Toughening of polycarbonate through reactive melt blending: Effect of hydroxyl content and viscosity of hydroxyl-terminated polydimethysiloxane

In this study, four hydroxyl-terminated polydimethylsiloxanes(PDMSOH) with different viscosities and hydroxyl contents were used to improve the toughness of polycarbonate(PC) through reactive melt blending. A largely improved toughness of PC has been achieved, and the low temperature toughness of PC/PDMSOH blends could overtake that of PC homopolymer in much higher temperatures(e.g.-10 °C versus 23 °C). Moreover, it was found that the more the hydroxyl content, the less the PDMSOH was needed to reach the highest toughness, suggesting that equivalent molar ratio between the carbonyl group content of PC and the hydroxyl group content of PDMSOH was required for the toughening of PC. Ultraviolet spectrophotometry was used to analyze the possible reaction between PC and PDMSOH. Contact angle was measured to assess the change of interfacial interaction between PC and PDMSOH as change of viscosity and hydroxyl content. The formation of PC-co-PDMSOH copolymer was believed to be the key for the toughening effect. This work gives a profound recommendation of the optimum kind and dosage of PDMSOH which should be used to improve the toughness of PC and will find immediate industrial applications.     

Synthesis of Oligomer and Styrene Polymer-supported Calix[4]arene Derivatives and Selective Extraction of Fe3+

Five new polymeric compounds containing more than one calix[4]arene have been synthesized by reacting an oligomer with 5,11,17,23-tetrakis[(diethylamino)methyl]-25,26,27,28-tetrahydroxycalix[4]arene (L1), 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone (L2), and p-nitrocalix[4]arene (L3), and chloromethylated polystyrene with 25,27-dimethyl-26,28-dihydroxy-p-tert-butylcalix[4]arene diketone (L4) and p-nitrocalix[4]arene (L5). These compounds were studied by the selective extraction of Fe³⁺ cation from the aqueous phase into the organic phase and was carried out by using compounds L1–L5. It was observed that the polymer support attached to the lower rim of p-nitrocalix[4]arene was the most efficient carrier of Fe³⁺ in the extraction process.     

Effect of transesterification products on the miscibility and phase behavior of poly(trimethylene terephthalate)/bisphenol A polycarbonate blends

Blends of poly(trimethylene terephthalate)/bisphenol A polycarbonate (PTT/PC) with different compositions were prepared by melt blending. The effect of transesterification on the miscibility and phase behavior of the blends was studied using DSC, DMA, and ¹H NMR. The DMA results revealed a two-phase system with partial miscibility. DSC thermograms of the first heating scan showed a crystallizable system in which addition of PC-phase reduces the degree of crystallinity. However, the cooling and also the second heating scans revealed the complete miscibility of all the blends. It was concluded that annealing at 300 °C (to remove thermal history of the blends) caused the constituents to undergo the transesterification reaction, which changes the blend to a miscible system. The miscibility is due to formation of block copolymers with different block lengths which also suppress the crystallization of the system. The degree of randomness and sequence lengths of the copolymers were determined to analyze the extent of transesterification reaction and structure of the system. It was observed that as the reaction progresses, the degree of randomness increases and the sequence length of the copolymers decreases. Moreover, both increase of reaction time and temperature increased the extent of reaction. The results of DSC and ¹H NMR showed that a small amount of reaction is needed to change this system to a miscible blend.     

Synthesis and photoluminescence properties of the high-brightness Eu-doped M2Gd4(MoO4)7 (M=Li, Na) red phosphors

A series of red-emitting phosphors Eu³⁺-doped M₂Gd₄(MoO₄)₇ (M=Li, Na) have been successfully synthesized at 850 °C by solid state reaction. The excitation spectra of the two phosphors reveal two strong excitation bands at 396 nm and 466 nm, respectively, which match well with the two popular emissions from near-UV and blue light-emitting diode chips. The intensity of the emission from ⁵D₀ to ⁷F₂ of M₂(Gd_1−xEu_x)₄(MoO₄)₇ phosphors with the optimal compositions of x=0.85 for Li or x=0.70 for Na is about five times higher than that of Y₂O₃:Eu³⁺. The quantum efficiencies of the entitled phosphors excited under 396 nm and 466 nm are also investigated and compared with commercial phosphors Sr₂Si₅N₈:Eu²⁺ and Y₃A₅O₁₂:Ce³⁺. The experimental results indicate that the Eu³⁺-doped M₂Gd₄(MoO₄)₇ (M=Li, Na) phosphors are promising red-emitting phosphors pumped by near-UV and blue light.     

Synthesis and characterization of cyclometalated iridium(III) complexes containing pyrimidine-based ligands

New pyrimidine derivatives (pyr) have been synthesized using palladium-catalyzed Suzuki coupling reaction. These compounds can undergo cyclometalation with iridium trichloride to form bis-cyclometalated iridium complexes, (pyr)₂Ir(acac) (acac = acetylacetonate; pyr = cyclometalated pyr). The substituents at the both cyclometalated phenyl ring and pyrimidine ring were found to affect both electrochemical and photophysical properties of the complexes. Computation results on these complexes are consistent with the electrochemical and photophysical data. The complexes are green-emitting with good solution quantum yields at ∼0.30. Light-emitting devices using these complexes as dopants were fabricated, and the device performance at 100 mA/cm² are moderate: 9 (17 481 cd/m², 4.8%, 18 cd/A, 5.1 lm/W); 10 (18 704 cd/m², 4.9%, 18.9 cd/A, 4.7 lm/W); 13 (20 942 cd/m², 5.4%, 21.0 cd/A, 6.1 lm/W).     

发红色荧光的类水滑石材料的制备及在LED中的应用

通过共沉淀法合成了发红色荧光的类水滑石材料,采用硅烷偶联剂对其进行了表面改性,并利用荧光光谱、红外光谱、X射线衍射(XRD)和扫描电子显微镜(SEM)等对其结构和性能进行了表征,探讨了表面改性对荧光类水滑石的影响.将改性荧光类水滑石与发射波长为384 nm的In Ga N芯片组合制成发光二极管,器件发出明亮的红光.研究结果表明,改性的发红色荧光的类水滑石是制作白光二极管可供选用的红色发光材料.     

Synthesis of soluble oligo- and polymeric pentacene-based materials

Functionalization of pentacene at the 6- and 13-positions affords versatile building blocks for oligomer and polymer formation. Di- and trimeric materials are synthesized using unsymmetrical building block 18, while symmetrical diol monomer 17 allows for the synthesis of polymers. The materials reported herein are soluble in common organic solvents and air-stable. UV-vis and fluorescence spectroscopic properties have been investigated. Solid-state X-ray crystallography of building blocks 17 and 19 shows that these derivatives can π-stack with significant acene face-to-face interactions with spacing of less than 3.5 Å.     

Synthesis, characterization, and OLED application of oligo(p-phenylene ethynylene)s with polyhedral oligomeric silsesquioxanes (POSS) as pendant groups

Two new classes of mono- and oligo(p-phenylene ethynylene)s grafted with polyhedral oligomeric silsesquioxanes (POSS) were synthesized via ‘click’ chemistry and palladium-catalyzed Sonogashira cross-coupling. These materials with cubic silsesquioxanes are very robust with excellent thermal stability in air (T_5%loss>330 °C) and exhibited T_g>80 °C. All the compounds showed high photoluminescence with a range of blue emission and quantum yield up to 80% in the solution. Extended π conjugation molecules of oligo-pPEs POSS maintain relatively high PL quantum efficiencies in the solid state, compared to mono-pPEs POSS. A preliminary report is made of some of the materials as multilayer OLED components with active dopants PVK and PBD.     

含吡啶基团的双极主体材料的合成、性能与蓝光电致磷光器件研究

吡啶类衍生物具有较好的电子传输性能和较高的三线态能级,在有机电致发光中一般用来构建电子传输材料或主体材料中的电子传输单元.本文通过将吡啶的2,6位与三苯胺或N-苯基-咔唑的邻位连接设计合成了两个基于吡啶的双极主体材料DTPAPPy和DCzPPy.它们的三线态能级分别为2.64和2.70eV.以它们作为主体材料制备的基于Firpic的蓝光磷光器件最大电流效率分别为15.4和25.3cd/A.     

Synthesis of electrically conductive polypyrrole-polystyrene composites using supercritical carbon dioxide: I. Effects of the blending conditions

The electrical conductivity for a polymer composite consisting of polypyrrole (PPy) and an insulating host polystyrene (PS) is reported in this study. The host polymer was blended with pyrrole monomer using either supercritical carbon dioxide (SCCO₂) or high-pressure liquid carbon dioxide (HPLCO₂) as the carrying solvent. After the blending process, the blended host polymer was soaked in an oxidant solution. This process is compared with that of oxidant impregnation. With the same processing conditions, a polymer composite with much higher conductivity was obtained when the blending process was carried out before doping in an oxidant agent. Scanning electron microscope (SEM) and elemental analysis reveal that polymerization proceeded when the blended host polymer was soaking in the oxidant solution. It is observed that SCCO₂ provides better conditions for blending the host polymer with pyrrole monomer than HPLCO₂ at the same density. The maximum conductivity of the polymer composites also increases with temperature and pressure at the same SCCO₂ density.     

Synthesis, photophysics and electroluminescence of new vinylene-copolymers with 2,4,6-triphenylpyridine kinked segments along the main chain

Two new vinylene alternating copolymers F and C that contained 2,4,6-triphenylpyridine as a common moiety and fluorene or carbazole, respectively, as an alternating moiety were prepared by Heck coupling. They showed an outstanding thermal stability being stable up to approximately 350 °C and had relatively high glass transition temperatures (140 and 111 °C). The existence of the 2,4,6-triphenylpyridine kinked units along the polymer backbone caused a partial interruption of the π-conjugation. The copolymers emitted blue-green light with emission maximum at 446-464 nm and quantum yields of 0.52 and 0.28 in THF solution. The electrochemical properties of copolymers F and C, including HOMO and LUMO levels, were estimated from their cyclic voltammograms. Their electroluminescence (EL) emission maxima (greater than 500 nm) showed significant red-shifts relative to the PL maxima, which has been explained by the direct cross recombination transition between electrons and holes trapped on carbazole or triphenylpyridine subunits. Moreover, the emission colors transform gradually with increasing bias and approach to white color at about 30 ∼ 35 V. The maximal luminance (maximal luminance efficiency) of the EL devices (ITO/PEDOT:PSS/F or C/Ca/Al) were 647 cd/m² (0.13 cd/A) or 615 cd/m² (0.10 cd/A), respectively.     

Synthesis of fluorene‐based hyperbranched polymers for solution‐processable blue,green, red,and white light‐emitting devices

For the purpose of making hyperbranched polymer (Hb‐Ps)‐based red, green, blue, and white polymer light‐emitting diodes (PLEDs), three Hb‐Ps Hb‐ terfluorene ( Hb‐TF ), Hb ‐4,7‐bis(9,9′‐dioctylfluoren‐2‐yl)‐2,1,3‐benzothiodiazole ( Hb‐BFBT ), and Hb‐ 4,7‐bis[(9,9′‐dioctylfluoren‐2‐yl)‐thien‐2‐yl]‐2,1,3‐benzothiodiazole ( Hb‐BFTBT ) were synthesized via [2+2+2] polycyclotrimerization of the corresponding diacetylene‐functionalized monomers. All the synthesized polymers showed excellent thermal stability with degradation temperature higher than 355 °C and glass transition temperatures higher than 50 °C. Photoluminance (PL) and electroluminance (EL) spectra of the polymers indicate that Hb‐TF , Hb‐BFBT , and Hb‐BFTBT are blue‐green, green, and red emitting materials. Maximum brightness of the double‐layer devices of Hb‐TF , Hb‐BFBT , and Hb‐BFTBT with the device configuration of indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/light‐emitting polymer/CsF/Al are 48, 42, and 29 cd/m²; the maximum luminance efficiency of the devices are 0.01, 0.02, and 0.01 cd/A. By using host–guest doped system, saturated red electrophosphorescent devices with a maximum luminance efficiency of 1.61 cd/A were obtained when Hb‐TF was used as a host material doped with Os(fptz)₂(PPh₂Me₂)₂ as a guest material. A maximum luminance efficiency of 3.39 cd/A of a red polymer light‐emitting device was also reached when Hb‐BFTBT was used as the guest in the PFO (Poly(9,9‐dioctylfluorene)) host layer. In addition, a series of efficient white devices were, which show low turn‐on voltage (3.5 V) with highest luminance efficiency of 4.98 cd/A, maximum brightness of 1185 cd/m², and the Commission Internationale de l'Eclairage (CIE) coordinates close to ideal white emission (0.33, 0.33), were prepared by using BFBT as auxiliary dopant. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Multifunctional polyesters as new candidate materials for biomedical applications. Synthesis and structural characterization

The present work was aimed at the development of functional polymeric materials to be used in the targeted delivery of proteic drug and tissue engineering fields. The adopted strategy was based on the design of special polymer classes whose structures and functionality could be easily modified by finely tuned synthetic procedures. Poly(ether ester)s containing H-bonding units were chosen as promising materials for the proposed applications. Commercially available precursors were successfully used for the synthesis of symmetrical diesters containing different H-bonding groups (amide, carbamate, and urea moieties). In all cases, pure products were obtained in good yields. Bulk polycondensation of the monomeric precursors with different mixtures of 1,4-butanediol and PEG 1000 diol afforded a variety of high molecular weight polymeric structures. Physical-chemical characterization of the polymers indicates that their thermal, mechanical, and swelling properties can be tailored by a proper selection of the H-bonding group and of the composition of the feed mixture.     

Synthesis and characterization of fluorene and carbazole dithienosilole derivatives for potential applications in organic light-emitting diodes

Several fluorene or carbazole-based dithienosiloles (DTSs) have been synthesized and their thermal, photophysical, and electrochemical properties have been systematically investigated. These compounds show high thermal stability with glass transition temperature above 110 °C as well as decomposition temperatures at ∼400 °C. Intense green emission is observed in the spectral region of 500-510 nm for all compounds (Φ_PL=0.31-0.80), that is, attributed to both the 5,5′-substituents of the DTS ring and DTS-based π-π^∗ transition. Based on the emission spectra at 77 K, the triplet energy for these compounds was calculated to be within 2.1-2.2 eV, indicating that they may be used as host materials for red emitters in organic light-emitting diodes (OLEDs). All compounds exhibit reversible oxidation and possess low-lying LUMO energies, owing to the conjugated fluorene/carbazole substituents on the DTS. This along with the high thermal/electrochemical stabilities and high fluorescent quantum efficiencies makes the new DTSs compounds promising candidates for use in OLEDs as emitters, host and electron-transporting materials.     

Synthesis, characterization and potential biomedical applications of N-succinimidyl ester functionalized, polypyrrole-coated polystyrene latex particles

N-Succinimidyl ester functionalized polypyrrole-coated polystyrene latex particles (PS_E-PPyNSE) were prepared by the in situ copolymerization of pyrrole and the active ester-functionalized pyrrole (pyrrole-NSE) in the presence of polystyrene latex particles. Polystyrene microspheres were prepared by emulsion polymerization (PS_E) leading to particles having a diameter of 450 nm. These PS_E particles were precoated with poly(N-vinylpyrrolidone) prior to the in situ copolymerization of pyrrole and pyrrole-NSE. The initial comonomer concentration fractions were 25/75, 50/50 and 75/25 for pyrrole and pyrrole-NSE, respectively. The PPy-coated PS_E particles were characterized in terms of morphology, particle size, electrophoretic mobility and chemical composition. The study of morphology by means of scanning electron microscopy showed roughening of the underlying PS_E particles owing to the addition of PPyNSE, the overlayer thickness of which was estimated to be around 7 nm. Moreover, loading PPyNSE overlayers resulted in a shift of the electrophoretic mobility from –5.31 m cm/V s to a very small but positive value (0.082–0.112 m cm/V s). X-ray photoelectron spectroscopy and IR spectroscopy permitted the detection of pyrrole-NSE repeat units at the surface indicating that pyrrole and pyrrole-NSE did indeed copolymerize. The PS_E-PPyNSE particles were further evaluated as bioadsorbents of human serum albumin used as a test protein. For this study, PS_E-PPyNSE₅₀ particles, synthesized from a comonomer feed ratio of 50/50 in pyrrole/pyrrole-NSE, were used and were shown to attach efficiently human serum albumin macromolecules with a maximum amount of 0.2 mg m^–2.

Design and Synthesis of Conjugated Starburst Molecules for Optoelectronic Applications

In recent years, conjugated starburst molecules, which possess a core unit with radial arms linked to the central axle, have become the research topic owing to their well‐defined chemical structures, good solution processability, excellent reproducibility, and superior optoelectronic properties. The increasing interest in starburst systems is evidenced by progressively more frequent investigation on the use of these materials in optoelectronics. The ability to modify chemical structures through control over the core and arms on a molecular level can directly affect the electronic and electroluminescent characteristics of the resulting materials. In this review, we summarize and discuss main progress in our group concerning the rapidly developing field, in which strategies for the design and construction of starbursts are presented at length. Moreover, their application in organic light‐emitting diodes (OLEDs) and organic semiconductor lasers (OSLs) are demonstrated as well, exploring the influence of molecular structures on the optoelectronic properties. Challenges and outlooks are also given at last.     

Synthesis and mesomorphic behaviour of high polarisability materials for non-linear optical applications

A variety of high polarisability materials have been synthesised with thioester and alkyne linking groups, and isothiocyanato and cyano terminal groups. The synthesis of these materials is presented and the transition temperatures and optical parameters of the materials are discussed and compared to those of the parent ester and non-linked analogues. The thioester and isothiocyanate units provide very high polarisabilities although the isothiocyanato unit leads to reduced mesophase thermal stabilities when compared to analogous cyano-terminated mesogens.     

Synthesis and characterization of fluorene‐based copolymers containing benzothiadiazole derivative for light‐emitting diodes applications

Five new thermally robust electroluminescent fluorene‐based conjugated copolymers, including poly[2,7‐(9,9‐dioctylfluorene)‐co‐4,7‐{5,6‐bis(3,7‐dimethyloctyloxymethyl)‐2,1,3‐(benzothiadiazole)}] ( PFO‐P2C₁₀BT ) were synthesized and used to fabricate the efficient polymer light‐emitting diodes (PLEDs). The glass transition temperatures of the polymers were found to be higher than that of poly(9,9‐dialkylfluorenes) and are in the range 113–165 °C. We fabricated PLEDs in indium‐tin oxide/PEDOT/light‐emitting polymer/cathode configurations using either double‐layer LiF/Al or triple‐layer Alq₃/LiF/Al cathode structures. The new copolymers were found to have emission colors that vary from greenish blue (491 nm) to green (543 nm) depending on the copolymer composition. The maximum brightness and luminance efficiency of these PLEDs were found to be up to 5347 cd/m² and 1.51 cd/A at 10 V, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6762–6769, 2008     

Host copolymers containing pendant carbazole and oxadiazole groups: Synthesis,characterization and optoelectronic applications for efficient green phosphorescent OLEDs

Vinyl copolymers (PCOn), containing pendant carbazole and aromatic 1,3,4‐oxadiazole attached with dodecyloxy group, were prepared from their corresponding precursor poly(9‐vinyl carbazole‐co‐4‐vinylbenzyl chloride) (PCBn) by the Williamson condensation (n: mole% of 4‐vinylbenzyl chloride). These copolymers were used as host materials for green phosphorescent light‐emitting diodes after blending 4 wt % of Ir(ppy)₃. PL spectra of the PCOn films showed the formation of excimer or exciplex. The phosphorescent EL devices were fabricated with a configuration of ITO/PEDOT:PSS/host copolymers:Ir(ppy)₃/BCP/Ca/Al. The PL and EL spectra of the blends [PCOn:Ir(ppy)₃] revealed dominant green emission at 517 nm attributed to Ir(ppy)₃ due to efficient energy transfer from the host to Ir(ppy)₃. Efficient green phosphorescent OLEDs was obtained when employing copolymer PCO16 as the host and Ir(ppy)₃ as the guest. The maximal luminance efficiency and the maximal luminance of this device were 17.9 cd/A and 19,903 cd/m², respectively. After doped with Ir(ppy)₃, the morphology of the films, both controlled PCO20 and PCO20 with attached dodecyloxy groups, were investigated by tapping‐mode AFM and FE‐SEM. The film of PCO20 exhibited uniform, featureless image and showed much better device performance than PCO20, which have been attributed to good compatibility of PCO20 with Ir(ppy)₃. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5180–5193, 2008