Third-order Nonlinear Optical Properties of Octa-substituted Metal-free Phthalocyanine Thin Films

Third-order nonlinear optical susceptibility, χ⁽³⁾ of symmetrically octa-substituted metal-free phthalocyanine thin films measured by the third-harmonic generation technique are reported. The metal-free phthalocyanine has been found to show a χ⁽³⁾ (−3ω; ω,ω, ω) value as large as 7.73×10⁻¹² esu at 1.80 μm. The figure of merit, χ⁽³⁾/α, was estimated to be 4.17×10¹⁷ esu cm at 1.05 μm and 6.97×10¹⁶ esu cm at 1.65 μm. Both linear and third-order optical properties of liquid-crystalline metal-free phthalocyanines are discussed     

New liquid crystal polyethers and polyesters based on diphenylbutadiene mesogens

New liquid-crystalline (LC) polymers and small molecules have been synthesized based on the 1,4-diphenylbutadiene mesogen, a chromophore with χ⁽³⁾ nonlinear optical properties. Polyethers were formed by phase-transfer reaction, and polyesters were prepared by Schotten-Bauman polymerization from these 4,4'-bisphenolic mesogenic structures. Liquid crystallinity was examined using differential scanning calorimetry (DSC) and optical microscopy. Most of the model compounds were found to be nematic. All mesomorphic polymers were nematic and displayed LC ranges of up to 50°C as well as a wide diversity of melting points. The melting points varied with the flexible (methylene) spacer length and were strongly dependent upon the presence of substituents in the mesogenic core. Crosslinking and cis-trans isomerization were observed under the influence of heat and ultraviolet radiation. © 1992 John Wiley & Sons, Inc.     

Synthesis of third‐order non‐linear optical polymers based on conjugated poly(heteroarylene methines)

A series of 10 new poly(heteroarylene methylenes) containing one pyrrole or thiophene ring alternating with a carbon atom in the main chain were synthesized and characterized. The polymers which were synthesized in the air were found to be partially dehydrogenated by the oxygen, that is, the bridge carbon atoms between pyrrole or thiophene rings were partially sp³ atoms and partially sp² atoms. However the polymers which were synthesized in the flowing nitrogen atmosphere were found to be deoxidized, that is the bridge atoms were sp³ atoms. The deoxidized polymers could be oxidatively dehydrogenated with tetrchlorobenzoquinone. These polymers are useful model systems to investigate the effect of conjugation length on the electronic and optical properties of conjugated polymers. Third‐order optical non‐linearities of the reulting polymers were studied by z‐scan techniques. The results show that the reulting polymers exhibited large third‐order optical non‐linear susceptibilities as large as 10^?8 esu. Copyright © 2004 John Wiley & Sons, Ltd.     

LIQUID CRYSTALLINE POLYMERS. 3. SYNTHESIS AND LIQUID CRYSTAL PROPERTIES OF THERMOTROPIC POLY(ARYLIDENE-ETHER)S AND COPOLYMERS CONTAINING CYCLOALKANONE MOIETY IN THE POLYMER BACKBONE

Two novel series of poly(arylidene-ether)s and copoly(aryl-idene-ether)s were synthesized by polycondensation of 4,4^′-diformyl-α,ω-diphenoxyalkane and 4,4′-diformyl-2,2′-dimeth-oxy-α,ω-diphenoxyalkane with cyclohexanone and/or cyclo-pentanone. The inherent viscosity of the polymers and copolymers thus prepared were in the range of 0.42–1.27 dL/g. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy using a heated stage, and thermogravimetric analyses. Almost all the polymers and copolymers exhibited thermotropic liquid crystalline properties. In most cases, the mesophase extends up to 310°C, where thermal decomposition prevents further observation. Methoxy substituents, on the benzene ring of these polymers, lower the transition temperature significantly. The morphology of polymer IX_f was examined by scanning electronic microscope.     

Synthesis and mesogenic properties of four series of polyesters derived from dicarboxylic and dihydroxylic aromatic monomers

Some members of four series of polyesters were synthesized by the direct polycondensation of two types of dicarboxylic acids (4,4′-dicarboxy-α,ω-diphenoxyalkanes and 4,4′-dicarboxy-α,ω-dibenzoyloxyalkanes) with two types of bisphenols (4,4′-dihydroxy-α,ω-diphenoxyalkanes and 4,4′-dihydroxy-α,ω-dibenzoyloxyalkanes) using tosyl chloride in pyridine in the presence of N, N-dimethylformamide. The ¹H-NMR spectra of the polymers synthesized showed that these polymers have an ordenated structure. The mesogenic properties of these polymers were studied by optical microscopy and differential scanning calorimetry. Many of the polymers show nematic mesomorphism.     

Study of Linear and Nonlinear Optical Properties of Four Derivatives of Substituted Aryl Hydrazones of 1,8‐Naphthalimide

Four 1,8‐naphthalimide hydrazone molecules with different electron‐donating groups have been applied in the study of linear and nonlinear optical (NLO) properties. These compounds showed strong green emission in solution. Their NLO properties such as two‐photon absorption (TPA) behavior with femtosecond laser pulses ca. 800 nm and excited‐state absorption (ESA) behavior with nanosecond laser pulses at 532 nm were investigated. Compound 4 presented the largest two‐photon cross section (550 GM) among them due to two factors: the conjugated length of compound 4 is the longest and the electron‐donating ability of compound 4 is the strongest. Different from TPA behavior, compound 2 showed the best nonlinear absorption properties at 532 nm and its nonlinear absorption coefficient and third‐order nonlinear optical susceptibilities χ ⁽³⁾ were up to 1.41×10^?10 MKS and 4.65×10^?12 esu, respectively. Through the modification of the structure, the nonlinear optical properties of these compounds at different wavelengths (532 and 800 nm) were well tuned. The great broad‐band nonlinear optical properties indicate hydrazones are good candidates for organic nonlinear optical absorption materials.     

Second harmonic generation and optical anisotropy of a spin-cast polymer film

The nonlinear susceptibilities (χ⁽²⁾₃₃, χ⁽²⁾₃₁), and the refractive index anisotropy, of a main chain accordion polymer, BCSC (see the text for the complete chemical formula), have been measured by the techniques of second harmonic generation (SHG) and waveguiding. A large birefringence, which is induced in the BCSC film by the spin-coating process, is almost removed by electric field poling. Our results demonstrate the fundamental difference between the birefringence associated with quadrupolar orientational order and the dipolar order associated with SHG. © 1993 John Wiley & Sons, Inc.     

Enhanced third‐order nonlinear optical properties determined in thin films using the Z‐scan technique: bis(μ‐4,4′‐oxydibenzoato)bis[(4′‐phenyl‐2,2′:6′,2′′‐terpyridine)cobalt(II)]

π‐Conjugated organic materials exhibit high and tunable nonlinear optical (NLO) properties, and fast response times. 4′‐Phenyl‐2,2′:6′,2′′‐terpyridine (PTP) is an important N‐heterocyclic ligand involving π‐conjugated systems, however, studies concerning the third‐order NLO properties of terpyridine transition metal complexes are limited. The title binuclear terpyridine Co^II complex, bis(μ‐4,4′‐oxydibenzoato)‐κ³O,O′:O′′;κ³O′′:O,O′‐bis[(4′‐phenyl‐2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)cobalt(II)], [Co₂(C₁₄H₈O₅)₂(C₂₁H₁₅N₃)₂], (1), has been synthesized under hydrothermal conditions. In the crystal structure, each Co^II cation is surrounded by three N atoms of a PTP ligand and three O atoms, two from a bidentate and one from a symmetry‐related monodentate 4,4′‐oxydibenzoate (ODA²⁻) ligand, completing a distorted octahedral coordination geometry. Neighbouring [Co(PTP)]²⁺ units are bridged by ODA²⁻ ligands to form a ring‐like structure. The third‐order nonlinear optical (NLO) properties of (1) and PTP were determined in thin films using the Z‐scan technique. The title compound shows a strong third‐order NLO saturable absorption (SA), while PTP exhibits a third‐order NLO reverse saturable absorption (RSA). The absorptive coefficient β of (1) is −37.3 × 10⁻⁷ m W⁻¹, which is larger than that (8.96 × 10⁻⁷ m W⁻¹) of PTP. The third‐order NLO susceptibility χ⁽³⁾ values are calculated as 6.01 × 10⁻⁸ e.s.u. for (1) and 1.44 × 10⁻⁸ e.s.u. for PTP.     

Nonlinear optical properties of poly(fluorophenyl-diacetylene) evaporated films

A new insoluble polydiacetylene with fluoro-aromatic units directly bound to the π-conjugated main backbone has been obtained via solid-state polymerization induced by UV light, daylight and γ-rays. Third-order harmonic generation has been measured on poly(fluorophenyl-diacetylene) films prepared by the vacuum deposition method. The third-order nonlinear optical susceptibility of this poly(fluorophenyl-diacetylene) film was evaluated as χ⁽³⁾ = 7.3 × 10⁻¹¹ esu.     

Preparation and Optical Limiting Properties of Polyurethane Containing Long Conjugated Chromophores

Two functional polyurethanes (P1 and P2) bearing a large π electron conjugated chromophoric pendant were synthesized and characterized by FT‐IR, ¹H‐NMR and UV‐Vis absorption spectra. Their optical limiting properties were evaluated. The results show that P1 and P2 show novel optical limiting properties, which are assigned to a long π electron conjugated chromophoric pendant. It was found that their optical limiting properties were affected simultaneously by solution concentration and P2 displays a better optical limiting property than P1 at the same solution transmittance, although that P1 has larger χ⁽³⁾ (4.28×10^?11 esu) than P2 (0.87×10^?11 esu), and their optical limiting mechanism is investigated.     

Synthesis and optical properties of poly(aryl ether ketone)s incorporating porphyrins in the backbones

A series of novel soluble poly(aryl ether ketone)s (PAEKs) based on 5,10‐bis(4‐hydroxyphenyl)?15,20‐diphenylporphyrin (cis‐DHTPP), 4,4′‐(hexafluoroisopropylidene) diphenol (6FBPA) and 4,4′‐difluorobenzophenone (DFB) were synthesized and characterized by FT‐IR, ¹H‐NMR, UV–vis and fluorescence spectroscopies. The intrinsic photophysical properties of porphyrins were preserved because of the absence of photoinduced electron transfer in the polymer chains. Investigation of the copolymers thermal properties indicated that these polymers had high glass transition temperatures and excellent thermal stabilities. The results of Z‐scan and optical limiting measurements manifested that incorporation of the porphyrin chromophore into the main chain engendered the novel PAEKs with superior nonlinear optical properties and optical limiting function, which could be effectively tuned by varying the molar ratio of porphyrin monomers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1282–1290     

Ab-initio study of the structural, linear and nonlinear optical properties of CdAl2Se4 defect-chalcopyrite

The complex density functional theory (DFT) calculations of structural, electronic, linear and nonlinear optical properties for the defect chalcopyrite CdAl₂Se₄ compound have been reported using the full potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN2k code. We employed the Wu and Cohen generalized gradient approximation (GGA-WC), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for band structure, density of states and the spectral features of the linear and nonlinear optical properties. This compound has a wide direct energy band gap of about 2.927 eV with both the valence band maximum and conduction band minimum located at the center of the Brillouin zone. The ground state quantities such as lattice parameters (a, c, x, y and z), bulk modulus B and its pressure derivative B′ are evaluated. We have calculated the frequency-dependent complex ε(ω), its zero-frequency limit ε₁(0), refractive index n(ω), birefringence Δn(ω), the reflectivity R(ω) and electron energy loss function L(ω). Calculations are reported for the frequency-dependent complex second-order nonlinear optical susceptibilities. We find opposite signs of the contributions of the 2ω and 1ω inter/intra-band to the imaginary part for the dominant component through the wide optical frequency range.     

Synthesis and properties of a soluble and widely conjugated polyacetylene with anthryl pendant

The metathesis polymerization of an anthrylacetylene bearing an alkyl ester group, 9‐(10‐hexoxycarbonyl)anthrylacetylene ( 1 ), was conducted with various transition‐metal catalysts. A completely soluble black polymer was obtained from 1 in a good yield when W‐based catalysts were employed. The polymerization at a high monomer concentration (1 M) and a high temperature (80 °C) led to the formation of poly( 1 ) with a weight‐average molecular weight of 297 × 10³ in an 80% yield. The use of cocatalysts unexpectedly decreased both the yield and molecular weight of poly( 1 ). Rh‐catalyzed and Mo‐catalyzed polymerizations, however, resulted in poor yields of the polymer. The ultraviolet–visible spectrum of poly( 1 ) showed a significantly redshifted absorption (λ_max = 571) with a cutoff at 780 nm, which verified the very high order of conjugation of the main chain. Poly( 1 ) exhibited the largest third‐order nonlinear optical susceptibility [χ⁽³⁾ (−ω; ω, 0, 0) = − 1.9 × 10⁻¹⁰ esu] among the polymers from the monosubstituted polyacetylenes synthesized so far. The electrical conductivity of poly( 1 ) in an I₂‐doped state was 8.77 × 10⁻⁴ at 293 K. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4717–4723, 2000     

Preparation and nonlinear optical properties of Au nanoparticles doped TiO2 thin films

Nano-sized noble metal nanoparticles doped dielectric composite films with large third-order nonlinear susceptibility due to the confinement and the enhancement of local field were considered to be applied for optical information processing devices, such as optical switch or all optical logical gates. In this paper, sol–gel titania thin films doped with gold nanoparticles (AuNPs, ~10 nm in average size) were prepared. AuNPs were firstly synthesized from HAuCl₄ in aqueous solution at ~60 °C, using trisodium citrate as the reducing agent, polyvinylpyrrolidone as the stable agent; then the particle size and optical absorption spectra of the AuNPs in aqueous solutions were characterized by transmitting electron microscopy and UV–Vis–NIR spectrometry. Sol–gel 2AuNPs–100TiO₂ (in %mol) thin films (5 layers, ~1 μm in thickness) were deposited on silica glass slides by multilayer dip-coating. After heat-treated at 300–1,000 °C in air, the AuNPs–TiO₂ thin films were investigated by X-ray diffraction, scanning electron microscopy and atomic force microscopy. The nonlinear optical properties of the AuNPs–TiO₂ thin films were measured with the Z-scan technique, using a femtosecond laser (200 fs) at the wavelength of 800 nm. The third-order nonlinear refractive index and nonlinear absorption coefficient of 2AuNPs–100TiO₂ films were at the order of 10^?12 cm²/W, and the order of 10^?6 cm/W, respectively, and the third-order optical nonlinear susceptibility χ⁽³⁾ was ~6.88 × 10^?10 esu.     

Efficient tuning nonlinear optical properties: Synthesis and characterization of a series of novel poly(aryleneethynylene)s co‐containing BODIPY

A series of novel conjugated poly(aryleneethynylene)s (PAEs) co‐containing BODIPY have been synthesized and characterized, and their third‐order nonlinear optical properties were studied using the Z‐scan technique. Interestingly, by introducing the BODIPY skeleton into the PAE backbone, the polymers showed that their nonlinear optical properties were dependent on the BODIPY component. From poly‐4 to poly‐1, the third‐order nonlinear optical properties of the polymers enhanced regularly with the increase of the BODIPY component of the copolymers, indicating that the BODIPY component played decisive roles in enhancing the nonlinear optical properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7401–7410, 2008     

Liquid crystalline polymers XII. Main chain thermotropic poly(arylidene-ether)s containing 4-tertiary-butyl-cyclohexanone moiety linked with polymethylene spacers

A new homologous series of thermally stable thermotropic liquid crystalline poly(arylidene-ether)s based on 4-tertiary-butyl-cyclohexanone moiety was synthesised by solution polycondensation of 4,4′-diformyl-α,ω-diphenoxyalkanes, I_a–f, or 4,4′-diformyl-2,2′-dimethoxy-α,ω-diphenoxyalkanes, II_a–f, with the 4-tertiary-butyl-cyclohexanone monomer. A model compound III was synthesised from the monomer with benzaldehyde and characterised by elemental and spectral analyses. The inherent viscosities of the resulting polymers were in the range of 0.18–0.92 dL/g. The mesomorphic properties of these polymers were studied as a function of the diphenoxyalkane space length. Their thermotropic liquid crystalline properties were examined by differential scanning calorimetry (DSC) and optical polarising microscopy and demonstrated that the resulting polymers form nematic mesophases over wide temperature ranges. The thermal properties of those polymers were evaluated by thermogravimetric analysis and DSC measurements and correlated to their structural units. X-ray analysis showed that polymers having some degree of crystallinity in the region 2θ = 5–60°. In addition, the morphological properties of selected examples were tested by scanning electron microscopy.     

Synthesis and properties of poly(1‐naphthylacetylene) and poly(9‐anthrylacetylene)

Polymerizations of 1‐naphthylacetylene (1‐NA) and 9‐anthrylacetylene (9‐AA) by various transition metal catalysts were studied, and properties of the polymers were clarified. 1‐NA polymerized with WCl₆‐based catalysts to offer dark purple polymers in good yield. Especially, a binary catalyst composed of WCl₆ and Ph₃Bi gave a polymer with high molecular weight (M_w = 140×10³) and sufficient solubility in common solvents. The use of Mo and Rh catalysts, in contrast, resulted in the formation of insoluble red poly(1‐NA)s. 9‐AA gave insoluble polymers by both WCl₆‐ and MoCl₅‐based catalysts in moderate to good yields. Copolymerization of 9‐AA with 1‐NA by WCl₆–Ph₃Bi provided a soluble copolymer which exhibited the largest third‐order nonlinear optical susceptibilities (χ⁽³⁾(−3ω; ω, ω, ω) = 40×10⁻¹²) among all the substituted polyacetylenes synthesized so far. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 277–282, 1999     

取代基结构对聚[(3-烷基)噻吩-2,5]-取代苯甲烯衍生物三阶非线性光学性能的影响

采用3-烷基噻吩与对硝基苯甲醛和对二甲氨基苯甲醛的聚合反应得到了5种聚(3-烷基)噻吩取代苯甲烯衍生物:聚(3-丁基)噻吩对硝基苯甲烯(PBTNBQ)、聚(3-己基)噻吩对硝基苯甲烯(PHTNBQ)、聚(3-丁基)噻吩对二甲氨基苯甲烯(PBTDMABQ)、聚(3-己基)噻吩对二甲氨基苯甲烯(PHTDMABQ)和聚(3-辛基)噻吩对二甲氨基苯甲烯(POTDMABQ).计算其光学禁带宽度分别为PBTNBQ(1.82eV),PHTNBQ(1.85eV),PBTDMABQ(1.71eV),PHTDMABQ(1.78eV)和POTDMABQ(1.67eV).利用简并四波混频技术测量了5种聚合物薄膜的三阶非线性极化率,分别为1.74×10^-8,1.82×10^-8,5.62×10^-9,8.64×10^-9和1.22×10^-8esu,均具有较大的三阶非线性光学性能.针对取代基结构对聚(3-烷基)噻吩取代苯甲烯衍生物的三阶非线性光学性能的影响从分子内极化程度和主链电子的离域程度两个方面进行了讨论.     

The second and third order non-linear optical properties of liquid crystalline polymers

Abstract

The second and third order non-linear optical susceptibilities of several donoracceptor substituted side chain polymers, some of which exhibit mesophases, will be reported. The susceptibilities were measured by harmonic generation from thin films, typically 0·5 μm thick, at a fundamental wavelength of 1064 nm and 1579 nm. For second harmonic generation, the spin coated films were contact poled on a glass substrate with an interdigited electrode pattern. Typical values obtained were χ⁽²⁾ ₃₁ = 1 × 10^?9 esu and χ⁽²⁾ ₃₃ = 3 × 10^?9 esu, the largest value was χ⁽²⁾ ₃₃ = 6·3 × 10^?9 esu. The difficulty in deriving reliable second order structure-property relations because of the large effect which the contact poling process has on the non-linear optical susceptibility of the films will be highlighted. The highest χ⁽³⁾ value of 5·8 × 10^?12 esu obtained from an amorphous film of a polymer with an asymmetrically substituted azo side group is comparable with the susceptibility of more typical third order non-linear materials such as the main chain polymers polyphenylacetylene and poly-p-phenylenebenzobisthiazole.