Antibacterial activity of transition metal complexes containing a tridentate NNO phenoxymethylpenicillin‐based Schiff base. An anti‐MRSA iron (II) complex

Transition metal complexes containing a phenoxymethylpenicillin‐derived Schiff base (HL) 3 obtained from the condensation of phenoxymethylpenicillin (PMP) 1 , with 1,2‐diaminobenzene 2 , were prepared. Spectroscopic and physicochemical techniques, namely, UV–Vis, FT‐IR, ¹H‐NMR, EPR, mass spectrometry, magnetic susceptibility, molar conductance, DFT studies, together with elemental and thermal analyses were used to characterize the synthesized complexes. Based on the characterization studies, the general formulae [ML (OAc)(H₂O)₂] where M = Fe 4 , Co 5 , Ni 6 , Cu 7 , and Zn 8 , were proposed for the complexes. The Schiff base ligand 3 behaved as a monoanionic tridentate NNO chelating agent. On the basis of magnetic and spectral data an octahedral geometry for all the complexes was suggested. Schiff base ligand 3 , and the metal complexes 4 – 8 were tested against G(+) or bactericidal activity by agar disc diffusion method and minimal inhibitory concentration (MIC). The results were compared with the activity of the standard drug PMP 1 . In vitro bacterial viability revealed that 3  had similar activity than 1 and exhibited modification in its bactericidal activity when formed metal complexes. It was found that the complexes 4 , 6 and 7 exhibited much better bactericidal activity than 1 against methicillin‐resistant Staphilococcus Aureus (MRSA) being complex 4 the most promising compound showing a MIC value of 0.042 μmol/ml.     

双水杨醛缩环己二胺类西佛碱及其配合物的合成、性质研究

合成了两种双水杨醛缩环已二胺类西佛碱N，N’-(二羟苯次甲基)环已二胺(1)和N，N’-二(3，5-二叔丁基-2-羟苯次甲基)环已二胺(2)，以及它们的金属锌配合物(3)和(4)，通过核磁共振、元素分析和红外光谱确定了四种物质的结构，研究了它们的紫外吸收光谱、荧光光谱，测定了(3)和(4)的荧光量子效率．(4)中四个叔丁基的存在使其荧光量子效率提高．此类双西佛碱金属配合物可以应用于有机电致发光材料中．     

Synthesis and photovoltaic properties of poly(p‐phenylenevinylene) derivatives containing oxadiazole

A novel poly(p‐phenylenevinylene) PPV‐based copolymer (3C‐OXD‐PPV) with electron‐deficient oxadiazole segments as the side chain has been successfully synthesized through the Gilch polymerization. The obtained copolymer is soluble in common organic solvents such as chloroform, tetrahydronfuran, and 1,1,2,2‐tetrachloroethane. The copolymer was characterized by ¹H NMR, elemental analysis and GPC. TGA measurement of the copolymer shows it has good thermal stability with decomposition temperature higher than 350 °C. The absorption, electrochemical properties of the 3C‐OXD‐PPV were investigated and also compared with the properties of MEH‐PPV. The HOMO and LUMO levels of 3C‐OXD‐PPV were estimated from the electrochemical cyclic voltammograms. Bulk‐heterojunction PVCs were fabricated by using 3C‐OXD‐PPV blended PCBM as an active layer. The PCE of the PVC is 1.60% under 100 mW cm^?2 AM 1.5 illumination, which indicates that 3C‐OXD‐PPV is a potential candidate for the application of polymer PVC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1003–1012, 2009     

Synthesis, structure, and magnetic properties of two 1-D helical coordination polymeric Cu(II) complexes

Two helical coordination polymeric copper(II) complexes bearing amino acid Schiff bases HL or HL′, which are condensed from 2-hydroxy-1-naphthaldehyde with 2-aminobenzoic acid or l-valine, respectively, have been prepared and characterised by X-ray crystallography. In [CuL]_n (1) the copper(II) atoms are bridged by syn-anti carboxylate groups giving infinite 1-D right-handed helical chains which are further connected by weak C-H?Cu interactions to build a 2-D network. While in [CuL′]_n (2) the carboxylate group acts as a rare monatomic bridge to connect the adjacent copper(II) atoms leading to the formation of a left-handed helical chain. Magnetic susceptibility measurements indicate that 1 exhibits weak ferromagnetic interactions whereas an antiferromagnetic coupling is established for 2. The magnetic behavior can be satisfactorily explained on the basis of the structural data.     

Synthesis and Structure of the Cerium Schiff‐Base Complexes [Ce(Salen′)2] and [(THF)2KCe(Salen′)2]

The synthesis of [Ce(Salen′)₂] ( 1 ) (H₂Salen′ = N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)ethylenediamine) was performed using two different approaches. CeCl₃ reacts with two equivalents of K₂Salen′ in THF under the formation of [(THF)₂KCe(Salen′)₂] ( 2 ). Complex 2 could be converted to the Ce^IV complex 1 via oxidation with p‐benzoquinone and air, respectively. The reversible reduction process was realized using elemental potassium in boiling THF. Furthermore, the reaction of the Ce^IV starting material [(^tBuO)₄Ce(THF)₂] with the “free” ligand H₂Salen′ in boiling toluene lead in the formation of 1 as well.     

Synthesis,characterization, crystal structures,and magnetic properties of two new dissymmetrical Schiff-base metal complexes

Two dissymmetrical Schiff-base metal complexes, [CuL1]₂ (1) (L1 = N-3-carboxylsalicylidene-N-5-bromosalicylaldehyde-1,3-diaminopentane) and [NiL2] · H₂O (2) (L2 = N-5-bromosalicylaldehyde-1,3-diaminopentane), have been synthesized and characterized by IR, elemental analyses, magnetic studies, and the crystal structures. The crystal structure of 1 contains one binuclear molecule in which each central Cu has N₂O₃ coordination. The magnetism of 1 has been determined in the temperature range of 5–300 K. Results indicate that interaction between the two Cu ions is weak antiferromagnetic. The crystal structure of 2 shows mononuclear structure with similar structural features. Through intermolecular hydrogen-bonding interactions, 2 gives an infinite chain structure.     

Preparation and catalysis of chloromethylated polystyrene‐supported macrocyclic Schiff base metal complexes for the oxidation of cumene

Chloromethylated polystyrene‐supported macrocyclic Schiff base metal complexes (PS‐L‐M, M = Cu²⁺, Co²⁺, Ni²⁺, and Mn²⁺) were synthesized and characterized by the methods of IR, ICP, and small area X‐ray photoelectron spectroscopy (XPS). The oxidation of cumene by molecular oxygen in the absence of solvent with the synthesized complexes employed as catalyst was carried out. In comparison with their catalytic activities, PS‐L‐Cu is a more effective catalyst for the oxidation of cumene. The main products are 2‐phenyl‐2‐propanol (PP) and cumene hydroperoxide, which were measured by GC/MS. The influences of reaction temperature, the amount of catalyst, as well as the reaction time on the oxidation of cumene were investigated. Copyright © 2008 John Wiley & Sons, Ltd.     

Four‐, five‐ and six‐coordinated transition metal complexes based on naphthalimide Schiff base ligands: Synthesis,crystal structure and properties

Two bidentate Schiff base ligands (HL¹ = N‐n‐butyl‐4‐[(E)‐2‐(((2‐aminoethyl)imino)methyl)phenol]‐1,8‐naphthalimide; and HL² = N‐n‐butyl‐4‐[(E)‐2‐(((2‐aminoethyl)imino)methyl)‐6‐methoxyphenol]‐1,8‐naphthalimide) with their metal complexes [Cu(L¹)₂] ( 1 ), [Zn(L¹)₂(Py)]₂?H₂O ( 2 ) and [Ni(L²)₂(DMF)₂] ( 3 ) have been synthesized and characterized. Single‐crystal X‐ray structure analysis reveals that complex 1 has a four‐coordinated square geometry, while complex 2 is a five‐coordinated square pyramidal structure and complex 3 is a distorted six‐coordinated octahedral structure. Cyclic voltammograms of 1 indicate an irreversible Cu²⁺/Cu⁺ couple. In vitro antioxidant activity assay demonstrates that the ligands and the two complexes 1 and 3 display high scavenging activity against hydroxyl (HO^?) and superoxide (O₂^??) radicals. Moreover, the fluorescence properties of the ligands and complexes 1 – 3 were studied in the solid state. Metal‐mediated enhancement is observed in 2 , whereas metal‐mediated fluorescence quenching occurs with 1 and 3 .     

Schiff base substitute polyphenol and its metal complexes derived from o‐vanillin with 2,3‐diaminopyridine: synthesis,characterization, thermal,and conductivity properties

Poly‐2,3‐bis[(2‐hydroxy‐3‐methoxyphenyl)methylene]diamino pyridine (PHMPMDAP) that a new Schiff base polymer has been synthesized and characterized by spectroscopy, elemental, and thermal analyses techniques. This azomethine polymer was found to form complexes readily with Cu(II), Zn(II), Co(II), Pb(II), and Fe(II). From IR and UV‐Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the polymer to be more stable than the monomer. The structure of the polymer obtained was confirmed by FT‐IR, UV‐Vis, ¹³C‐NMR, and ¹H‐NMR. Characterization was undertaken by TGA, size exclusion chromatography (SEC), and solubility tests. Also, electrical conductivities of PHMPMDAP and polymer–metal complexes are measured by four probe technique. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis and characterization of tetra-armed-thiosemicarbazone and its salen/salophen capped transition metal complexes: Investigation of their thermal and magnetic properties

In this work, we aimed to synthesize and characterize a novel tetra-directional ligand, (2E,2′E)-2,2′-((((2-(1,3-bis(4-((E)-(2-carbamothioylhydrazono)methyl)phenoxy)propan-2-ylidene)propane-1,3-diyl)bis(oxy))bis(4,1-phenylene))bis(methanylylidene))bis(hydrazinecarbothioamide) (5), including thiosemicarbazone group and its novel tetra-directional-tetra-nuclear Schiff base complexes. For this purpose, we used 1,4-dibromo-2,3-bis(bromomethyl)but-2-ene (2) as starting material. 4,4′-((2-(1,3-Bis(4-formylphenoxy)propan-2-ylidene)propane-1,3-diyl) bis(oxy))dibenzaldehyde (3) was synthesized by the reaction of an equivalent 1,4-dibromo-2,3-bis(bromomethyl)but-2-ene (2) and 4 equivalents of 4-hydroxybenzaldehyde. Then, compound 5 was synthesized in high yield (86%) by a condensation reaction of compound 3 with thiosemicarbazide (4). Finally, four novel tetra-nuclear Cr(III) or Fe(III) complexes of compound 5 were synthesized. The synthesized compounds were characterized using elemental analyses, ¹H NMR, Fourier transform–infrared spectrometry, liquid chromatography–mass spectrometry (ESI⁺), and thermal analyses. The metal ratios of the prepared complexes were determined using an atomic absorption spectrophotometer. We also investigated their effects on the magnetic behaviors of [salen, salophen, Cr(III)/Fe(III)] capped complexes. The complexes were found to be low-spin distorted octahedral Fe(III) and distorted octahedral Cr(III), all bridged by thiosemicarbazone.     

Synthesis,characterization and biological studies of oxovanadium(IV) complexes with triazole‐derived Schiff bases

A series of triazole‐derived Schiff bases (L¹–L⁵) and their oxovanadium(IV) complexes have been synthesized. The chemical structures of Schiff bases were characterized by their analytical (CHN analysis) and spectral (IR, ¹H and ¹³C NMR and mass spectrometry) data, and oxovanadium(IV) complexes were elucidated by their physical (magnetic susceptibility and conductivity), analytical (CHN analysis), conductance measurements and electronic spectral data. The molar conductivity data indicate the oxovanadium(IV) complexes to be non‐electrolyte. The Schiff bases act as bidentate and coordinate with the oxovanadium(IV)‐forming stoichiometry of a complex as [M (L‐H)₂] where M = VO and L = L¹–L⁵ in a square‐pyramidal geometry. The agar well diffusion method was used for in vitro antibacterial screening against E. coli, S. flexenari, P. aeruginosa, S. typhi, S. aureus and B. subtilis and for antifungal activity against T. longifucus, C. albican, A. flavus, M. canis, F. solani and C. glaberata. The biological activity data show the oxovanadium(IV) complexes to be more antibacterial and antifungal than the parent Schiff bases against one or more bacterial and fungal strains. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of poly(1‐oxodimethylene) via oxidation of poly(vinyl alcohol) with a hydrogen peroxide/hydrobromic acid system and metal complexation behavior of poly(1‐oxodimethylene)

Poly(1‐oxodimethylene) was synthesized via oxidation of poly(vinyl alcohol) with a hydrogen peroxide/hydrobromic acid system. The content of the carbonyl groups in poly(1‐oxodimethylene) depended on the amount of water added, and lower amounts of water were suitable for efficient oxidation due to higher acidity of the reaction system. The highest content of carbonyl groups was estimated to be above 88% by the titration with hydrazine that reacted with the carbonyl groups in poly(1‐oxodimethylene). The obtained poly(1‐oxodimethylene) complexed with Cu and Ni ions under basic conditions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2598–2605     

The electromagnetic properties of blends of poly(p‐phenylene‐vinylene) derivatives

We report the studies on the frequency dependence of the complex permittivity, and on the electromagnetic interference (EMI) shielding of conductive blends. The blends were obtained from conjugated oligomers of (p‐phenylene‐1,3,5‐hexatrienylene) end‐capped by Schiff base units and dispersed in an insulating matrix of poly(vinyl chloride) (PVC) and doped with sulfuric acid, H₂SO₄. Permittivity measurements from 10 kHz to 10 GHz have pointed out that the electrical conductivity of composites were in a range 10⁻⁵–10⁺¹ S/cm. From these experimental data performed on 250–500 µm, the reflectivity coefficients [R(dB)] have been calculated for simulation of mm thick samples, they have values of −9 to −20 dB depending on the frequency and on the thickness of the composites. These permitivity data have also allowed us to develop modelization of the radioelectric properties of conductive blends, using McLachlan's General Effective Medium (GEM) Theory. The optimization of the GEM parameters suggests some informations about the shape of the particles as well as the micro/macrostructure of the composite materials. Copyright © 2000 John Wiley & Sons, Ltd.     

Poly(p‐phenylenediamine)‐coated magnetic particles: Preparation and electrochemical properties

Magnetic particles are of great interest in various biomedical applications, such as, sample preparation, in vitro biomedical diagnosis, and therapy. For biosensing applications, the used functional magnetic particles should answer numerous criteria such as; submicron size in order to avoid rapid sedimentation, high magnetic content for fast separations under applied magnetic field, and finally, good colloidal stability. Therefore, the aim of this work was to prepare submicron magnetic core and conducting polymer shell particles. The polymer shell was induced using p‐phenylenediamine as key monomer. The obtained core–shell particles were characterized in terms of particle size, size distribution, magnetization properties, Fourier transform infrared (FTIR) analysis, surface morphology, chemical composition, cyclic voltammetry, and impedance spectroscopy. The best experimental condition was found using 40 mg of povidone (PVP—stabilizing agent) and 0.16 mmol of p‐phenylenediamine. Using such initial composition, the core‐shell magnetic nanoparticles shown a narrowed size distribution around 290 nm and high magnetic content (above 50%). The obtained amino containing submicron highly magnetic particles were found to be a conducting material and superparamagnetic in nature. These promising conducting magnetic particles can be used for both transport and lab‐on‐a‐chip detection.     

Photoluminescent properties of poly(p‐phenylene vinylene thiophene‐co‐siloxane)

A new p‐phenylene–vinylene–thiophene‐based siloxane block copolymer has been synthesized. The copolymer consists of alternating rigid and flexible blocks. The rigid blocks are composed of phenylene–vinylene–thiophene‐based units, and the flexible blocks are derived from 1,3‐dialkyldisiloxane units. The former component acts as the chromophore, and allows fine tuning of band gap for blue‐light emission, while the latter imparts good solubility of the copolymer in organic solvents, and thus, should enhance processibility of the resulting copolymer. The thermal properties of the copolymer have been characterized by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The photoluminescence (PL) of the copolymer in solution and in cast film has been studied. The effects of concentration on the PL intensity of the new copolymer in polymer blends with poly(methyl methacrylate) (PMMA) and poly(vinyl carbazole) (PVK) have also been described. Efficient energy transfer from PVK to the new block copolymer in the blended film was observed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1450–1456, 2000     

Synthesis,magnetic, and optoelectronic properties of poly(triphenylamine‐alt‐phenylenevinylene)s

Conjugated polymers alternatively involving m‐phenylenevinylene or p‐phenylenevinylene and a triphenylamine moiety in the main chain were synthesized via a Wittig–Horner‐type polycondensation of 4‐diformyl‐4′,4″‐dimethyl‐triphenylamine or 4‐diformyl‐4′,4″‐dimethoxy‐triphenylamine with m‐xylene‐bis(diethylphosphonate) or p‐xylene‐bis(diethylphosphonate). A high glass‐transition temperature (ca. 120 °C) and thermal stability (5% weight loss at temperatures greater than 450 °C) were observed for all polymers. These polymers, especially poly(methyltriphenylamine‐alt‐p‐phenylenevinylene), fluoresced a strong green color under UV irradiation, with a quantum efficiency of 50% for their chloroform solutions. Cyclic voltammetry showed a relatively low ionization potential (5.18–5.44 eV) for the polymers. These results suggest that these polymers satisfied the requisites of polymer materials for a single‐layer light‐emitting diode. The aminium radical derived from the oxidation of poly(triphenylamine‐alt‐m‐phenylenevinylene) satisfied both non‐Kekulé‐type π conjugation and ferromagnetic connectivity of the unpaired electrons and displayed a multiplet ground state. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4119–4127, 2000     

Synthesis,Structures and DFT Studies of Imido‐bridged and (Bis)ligand‐coordinated Titanium Complexes

Syntheses and structures of five imido‐bridged dinuclear titanium complexes and two (bis)ligand‐coordinated mononuclear titanium complexes are reported. Addition of 1 or 2 equiv. of Schiff base ligand (((1H‐pyrrol‐2‐yl)methylene)amino)‐2,3‐dihydro‐1H‐inden‐2‐ol (H₂L) to Ti(NMe₂)₄ resulted in transamination with 4 equiv. of dimethylamides generating a (bis)ligand‐coordinated complex Ti(L)₂ ( 1 ). Treatment of Ti(NMe₂)₄ with 1 equiv. of ^tBuNH₂ followed by addition of 1 equiv. of H₂L afforded an imido‐bridged complex [Ti(L)(N^tBu)]₂ ( 2 ). 1:1:1:1 reaction of Ti(NMe₂)₄/RNH₂/H₂L/py(or phen) produced imido‐bridgedcomplexes [Ti(L)(NPh)(py)]₂ ( 3 ), [Ti(L)(4‐F‐PhN)(py)]₂·Tol ( 4 ·Tol), [Ti(L)(4‐Cl‐PhN)(py)]₂·Tol·THF ( 5 ·Tol·THF), [Ti(L)(4‐Br‐PhN)(py)]₂·Tol ( 6 ·Tol) and a (bis)ligand‐coordinated complex Ti(L)₂·phen ( 7 ) (py = pyridine, phen = 1,10‐phenanthroline). Attempts to prepare the monomeric titianium imido complexes were unsuccessful. DFT studies show that the assumed compound which contains Ti = N species is less stable than imido‐bridged Ti‐N(R)‐Ti complexes, providing the better understanding of the experimental results.     

Poly(N‐phenylmaleimide‐co‐acrylic acid)–copper(II) and poly(N‐phenylmaleimide‐co‐acrylic acid)–cobalt(II) complexes: Synthesis,characterization, and thermal behavior

The free‐radical copolymerization of N‐phenylmaleimide (N‐PhMI) with acrylic acid was studied in the range of 25–75 mol % in the feed. The interactions of these copolymers with Cu(II) and Co(II) ions were investigated as a function of the pH and copolymer composition by the use of the ultrafiltration technique. The maximum retention capacity of the copolymers for Co(II) and Cu(II) ions varied from 200 to 250 mg/g and from 210 to 300 mg/g, respectively. The copolymers and polymer–metal complexes of divalent transition‐metal ions were characterized by elemental analysis, Fourier transform infrared, ¹H NMR spectroscopy, and cyclic voltammetry. The thermal behavior was investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG). The TG and DSC measurements showed an increase in the glass‐transition temperature (T_g) and the thermal stability with an increase in the N‐PhMI concentration in the copolymers. T_g of poly(N‐PhMI‐co‐AA) with copolymer composition 46.5:53.5 mol % was found at 251 °C, and it decreased when the complexes of Co(II) and Cu(II) at pHs 3–7 were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4933–4941, 2005     

p‐Nitrophenyl Picolinate Cleavage by Unsymmetrical Bis‐Schiff Base Manganese(III) and Cobalt(II) Complexes with Aza‐Crown Ether or Morpholino Pendants

The unsymmetrical bis‐Schiff base manganese(III) and cobalt(II) complexes with either benzo‐10‐aza‐crown ether pendants (MnL¹Cl, MnL²Cl) or morpholino pendant (MnL³Cl, CoL³) have been employed as models for hydrolase by studying the kinetics of their hydrolysis reactions with p‐nitrophenyl picolinate (PNPP). A kinetic model of PNPP cleavage catalyzed by these complexes is proposed. The effects of complex structures and reaction temperature on the rate of PNPP hydrolysis have been examined. All four complexes exhibit high catalytic activity and the rate increases with pH under 25°C. The complexes of ligands containing a crown ether group exhibit higher catalytic activities than the non‐crown analogues. The catalytic activity of the complexes follows the order Mn(III)>Co(II) under the same ligands.     

Synthesis and properties of through‐space conjugated polymers based on cyano‐substituted poly(p‐arylenevinylene)s

New through‐space cyano‐substituted poly(p‐arylenevinylene)s containing a [2.2]paracyclophane unit were synthesized by the Knoevenagel reaction. Polymers 5 and 7 have cyano groups at α‐positions and β‐positions from the dialkoxyphenylene unit, respectively. Their optical and electrochemical behaviors were investigated in detail in comparison with their model compounds. Polymers 5 and 7 exhibited through‐space conjugation via the cyclophane units. Polymer 5 showed greenish blue emission (λ_max = 477 nm) in diluted solution with fluorescence quantum efficiency (?_F) of only 0.007, whereas polymer 7 emitted in the bluish green region (λ_max = 510 nm) with ?_F of 0.32. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5979–5988, 2009