Residual dipolar coupling measurements of transmembrane proteins using aligned low-q bicelles and high-resolution magic angle spinning NMR spectroscopy

Bicelles are a major medium form to produce weak alignment of soluble proteins for residual dipolar coupling (RDC) measurements. The obstacle to using the same type of bicelles for transmembrane proteins with solution-state NMR spectroscopy is the loss of signals due to the adhesion or penetration of the proteins into large bicelles, resulting in slow protein tumbling. In this study, weak alignment of the second and third transmembrane domains (TM23) of the human glycine receptor (GlyR) was achieved in low-q bicelles (q = DMPC/DHPC). Although protein-free bicelles with such low q would likely show isotropic properties, the insertion of TM23 induced weakly preferred orientations so that the RDC of the embedded protein can be measured. The extent of the alignment increased but the TM23 signal intensity decreased when q was varied from 0.19 to 0.60. A q of 0.50 was found to be an optimal compromise between alignment and the signal-to-noise ratio. In each pair of NMR experiments for RDC measurements, the same sample and pulse sequence were used, with one being performed at high-resolution magic-angle spinning to obtain pure J-couplings without RDC. A meaningful structure refinement in bicelles was possible by iteratively fitting the experimental RDCs to the back-calculated RDCs using the high-resolution NMR structure of GlyR TM23 in trifluoroethanol as the starting template. Combination of this method with the conventional high-resolution NMR in membrane mimicking mixtures of water and organic solvents offers an attractive way to derive structural information for membrane proteins in their native environment.     

Detergent-associated solution conformations of helical and beta-barrel membrane proteins

Membrane proteins present major challenges for structural biology. In particular, the production of suitable crystals for high-resolution structural determination continues to be a significant roadblock for developing an atomic-level understanding of these vital cellular systems. The use of detergents for extracting membrane proteins from the native membrane for either crystallization or reconstitution into model lipid membranes for further study is assumed to leave the protein with the proper fold with a belt of detergent encompassing the membrane-spanning segments of the structure. Small-angle X-ray scattering was used to probe the detergent-associated solution conformations of three membrane proteins, namely bacteriorhodopsin (BR), the Ste2p G-protein coupled receptor from Saccharomyces cerevisiae, and the Escherichia coli porin OmpF. The results demonstrate that, contrary to the traditional model of a detergent-associated membrane protein, the helical proteins BR and Ste2p are not in the expected, compact conformation and associated with detergent micelles, while the beta-barrel OmpF is indeed embedded in a disk-like micelle in a properly folded state. The comparison provided by the BR and Ste2p, both members of the 7TM family of helical membrane proteins, further suggests that the interhelical interactions between the transmembrane helices of the two proteins differ, such that BR, like other rhodopsins, can properly refold to crystallize, while Ste2p continues to prove resistant to crystallization from an initially detergent-associated state.     

Structural Studies of Self‐Assembled Subviral Particles: Combining Cell‐Free Expression with 110 kHz MAS NMR Spectroscopy

Viral membrane proteins are prime targets in combatting infection. Still, the determination of their structure remains a challenge, both with respect to sample preparation and the need for structural methods allowing for analysis in a native‐like lipid environment. Cell‐free protein synthesis and solid‐state NMR spectroscopy are promising approaches in this context, the former with respect to its great potential in the native expression of complex proteins, and the latter for the analysis of membrane proteins in lipids. Herein, we show that milligram amounts of the small envelope protein of the duck hepatitis B virus (DHBV) can be produced by cell‐free expression, and that the protein self‐assembles into subviral particles. Proton‐detected 2D NMR spectra recorded at a magic‐angle‐spinning frequency of 110 kHz on <500 μg protein show a number of isolated peaks with line widths comparable to those of model membrane proteins, paving the way for structural studies of this protein that is homologous to a potential drug target in HBV infection.     

Solvent and lipid accessibility prediction as a basis for model quality assessment in soluble and membrane proteins

On-going efforts to improve protein structure prediction stimulate the development of scoring functions and methods for model quality assessment (MQA) that can be used to rank and select the best protein models for further refinement. In this work, sequence-based prediction of relative solvent accessibility (RSA) is employed as a basis for a simple MQA method for soluble proteins, and subsequently extended to the much less explored case of (alpha-helical) membrane proteins. In analogy to soluble proteins, the level of exposure to the lipid of amino acid residues in transmembrane (TM) domains is captured in terms of the relative lipid accessibility (RLA), which is predicted from sequence using low-complexity Support Vector Regression models. On an independent set of 23 TM proteins, the new SVR-based predictor yields correlation coefficient (CC) of 0.56 between the predicted and observed RLA profiles, as opposed to CC of 0.13 for a baseline predictor that utilizes TMLIP2H empirical lipophilicity scale (with standard deviations of about 0.15). A simple MQA approach is then defined by ranking models of membrane proteins in terms of consistency between predicted and observed RLA profiles, as a measure of similarity to the native structure. The new method does not require a set of decoy models to optimize parameters, circumventing current limitations in this regard. Several different sets of models, including those generated by fragment based folding simulations, and decoys obtained by swapping TM helices to mimic errors in template based assignment, are used to assess the new approach. Predicted RLA profiles can be used to successfully discriminate near native models from non-native decoys in most cases, significantly improving the separation of correct and incorrectly folded models compared to a simple baseline approach that utilizes TMLIP2H. As suggested by the robust performance of a simple MQA method for soluble proteins that utilizes more accurate RSA predictions, further significant improvements are likely to be achieved. The steady growth in the number of resolved membrane protein structures is expected to yield enhanced RLA predictions, facilitating further efforts to improve de novo and template based prediction of membrane protein structure.     

Distance Measurement on an Endogenous Membrane Transporter in E. coli Cells and Native Membranes Using EPR Spectroscopy

Membrane proteins may be influenced by the environment, and they may be unstable in detergents or fail to crystallize. As a result, approaches to characterize structures in a native environment are highly desirable. Here, we report a novel general strategy for precise distance measurements on outer membrane proteins in whole Escherichia coli cells and isolated outer membranes. The cobalamin transporter BtuB was overexpressed and spin‐labeled in whole cells and outer membranes and interspin distances were measured to a spin‐labeled cobalamin using pulse EPR spectroscopy. A comparative analysis of the data reveals a similar interspin distance between whole cells, outer membranes, and synthetic vesicles. This approach provides an elegant way to study conformational changes or protein–protein/ligand interactions at surface‐exposed sites of membrane protein complexes in whole cells and native membranes, and provides a method to validate outer membrane protein structures in their native environment.     

In situ measurement of conformational changes in proteins at liquid interfaces by circular dichroism spectroscopy

A new circular dichroism (CD) spectroscopy technique for studying conformational changes in proteins in situ at the air-water interface is described. By using this technique, conformations of four proteins, viz., beta-casein, bovine serum albumin (BSA), lysozyme, and fibrinogen in the adsorbed state at the air-water interface have been studied. beta-Casein, which is predominantly in a disordered state in solution, assumes a beta-sheet conformation at the air-water interface. On the other hand, lysozyme and fibrinogen, which are alpha+beta-type proteins in solution, become beta-type proteins by completely transforming their alpha-helix structure into beta-sheets. Bovine serum albumin, which is an alpha-type protein in solution, loses its alpha-helix and becomes a disordered protein at the air-water interface. The results indicated that during unfolding and film formation at the interface, structural changes in proteins, regardless of their initial native state, follow the course of increasing beta-sheet and disordered structure and decreasing alpha-helix content. Although this seems to be the general trend, the exceptional case of BSA suggests, however, that this is not universal.     

Proton‐Detected Solid‐State NMR Spectroscopy of a Zinc Diffusion Facilitator Protein in Native Nanodiscs

The structure, dynamics, and function of membrane proteins are intimately linked to the properties of the membrane environment in which the proteins are embedded. For structural and biophysical characterization, membrane proteins generally need to be extracted from the membrane and reconstituted in a suitable membrane‐mimicking environment. Ensuring functional and structural integrity in these environments is often a major concern. The styrene/maleic acid co‐polymer has recently been shown to be able to extract lipid/membrane protein patches directly from native membranes to form nanosize discoidal proteolipid particles, also referred to as native nanodiscs. In this work, we show that high‐resolution solid‐state NMR spectra can be obtained from an integral membrane protein in native nanodiscs, as exemplified by the 2×34 kDa bacterial cation diffusion facilitator CzcD.     

Predicting three-dimensional structures of transmembrane domains of β-barrel membrane proteins

β-Barrel membrane proteins are found in the outer membrane of gram-negative bacteria, mitochondria, and chloroplasts. They are important for pore formation, membrane anchoring, and enzyme activity. These proteins are also often responsible for bacterial virulence. Due to difficulties in experimental structure determination, they are sparsely represented in the protein structure databank. We have developed a computational method for predicting structures of the transmembrane (TM) domains of β-barrel membrane proteins. Based on physical principles, our method can predict structures of the TM domain of β-barrel membrane proteins of novel topology, including those from eukaryotic mitochondria. Our method is based on a model of physical interactions, a discrete conformational state space, an empirical potential function, as well as a model to account for interstrand loop entropy. We are able to construct three-dimensional atomic structure of the TM domains from sequences for a set of 23 nonhomologous proteins (resolution 1.8-3.0 ?). The median rmsd of TM domains containing 75-222 residues between predicted and measured structures is 3.9 ? for main chain atoms. In addition, stability determinants and protein-protein interaction sites can be predicted. Such predictions on eukaryotic mitochondria outer membrane protein Tom40 and VDAC are confirmed by independent mutagenesis and chemical cross-linking studies. These results suggest that our model captures key components of the organization principles of β-barrel membrane protein assembly.     

Neurotoxin II bound to acetylcholine receptors in native membranes studied by dynamic nuclear polarization NMR

Methods enabling structural studies of membrane-integrated receptor systems without the necessity of purification provide an attractive perspective in membrane protein structural and molecular biology. This has become feasible in principle since the advent of dynamic nuclear polarization (DNP) magic-angle-spinning NMR spectroscopy, which delivers the required sensitivity. In this pilot study, we observed well-resolved solid-state NMR spectra of extensively (13)C-labeled neurotoxin II bound to the nicotinic acetylcholine receptor (nAChR) in native membranes. We show that TOTAPOL, a biradical required for DNP, is localized at membrane and protein surfaces. The concentration of active, membrane-attached biradical decreases with time, probably because of reactive components of the membrane preparation. An optimal distribution of active biradical has strong effects on the NMR data. The presence of inactive TOTAPOL in membrane-proximal situations but active biradical in the surrounding water/glycerol "glass" leads to well-resolved spectra, yet a considerable enhancement (ε = 12) is observed. The resulting spectra of a protein ligand bound to its receptor are paving the way for further DNP investigations of proteins embedded in native membrane patches.     

Construction of covalent membrane protein complexes and high-throughput selection of membrane mimics

The association of transmembrane (TM) helices underlies membrane protein structure and folding. Structural studies of TM complexes are limited by complex stability and the often time-consuming selection of suitable membrane mimics. Here, methodology for the efficient, preparative scale construction of covalent TM complexes and the concomitant high-throughput selection of membrane mimics is introduced. For the employed integrin αIIbβ3 model system, the methodology identified phospholipid bicelles, including their specific composition, as the best membrane mimic. The method facilitates structure determination by NMR spectroscopy as exemplified by the measurement of previously inaccessible residual dipolar couplings and (15)N relaxation parameters.     

Strategies to prepare and characterize native membrane proteins and protein membranes by AFM

Progress in characterizing native membrane proteins and protein membranes by atomic force microscopy (AFM) opens exciting possibilities. While the structure, oligomeric state and supramolecular assembly of membrane proteins are assessed directly by AFM, single-molecule force spectroscopy (SMFS) identifies interactions that stabilize the fold, and characterize the switching between functional states of membrane proteins. But what is next? How can we approach cell biological, pharmaceutical and medical questions associated with native cellular membranes? How can we probe the functional state of cell membranes and study the dynamic formation of compartments? Such questions have been addressed by immobilizing membranes on solid supports, which ensures the integrity of the native state of membrane proteins but does not necessarily provide a native-like environment. Direct attachment of membranes to solid supports involves non-specific interactions that may change the physical state of supported lipids and proteins possibly hindering the assembly of membrane proteins into native functional compartments. Thus, to observe the dynamic assembly and working of proteins in native membranes by AFM, supports are required that mimic the native environment of the cell membrane as closely as possible. This review reports on recent progress in characterizing native membrane proteins by AFM, and surveys conventional and new approaches of supporting surfaces, which will allow the function, dynamics, and assembly of membrane proteins to be studied by AFM in native cell membranes.     

Solid-state NMR on a large multidomain integral membrane protein: the outer membrane protein assembly factor BamA

Multidomain proteins constitute a large part of prokaryotic and eukaryotic proteomes and play fundamental roles in various physiological processes. However, their structural characterization is challenging because of their large size and intrinsic flexibility. We show here that motional-filtered high-resolution solid-state NMR (ssNMR) experiments allow for the observation and structural analysis of very large multidomain membrane proteins that are characterized by different motional time scales. This approach was used to probe the folding of the 790-residue membrane protein BamA, which is the core component of the Escherichia coli outer membrane protein assembly machinery. A combination of dipolar- and scalar-based two-dimensional ssNMR experiments applied to two uniformly (13)C,(15)N-labeled BamA variants revealed characteristic secondary structure elements and distinct dynamics within the BamA transmembrane protein segment and the periplasmic POTRA domains. This approach hence provides a general strategy for collecting atomic-scale structural information on multidomain (membrane) proteins in a native-like environment.     

Solid-State NMR of a Large Membrane Protein by Paramagnetic Relaxation Enhancement

Membrane proteins play an important role in many biological functions. Solid-state NMR spectroscopy is uniquely suited for studying structure and dynamics of membrane proteins in a membranous environment. The major challenge to obtain high quality solid-state NMR spectra of membrane proteins is sensitivity, due to limited quantities of labeled high-molecular-weight proteins. Here we demonstrate the incorporation of paramagnetic metal (Cu(2+)) ions, through either EDTA or a chelator lipid, into membrane protein samples for rapid data collection under fast magic-angle spinning (MAS) and low power (1)H decoupling. Spectral sensitivity of DsbB (20 kDa), an integral membrane protein, more than doubles in the same experimental time due to (1)H T(1) relaxation enhancement by Cu(2+) ions, with DsbB native fold and active site intact. This technique can be implemented to acquire multidimensional solid-state NMR spectra for chemical shift assignments and structure elucidation of large membrane proteins with small sample quantities.     

In‐Situ Spin Labeling of His‐Tagged Proteins: Distance Measurements under In‐Cell Conditions

New spin labeling strategies have immense potential in studying protein structure and dynamics under physiological conditions with electron paramagnetic resonance (EPR) spectroscopy. Here, a new spin‐labeled chemical recognition unit for switchable and concomitantly high affinity binding to His‐tagged proteins was synthesized. In combination with an orthogonal site‐directed spin label, this novel spin probe, Proxyl‐trisNTA (P‐trisNTA) allows the extraction of structural constraints within proteins and macromolecular complexes by EPR. By using the multisubunit maltose import system of E. coli: 1) the topology of the substrate‐binding protein, 2) its substrate‐dependent conformational change, and 3) the formation of the membrane multiprotein complex can be extracted. Notably, the same distance information was retrieved both in vitro and in situ allowing for site‐specific spin labeling in cell lysates under in‐cell conditions. This approach will open new avenues towards in‐cell EPR.     

Structure determination of a membrane protein with two trans-membrane helices in aligned phospholipid bicelles by solid-state NMR spectroscopy

The structure of the membrane protein MerFt was determined in magnetically aligned phospholipid bicelles by solid-state NMR spectroscopy. With two trans-membrane helices and a 10-residue inter-helical loop, this truncated construct of the mercury transport membrane protein MerF has sufficient structural complexity to demonstrate the feasibility of determining the structures of polytopic membrane proteins in their native phospholipid bilayer environment under physiological conditions. PISEMA, SAMMY, and other double-resonance experiments were applied to uniformly and selectively (15)N-labeled samples to resolve and assign the backbone amide resonances and to measure the associated (15)N chemical shift and (1)H-(15)N heteronuclear dipolar coupling frequencies as orientation constraints for structure calculations. (1)H/(13)C/(15)N triple-resonance experiments were applied to selectively (13)C'- and (15)N-labeled samples to complete the resonance assignments, especially for residues in the nonhelical regions of the protein. A single resonance is observed for each labeled site in one- and two-dimensional spectra. Therefore, each residue has a unique conformation, and all protein molecules in the sample have the same three-dimensional structure and are oriented identically in planar phospholipid bilayers. Combined with the absence of significant intensity near the isotropic resonance frequency, this demonstrates that the entire protein, including the loop and terminal regions, has a well-defined, stable structure in phospholipid bilayers.     

Structure and function of enzymes adsorbed onto single-walled carbon nanotubes

We have examined the structure and function of two enzymes, alpha-chymotrypsin (CT) and soybean peroxidase (SBP), adsorbed onto single-walled carbon nanotubes (SWNTs). SBP retained up to 30% of its native activity upon adsorption, while the adsorbed CT retained only 1% of its native activity. Analysis of the secondary structure of the proteins via FT-IR spectroscopy revealed that both enzymes undergo structural changes upon adsorption, with substantial secondary structural perturbation observed for CT. Consistent with these results, AFM images of the adsorbed enzymes indicated that SBP retains its native three-dimensional shape while CT appears to unfold on the SWNT surface. This study represents the first in depth investigation of protein structure and function on carbon nanotubes, which is critical in designing optimal carbon nanotube-protein conjugates.     

Conserved network properties of helical membrane protein structures and its implication for improving membrane protein homology modeling at the twilight zone

Homology modeling techniques remain an important tool for membrane protein studies and membrane protein-targeted drug development. Due to the paucity of available structure data, an imminent challenge in this field is to develop novel computational methods to help improve the quality of the homology models constructed using template proteins with low sequence identity. In this work, we attempted to address this challenge using the network approach developed in our group. First, a structure pair dataset of 27 high-resolution and low sequence identity (7–36%) comparative TM proteins was compiled by analyzing available X-ray structures of helical membrane proteins. Structure deviation between these pairs was subsequently confirmed by calculating their backbone RMSD and comparing their potential energy per residue. Next, this dataset was further studied using the network approach. Results of these analyses indicated that the network measure applied represents a conserved feature of TM domains of similar folds with various sequence identities. Further comparison of this salient feature between high-resolution template structures and their homology models at the twilight zone suggested a useful method to utilize this property for homology model refinement. These findings should be of help for improving the quality of homology models based on templates with low sequence identity, thus broadening the application of homology modeling techniques in TM protein studies.     

Folding, conformational changes, and dynamics of cytochromes C probed by NMR spectroscopy

NMR spectroscopy has become a vital tool for studies of protein conformational changes and dynamics. Oxidized Fe(III)cytochromes c are a particularly attractive target for NMR analysis because their paramagnetism (S = (1)/(2)) leads to high (1)H chemical shift dispersion, even for unfolded or otherwise disordered states. In addition, analysis of shifts induced by the hyperfine interaction reveals details of the structure of the heme and its ligands for native and nonnative protein conformational states. The use of NMR spectroscopy to investigate the folding and dynamics of paramagnetic cytochromes c is reviewed here. Studies of nonnative conformations formed by denaturation and by anomalous in vivo maturation (heme attachment) are facilitated by the paramagnetic, low-spin nature of native and nonnative forms of cytochromes c. Investigation of the dynamics of folded cytochromes c also are aided by their paramagnetism. As an example of this analysis, the expression in Escherichia coli of cytochrome c(552) from Nitrosomonas europaea is reported here, along with analysis of its unusual heme hyperfine shifts. The results are suggestive of heme axial methionine fluxion in N. europaea ferricytochrome c(552). The application of NMR spectroscopy to investigate paramagnetic cytochrome c folding and dynamics has advanced our understanding of the structure and dynamics of both native and nonnative states of heme proteins.     

Directed assembly of surface-supported bilayers with transmembrane helices

The lateral assembly of transmembrane (TM) helices gives rise to membrane proteins with complex folds, which play important roles in biochemical processes. Therefore, the assembly of surface-supported bilayers containing TM helices is the first step toward the development of functional biomembrane mimetics. Here we report novel directed assembly of surface-supported lipid bilayers with laterally mobile TM helices. The TM helices were incorporated into lipid monolayers at the air/water interface, and the monolayers were then transferred onto glass substrates using Langmuir-Blodgett (LB) deposition. Finally, bilayers were assembled using lipid vesicle fusion on top of the LB monolayers. The novelty is the incorporation of the peptides into the monolayer at the first step of bilayer assembly, which allows control over the peptide concentration and orientation. The transmembrane orientation of the peptides was confirmed using oriented circular dichroism (OCD), lateral mobility was assessed using fluorescence recovery after photobleaching (FRAP), and diffusion coefficients were determined using a novel boundary profile evolution (BPE) method. The described directed-assembly approach can be used to develop versatile bilayer platforms for studying membrane proteins interactions in native bilayer environments.     

Improved helix and kink characterization in membrane proteins allows evaluation of kink sequence predictors

Although the α-helical secondary structure of proteins is well-defined, the exact causes and structures of helical kinks are not. This is especially important for transmembrane (TM) helices of integral membrane proteins, many of which contain kinks providing functional diversity despite predominantly helical structure. We have developed a Monte Carlo method based algorithm, MC-HELAN, to determine helical axes alongside positions and angles of helical kinks. Analysis of all nonredundant high-resolution α-helical membrane protein structures (842 TM helices from 205 polypeptide chains) revealed kinks in 64% of TM helices, demonstrating that a significantly greater proportion of TM helices are kinked than those indicated by previous analyses. The residue proline is over-represented by a factor >5 if it is two or three residues C-terminal to a bend. Prolines also cause kinks with larger kink angles than other residues. However, only 33% of TM kinks are in proximity to a proline. Machine learning techniques were used to test for sequence-based predictors of kinks. Although kinks are somewhat predicted by sequence, kink formation appears to be driven predominantly by other factors. This study provides an improved view of the prevalence and architecture of kinks in helical membrane proteins and highlights the fundamental inaccuracy of the typical topological depiction of helical membrane proteins as series of ideal helices.