Electroactive layer-by-layer films of heme protein-coated polystyrene latex beads with poly(styrene sulfonate)

In this work, a novel two-step construction strategy for protein layer-by-layer assembly films was proposed. In the first step, positively charged hemoglobin (Hb) or myoglobin (Mb) at pH 5.0 was adsorbed on the negatively charged surface of 500 nm diameter-sized polystyrene (PS) latex beads, forming core-shell structured PS-protein particles. In the next step, the PS-protein particles were further assembled layer by layer with oppositely charged poly(styrene sulfonate)(PSS) on various solid surfaces under suitable conditions. Cyclic voltammetry (CV), quartz crystal microbalance (QCM), and UV-vis spectroscopy were used to monitor the growth of {(PS-protein)/PSS}(n) films. The stable {(PS-protein)/PSS}(n) films modified on pyrolytic graphite (PG) electrodes demonstrated good electroactivity in protein-free buffer, which was originated from protein heme Fe(III)/Fe(II) redox couples, and the electroactivity extended to six (PS-protein)/PSS bilayers. UV-vis spectroscopy showed that Hb and Mb in the films retained their near-native structure in the medium pH range. {(PS-protein)/PSS}(n) films catalyzed electrochemical reduction of oxygen, hydrogen peroxide, trichloroacetic acid (TCA) and nitrite with a significant lowering of overpotential, and displayed better catalytic activity than corresponding cast PS-protein films.     

Ultrathin transparent conductive films of polymer-modified multiwalled carbon nanotubes

Deposition of multiwalled carbon nanotubes modified by poly(2-vinylpyridine) (CNT-g-P2VP) from aqueous dispersions at low pH is an effective method to prepare homogeneous ultrathin films with a tunable CNTs density. A percolation threshold of 0.25 mug/cm2 and a critical exponent alpha = 1.24 have been found from dc conductivity measurements. The sheet resistance value agrees with the percolation theory for 2D films. According to AFM and electrical measurements, even when only 5% of the surface is covered by CNT-g-P2VPs, the sheet resistance is of the order of 1 MOmega/sq, which indicates that conductivity is imparted by a network of an ultralow density. When the film transmittance decreases down to approximately 70% at 550 nm, the occupied surface area is approximately 15% and sheet resistance falls down to approximately 90 kOmega/sq. These data show that undesired in-plane clustering does not occur upon the dispersion casting of the films and that high-quality networks of CNT-g-P2VPs are built up. The electrosteric stabilization of the CNT-g-P2VP dispersions in water at low pH is at the origin of this desired behavior. Although the multiwalled CNT films prepared in this work are less conductive and less transparent than the SWNTs films, they could find applications, e.g., in touch screens, reflective displays, EMI shielding, and static charge dissipation.     

Enzymatic degradation of multiwalled carbon nanotubes

Because of their unique properties, carbon nanotubes and, in particular, multiwalled carbon nanotubes (MWNTs) have been used for the development of advanced composite and catalyst materials. Despite their growing commercial applications and increased production, the potential environmental and toxicological impacts of MWNTs are not fully understood; however, many reports suggest that they may be toxic. Therefore, a need exists to develop protocols for effective and safe degradation of MWNTs. In this article, we investigated the effect of chemical functionalization of MWNTs on their enzymatic degradation with horseradish peroxidase (HRP) and hydrogen peroxide (H(2)O(2)). We investigated HRP/H(2)O(2) degradation of purified, oxidized, and nitrogen-doped MWNTs and proposed a layer-by-layer degradation mechanism of nanotubes facilitated by side wall defects. These results provide a better understanding of the interaction between HRP and carbon nanotubes and suggest an eco-friendly way of mitigating the environmental impact of nanotubes.     

Electro-oxidation of amino-functionalized multiwalled carbon nanotubes

We report the electrochemistry of amino-functionalized multiwalled carbon nanotubes (MWCNTs-NH₂) in the pH range from 0.3 to 6.4 using quantitative cyclic voltammetry (CV) and single entity electrochemistry measurements, making comparison with non-functionalized MWCNTs. CV showed the latter to both catalyze the solvent (water) decomposition and to undergo irreversible electro-oxidation forming oxygen containing surface functionality. The MWCNTs-NH₂ additionally undergo an irreversible oxidation to an extent which is dependent on the pH of the solution, reflecting the variable amount of deprotonated amino groups present as a function of pH. Nano-impact experiments conducted at the single particle level confirmed the oxidation of both types of MWCNTs, showing agreement with the CV. The pK_a of the amino groups in MWCNTs was determined via both electrochemical methods giving consistent values of ca. 2.5.

A new and generic approach to the study of the oxidation of different forms of CNTs is found by using quantitative single entity and ensemble electrochemistry measurements.     

Sonochemical oxidation of multiwalled carbon nanotubes

Functionalization of carbon nanotubes (CNTs) is important for enhancing deposition of metal nanoparticles in the fabrication of supported catalysts. A facile approach for oxidizing CNTs is presented using a sonochemical method to promote the density of surface functional groups. This was successfully employed in a previous study [J. Phys. Chem. B 2004, 108, 19255] to prepare highly dispersed, high-loading Pt nanoparticles on CNTs as fuel cell catalysts. X-ray photoelectron spectroscopy (XPS), transmission electron microscopy, cyclic voltammetry, and settling speeds were used to characterize the degree of surface functionalization and coverage. The sonochemical method effectively functionalized the CNTs. A mixture of -C-O-/-C=O and -COO- was observed along with evidence for weakly bound CO at longer treatment times. The integrated XPS C 1s core level peak area ratios of the oxidized-to-graphitic C oxidation states, as well as the atom % oxygen from the O 1s level, showed an increase in peak intensity (attributed to -CO(x)()) with increased sonication times from 1 to 8 h; the increase in C surface oxidation correlated well with the measured atom %. Most of the CNT surface oxidation occurred between 1 and 2 h. The sonochemically treated CNTs were also studied by cyclic voltammetry and settling experiments, and the results were consistent with the XPS observations.     

Tunable thermoresponsive water-dispersed multiwalled carbon nanotubes

Polymers containing poly(ethylene glycol) methacrylate and 2-(2-methoxyethoxy)ethyl methacrylate have been synthesized by Cu(0)-mediated radical polymerisation for use as thermoresponsive water-dispersants for carbon nanotubes.     

Preparation of transparent conductive multilayered films using active pentafluorophenyl ester modified multiwalled carbon nanotubes

A mutilayered film was prepared by layer-by-layer (LBL) assembly of active ester modified multiwalled carbon nanotubes (MWCNTs) and poly(allylamine hydrochloride) (PAH). For this purpose, carboxylic groups on the surface of the oxidized MWCNTs were converted to the acyl chlorides by their reaction with thionyl chloride. Subsequent reaction of the acyl chlorides with pentafluorophenol formed the active esters. These active ester modified MWCNTs (MWCNTs-COOC 6F 5) were air-stable and moisture resistant, but showed a high reactivity toward primary or secondary amines resulting in amide bonds. For the preparation of a multilayered film, the surface of a quartz slide was first activated and sacrificial double layers of PAH and poly(sodium 4-styrene sulfonate) (PSS) were deposited. Subsequently, LBL assembly of MWCNTs-COOC 6F 5 and PAH was then conducted on these double layers [(PAH/PSS) 2]. In the process of the assembly, a reaction occurred between the active ester on the surface of MWCNTs and the amine groups of polyallylamine yielding amide bonds, which resulted in a mechanically stable thin film. A free-standing film was obtained after dissolving the sacrificial layer [(PAH/PSS) 2] in a concentrated aqueous NaOH solution. The surface resistance of the multilayered film with 20 bilayers decreased to around 10 kOmega while remaining a reasonable transparency (70% at 500 nm).     

Synthetic gecko foot-hairs from multiwalled carbon nanotubes

We report a fabrication process for constructing polymer surfaces with multiwalled carbon nanotube hairs, with strong nanometer-level adhesion forces that are 200 times higher than those observed for gecko foot-hairs.     

Microwave-assisted covalent sidewall functionalization of multiwalled carbon nanotubes

Thermal cycloaddition of 1,3-dipolar azomethine ylides to the sidewalls of multiwalled carbon nanotubes (MWNTs) has been used to prepare MWNTs that contain 2-methylenethiol-4-(4-octadecyloxyphenyl) (4), N-octyl-2-(4-octadecyloxyphenyl) (5) or 2-(4-octadecyloxyphenyl)pyrrolidine (6) units. All these contain the 4-octadecyloxyphenyl substituent that acts as a solubilizing group. Microwave (MiW)-assisted heating was found to be highly efficient for soluble MWNTs, for which the amount of added groups after only 2 h of MiW heating at 200 degrees C, determined by using thermogravimetric analysis, was found to be in the same range as that obtained after 100-120 h of conventional heating of soluble and insoluble MWNTs. Solubility is a key feature for a successful MiW-heated reaction; MWNTs insoluble in the reaction medium yielded considerably less addends in the MiW-heated reactions than in the conventionally heated reaction. The location and even distribution of the pyrrolidine units over the outermost layer of the MWNTs was verified by transmission electron microscopy analysis of 4 that had been treated with gold nanoparticles and thoroughly washed to remove gold particles adsorbed on nonfunctionalized parts of the MWNTs.     

Optical and electrochemical properties of poly(o-toluidine) multiwalled carbon nanotubes composite Langmuir-Schaefer films

Conducting poly(o-toluidine) (POT) with multiwalled carbon nanotubes (MWNTs) nanocomposite (POT-MWNTs) was synthesized by oxidative polymerization. Chloroform solutions of the material were used for the optical characterizations by means of UV-visible spectroscopy and for the fabrication of Langmuir-Schaefer (LS) films. LS films were fabricated at the air-liquid interface by using 0.1 M HCl aqueous solution as the subphase to study the electrochemical properties of the nanocomposite by means of cyclic voltammetry and photoelectrochemical techniques. The optical characterizations gave proof that the presence of MWNTs inside the polymeric matrix produced no change in the (pi-pi*) transition of POT structure, indicating that the polymeric chains were simply wrapped around and not doped by MWNTs. The electrochemical investigations highlighted significant changes in the redox properties of POT-MWNTs LS films with respect to pure POT. The cyclic voltammetric study also revealed high electrochemical stability, confirmed by the estimation of the diffusion coefficient and the photoelectrochemical response of the nanocomposite LS films. This characteristic turned out to be more evident than that obtained in our earlier studied poly(o-anisidine)-MWNTs (POAS-MWNTs) system.     

Hydrogen storage in ni nanoparticle-dispersed multiwalled carbon nanotubes

Hydrogen storage properties of mutiwalled carbon nanotubes (MWCNTs) with Ni nanoparticles were investigated. The metal nanoparticles were dispersed on MWCNTs surfaces using an incipient wetness impregnation procedure. Ni catalysts have been known to effectively dissociate hydrogen molecules in gas phase, providing atomic hydrogen possible to form chemical bonding with the surfaces of MWCNTs. Hydrogen desorption spectra of MWCNTs with 6 wt % of Ni nanoparticles showed that approximately 2.8 wt % hydrogen was released in the range of 340-520 K. In Kissinger's plot to evaluate the nature of interaction between hydrogen and MWCNTs with Ni nanoparticles, the hydrogen desorption activation energy was measured to be as high as approximately 31 kJ/mol.H(2), which is much higher than the estimates of pristine SWNTs. C-H(n)() stretching vibrations after hydrogenation in FTIR further supported that hydrogen molecules were dissociated when bound to the surfaces of MWCNTs. During cyclic hydrogen absorption/desorption, there was observed no significant decay in hydrogen desorption amount. The hydrogen chemisorption process facilitated by Ni nanopaticles could be suggested as an effective reversible hydrogen storage method.     

Polymer-functionalized multiwalled carbon nanotubes as lithium intercalation hosts

Multiwalled carbon nanotubes (MWNTs) functionalized with a hyperbranched aliphatic polyester and two different poly(ethylene glycol)s were synthesized by the reactions of carbonyl chloride groups on the surface of MWNTs and hydroxyl groups of polymers. Electrochemical intercalation of lithium in the three materials was investigated with galvanostatic charge-discharge experiments. The hyperbranched polymer-functionalized MWNT as an electrode material for lithium batteries showed a significant improvement over linear polymer-functionalized MWNTs in lithium insertion/deinsertion capacity and cycle stability. The MWNT functionalized with linear poly(ethylene glycol) showed a high initial capacity of lithium insertion/deinsertion but had the highest capacity fade rate among the materials. Because the polymers were chemically localized in the electrode-electrolyte interface, the comparison between hyperbranched and linear polymer-modified MWNTs manifested the important influence of the electrode-electrolyte interface on the electrochemical properties of lithium batteries.     

Electrically conductive transparent papers using multiwalled carbon nanotubes

We describe a novel class of electrically conductive transparent materials based on multiwalled carbon nanotubes (MWCNTs). Transparent nanocomposites were fabricated by incorporating an aqueous silk fibroin solution into bacterial cellulose membranes. The transparent nanocomposites had a high transmittance in the visible and infrared regions, regardless of the bacterial cellulose fiber content, due to the nanosize effect of the bacterial cellulose nanofibrils. This phenomenon allowed the preparation of a novel electrically conductive transparent paper. The high dispersity of the MWCNTs was realized by utilizing a bacterial cellulose membrane as a template to deposit them uniformly, thereby achieving electrically conductive transparent papers with outstanding optical transparency. The light transmittance and electrical conductivity varied according to the concentration of the MWCNT dispersion. Good optimal transparency and electrical properties were obtained with a light transmittance of 70.3% at 550 nm and electrical conductivity of 2.1 × 10^?3 S/cm when the electrically conductive transparent paper was fabricated from a 0.02 wt % aqueous MWCNT dispersion. In addition, the electrically conductive transparent papers showed remarkable flexibility without any loss of their initial properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1235–1242, 2008     

Water-soluble multiwalled carbon nanotubes functionalized with sulfonated polyaniline

Multiwalled carbon nanotubes (MWNTs) functionalized with a water-soluble conducting polymer, sulfonated polyaniline (SPAN), were prepared by in situ polymerization of aniline followed by sulfonation with chlorosulfonic acid in an inert solvent and by hydrolysis in water. Electron microscopy, laser Raman spectroscopy, X-ray photoelectron spectroscopy, and UV-vis absorption spectroscopy were employed to characterize the morphology and chemical structure of the resulting product. The results show that the quinonoid structure of SPAN preferentially interacts with the nanotubes and is stabilized by strong pi-pi interaction between two components. The structure of MWNTs was not perturbed by the incorporation of SPAN, since the pi-pi interaction between MWNTs and SPAN is much weaker in comparison to that of the carbon covalent bond. The SPAN functionalized MWNTs are highly dispersible in water, thus opening new possibilities for their prospective technological applications.     

Functionalization of multiwalled carbon nanotubes by mild aqueous sonication

Sonication has been widely used in the dispersal of carbon nanotubes (CNTs) in various liquids as well as in their functionalization in aqueous acids. Here, for the first time, we study the sonication of multiwalled CNTs (MWCNTs) in deionized water. Our results indicate an improvement in the aqueous dispersal of MWCNTs as well as an increase in their adhesive interaction with Au substrates. Field emission scanning electron and high-resolution transmission electron microscopies as well as X-ray photoelectron, photoacoustic Fourier transform IR, and Raman spectroscopies have shown this to be due to the production of low concentrations of O-containing functionalizations (alcohol, carbonyl, acid, with the total O concentration being approximately 2%), without damaging the basic CNT structure; this production of functional groups is mirrored by the disappearance of -CH(n) groups existing on the pristine CNTs. These new functional groups are capable of hydrogen bonding, which plays an important role in their aqueous dispersal and enhanced substrate interactions.     

Tensile properties,thermal and morphological analysis of thermoplastic polyurethane films reinforced with multiwalled carbon nanotubes

The paper reports on thermal, tensile and morphological properties of thermoplastic polyurethane (TPU) based films obtained by melt-compounding and chill-roll extrusion. Composite films containing up to 1 wt% of multiwalled carbon nanotubes (MWNTs) are characterized in terms of thermal properties, tensile behavior and morphological issues taking the neat TPU film as the reference material.     

Surface structure and adsorption properties of multiwalled carbon nanotubes

The pore structure, sorption parameters, and chemical composition of the surface of multiwalled carbon nanotubes synthesized by catalytic pyrolysis were determined. The dependences of the amount of cholic acid adsorbed by the nanotube surface on time, pH, and concentration of an equilibrium solution were studied. Physical adsorption of cholic acid is mainly the outcome of nonspecific interactions between the acid and the surface of the nanotubes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1712–1715, October, 2006.     

Deposition of gold nanoparticles onto thiol-functionalized multiwalled carbon nanotubes

Gold nanoparticles were deposited on the surface of multiwalled carbon nanotubes (MWNTs) functionalized with aliphatic bifunctional thiols (1,4-butanedithiol, 1,6-hexanedithiol, 1,8-octanedithiol, and 2-aminoethanethiol) through a direct solvent-free procedure. Small gold particles, with a narrow particle size distribution around 1.7 nm, were obtained on 1,6-hexanedithiol-functionalized MWNTs. For MWNTs functionalized with the aminothiol, the average Au particle size was larger, 5.5 nm, apparently due to a coalescence phenomenon. Gatan image filter (GIF) observations show that sulfur is at the nanotube surface with a non-homogeneous distribution. A higher sulfur concentration was observed around the gold nanoparticles' location.