Polymerization behavior of bistrimethylsilyloxycycloalkenes

The radical copolymerizations of bistrimethylsilyloxycycloalkenes, such as 1,2-bistrimethylsilyloxycyclobutene (I), 1,2-bistrimethylsilyloxycyclopentene (II), and 1,2-bistrimethylsilyloxycyclohexene (III), were carried out with acceptor monomers, such as maleic anhydride, N-phenylmaleimide, and methyl methacrylate. I and II gave alternating copolymers with maleic anhydride and random copolymers with N-phenylmaleimide but no copolymer with methyl methacrylate. III gave no copolymer with the acceptor monomers. These polymerization behaviors of bistrimethylsilyloxycycloalkenes were explained primarily in terms of the electron donor–acceptor interaction between both monomers.     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003     

Synthesis and characterization of poly[(3,4-dihydro-2h-pyran)-alt-(maleic anhydride)] and its derivatives: Biologically active polymers

The syntheses of several monomers, bioactive poly[(3, 4-dihydro-2H-pyran)-alt-(maleic anhydride)] and its derivatives, which have different substituents (e.g., acetoxy, methoxy, ethoxy, methoxycarbonyl, formyl, acetoxymethyl, and tosyloxymethyl groups) in the 2-position of the tetrahydropyran ring of the copolymer backbone, are described. The alternating sequences in copolymers of the dihydropyran derivatives and maleic anhydride were obtained from the equimolar and larger ratios of maleic anhydride to dihydropyran derivative at the onset of the copolymerization. The molecular weights of the copolymers were found to be low (M_n = 1000–7500) due to a transfer reaction of the dihydropyran derivatives. Hydrolyses of the anhydride groups in the copolymers without catalyst afforded poly[(dihydropyran)-alt-(maleic acid)] and its derivatives, whereas an additional three copolymers having substituents, e.g., hydroxy, hydroxymethyl, and carboxyl groups were obtained by hydrolyses of the pendent groups (acetoxy, acetoxymethyl, and methoxycarbonyl) with the aid of a hydroxide catalyst. Carbamoyl groups on the polymers were obtained from ammonolysis of methoxycarbonyl groups. The polymers having mercaptomethyl or aminomethyl groups were obtained by substitution of hydrogen sulfide or ammonia for tosyloxylmethyl groups.     

Radical and anionic homopolymerization of maleimide and N-n-butylmaleimide

The rate of homopolymerization of maleimide has been measured in dimethylformamide solution at 60°C. in the presence of azobisisobutyronitrile; it has been compared to that of N-n-butylmaleimide. The overall rates of polymerization are equal to R_p = k[M]^1.1–1.2 [In]^0.8 for maleimide, and R_p = k'[M] [In]^0.5 for the N-substituted imide. The difference of behavior has been interpreted on the basis of an intramolecular tautomery of the terminal group of the maleimide growing chain and the formation of a resonance-stabilized succinimidyl radical. The relative ease of polymerization of these monomers and of maleic anhydride has been discussed. In the presence of sodium tert-butoxide at 20°C. in dimethylformamide solutions, maleimide polymerizes with hydrogen isomerization. The percentage of N-substituted isomerized units was evaluated at 70–75% by measurement of the rate of hydrolysis in 0.005N sodium hydroxide and comparison with succinimide and N-butylsuccinimide. N-n-butylmaleimide undergoes ring opening together with anionic polymerization in the presence of sodium tert-butoxide at 20°C. and butyllithium at -40°C. Unlike the radical-initiated polymerization, it was impossible to obtain anionic copolymers of maleimide and N-butylmaleimide with acrylonitrile and methyl methacrylate.     

Novel dialkyl vinyl ether phosphonate monomers: Their synthesis and alternated radical copolymerizations with electron‐accepting monomers

Three new vinyl ether monomers containing phosphonate moieties were synthesized from transetherification reaction. We showed that the yield was dependent on the spacer length between the vinyl oxy group and the phosphonate moieties: when the spacer is a single methylene side reaction may occur, leading to the formation of acetal compounds. Free‐radical copolymerizations of phosphonate‐containing vinyl ether monomers with maleic anhydride were carried out, leading to alternated copolymers of rather low molecular weights (from 1000 to 7000 g/mol). Both gel permeation chromatography and ³¹P NMR analyses enhanced possible intramolecular transfer reactions occurring from the phosphonate moieties. Kinetic investigation showed that the electron‐withdrawing character of the phosphonate moieties tends to decrease the rate of copolymerization. Nevertheless, almost complete monomers conversion was reached after 30 min of reaction with dimethyl vinyloxyethylphosphonate (VEC₂PMe). Then, radical copolymerization of VEC₂PMe with a series of electron‐accepting monomers, that is, dibutyl maleate, dibutylitaconate, itaconic anhydride, butyl maleimide, and methyl maleimide, led to a series of alternated copolymers. From kinetic investigation, we showed that the higher the electron‐accepting effect, the faster the vinyl ether consumption and the higher the molecular weights. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Laser-Initiated copolymerization of N-vinylpyrrolidone with maleic anhydride and maleimide

This article describes the laser-initiated copolymerization of N-vinylpyrrolidone with maleic anhydride and maleimide via charge transfer complexes. The dependence of copolymer yield on the molar ratios of the monomers in the feed and on the irradiation time is described. Based on the ultraviolet and infrared spectroscopy, and chemical analysis results, a tentative mechanism of polymerization is suggested. The rates of polymerization of several monomer systems are compared. The N-vinylpyrrolidone and maleimide system shows the highest rate of polymerization.     

Water-Soluble imide-amide copolymers. I. Preparation and characterization of poly [acrylamide-co-sodium N-(4-sulfophenyl) maleimide]

Sodium N-(4-sulfophenyl) maleimide (SPMI) and its saturated succinimide counterpart were first prepared according to established methods. Hydrolysis experiments on these monomers monitored by ¹H-NMR showed that although SPMI monomer was about 15% hydrolyzed in D₂O at 23°C in 24 h. Sodium N-(4-sulfophenyl) succinimide, which is similar in structure to the imide units in the copolymers, was only 1% hydrolyzed after 18 days at 23°C and 29% hydrolyzed after 18 days at 60°C. This indicated that the saturated imide rings in the copolymer might be sufficiently stable to hydrolysis for the copolymers to be useful. However, hydrolysis at high pH demonstrated that the imide rings would be rapidly saponified under alkaline conditions, destroying the structural rigidity that the intact rings might have provided in the copolymer chains. Sodium N-(4-sulfophenyl) maleimide (SPMI) was copolymerized with acrylamide in water at 30°C without cleavage of the imide ring. Water-soluble poly [acrylamide-co-sodium-N-(4-sulfophenyl) maleimide] (PAMSM) samples containing from 7.4 to 64 mol % imide were prepared. Photoacoustic FTIR and ¹³C-NMR spectra were used to confirm the structure of the copolymers obtained. Elemental analysis was used to determine the imide content of the copolymers, and from this composition data reactivity ratios were calculated for the two component monomers.     

Characterization of chloroprene and maleic anhydride copolymer by 13C-NMR spectroscopy and pyrolysis GC/MS

The radical copolymerizations of chloroprene (CP) and maleic anhydride (MAH) were carried out with AIBN in 1,4-dioxane at 60°C. The monomer reactivity ratios were estimated as r₁ (CP) = 0.38 and r₂ (MAH) = 0.07. Microstructures in the copolymer of chloroprene (CP) and maleic anhydride (MAH) were investigated by 75.4 MHz ¹³C-and 300 MHz ¹H-NMR spectroscopies. Resonances were assigned to the monomer sequence dyads CC, CM, and MC (C = chloroprene, M = maleic anhydride). Well resolved fine structure in the ¹³C-NMR spectra showed that 1,2- and 3,4-structural chloroprene units were negligible in the copolymer. The pyrolysis characterization of the copolymer was also investigated by the pyrolysis gas chromatography mass spectrometry (GC/MS). The fragments of CP and MAH monomers and CP-MAH hybrid dimer, CO, and CO₂ were identified after pyrolysis of the copolymer. © 1994 John Wiley & Sons, Inc.     

Dehydrocoupling and Diels–Alder reactions on siloxane polymers

Dehydrocoupling reactions between linear poly(methylhydrosiloxane) {Me₃SiO–[MeSi(H)O]_n–SiMe₃} and alcohols such as cholesterol, anthracene‐9‐carbinol, (12‐crown‐4)‐2‐carbinol, pyrene‐1‐carbinol, 4‐methyl‐5‐thiazoleethanol, and 4‐pyridilpropanol were introduced under catalytically mild conditions. The degrees of conversion of Si? H bonds in polysiloxane were monitored with ¹H NMR spectra. The reaction of the 9‐methoxyanthracene adduct on siloxane polymers and maleimide derivatives (maleimide, N‐ethylmaleimide, and maleic acid anhydride) produced [2+4]‐cycloadducts in very high yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4013–4019, 2002     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

Organometallic polymers. XXIV. Radical-initiated copolymerization of ferrocenylmethyl acrylate and methacrylate with acrylonitrile,maleic anhydride,and N-vinyl-2-pyrrolidone

Ferrocenylmethyl acrylate (I) and ferrocenylmethyl methacrylate (II) have been readily copolymerized with maleic anhydride in benzene–ethyl acetate solutions. Similarly, II has been copolymerized with both acrylonitrile and N-vinyl-2-pyrrolidone in benzene solutions to give higher molecular weight copolymers in high yields. In all cases azobisisobutyronitrile has been the initiator. Based on e values obtained, the metal carbonyl substituent acts as an electron-withdrawing group. Over a wide range of comonomers (N-vinyl-2-pyrrolidone, styrene, vinyl acetate, methyl acrylate, acrylonitrile, and maleic anhydride) I and II exhibit r₁ values lower than (and r₂ values higher than) similar copolymerizations with methyl acrylate or methyl methacrylate. Further more, the Q values found for I (0.03–0.11) and II (0.08–0.18) are smaller than those for methyl acrylate (0.46) and methyl methacrylate (0.74). Thus, I and II are less reactive than expected, presumably due to steric effects.     

A study of the relative reactivity of maleic anhydride and some maleimides in free radical copolymerization and terpolymerization

Composition data for the free radical copolymerization of maleic anhydride with N-phenylmaleimide in toluene at 60°C have been obtained. Relative reactivity ratios in terminal and penultimate models using nonlinear least-squares optimization routine have been determined. The standard error was found to be somewhat smaller in the penultimate model, but is still larger than the uncertainty estimated for the copolymer composition. Terpolymers of maleic anhydride and styrene with maleimide, N-butylmaleimide, N-phenylmaleimide, and N-carbamylmaleimide were obtained. On the basis of analysis of the product composition at various monomer feeds the relative reactivity of maleic anhydride and maleimides in these reactions is compared and the influence of the structure of thesemonomers on the rate of some chain growth reactions is discussed.     

Novel Copolymers of 4-Fluorostyrene. 3. Some Ring-Substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₄CH=C(CN)₂ (where R is 4-dimethylamino, 4-diethylamino, 3-phenoxy, 3-benzyloxy, 4-benzyloxy, 4-acetoxy, 2-cyano, 3-cyano, and 4-cyano) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3-benzyloxy (2.9) > 4-cyano (2.7) > 3-phenoxy (1.9) > 4-acetoxy (1.8) > 3-cyano (1.7) > 2-cyano (1.6) > 4-benzyloxy (0.6) > 4-dimethylamino (0.4) = 4-diethylamino (0.4). High T _g of the copolymers, in comparison with that of poly (4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 290–400°C range with residue, which then decomposition in 400–800°C range.     

Alternating terpolymerization of three non-homopolymerizable monomers

The free-radical terpolymerization of maleic anhydride (MSA), isobutyl vinyl ether (VIBE) and anethol (ANE) at 60°C is described. These three monomers do not homopolymerize under the conditions used. Binary copolymers are only obtained from MSA and one of the two investigated donor monomers, whereas the binary copolymerization of VIBE with ANE is not possible. In all terpolymers from these three non-homopolymerizable monomers the MSA content amounts to about 50 mol-%; VIBE is about twice as reactive as ANE. The terpolymerization can formally also be described under the assumption that two binary complexes (MSA/ANE (I) and MSA/VIBE (II)) are copolymerized. For this case the reactivity ratios r_I = 0,9 and r_II = 1,7 are obtained.     

Ibrational spectra of maleimide, N-deuterated maleimide and maleic anhydride in low-temperature matrices

Infrared and Raman spectra are reported for maleimide, N-deuterated maleimide and maleic anhydride in argon and nitrogen matrices and in the solid phase at 20 K. The data enabled a revised vibrational assignment to be made for the monomers of maleimide and N-deuterated maleimide, while the assignment for the dimers was mainly in agreement with previous work. The interaction of maleimide with nitrogen, water and hydrogen chloride was also investigated. Water and hydrogen chloride form hydrogen-bonded complexes with a carbonyl group of the maleimide, whereas nitrogen interacts with the NH group.     

Synthesis of Amphoteric Surfactants via Esterification Process

This article describes the synthesis of a novel amphoteric surfactant through esterification of 2‐hydroxy‐N,N,N‐trimethylethanaminium chloride with maleic acid alkyl ester of C₈, C₁₀, and C₁₂ chain length in the presence of base. Maleic acid alkyl esters were synthesized by the reaction of maleic anhydride with alkyl alcohol. Surface‐active properties were studied by different techniques such as surface tension and foaming property. Critical micelle concentrations (CMCs) were found by using surface tension values to learn the effect of chain length on CMC of synthesized surfactants. The best result obtained has minimal coproducts, an environmentally safer route, and a very good CMC value of surfactants.     

One-step synthesis of macromonomers catalyzed by phosphazene base

Herein, we report one-step synthesis of polymethacrylates-based macromonomers (MMs) in the presence of an organocatalyst phosphazene base (t-BuP₄) and a functional initiator N-butyl-4-vinylbenzamide (N-BVBA) containing a secondary amide and a styrenic double bond. A series of styrenic MMs with controlled molecular weight and relatively narrow polydispersity were synthesized under mild conditions. Detailed NMR analyses of the initiation process suggested that the anionic polymerization was initiated by nitrogen anion generated from abstraction of the proton from the secondary amide. NMR and MALDI-TOF MS analyses confirmed: (1) the selective polymerization of methacrylate-type double bonds, (2) controlled chain-end functionality of MMs with an unreacted styrenic double bond, as well as (3) the absence of transesterification between N-BVBA and methacrylate monomers. Furthermore, the homopolymerization and copolymerization of the MMs with comonomers were carried out for the preparation of graft copolymers. Through conventional radical polymerization, graft copolymers with different grafting densities were obtained at high MMs conversions, indicating the high reactivity of MMs. Thus, the one-step approach demonstrates a simple metal-free access to the controlled synthesis of MMs, and the prepared MMs can polymerize efficiently to convert into graft copolymers.     

SYNTHESIS AND THERMAL PROPERTIES OF A NEW CHOLIC ACIDCONTAINING COPOLYMER

A new copolymer was synthesized by free radical polymerization in solution from methyl 3α-methylacryloyl-7α, 12α-dihydroxy-5β-cholan-24-oate (MACAME) and maleic anhydride (MAN). The copolymer was characterized by FT-IR and functional group analysis. The reactivity ratios of the two monomers were estimated [r_1 = 11.6 (MACAME), r_2 = 0.01(MAN)] by conducting a series of copolymerizations with a variety of monomer feed compositions and analyzing thecopolymer composition. Thermogravimetric and differential scanning calorimetric analyses of the samples indicate that thecopolymer possesses good thermal stability. The temperature at which the copolymer samples experienced a 10% weight loss(T_(WL)) is over 287℃, and the T_g ranged from 174 to 185℃ for the copolymers.     

Copolymerisation of maleic anhydride with electron-acceptor monomers

Copolymerisation of maleic anhydride with tert.-butyl methacrylate and trimethylsilyl methacrylate was studied. Both monomers form random copolymers with maleic anhydride and in both cases the acceptor monomer is incorporated preferentially into the copolymer. Maleic anhydride which does not homopolymerise has reactivity ratios of approximately zero. The esters have reactivity ratios of 12.8 for trimethylsilyl methacrylate and 2.95 for tert.-butyl methacrylate. Thermal behavior and molar masses were investigated as a function of composition. Conditions for hydrolysis of the trimethylsilyl ester groups to give free acid groups have been established.     

Synthesis and characterization of cationic copolymers of butylacrylate and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride

Cationic copolymers of butylacrylate (BA) and [3‐(methacryloylamino)‐propyl]trimethylammonium chloride (MAPTAC) were synthesized by free‐radical‐solution polymerization in methanol and ethanol. An FT‐Raman Spectrometer and NMR were used to monitor the polymerization process. The copolymers were characterized by light scattering, NMR, DSC, and thermogravimetric analysis. It was found that random copolymers could be prepared, and the molar fractions of BA and cationic monomers in the copolymers were close to the feed ratios. The copolymer prepared in methanol had a higher molecular weight than that prepared in ethanol. As the cationic monomer content increased, the glass‐transition temperature (T_g) of the copolymer also increased, whereas the thermal stability decreased. The reactivity ratios for the monomers were evaluated. The copolymerization of BA (M₁) with MAPTAC (M₂) gave reactivity ratios such as r₁ = 0.92 and r₂ = 2.61 in ethanol as well as r₁ = 0.79 and r₂ = 0.90 in methanol. This study indicated that a random copolymer containing a hydrophobic monomer (BA) and a cationic hydrophilic monomer (MAPTAC) could be prepared in a proper polar solvent such as methanol or ethanol. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1031–1039, 2001