永磁轨道上方高温超导块材各向异性对悬浮力弛豫特性的影响

采用顶部熔融织构生长法制备的高温超导块材YBCO通常有5个生长区域．通过捕获磁通实验研究,人们发现高温超导块材内部生长区域及边界的捕获磁通能力不同,存在明显的各向异性．面向高温超导磁悬浮应用,本文比较研究了3块不同的高温超导块材YBCO组合在永磁轨道上方悬浮力弛豫特性．实验结果表明,无论场冷还是零场冷情况,块材籽晶生长...     

NdFeB永磁轨道上方YBaCuO块材的悬浮稳定性与场冷位置间关系

如何获得稳定悬浮是高温超导磁悬浮系统的一个重大问题.高温超导体在外磁场中所受的悬浮力和导向力是两个衡量系统悬浮稳定性的重要参数.本文实验研究了场冷情况下NdFeB永磁轨道上方YBaCuO块材在竖直运动和水平运动时所受悬浮力和导向力的情况,并且根据Bean模型开发了数值计算程序用于悬浮力和导向力的计算分析.不同竖直场冷高度下计算值和实验值获得了较好的一致性.实验结果和计算结果都显示出永磁轨道场中高温超导体所受的两个力与其场冷历史有着密切的关系,也就是说超导体的悬浮稳定性受场冷历史影响程度较大.不同的竖直场冷高度,其最大悬浮力的变化趋势和最大导向力的变化趋势相反.较小的水平场冷位置导致了较大的导向力和较大的磁滞.根据上述结果,为了获得较优的悬浮稳定性,本文推荐了可行的场冷高度范围和有效的高温超导体组合方式.     

The attenuation of the levitation force of HTS bulk exposed to AC magnetic field on the above NdFeB guideway

In the present High Temperature Superconducting (HTS) maglev vehicle system, the air gaps between the adjacent permanent magnets make the magnetic fields above the NdFeB guideway non-uniform. So it is required to study the characteristics of levitation force of the HTS bulk affected by the non-uniform applied magnetic fields along the moving direction. In this paper, we have studied the characteristics of the levitation force relaxation by an experiment in which AC magnetic field generated by an electromagnet is used to simulate the time-varying magnetic field caused by the inhomogeneity of the NdFeB guideway. From the experiment results, it is found that the levitation force is attenuated with the application of the AC field, and the attenuation is increased with the amplitude of the AC field, but the attenuation is almost independent of the frequency the AC magnetic field.     

垂向磁场变化量对高温超导块材悬浮力特性的影响

高温超导体因其无源自稳定的特性,受到许多学者的重视,具有广阔的应用前景.目前针对高温超导块材悬浮性能的研究主要集中于由永磁体产生的低磁场环境.本文基于超导磁体平台提供的强磁场环境,通过改变高温超导块材不同的场冷高度,实验研究了高温超导块材悬浮力与垂向磁场变化量的关系.研究结果表明随着垂向磁场变化量的增加,高温超导块材的悬浮力增长趋缓,并最终出现悬浮力饱和的现象.本文还对比了YBCO和GdBCO两种不同材料超导块材的悬浮性能,结果发现GdBCO的悬浮力在强磁场环境中表现出更大的潜力.这为高温超导磁浮在强磁场中的应用奠定了基础,通过更加合理地调节磁场的分布,可以更好地发挥高温超导块材的悬浮性能潜力.     

高温超导磁悬浮深冷测试系统设计

介绍一种使用 G- M制冷机实现深冷环境的高温超导磁悬浮测试系统。高温超导体块材YBa Cu O被固定在制冷机冷头上 ,其温度通过温度控制器可以控制在 1 0 0 K到 40 K范围内。永久磁体 Nd Fe B固定在位于 YBa Cu O上方高温超导磁悬浮测试系统的垂直运动部件上 ,并在计算机控制下作垂直运动以改变它与 YBa Cu O之间的距离。同时 ,计算机采集数据得到 YBa Cu O与 Nd Fe B之间悬浮力与距离的关系。通过温度设定 ,可得到 YBa Cu O在不同温度下的悬浮性能。     

时变外磁场中高温超导块材导向力性能的数值模拟

基于Bean临界态模型,针对目前的高温超导磁悬浮车系统,提出了一种模拟计算方法,该方法可计算在时变外磁场中块材导向力的衰减变化情况。通过对时变外磁场中块材温度、俘获磁通以及导向力等参数变化情况的实验结果和计算结果的对比,证实了该模拟计算方法的有效性。该模拟计算方法可用于定性研究高温超导块材的导向力性能在时变外磁场作用下的变化情况,为高温超导磁悬浮车的研究和工程实践提供了较为重要的科学依据。     

Influence of maglev force relaxation on the forces of bulk HTSC subjected to different lateral displacements above the NdFeB guideway

This paper studied the influence of maglev force relaxation on the force (both levitation and guidance forces) of bulk high-temperature superconductor (HTSC) subjected to different lateral displacements above a NdFeB guideway. Firstly, the maglev forces relaxation property of bulk HTSC above the permanent-magnet guideway (PMG) was studied experimentally, then the levitation and guidance forces were measured by SCML-2 measurement system synchronously at different lateral displacements, some times later(after relaxation), the forces were measured again as the same way. Compared to the two measured results, it was found that the change of the levitation force was larger compared to the case without relaxation, while the change of the guidance force was smaller. In addition, the rate of change of levitation force and guidance force was different for different maximum lateral displacements. This work provided a scientific analysis for the practical application of the bulk HTS.     

多块YBaCuO高温超导体在永磁轨道上的悬浮力

】报道了多块 YBa Cu O高温超导体块材的不同组合方式在永磁轨道上的磁悬浮力的实验研究结果 ,实验研究证明不同的组合方式对其悬浮力的影响较大。作者分别研究了四块 YBa Cu O高温超导体块材以不同的组合方式在永磁轨道上的悬浮力 ,并进行了分析比较 ,为高温超导磁悬浮车的设计提供了初步的实验依据     

Levitation performance of the magnetized bulk high-Tc superconducting magnet with different trapped fields

To a high-T_c superconducting (HTS) maglev system which needs large levitation force density, the magnetized bulk high-T_c superconductor (HTSC) magnet is a good candidate because it can supply additional repulsive or attractive force above a permanent magnet guideway (PMG). Because the induced supercurrent within a magnetized bulk HTSC is the key parameter for the levitation performance, and it is sensitive to the magnetizing process and field, so the magnetized bulk HTSC magnets with different magnetizing processes had various levitation performances, not only the force magnitude, but also its force relaxation characteristics. Furthermore, the distribution and configuration of the induced supercurrent are also important factor to decide the levitation performance, especially the force relaxation characteristics. This article experimentally investigates the influences of different magnetizing processes and trapped fields on the levitation performance of a magnetized bulk HTSC magnet with smaller size than the magnetic inter-pole distance of PMG, and the obtained results are qualitatively analyzed by the Critical State Model. The test results and analyses of this article are useful for the suitable choice and optimal design of magnetized bulk HTSC magnets.     

Temperature dependence of levitation force and its relaxation in a HTS levitation system

Using a modified Gifford–McMahon refrigerator to cool the cylindrical bulk YBaCuO superconductor within the region of 100–10 K, and using an updated high-temperature superconductor (HTS) maglev measurement system, the levitation force and its time relaxation at different temperatures between a YBaCuO bulk superconductor and a permanent magnet (PM) have been measured under zero-field cooling. It is found that decrease the cooling temperature of HTS can decrease the hysteresis of magnetization and increase the maximum levitation force of each hysteresis loop. For the relaxation of levitation force, if the temperature is continually lowered to 10 K after the relaxation measurement at given cooling temperature is performed for 600 s, the levitation force will continue to decrease sharply with the lowering of temperature even though it will get stable if the temperature is not lowered. Our results shown in this work are a benefit to the understanding of levitation systems.     

NdFeB永磁体下YBaCuO块材在交流磁扰动中的悬浮力磁滞特性

研究了交流磁扰动对高温超导块材和永磁体之间悬浮力的影响。实验分析了在零场冷(ZFC)条件下,不同频率的交流磁场扰动下的悬浮力曲线;另外还研究了交流磁扰动在永磁体下降和上升过程中对悬浮力的影响,发现上升过程中悬浮力受交流磁场影响较大,而在下降过程中影响则较为不明显,同时随着交流磁场幅值的增大,悬浮力的滞回曲线逐渐加宽。说明交流磁场导致了超导块磁滞损耗的增加,对超导磁浮特性的研究具有理论意义。     

基于磁滞效应的YBCO块材磁刚度测试方法

处于外磁场中的高温超导块材具有自稳定性。这种特性使得高温超导块材在磁悬浮轴承、飞轮储能、磁悬浮列车等方面,具有潜在的应用价值。非理想高温超导体具有很强的磁通钉扎特性,表现出很强的磁滞性。处于悬浮状态的高稳超导体,其稳定特性与其悬浮刚度密不可分。文中首先描述了高温超导块材磁悬浮测试系统磁刚度测试原理。此刚度测试方法充分考虑了非理想高温超导块材磁滞效应对磁刚度的影响。基于这种测试方法,研究了YBCO块材在永磁轨道上方悬浮力刚度的特性。通过与传统刚度测试方法比较,这种方法更能反应高温超导磁悬浮车实际磁刚度特性。     

强钉扎高温超导体与永磁体系统的悬浮力数值模型

本文从数值模拟和实验两方面研究了熔融织构Y-Ba-Cu-O(YBCO)高温超导块材与永磁体组成的磁悬浮系统的悬浮特性.通过理论与实验结果的比较,在Hikihara-Moon超导磁悬浮动力学唯像模型的基础上,提出了强钉扎磁悬浮力模型,并进一步研究了熔融织构YBCO块材在不同条件下的悬浮特性,包括:场冷高度(FCH)和零场冷却(ZFC)的对磁浮力的影响,以及由不同运动速度导致的磁悬浮力的变化等.结果表明,强钉扎磁悬浮力模型适合于精确描述由熔融织构YBCO高温超导块材与永磁体所组成的磁悬浮系统的悬浮特性.     

高温超导磁悬浮列车视景仿真系统

文中介绍研究开发的高温超导磁悬浮车的视景仿真系统.首先研究了视景仿真的体系结构,接着用3DMAX构建了视景仿真的三维场景,然后根据高温超导磁悬浮车的运行特性建立仿真所用的simulin模型,最后用过Visual C++编制用户界面.演示结果表明,该系统能较好地展示了世界上首辆载人高温超导磁悬浮车及其在轨道上的运行情况和...     

预载条件下Y-Ba-Cu-O块材的悬浮力弛豫特性

文中以实验技术为手段,研究了不同工况下预载抑制悬浮力弛豫衰减的作用规律.实验以Halbach永磁轨道和三籽晶方形Y -Ba-Cu-O块材组成的系统为主要研究对象,通过改变块材的场冷方式、工作高度、预载高度等,研究这些因素对块材悬浮力弛豫的影响规律.选取30mm场冷高度、15mm工作高度,改变永磁轨道和块材,研究了轨道磁...     

过冷液氮温度下块材的悬浮特性及其仿真研究

随着温度的降低,超导块材表现出的超导特性也随之变化.本文结合现有实际应用的车载超导块材冷却方法,通过改变气压的方式营造过冷液氮温度条件,探究块材组合与Halbach轨道之间的悬浮特性.由于实验测量存在一定局限性,只能完成部分工况条件下的研究.为了更加系统全面的研究,本文对过冷状态下超导块材的悬浮特性进行仿真计算,通过与实验结果对比来确定仿真参数.结果显示,仿真计算与实验数据吻合度较高,为后期的研究工作提供了仿真工具.     

辅助永磁体厚度对单畴GdBCO超导体捕获磁场分布及其磁悬浮力的影响

研究了两种磁悬浮系统组态中圆台形辅助永磁体厚度对高温超导体捕获磁场和超导磁悬浮力的影响。结果表明,圆台形辅助永磁体的下表面和GdBCO超导体上表面同处在一个水平面上,磁化用圆台形辅助永磁体的厚度H从5 mm增加到45 mm时,超导体捕获磁场和磁悬浮力与圆台形辅助永磁体的厚度直接相关。（1）当圆台形辅助永磁体的北极垂直向上且用液氮冷却后移除辅助永磁体时,最大磁悬浮力从21.8 N增大到26.5 N,再减小到22.9 N;（2）当圆台形辅助永磁体的北极垂直向下且用液氮冷却后移除辅助永磁体时,最大磁悬浮力从20.5 N减小到11.9 N ,再增加到20.4 N;（3）两种磁悬浮系统组态中最大磁悬浮力不一致,与零场冷情况下的最大磁悬浮力14.6 N也不同。在超导磁悬浮应用系统设计中,只有科学选择辅助永磁体形状和尺寸,合理设计组合方式,才能获得较强的磁场强度,提高超导磁悬浮力特性,该结果对促进高温超导体的实际应用具有重要的指导作用。     

Analysis and experimental validation of an HTS linear synchronous propulsion prototype with HTS magnetic suspension

A high temperature superconducting (HTS) linear propulsion system composed of a single-sided HTS linear synchronous motor (HTSLSM) in its middle and HTS magnetic suspension sub-systems on both sides has been developed. The HTSLSM uses an HTS bulk magnet array on the moving secondary, and the field-trapped characteristics of the HTS bulk using different magnetized methods have been measured and compared to identify their magnetization capability. In order to generate a large levitation force for the system, three different types of permanent magnet guideways (PMGs) have been numerically analyzed and experimentally verified to obtain an optimal PMG. Based on comprehensive experimental prototype tests, the results show that the HTS linear propulsion system can run with stable magnetic suspension having a constant air-gap length, and the thrust characteristics versus the exciting current, working frequency and the air-gap length have also been obtained. This work forms the basis for developing a practical HTS linear propulsion system by using HTS bulks both for propulsion and suspension.     

Suppression of guidance force decay of HTS bulk exposed to AC magnetic field perturbation in a maglev vehicle system

Superconducting maglev vehicle was one of the most promising applications of HTS bulks. In such a system, the HTS bulks were always exposed to AC external magnetic field, which was generated by the inhomogeneous surface magnetic field of the NdFeB guideway. In our previous work, it was observed that the guidance force of the YBCO bulk over the NdFdB guideway used in the high-temperature superconducting maglev vehicle system was decayed by the application of the AC external magnetic field. In this paper, we adopted a method to suppress the decay by altering the field–cooled height of the bulk. From the experimental results, it was found that the decay rate of the guidance force was smaller at lower field–cooled height. So we could suppress the guidance force decay of HTS bulk exposed to AC external magnetic field perturbation in the maglev vehicle system by reducing the field–cooled height of the bulk. Furthermore, all the experimental results in this paper were explained based on Bean critical-state model.     

基于ANSYS的高温超导混合磁轴承悬浮力分析

基于商用电磁场有限元软件ANSYS以及Bean临界态模型,对由圆柱形高温超导块材、永磁体和超导线圈组成的新型高温超导混合磁轴承的电磁场分布及悬浮力进行了仿真分析,研究了超导线圈对高温超导混合磁轴承悬浮力的影响,同时还通过实验测试了悬浮力。结果表明:仿真与实验具有较好的一致性,使用软件仿真方便可行,其结果较为准确可靠,可为高温超导混合磁轴承的设计和优化提供理论依据。