沉淀剂对含有氨侧基的聚苯撑乙炔发光性能的影响

通过单体4-[(2,5-二溴苯)乙炔基]苯胺和1,4-二乙炔基-2,5-二戊氧基苯之间的Sonogashira偶合反应合成了带有p-氨基苯乙炔基共轭侧基的聚对苯撑乙炔（(PAnPE）). 该共轭聚合物的THF溶液（(2××10-－5 mol•·L-－1）)在473和519 nm处呈现两个比较强的荧光发射峰. 通过调节在聚合物PAnPE-THF溶液中所加入三种沉淀剂（(甲醇、乙酸、稀盐酸溶液）)的体积比例, 来改变PAnPE分子链的聚集态结构, 进而研究对其发光性能的影响规律. 实验结果表明: 由于沉淀剂与聚合物PAnPE分子链之间相互作用能力与方式的不同, PAnPE两个荧光峰的发射强度因聚合物分子链聚集结构不同而呈现不同的变化规律, 这有助于实现在化学传感器中的应用.     

Synthesis and properties of sulfur‐contained poly(silylene arylacetylene)s

Poly(silylene arylacetylene) (PSA) is a kind of poly(arylacetylene) silicon‐containing resins with excellent heat resistance and good mechanical performances. In this article, the sulfur atom is introduced into the main chain of the PSA molecule to obtain a sulfur‐containing poly(silylene arylacetylene), named S‐PSA. By Williamson and Sonogashira reactions, bis(4‐ethynylphenyl)sulfide and bis(4‐ethynylphenyl)sulfone were synthesized. Thereafter, through Grignard reagent way, the poly(silylene ethynylene phenylene sulfide phenylene ethynylene) (PSESE) and poly(silylene ethynylene phenylene sulfone phenylene ethynylene) (PSESO₂E) were synthesized from bis(4‐ethynylphenyl)sulfide, bis(4‐ethynylphenyl)sulfone, and methylphenyl dichlorosilane. Poly(silylene ethynylene phenylene sulfoxide phenylene ethynylene) (PSESOE) was synthesized by the oxidation of PSESE. The structures and properties of these resins were characterized and the mechanical properties of the T300 reinforced composites were tested. The results show that the novel S‐PSA resins have excellent heat resistance and good mechanical properties, and could be used as resin matrices for high‐performance composites in high‐tech fields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2324–2332     

结晶／结晶共混体系聚苯硫酸／聚醚醚酮中聚醚醚酮组分的结晶熔融行为──熔融温度的影响

结晶／结晶共混体系聚苯硫酸／聚醚醚酮中聚醚醚酮组分的结晶熔融行为──熔融温度的影响麦堪成，许家瑞，梅震，曾汉民（中山大学材料科学研究所，广州，５１０２７５）关键词聚醚醚酮，聚苯硫醚，结晶／结晶共混物，结晶熔融行为近年来，高性能聚合物共混物如聚砜（ＰＳ...     

Synthesis,identification and study of electrical conductivity of the doped poly aniline

Poly aniline and poly aniline doped with 2,5-dimethyl benzene sulfonic acid (PXSA), 4-hydroxy-m-benzene disulfonic acid (PDSA), 3-chloro-4-hydroxybenzene sulfonic acid (OCPSA) were prepared. The polymers are identified by FT-IR and UV–vis spectroscopy. The ionic conductivities of poly aniline and poly aniline doped with 2,5-dimethyl benzene sulfonic acid (PXSA), 4-hydroxy-m-benzene disulfonic acid (PDSA), 3-chloro-4-hydroxybenzene sulfonic acid (OCPSA) were studied as a function of weight of the dopant compounds. It is noted that an increase of the conductance of poly aniline by doping with OCPSA, and became equal to 0.001321 Ω^?1 for 1 g higher than the conductance for the poly aniline when it is doped with OCPSA.     

结晶／结晶共混体系PPS／PEEK中PPS组分的结晶熔融行为（Ⅱ）──熔融条件对退火样品的影响

结晶／结晶共混体系ＰＰＳ／ＰＥＥＫ中ＰＰＳ组分的结晶熔融行为（Ⅱ）──熔融条件对退火样品的影响麦堪成，许家瑞，梅震，曾汉民（广州中山大学材料科学研究所，广州，５１０２７５）关键词聚苯硫醚，聚醚醚酮，结晶熔融行为，熔融双峰聚苯硫醚（ＰＰＳ）的结晶熔融行...     

Miscibility predictions for poly(phenylene sulfide): Heats of mixing of model compounds

Calorimetry was used to gain insight into the thermodynamics of mixing of unlike species, designed to represent organic polymers. These results are to be useful in predicting miscibility between various polymers and poly(arylene sulfides). Phenyl sulfide (PS) and phenyl disulfide (PSS) were used as models for poly(phenylene sulfide) (PPS) and were mixed with model compounds that are representative of other polymer classes. The enthalpy of mixing was measured for a large number of combinations. The results are interpreted in terms of a summation of the effects of specific interactions and dispersive forces. It is seen from these data that the presence of aromatic side groups enhances the miscibility of the species with the poly(phenylene sulfide) model compound. Furthermore, exothermic heats of mixing were observed between the PPS model and compound. Furthermore, exothermic heats of mixing were observed between the PPS model and compounds that contain carbonyl, amide, or amine moieties. Finally, the sulfur atom in PPS seems to play only a minor role in determining its interactions with other species. Replacing sulfur with oxygen (or even an alkyl group) is seen to have very little effect on the heats of mixing results. © 1994 John Wiley & Sons, Inc.     

A Highly Sensitive Electrochemiluminescence Choline Biosensor Based on Poly(aniline‐luminol‐hemin) Nanocomposites

Poly(aniline‐luminol‐hemin) nanocomposites are prepared on an electrode surface through electropolymerization, and a highly sensitive electrochemiluminescence (ECL) biosensor for choline is developed based on the poly(aniline‐luminol‐hemin) nanocomposites and an enzyme catalyzed reaction of choline oxidase (CHOD). The obtained nanocomposites are characterized by scanning electron microscopy (SEM), atomic absorption spectrometry (AAS) and ECL. The results indicate that hemin can be incorporated into the poly(aniline‐luminol) nanocomposites using the facile electropolymerization method, and the poly(aniline‐luminol‐hemin) nanocomposites are rod shaped porous nanostructure. Moreover, the poly(aniline‐luminol‐hemin) nanocomposites exhibit higher ECL intensity than poly(aniline‐luminol) nanocomposites in alkaline media due to the catalytic effect of hemin on the ECL of the polymerized luminol and the electron transfer ability of hemin in the nanocomposites. CHOD is immobilized on the surface of the poly(aniline‐luminol‐hemin) nanocomposites modified electrode with glutaraldehyde, and the ECL biosensor based on poly(aniline‐luminol‐hemin)/CHOD exhibits a wider linear range for the choline detection. The enhanced ECL signals are linear with the logarithm of concentration of choline over the range of 1.0×10^?11～1.0×10^?7 mol L^?1 with a low detection limit of 1.2×10^?12 mol L^?1. Moreover, the proposed biosensor is successfully applied to the detection of choline in milk.     

Charge compensation dynamics in a soluble copolymer of poly(aniline) and poly(phenylene sulfide)

Poly(phenylene sulfide phenyleneamine), PPSA, is a copolymer of poly(aniline) and poly(phenylene sulfide), soluble in conventional organic solvents as tetrahydrofuran, dimethyl sulfoxide, dimethylformamide, and cyclohexanone. In this research, its electrochemical behavior has been studied in acetonitrile in the presence of different electrolytes, where the loss of electroactivity was observed after few cycles. In this paper, the charge compensation dynamics of PPSA is analyzed through electrochemical quartz crystal microbalance experiments and electroacoustic impedance measurements. Raman spectroscopy data have shown that once the oxidation of the sulfur atom occurs, a loss of electroactivity is observed, being not possible to recover the pristine state of the polymer. Fourier transform infrared (FTIR) and X-ray diffraction (XRD) data obtained for the fully oxidized polymer are consistent with the formation of a networked polymer due to the electrophilic attack of the positive sulfur atom on the activated aromatic rings. Electrochemical quartz crystal microbalance results clearly show that the degree of irreversibility fully depends on the chemical nature of the anions with a negligible participation of the cations of the electrolytic solution. This work is in memoriam of Prof. Dr. Francisco C. Nart, dearest friend and colleague, whose scientific skills and enthusiasm will always be remembered.     

聚酰亚胺对高性能树脂共混体系界面的反应增强

研究了以5-降冰片烯-2,3-二羧酸单甲酯为端基的PMR型聚酰亚胺(POI)作为界面介质对部分相容的聚醚砜/聚苯硫醚(PES/PPS)、聚醚醚酮/聚醚砜(PEEK/PES)共混体系的界面性质、形态结构及结晶行为的影响.结果表明,POI可以有效地增强两相间的界面粘结,显著降低PPS/PES共混物中PPS分散区的尺寸,改善两组分间的相容性.在熔融共混过程中,POI从本体向界面扩散并同PPS,PES产生交联和/或接枝,POI同PPS的反应活性远高于PES,但POI与PES发生反应.POI是PPS结晶的有效成核剂.     

SYNTHESIS,CHARACTERIZATION AND QUENCHING BEHAVIOR OF A CATIONIC POLY(p-PHENYLENEVINYLENE) RELATED COPOLYMER

A cationic poly(p-phenylene vinylene) related copolymer without bulky phenylene substitutents attached to the conjugated backbone was prepared through Wittig reaction.The molecular structure and optical properties were highly investigated through ~1H-NMR,UV and PL spectroscopy.The quenching behavior was also investigated,and the results demonstrate that incomplete quenching exists,which is consistent with the cationic poly(p-phenylene vinylene) related copolymer containing bulky phenylene substitutents,p...     

亚砜还原法合成聚苯醚硫醚的结构与性能研究

以氟苯和氯化亚砜反应合成了4,4’-二氟二苯亚砜,并将其与4,4’二羟基二苯硫醚在N-甲基吡咯烷酮溶剂中进行亲核取代反应合成了聚苯醚硫醚醚亚砜,用乙二酰氯/四丁基碘化铵还原该亚砜聚合物制备了聚苯醚硫醚。用红外光谱和核磁共振谱对合成单体的结构进行了确认,同时对聚合物进行了红外光谱、核磁共振、元素分析、X射线光电子能谱、X射线衍射、DSC分析、TG/DTG以及溶解性测试。结果表明聚苯醚硫醚样品具有氧醚和硫醚交替的线性结构,特性粘度为0.55 dL/g的PPSE熔点达236℃,在氮气条件下,样品起始分解温度和最大分解速率处温度分别为359℃和514℃,在700℃时的重量保留率为43.3%,且在加热条件下能溶解于N-甲基吡咯烷酮(NMP)、二甲基乙酰胺(DMAc)、二甲基甲酰胺(DMF)等极性有机溶剂中。     

聚苯硫醚反应淤浆的处理工艺

综述了聚苯硫醚反应淤浆的处理工艺，包括聚苯硫醚树脂的收集，溶剂的回收和反应助剂的回收两部分，并展望了聚苯硫醚反应淤浆处理工艺的发展趋势。     

Phase separation in semicrystalline blends of poly(phenylene sulfide) and poly(ethylene terephthalate). I. Preparation of poly(phenylene sulfide)-graft-poly(ethylene terephthalate) copolymers by ester interchange and characterization utilizing the model compound 2,4-bis(phenylthio benzoic acid)

Blends of carboxyl functionalized poly(phenylene sulfide) (PPS) and poly(ethylene terephthalate) (PET) were shown to undergo an ester interchange reaction during melt blending. Pendent carboxyl functionality randomly incorporated along the PPS chain reacts with the ester moiety of PET to form a graft copolymer. A model compound, 2,4-bis(phenylthio benzoic acid), has been synthesized to assist in defining the level of carboxyl functionality on the PPS chain. Evidence of the grafting reaction has been gathered from infrared spectroscopy, solubility measurements, and electron microscopy. When added to blends of PPS and PET homopolymers, the graft copolymer significantly reduces the average domain size of the dispersed phase across the entire composition range. This study describes the role that graft copolymers formed by ester interchange reactions can play in compatibilizing this immiscible blend system, with particular focus on the conditions leading to increased grafting efficiency. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3473–3485, 1999     

几种热塑性特种工程塑料的热分析研究

聚芳醚和聚芳硫醚两类聚合物都为热塑性的耐高温特种高分子材料 ,由于它们的加工性好、加工成型效率高 ,受到了世界各国的高度重视。这两类聚合物在结构上有许多相似之处 ,如它们的主链都含苯环、酮基或砜基 ,而聚芳醚类聚合物的柔性基团为醚键 ,聚芳硫醚类聚合物的柔性基团为硫醚键 ,但由于氧和硫在元素周期表中属于同一族元素 ,原子结构仍然相似 ,因而在某些方面具有一定的可比性。研究它们的性能差异对于改进聚合物性能以及进行进一步的结构设计将有一定的帮助。在这两类聚合物中 ,国内已商品化生产的品种有ＰＥＥＫ、ＰＥＳ和ＰＰＳ ,有…     

金属钠—硫磺法合成聚苯硫醚

以金属钠和硫磺为原料,六磷胺作溶剂合成了聚苯硫醚。本工作表明,反应分为两个阶段,首先硫八元环断裂生成了由硫化钠和六磷胺组成的中间产物,中间产物再与对二氯苯反应生成聚苯硫醚。本工作还对钠与溶剂的反应及反应中微量水的影响作了研究。     

SYNTHESIS OF HIGH MOLECULAR WEIGHT POLY(p-PHENYLENE SULFIDE)RESINS

利用天然气脱硫厂的酸气、氢氧化钠、对二氯苯和助剂磷酸钠，在六甲基苯磷酰三胺溶剂中，常压下缩聚４～６小时，制备了线型结晶性高分子量聚苯硫醚（ＨＭＷＰＰＳ）。该方法具有的明显优点是：设备简单、容易操作、活性高、溶剂稳定、产品收率高、成本低、适宜于大规模工业生产。     

自掺杂基团对聚苯胺自组装膜电化学性能的影响

基于离子相互作用,实现了以聚苯胺(PANI)为聚阳离子,以聚(邻氨基苯甲酸)(PCAN)、聚(邻氨基苯磺酸)(PSAN)为聚阴离子的层-层自组装,形成层厚均匀的全共轭超薄功能膜.由于磺酸基—SO3-的电负性高于—COO-,使得PANI-PSAN自组装膜沉积量小于PANI-PCAN;电化学实验结果显示,由于PCAN和PSAN的导电性均弱于PANI,所以两种自组装膜的电化学性能取决于PANI,但同时受到羧酸、磺酸基团的较大影响,使得PANI-PCAN自组装膜的电化学性能要优于PANI-PSAN.     

Poly(Azomethine Sulfones). I. Synthesis and Characterization of New Poly(Azomethine Sulfones) Containing Ortho/Para Aromatic Moieties

Abstract

New poly(azomethine sulfones) with linear structures containing methylene bis(2-oxobenzylidene aniline), methylene bis(4-oxobenzylidene aniline), 1,4-bis(4-oxobenzylidene amino)phenylene and 1,4-bis(2-oxobenzylidene amino)phenylene units were prepared in the conventional literature manner by the reaction of azomethine bisphenols (M 1–4) with 4,4′-sulfonyl bischlorobenzene. The resulting polymers were confirmed by IR, ¹H-NMR and elemental analysis, and were characterized by UV measurements, viscosities, solubilities, DSC and thermo-gravimetric analysis (TGA) in air. A difference in the solubility and thermal behavior between the polymers with ortho- and para- chains was observed. The hydrolitic stability of the polymers in 10% wt aqueous sulfuric acid was reasonable     

羧化聚苯醚离聚体/磺化聚苯乙烯离聚体共混体系中离子基团的增容作用

用ＤＳＣ方法研究了羧化聚苯醚（ＣＰＰＯ）／磺化聚苯乙烯（ＳＰＳ）、以及它们对应的碱金属离子（Ｌｉ＋、Ｎａ＋、Ｃｓ＋）中和的离聚物共混体系的相容性．结果表明，这一体系具有较宽的相容范围，金属离子的引入使共混体系的相容性有所变化，Ｌｉ＋和Ｃｓ＋能促进相容性，而Ｎａ＋则使相溶性略有减弱．     

Synthesis of polyphenylene ether and thioether ketones

The known polymerization of 4,4′-difluorobenzophenone (DFB) with the dianion of hydroquinone to poly(phenylene ether ether ketone) (PEEK) and polymerization of either DFB with the dianion of 4,4′-dihydroxybenzophenone or self polycondensation of the anion of 4-hydroxy-4′-fluoro-benzophenone to poly(phenylene ether ketone) (PEK) were studied in N-cyclohexyl-2-pyrrolidone (CHP), which is a high-boiling aprotic polar solvent. The formation of high-molecular weight PEEK and PEK in this solvent was very efficient. The reactivity in CHP can be ascribed to effective solvation of metal ions rendering the anion very reactive toward nucleophilic substitution. The polymerization was extended to 4,4′-bis(4-fluorobenzoyl)diphenyl ether and 1,4-bis[4-(4-fluorobenzoyl)phenoxy]benzene to give a high molecular weight polymer with PEK and PEEK repeating units and PEEK respectively. The polymerization of DFB with purified anhydrous sodium sulfide in CHP gave rapidly a high molecular weight poly(phenylene ketone sulfide) (PKS). In contrast, diphenyl sulfone (DPS) was not very effective in obtaining such a high molecular weight PKS even with prolonged heating, which suggests the uniqueness of CHP in promoting a high degree of polymerization.