplished successfully by elution with a 0.2% PVA (n=1500)-10% methanol-water.     

Synthesis and mesogenic properties of a novel family of oligothiophene derivatives

With the aim of developing new oligothiophene-based liquid crystals involving hydrogen bonding, new terthiophene derivatives containing an alkylamide group, N,N'-distearyl-2,2' : 5',2"-terthiophene-5,5"-dicarboxamide (DNC₁₈3T) and N,N'-dialkyl-5,5"-dibromo-2,2' : 5',2"-terthiophene-4,4"-dicarboxamides (DNC_nDBr3T, n = 5, 8, 16, 18), were designed and synthesized, and their thermal behaviour examined. While DNC₁₈3T did not exhibit liquid crystallinity, DNC_nDBr3T compounds with n = 8, 16, 18 were found to form smectic A phases. In addition to liquid crystal behaviour, crystal polymorphism was also observed for DNC₁₆DBr3T. It is shown that both the position of the amido group and the alkyl chain length greatly affect liquid crystal phase formation. The absence of liquid crystallinity in the corresponding ester derivatives suggests that intermolecular hydrogen bonding also plays a role in the formation of liquid crystal phases in the DNC_nDBr3T system.     

Synthesis and properties of new three-ring phenylacetylene liquid crystals containing the cyclohexyl unit

Two series of new three-ring phenylacetylene liquid crystals were synthesized and their physical properties were evaluated. These liquid crystal materials show only a nematic phase, high clearing points and good solubilities. The compounds containing two cyclohexyl rings exhibit moderate birefringence (Δn) values of around 0.14, while those containing one cyclohexyl ring show a broad nematic phase range and high Δn of around 0.33.     

Synthesis and mesomorphic properties of 6-n-decyloxy-2-[4'-N-alkoxyphenylimino)methyl]quinolines (IV)

The synthesis and mesomorphic properties of a new series of liquid crystals derived from quinoline with an imine central bond is described. All compounds exhibit mesophase ranges greater than 50°C. The lower homologues (n = 4-6) show trimorphism S_c-S_a-N (for n = 4, the S_c phase is monotropic). The higher homologues (n = 7-10) show nematic and smectic C phases. Compared to the styrylquinoline analogues the imine bond gives rise to similar liquid crystal phase ranges but lower melting points.     

液晶嵌段共聚物PET/60PHB-b-PC的合成及结构与性能

采用ＰＥＴ齐聚物的原位乙酰化法通过加入少量乙二醇（ＥＧ）合成了端羟基液晶聚合物ＰＥＴ／６０ＰＨＢ，并将其作为大单体，与双酚Ａ及碳酸二苯酯通过熔融酯交换法，进一步制得了液晶嵌段共聚物ＰＥＴ／６０ＰＨＢ ｂ ＰＣ．研究了合成规律，并借助粘度测定、ＤＳＣ、偏光显微镜、Ｘ 光衍射和红外光谱分析等手段对合成的液晶嵌段共聚物进行了表征．研究表明，当ＰＥＴ齐聚物的ηｉｎｈ＝００５～００７ｄＬ／ｇ，Ａｃ２Ｏ／ＰＨＢ（ｍｏｌ／ｍｏｌ）＝１３，ＥＧ／ＰＥＴ（ｍｏｌ／ｍｏｌ）＝００６时能获得颜色、液晶性、溶解性均很好的端羟基液晶聚合物ＰＥＴ／６０ＰＨＢ，以此液晶聚合物为原料，采用合适的配方与工艺，能获得粘度较高、液晶性较好，并且熔体流动性很好的液晶嵌段共聚物ＰＥＴ／６０ＰＨＢ ｂ ＰＣ．通过偏光显微镜与Ｘ 光衍射观察，证明此嵌段共聚物呈现向列型液晶织构，但其液晶态织构与纯ＰＥＴ／６０ＰＨＢ、ＰＥＴ／６０ＰＨＢ和ＰＣ的混合物明显不同．此外，还初步建立了用红外的分析手段鉴定液晶聚合物ＰＥＴ／６０ＰＨＢ端基的方法．     

Crystal and molecular structures of four model compounds for liquid crystal dimers with a methylene spacer of various lengths

The crystal and molecular structures of four model compounds for liquid crystal dimers namely, 4,4-[octyl]bis-acetophenone (B(AcP)8), 4,4-[heptyl]bis-acetophenone (B(AcP)7), 4,4-[hexyl]bis-acetophenone (B(AcP)6), and 1,1-(1,6-hexyldion)bis-benzene (DP6D), have been determined in order to gain an insight into observed differences in the textures of liquid crystalline phases of compounds with odd and even methylene spacers. All four compounds exhibit extended conformations with an all-trans conformation of the methylene chain but a twist between phenyl rings of about 125°, except DP6D for which the benzene groups lie in plane with the methylene chain. Half a molecule is necessary to represent the asymmetric unit of compounds with even numbers n of methylene groups in the spacer and belong to centrosymmetric space groups. The model compound with an odd value of n is non-centrosymmetric and shows another type of packing arrangement which may cause different textures and behaviour for dimesogenic compounds in the liquid crystalline state.     

Odd-even effect in miscibility of main-chain liquid crystal polymers with low molar mass nematogens

Qualitative phase diagrams were constructed using the contact method for binary mixtures of several chemically-distinct low molar mass nematogens (LMMN) with a main chain liquid crystal polymer (TPB-x) which has a mesogenic group, 1-(4-hydroxy-4'-biphenyl)-2-(4-hydroxy phenyl) butane, separated by flexible alkyl spacers of variable length, x. Several interesting effects were observed. TPB-x was found to exhibit an odd-even variation in miscibility in the nematic state (2n + 1 = miscible, 2n=immiscible) with 4'-pentyl-4-cyanobiphenyl (5CB), but not with 4'-pentyloxy-4-cyanobiphenyl (5OCB) in which most polymers were completely miscible. On prolonged isothermal annealing in the biphasic region in 5CB, TPB-2n exhibited spherulitic crystallization of the liquid crystal polymer. These observations are shown to be qualitatively consistent with a modification of the Flory-Huggins theory by Brochard et al.     

缩聚反应合成侧链液晶聚合物

侧链液晶聚合物的合成方法,可归纳为3类:一是烯基的单体,如甲基丙烯酸酯,或丙烯酸酯,氯代丙烯酸酯等,经自由基聚合反应,阴离子聚合反应及甲基丙烯酸酯的基团转移聚合反应,得到侧链液晶聚合物;二是变性反应,如聚硅氧烷与丙烯酸酯介