XPS studies of charge transfer interactions in some polyphenylacetylene-electron acceptor systems

X-ray photoelectron spectroscopy (XPS) studies have been performed on charge transfer complexes of trans-polyphenylacetylene (PPA). The acceptors used included halogens, such as I₂ and Br₂, and organic electron acceptors, such as 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), chloranil, fluoranil, and 7,7,8,8-tetracyano-p-quinodimethane (TCNQ). Incomplete and relatively weak charge transfer interactions were observed in most of the complexes. These help to account for the relatively low conductivity levels observed in most of the PPA complexes when compared with the corresponding complexes of other conjugated polymers. PPA has also been found to interact with molecular oxygen to some extent in solution. In complexes involving O₂, Br₂, and fluoranil, XPS data suggest that the charge transfer interaction may have proceeded further than the pure formation of molecular charge transfer complexes.     

Functional Group Modification and Bonding Characteristics of Ti3C2 MXene-Organic Composites from First-Principles Calculations

The unique physical structure and abundant surface functional groups of MXene make the grafted organic molecules exhibit specific electrical and optical properties. This work reports the results of first-principles calculations to investigate the composite systems formed by different organic molecular monomers, namely acrylic acid (AA), acrylamide (AM), 1-aziridineethanol (1-AD) and glucose, and Ti₃C₂ MXene saturated with different functional groups, namely −OH, −O and −F. The results show that the interaction between organic molecules and the MXene surface depends on the type of functional groups of the organic molecules, while the strength of the interaction is determined by the type of surface functional groups and the number of hydrogen bonds. The bare Ti₃C₂ and Ti₃C₂(OH)₂ can readily form strong chemical and hydrogen bonds with AA and AM molecules, leading to strong adsorption energy and a large amount of charge transfer, while the interaction between organic molecules and MXene saturated by −F or −O groups mainly exhibits physical interactions, accompanied by low adsorption energy and a small amount of charge transfer. This research provides theoretical guidance for the synthesis of high-performance MXene organic composite systems.     

Spectroscopic studies of charge transfer complexes of meso‐tetra‐p‐tolylporphyrin and its zinc complex with some aromatic nitro acceptors in different organic solvents

The charge transfer complex (CTC) formation of 5,10,15,20‐tetra(p‐tolyl)porphyrin (TTP) and zinc 5,10,15,20‐tetra(p‐tolyl)porphyrin with some aromatic nitro acceptors such as 2,4,6‐trinitrophenol (picric acid), 3,5‐dinitrosalicylic acid, 3,5‐dinitrobenzoic acid (DNB) and 2,4‐dinitrophenol (DNP) was studied spectrophotometrically in different organic solvents at different temperatures. The spectrophotometric titration, Job's and straight line methods indicated the formation of 1:1 CTCs. The values of the equilibrium constant (K_CT) and molar extinction coefficient (ε_CT) were calculated for each complex. The ionization potential of the donors and the dissociation energy of the charge transfer excited state for the CTC in different solvents was also determined and was found to be constant. The spectroscopic and thermodynamic properties were observed to be sensitive to the electron affinity of the acceptors and the nature of the solvent. No CT band was observed between Zn‐TTP as donor and DNP or DNB as acceptors in various organic solvents at different temperature. Bimolecular reactions between singlet excited TTP (¹TTP*) and the acceptors were investigated in solvents with various polarities. A new emission band was observed. The fluorescence intensity of the donor band decreased with increasing the concentration of the acceptor accompanied by an increase in the intensity of the new emission. The new emission of the CTCs can be interpreted as a CT excited complex (exciplex). Copyright © 2007 John Wiley & Sons, Ltd.     

Charge transfer in and conductivity of molecularly doped thiophene‐based copolymers

The electrical conductivity of organic semiconductors can be enhanced by orders of magnitude via doping with strong molecular electron acceptors or donors. Ground‐state integer charge transfer and charge‐transfer complex formation between organic semiconductors and molecular dopants have been suggested as the microscopic mechanisms causing these profound changes in electrical materials properties. Here, we study charge‐transfer interactions between the common molecular p‐dopant 2,3,5,6‐tetrafluoro‐7,7,8,8‐tetracyanoquinodimethane and a systematic series of thiophene‐based copolymers by a combination of spectroscopic techniques and electrical measurements. Subtle variations in chemical structure are seen to significantly impact the nature of the charge‐transfer species and the efficiency of the doping process, underlining the need for a more detailed understanding of the microscopic doping mechanism in organic semiconductors to reliably guide targeted chemical design. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 58–63     

STUDY ON THE PROTONATION MECHANISM OF 2,6-DIMETHYL NAPHTHALENE DICARBOXYLATE

By the study of absorption and fluorescence spectra and the lifetime of fluorescence at room and low temperatures of 2,6-dimethyl naphthalene dicarboxylate (DMN) in different concentrations of sulfuric acid, different interactions between molecules of DMN and sulfuric acid have been observed. These interactions have been revealed by the absorption spectra of charge transfer complex in the ground state, emission of exciplex, absorption spectra of hydrogen bonding interaction, absorption and emission spectra after proton transfer and different lifetimes before and after protonation. The interaction mechanism of DMN and sulfuric acid through first the CT complex and exciplex then hydrogen bonding and finally proton transfer is proposed.     

Increasing the Efficacy of Seproxetine as an Antidepressant Using Charge–Transfer Complexes

The charge transfer interactions between the seproxetine (SRX) donor and π-electron acceptors [picric acid (PA), dinitrobenzene (DNB), p-nitrobenzoic acid (p-NBA), 2,6-dichloroquinone-4-chloroimide (DCQ), 2,6-dibromoquinone-4-chloroimide (DBQ), and 7,7′,8,8′-tetracyanoquinodi methane (TCNQ)] were studied in a liquid medium, and the solid form was isolated and characterized. The spectrophotometric analysis confirmed that the charge–transfer interactions between the electrons of the donor and acceptors were 1:1 (SRX: π-acceptor). To study the comparative interactions between SRX and the other π-electron acceptors, molecular docking calculations were performed between SRX and the charge transfer (CT) complexes against three receptors (serotonin, dopamine, and TrkB kinase receptor). According to molecular docking, the CT complex [(SRX)(TCNQ)] binds with all three receptors more efficiently than SRX alone, and [(SRX)(TCNQ)]-dopamine (CTcD) has the highest binding energy value. The results of AutoDock Vina revealed that the molecular dynamics simulation of the 100 ns run revealed that both the SRX-dopamine and CTcD complexes had a stable conformation; however, the CTcD complex was more stable. The optimized structure of the CT complexes was obtained using density functional theory (B-3LYP/6-311G++) and was compared.     

Application of the pulse radiolysis technique to reactions of organic radical ions

The nanosecond pulse radiolysis technique has been applied to study the rate constants for charge transfer and substitution reactions of radical ions. Electron transfer from biphenyl anion to styrene derivatives shows a correlation with the reduction potential of the acceptors expected from the Marcus theory. The positive charge transfer from biphenyl cation to the same acceptors shows a much larger rate constant, suggesting a considerable shift of the free energy relationship to the positive side of G^o. The substitution reaction of fluorenone anion with organic halides shows an S_N2 character, while that of diethyl fumarate shows electron transfer nature. The dimerization of radical anions has been proven for benzophenone and fluorenone, when their lifetime of the parent anions are prolonged by countercations.     

Asymmetric Acceptor–Donor–Acceptor Polymers with Fast Charge Carrier Transfer for Solar Hydrogen Production

Construction of local donor–acceptor architecture is one of the valid means for facilitating the intramolecular charge transfer in organic semiconductors. To further accelerate the interface charge transfer, a ternary acceptor–donor–acceptor (A₁-D-A₂) molecular junction is established via gradient nitrogen substituting into the polymer skeleton. Accordingly, the exciton splitting and interface charge transfer could be promptly liberated because of the strong attracting ability of the two different electron acceptors. Both DFT calculations and photoluminescence spectra elucidate the swift charge transfer at the donor-acceptor interface. Consequently, the optimum polymer, N₃-CP, undergoes a remarkable photocatalytic property in terms of hydrogen production with AQY_{405 nm}=26.6 % by the rational design of asymmetric molecular junctions on organic semiconductors.     

Photophysics and Acid‐Base Chemistry of Re(CH3bpyCOOH)(CO)3X (X=Cl−, and Imidazole) Complexes

Rheniumtricarbonyl(4′‐methyl‐2,2′‐bipyridine‐4‐carboxylic acid)X (where X is Cl^? and imidazole) complexes have been prepared. These two complexes exhibit similar spectroscopic properties. The metal‐ to‐ligand charge‐transfer (MLCT) absorption and the corresponding emission are observed. This charge transfer band is highly solvent dependent. Due to the stronger electron‐withdrawing ability of the ‐COOH (in comparison to the ‐COO^? group), the MLCT band has red‐shifted during protonation. Emission quantum yields are dramatically reduced while life time remains similar upon protonation. These behaviors are typical in static quenching mechanism by protons. The ground state pK_a of Re(CO)₃ (CH₃bpyCOOH)Cl obtained from the pH titration curve of the complex absorption at 409 nm was 2.5.     

Highly Porous Zirconium Aryldiphosphonates and Their Conversion to Strong Bronsted Acids

Porous inorganic-organic hybrids have been prepared by the reaction of 4,4′-biphenylbis(phosphonic acid) with Zr(IV) in organic solvents. The resultant products consist of α-zirconium phosphate-type layers crosslinked by biphenyl pillars. By using an excess of Zr in the synthesis, surface areas of ∼400 m²/g have been obtained and the pores can be controlled to be the micro-type with diameters of 10-20 Å and a relatively narrow pore size distribution. The aromatic rings are readily sulfonated by SO₃ under pressure to produce very strong Bronsted acid catalysts. An NMR procedure, utilizing the shift of the carbonyl carbon of acetone-2-¹³C sorbed onto the sulfonated products, indicated an acid strength for the Bronsted acid sites equal to that of 100% sulfuric acid. Unpillared Zr(O₃PC₆H₄SO₃H)₂ has a somewhat lower acid strength, but still has a higher acid strength than zeolites HX and HY. The particles of this layered acid exfoliate in water and light-scattering data show that they are in 5 nm size range. They also exhibit high proton conductivity as solid membranes. These sulfonated materials have a potential as strong acid catalysts for a variety of reactions at a low temperature.     

Carbon nanotubes with covalently linked porphyrin antennae: photoinduced electron transfer

Single- and multiwalled carbon nanotubes have been covalently functionalized with free-base porphyrin. The quantity of porphyrin linked to the surface was determined from thermogravimetric and UV-vis analysis. A reversible protonation equilibrium between the attached porphyrin and the residual acid groups of the carbon nanotubes has been identified. Steady-state fluorescence emission spectrum of the solutions of porphyrin-linked carbon nanotubes shows that the porphyrins act as energy absorbing and electron transferring antennae, and the carbon nanotubes act as efficient electron acceptors. The porphyrin-linked carbon nanotubes show 95-100% emission quenching, indicating a fast photoinduced electron transfer.     

Effect of solution chemistry on the surface charge of polymeric reverse osmosis and nanofiltration membranes

A streaming potential analyzer has been used to investigate the effect of solution chemistry on the surface charge of four commercial reverse osmosis and nanofiltration membranes. Zeta potentials of these membranes were analyzed for aqueous solutions of various chemical compositions over a pH range of 2 to 9. In the presence of an indifferent electrolyte (NaCl), the isoelectric points of these membranes range from 3.0 to 5.2. The curves of zeta potential versus solution pH for all membranes display a shape characteristic of amphoteric surfaces with acidic and basic functional groups. Results with salts containing divalent ions (CaCl₂, Na₂SO₄, and MgSO₄) indicate that divalent cations more readily adsorb to the membrane surface than divalent anions, especially in the higher pH range. Three sources of humic acid, Suwannee River humic acid, peat humic acid, and Aldrich humic acid, were used to investigate the effect of dissolved natural organic matter on membrane surface charge. Other solution chemistries involved in this investigation include an anionic surfactant (sodium dodecyl sulfate) and a cationic surfactant (dodecyltrimethylammonium bromide). Results show that humic substances and surfactants readily adsorb to the membrane surface and markedly influence the membrane surface charge.     

ELECTROCHEMICAL PROPERTIES OF ASPHALTENE PARTICLES IN AQUEOUS SOLUTIONS

The electrical properties of colloidal asphaltene/water solution interface were determined by carrying out the potentiometric titration and electrokinetic measurements. Asphaltenes in aqueous solutions exhibit typical organic colloid properties i.e. surface charge and electrophoretic mobility. It was considered that the surface charge at the asphaltene particles is a result of protonation and dissociation reactions of surface functional groups. On the base of the surface charge density data vs. pH the surface reaction constants were calculated by numerical method. The agreement of these values with calculated ones, on the base of ζ potential data, is noticeable.

The characteristic feature of the investigated systems is the maximum, appearing on the curve ζ potential vs. electrolyte concentration. This behaviour is explained by _”hair layer ” structure of the asphaltene surface     

Fullerene-Perylenediimide (C60-PDI) Based Systems: An Overview and Synthesis of a Versatile Platform for Their Anchor Engineering

An overview of the different covalent bonding synthetic strategies of two electron acceptors leading to fullerene-perylenediimide (C₆₀-PDI)-based systems, essentially dyads and triads, is presented, as well as their more important applications. To go further in the development of such electron and photoactive assemblies, an original aromatic platform 5-benzyloxy-3-formylbenzoic acid was synthesized to graft both the PDI dye and the fullerene C₆₀. This new C₆₀-PDI dyad exhibits a free anchoring phenolic function that could be used to attach a third electro- and photoactive unit to study cascade electron and/or energy transfer processes or to obtain unprecedented side-chain polymers in which the C₆₀-PDI dyads are attached as pendant moieties onto the main polymer chain. This C₆₀-PDI dyad was fully characterized, and cyclic voltammetry showed the concomitant reduction process onto both C₆₀ and PDI moieties at identical potential. A quasi-quantitative quenching of fluorescence was demonstrated in this C₆₀-PDI dyad, and an intramolecular energy transfer was suggested between these two units. After deprotection of the benzyloxy group, the free hydroxyl functional group of the platform was used as an anchor to reach a new side-chain methyl methacrylate-based polymer in which the PDI-C₆₀ dyad units are located as pendants of the main polymer chain. Such polymer which associates two complementary acceptors could find interesting applications in optoelectronics and in particular in organic solar cells.     

Triplet Acceptors with a D‐A Structure and Twisted Conformation for Efficient Organic Solar Cells

Triplet acceptors have been developed to construct high‐performance organic solar cells (OSCs) as the long lifetime and diffusion range of triplet excitons may dissociate into free charges instead of net recombination when the energy levels of the lowest triplet state (T₁) are close to those of charge‐transfer states (³CT). The current triplet acceptors were designed by introducing heavy atoms to enhance the intersystem crossing, limiting their applications. Herein, two twisted acceptors without heavy atoms, analogues of Y6, constructed with large π‐conjugated core and D‐A structure, were confirmed to be triplet materials, leading to high‐performance OSCs. The mechanism of triplet excitons were investigated to show that the twisted and D‐A structures result in large spin–orbit coupling (SOC) and small energy gap between the singlet and triplet states, and thus efficient intersystem crossing. Moreover, the energy level of T₁ is close to ³CT, facilitating the split of triplet exciton to free charges.     

Vibrational fingerprint of the structural tuning in push-pull organic chromophores with quinoid or proaromatic spacers

The Raman spectra of a series of push-pull molecules containing probenzenoid or quinoid spacers which are substituted with 1,3-dithiol-2-ylidene as donor and dicyano-methylene or barbituric acid as acceptors have been analyzed. The experimental spectra have been assigned and interpreted according to density functional theory calculations. Correlations between the Raman spectra of the isolated spacers and of the substituted molecules have been done. Raman bands in the 1620-1560 cm-1 interval provide vibrational markers of the quinoid<-->aromatic structural evolution. This finding is supported by a careful inspection of geometrical parameters, namely, bond length alteration data and particular bond distances. As a result, the peak positions and relative intensities of these Raman features can be used to evaluate the benzenoid character of the spacer as a function of the donor/acceptor substitution pattern. This paper shows that Raman spectroscopy is a powerful spectroscopic tool for the analysis of the conjugational properties (i.e., intramolecular donor-->acceptor charge transfer) of new organic materials.     

Experimental and Computational Probes of the Nature of Halogen Bonding: Complexes of Bromine‐Containing Molecules with Bromide Anions

The nature of halogen bonding is examined via experimental and computational characterizations of a series of associates between electrophilic bromocarbons R? Br (R? Br=CBr₃F, CBr₃NO₂, CBr₃COCBr₃, CBr₃CONH₂, CBr₃CN, etc.) and bromide anions. The [R? Br, Br^?] complexes show intense absorption bands in the 200–350 nm range which follow the same Mulliken correlation as those observed for the charge‐transfer associates of bromide anions with common organic π‐acceptors. For a wide range of the associates, intermolecular R? Br???Br^? separations decrease and intramolecular C? Br bond lengths increase proportionally to the Br^?→R? Br charge transfer; and the energies of R? Br???Br^? bonds are correlated with the linear combination of orbital (charge‐transfer) and electrostatic interactions. On the whole, spectral, structural and thermodynamic characteristics of the [R? Br, Br^?] complexes indicate that besides electrostatics, the orbital (charge‐transfer) interactions play a vital role in the R? Br???Br^? halogen bonding. This indicates that in addition to controlling the geometries of supramolecular assemblies, halogen bonding leads to electronic coupling between interacting species, and thus affects reactivity of halogenated molecules, as well as conducting and magnetic properties of their solid‐state materials.     

Acid/base-regulated reversible electron transfer disproportionation of N–N linked bicarbazole and biacridine derivatives

Regulation of electron transfer on organic substances by external stimuli is a fundamental issue in science and technology, which affects organic materials, chemical synthesis, and biological metabolism. Nevertheless, acid/base-responsive organic materials that exhibit reversible electron transfer have not been well studied and developed, owing to the difficulty in inventing a mechanism to associate acid/base stimuli and electron transfer. We discovered a new phenomenon in which N–N linked bicarbazole (BC) and tetramethylbiacridine (TBA) derivatives undergo electron transfer disproportionation by acid stimulus, forming their stable radical cations and reduced species. The reaction occurs through a biradical intermediate generated by the acid-triggered N–N bond cleavage reaction of BC or TBA, which acts as a two electron acceptor to undergo electron transfer reactions with two equivalents of BC or TBA. In addition, in the case of TBA the disproportionation reaction is highly reversible through neutralization with NEt₃, which recovers TBA through back electron transfer and N–N bond formation reactions. This highly reversible electron transfer reaction is possible due to the association between the acid stimulus and electron transfer via the acid-regulated N–N bond cleavage/formation reactions which provide an efficient switching mechanism, the ability of the organic molecules to act as multi-electron donors and acceptors, the extraordinary stability of the radical species, the highly selective reactivity, and the balance of the redox potentials. This discovery provides new design concepts for acid/base-regulated organic electron transfer systems, chemical reagents, or organic materials.     

NEW PHOTOSYSTEM I ELECTRON ACCEPTORS: IMPROVEMENT OF HYDROGEN PHOTOPRODUCTION BY CHLOROPLASTS *

Abstract Four novel electron carriers (two zwitterionic bipyridyls, dicarboxyl colbalticinium and sodium metatungstate), which are negatively charged in their reduced form, have been tested as photo-system I acceptors and as mediators of H₂ evolution. Measurements of O₂ uptake, anaerobic photoreduction rates and stationary concentrations of reduced species under continuous illumination indicate that Coulombic interactions control the electron transfer between the photosynthetic membrane and the mediators. Both rates of forward transfer and back reaction (electron cycling) seem to depend on the charge of the electron carrier. The low concentration of anionic species in the diffuse layer associated with the membrane could explain our results. Hydrogen evolution rates obtained with these four mediators used as electron relays between the photosynthetic membrane and colloidal platinum catalyst are higher than with methylviologen. This improvement of the conversion efficiency parallels the high steady state accumulation of reduced carriers favoured by their negative charge. It is also shown that these synthetic mediators, except metatungstate, are able to evolve hydrogen with an hydrogenase isolated from Desulfovibrio desulfuricans.     

Anomalous Charge Transfer from Organic Ligands to Metal Halides in Zero-Dimensional [(C6H5)4P]2SbCl5 Enabled by Pressure-Induced Lone Pair-π Interaction

Low-dimensional (low-D) organic metal halide hybrids (OMHHs) have emerged as fascinating candidates for optoelectronics due to their integrated properties from both organic and inorganic components. However, for most of low-D OMHHs, especially the zero-D (0D) compounds, the inferior electronic coupling between organic ligands and inorganic metal halides prevents efficient charge transfer at the hybrid interfaces and thus limits their further tunability of optical and electronic properties. Here, using pressure to regulate the interfacial interactions, efficient charge transfer from organic ligands to metal halides is achieved, which leads to a near-unity photoluminescence quantum yield (PLQY) at around 6.0 GPa in a 0D OMHH, [(C₆H₅)₄P]₂SbCl₅. In situ experimental characterizations and theoretical simulations reveal that the pressure-induced electronic coupling between the lone-pair electrons of Sb³⁺ and the π electrons of benzene ring (lp-π interaction) serves as an unexpected “bridge” for the charge transfer. Our work opens a versatile strategy for the new materials design by manipulating the lp-π interactions in organic–inorganic hybrid systems.