Mass spectrometric characterization of telechelic prepolymers and addition polymers of DGEBA–aliphatic amines

Plasma desorption (PD) mass spectra of high molecular weight addition polymers of 2.2-bis-[4-(2.3-epoxypropoxy)phenyl]propane (DGEBA) and benzylamine show protonated molecular ions of the intact polymers and oligomer molecules. In the spectrum of a DGEBA/N,N′-dibenzyl-5-oxanonanediamine-1.9 addition polymer only fragments of the oligomers and a cyclic oligomer are observed. In both polymer spectra there is no indication for side reactions during the addition polymerization such as ether formation. Fast-atom bombardment (FAB) spectra of telechelic prepolymers having amino end groups show the regular oligomers with increasing degree of polymerization and the expected fragmentation products. Only prepolymers with epoxide end groups contain the regular prepolymers as well as side reaction products which are formed by reactions of the telechelics and DGEBA or by reaction of themselves. © 1996 John Wiley & Sons, Inc.     

P and H NMR studies of the transesterification polymerization of polyphosphonate oligomers

Polymeric phosphonate esters are an interesting class of organophosphorus polymers because both the polymer backbone and phosphorus substituents can be modified. These polymers have been prepared by ring-opening polymerizations of cyclic phosphites, stoichiometric polycondensations of dimethyl phosphonate with diols in conjunction with diazomethane treatment and by transesterification of polyphosphonate oligomers. Our initial attempts to prepare high molecular weight polymeric phosphonate esters by the transesterification methods were unsuccessful. Results indicate that the reactions of dimethyl phosphonate with diols to form polyphosphonate oligomers with only methyl phosphonate end groups are plagued by a serious side reaction that forms phosphonic acid end groups. These end groups do not participate in the transesterification reaction and limit the molecular weights of the polymers that can be obtained. The phosphonic acid end groups can be converted into reactive methyl phosphonate end groups by treatment with diazomethane, however diazomethane is explosive and the polymerization is slow. An alternative route for the production of high molecular weight polymers is the transesterification of the 1,12-bis(methyl phosphonato)dodecane, formed by the reaction of excess dimethyl phosphonate and 1,12-dodecanediol, with a Na₂CO₃ promoter. This allows polymers with molecular weights of up to 4.5×10⁴ to be prepared, and no phosphonic acid end groups are observed in these polymers. Thermal analyses of the poly(1,12-dodecamethylene phosphonate) have shown that this polymer has reasonable thermal stability (onset of thermal decomposition at 273 °C). This polymer also undergoes a cold crystallization process at 15 °C similar to that which has been observed in some polyesters, polyamides and elastomers.     

Synthesis and Characterization of Polymethylmethacrylate by Using Glow Discharge Electrolysis Plasma

An approach for polymerization to produce polymethylmethacrylate (PMMA) was developed, in which the reaction was initiated by the glow discharge electrolysis (GDE) rather than chemical initiators. The highest number-average molecular weight (M _n) and the lowest polydispersity index (PDI) of the resulting polymer were 1.12 × 10⁶ g/mol and 1.21, respectively. The following parameters such as the applied voltage, discharge time, the content of methylmethacrylate (MMA), the amount of a suspension stabilizer (polyvinyl alcohol), polymerization temperature and time were examined in detail, which could affect the conversion, molecular weight and polydispersity index. The M _n and PDI of polymer can be monitored by changing the discharge parameters and polymerization conditions. PMMA was characterized by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FT-IR), cold field emission scanning electron microscopy (FESEM), nuclear magnetic resonance (NMR) and thermogravimetric analysis (TGA). Results indicate that using the GDE technique to initiate the polymerization reaction is successful, because the product obtained has the same properties with one obtained by chemical method, for example, in chemical structure, tacticity and thermal stability. Moreover, the polymer particles for the former are smaller than the latter. The kinetic observation was that the polymerization of MMA initiated by the GDE plasma obeys the first order of reaction with an obvious induction period.     

Atom transfer radical polymerization synthesis and photoresponsive solution behavior of spiropyran end‐functionalized polymers as simplistic molecular probes

Poly(methyl methacrylate)s (PMMAs) of two different molecular weights having a single photochromic benzospiropyran (BSP) end‐group were synthesized by atom transfer radical polymerization (ATRP). Polymer characterization by ¹H NMR and matrix‐assisted laser desorption/ionitiation time of flight‐mass spectroscopy confirms that using an ATRP initiator equipped with BSP, a near quantitative functionalization of the PMMA with the BSP was achieved. Both polymers exhibit photochroism characterized by the UV‐induced transition from BSP to benzomerocyanine (BMC) in acetonitrile. However, a strong molecular weight dependence of the thermal relaxation kinetic of the BMC was found with a significantly faster temperature‐dependent transition for the higher molecular weight polymer. Thermodynamic analysis of the process revealed a higher gain in the entropy of activation ΔS^± for the transition process in the higher molecular weight polymer. This suggests an energetically unfavorable nonpolar environment of the BMC group in the higher molecular weight polymers, although a higher solvation of the BMC in the lower molecular weight polymer contributes to its stabilization. The ability of the BMC polymer end‐groups to organize was shown in metal ion‐binding experiments forming bivalently linked complexes with Co ions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

高分子量二氧化碳-环氧丙烷共聚物的合成条件研究

利用新型多配体负载戊二酸锌来催化二氧化碳和环氧丙烷合成高分子量聚碳酸(1,2-丙二醇).通过研究反应时间和反应压力对产率以及产物的结构和性能的影响来对反应条件进行了优化.结果表明在反应压力为5.2MPa,反应时间为40h时所得聚合物的数均分子量大于23×104,玻璃化转变温度达到38℃,拉伸强度达到31MPa.     

High performance thermosets from a curable Diels–Alder polymer possessing benzoxazine groups in the main chain

A high‐molecular‐weight polymer (PBz) possessing reactive benzoxazine groups in the main chain was prepared through the Diels–Alder reaction using bis(3‐furfuryl‐3,4‐dihydro‐2H‐1,3‐benzoxazinyl)isopropane (BPA‐FBz) and bismaleimide (BMI) as monomers. The chemical structure of PBz is characterized with FTIR and ¹H NMR. The polymer PBz was further thermally reacted with a high performance polymer (PBz‐R) through the ring‐opening addition reaction of benzoxazine groups and the addition reaction of maleimide groups. PBz‐R exhibit a high glass transition temperature of 242 °C, good thermal stability, high flame retardancy, high mechanical strength, and great flexibility. Another crosslinked polymer (PBz‐BR) curing from the mixture of BPA‐FBz and BMI was also prepared. The properties of PBz‐BR are also attractive but, however, not as good as what observed with PBz‐R. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6509–6517, 2008     

Synthesis and Characterization of Poly(allyl methacrylate) Obtained by Free Radical Initiator

Allyl methacrylate was polymerized in CCl₄ solution by α,α′‐azoisobutyronitrile at 50, 60, and 70°C. The kinetic curves were auto‐accelarated types at 60 and 70°C, but almost linear at 50°C. Arrhenius activation energy was 77.5 kJ/mol. The polymer was insoluble in common organic solvents. It was characterized by FT‐IR, NMR, DSC, TGA and XPS methods. About 98–99% of allyl side groups were remained as pendant even after completion of the polymerization. The spectroscopic and thermal results showed that polymerization is not a cyclopolymerization type, but may have end group cyclization. The high molecular weight is the main cause of a polymer being insoluble even in the early stage of the polymerization. Molecular weight of 1.1×10⁶ for a soluble polymer fraction was measured by light scattering method. The Tg of polymer was 94°C, and after curing at 150–200°C, increased to 211°C. The thermal pyrolysis of polymer at about 350°C gave an anhydride by linkage type degradation, and side group cyclization. The XPS analysis showed the presence of radical fragments of AIBN (initiator) and CCl₄ (solvent) associated with oligomers.     

Exactly alternating silarylene–siloxane polymers. VII. Thermal stability and degradation behavior of p-silphenylene–siloxane polymers with methyl,vinyl, hydrido,and/or fluoroalkyl side groups

The thermal stability and degradation behavior of a series of nine different exactly alternating silphenylene-siloxane polymers which contained methyl, vinyl, hydrido, 3,3,3-trifluoropropyl, and tridecafluoro-1,1,2,2-tetrahydrooctyl side groups, or their combinations, were investigated by dynamic and isothermal gravimetric analyses in air and in nitrogen. Two distinctly different mechanisms were observed in these atmospheres: a complex multi-step weight loss process in air and a single-step process in nitrogen. In nitrogen all polymers produced black, insoluble, highly stable degradation residues which were characterized by high carbon content. In contrast, in air the nonfluorine containing polymers degraded to pure silica, while the fluoroalkyl substituted polymers may have formed fluorosilicates of unspecified structures. There appears to be no significant molecular weight effect on the thermal stability of these polymers, at least not above an M _w value of about 35,000. Isothermal investigations indicate that 300°C in air and 350°C in nitrogen may be possible upper use temperatures for the methylvinyl substituted, exactly alternating silphenylene–siloxane polymers for extended periods of time. A strong thermostabilizing effect by vinyl side groups on the degradation behavior of these polymers was established. The extent of stabilization depends on the content of vinyl units, but it can already be clearly seen at the 5 mol % vinyl level, and it increases exponentially with increasing vinyl concentration. In contrast to this behavior, by comparison with the parent all-methyl substituted, exactly alternating silphenylene–siloxane polymers, the hydrido and fluroalkyl side groups reduce overall polymer thermal stability in terms of the degradation onset temperature, the temperature for 50% weight loss, and the amount of degradation residue. The presence of these groups also extends the later stages of the degradation processes to higher temperatures. Based on these and previous results, an order of stability is proposed as a function of the type of the substituent side groups for the thermal degradation of these polymers.     

Synthesis and characterization of phthalazinone‐based poly(aryl ether ketone) derived from 4,4′‐dichlorobenzophenone

As distinguished from the conventional preparation of poly(aryl ether ketone)s utilizing 4,4′‐difluorobenzophenone, a novel synthetic method of high molecular weight poly(phthalazinone ether ketone) derived from 4,4′‐dichlorobenzophenone was studied. Reaction conditions to get high molecular weight polymer were investigated in details. Experimentally, sulfolane was chosen as the reaction media and high molecular weight polymer could be obtained in 7–8 hr at 210°C. The cyclic oligomers in the polymer product reduced to below 3.0% when the concentration of the reactant is 1.6–1.7 g/ml. Fourier transform infrared (FT‐IR), ¹H NMR, and elemental analysis were used to confirm the structure of the obtained polymer. The amorphous polymer showed reasonable solubility in selective solvent, such as chloroform and N‐methyl‐2‐pyrrolidone, and tough, flexible, and transparent thin film can be readily prepared from their N‐methyl‐2‐pyrrolidone solution. The obtained polymer showed high glass transition temperature (T_g) up to 261°C detected by differential scanning calorimetry (DSC), and the temperature of 5% weight loss under nitrogen higher than 500°C detected by thermal gravimetric analysis (TGA), indicating its excellent thermal stability. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of novel polymer containing selenium by radical addition polymerization of 1,4-benzenediselenol to 1,4-divinylbenzene

A novel addition polymerization of 1,4-benzenediselenol (BDSe) to 1,4-divinylbenzene (DVB) was carried out with various azo radical initiators [dimethyl 2,2′-azobisisobutyrate (DAIB), 1,1′-azobis(1-acetoxy-1-phenylethane) (AAPE), and AIBN] in toluene at 65 and 75°C under a nitrogen atmosphere. The polymerization proceded without an induction period, and pale-yellowish powder polymers were obtained in 89% yields for 75 h (DAIB), 89% yields for 24 h (AAPE), and 60% yields for 8 h (AIBN). The molecular weight (M_w) of the insoluble polymers in toluene was about 4000 (IBN) to 14,000 (DAIB or AAPE) by GPC. The polymer had an alternating structure of BDSe to DVB units by ¹H-NMR, IR analyses, and selenium contents, but the polymer contained the diselenide linkage by Raman spectroscopy. By AIBN initiator, the yield of the polymers did not increase over 60% and higher molecular weight polymer was hardly obtained. According to the model addition reaction of benzeneselenol to styrene by AIBN, it was found that AIBN was consumed by the side reaction between dimethyl-N-(2-cyano-2-propyl)ketenimine derivedAppl 11 from AIBN and benzeneselenol to give the adduct C, MH⁺ 295 by DCI MS. On the other hand, DAIB and AAPE initiators, which do not form a ketenimine intermediate, gave the polymers of higher molecular weight in a higher yield. The polymer film exhibited high refractive index (n²⁵_D = 1.81) and a reversible phase transition between a transparency and an opaque by thermal mode. © 1994 John Wiley & Sons, Inc.     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Enhanced spin capturing polymerization: Numerical investigation of mechanism

Simulation on the kinetic scheme of enhanced spin capturing polymerizations (ESCP) were performed to reveal the influence of different parameters, e.g., initiation rate, spin capturing and side reactions on the properties (the monomer conversion, degree of polymerization, polydispersity index, and the fraction of “living” chains) of polymer obtained. The kinetic scheme of ESCP was solved numerically as well as the method of statistical moments of molecular weight distribution was applied to get some numerical expressions for analysis. The simulations showed that fast initiation rate can lead to decrease of living fraction and broadening of molecular weight distribution. Whereas high rate of spin capturing makes the polymer chains shorter but increases living character. And side reactions always decrease livingness of the polymer obtained. Finally in the case of absence of side reaction we were able to formulate criteria for formation of polymer with target molecular weight and quota of living chains via ESCP process. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2546–2556     

Transetherification polycondensation: The roles of the catalyst,monomer structure,and polymerization conditions

A detailed study of the novel melt transetherification polycondensation process, which was recently developed in our laboratory, is presented. The efficacy of different catalysts, such as p‐toluenesulfonic acid (PTSA), camphorsulfonic acid, and their pyridinium salts, was examined. The pyridinium salts, especially pyridinium camphorsulfonate (PCS), outperformed PTSA both in terms of the polymer molecular weights (the polydispersity) and the extent of discoloration of the polymer. The evolution of the molecular weight with the polymerization time was monitored with two different catalysts, PTSA and PCS, and these studies demonstrated that, while PTSA yielded polymers with a broad molecular weight distribution, the use of PCS curtailed possible side reactions that led to this broadening. Model reactions suggested that one possible reason for this broadening could be the formation of macrocyclics facilitated by an ether–ether exchange reaction, which was shown to occur much more rapidly when PTSA was used. A further interesting and rather unprecedented feature, which became apparent while the effect of the acid–catalyst concentration was being examined, was the dual role played by the acid, which acted both beneficially as a catalyst and detrimentally, defunctionalizing the chain end and terminating polymer growth. This conclusion was based on the observed decrease in the molecular weight of the polymer at very high catalyst concentrations, which suggested that there existed an optimum catalyst concentration at which a balance was struck between the molecular weight of the polymer formed and the polymerization time. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 102–111, 2004     

Manipulation of Molecular Weight Distribution Shape as a New Strategy to Control Processing Parameters

Molecular weight and dispersity (Ð ) influence physical and rheological properties of polymers, which are of significant importance in polymer processing technologies. However, these parameters provide only partial information about the precise composition of polymers, which is reflected by the shape and symmetry of molecular weight distribution (MWD). In this work, the effect of MWD symmetry on thermal and rheological properties of polymers with identical molecular weights and Ð is demonstrated. Remarkably, when the MWD is skewed to higher molecular weight, a higher glass transition temperature (T _g), increased stiffness, increased thermal stability, and higher apparent viscosities are observed. These observed differences are attributed to the chain length composition of the polymers, easily controlled by the synthetic strategy. This work demonstrates a versatile approach to engineer the properties of polymers using controlled synthesis to skew the shape of MWD.     

Synthesis and characterization of functional polyethylene with regularly distributed thioester pendants via ring‐opening metathesis polymerization

Four kinds of functional polyethylene carrying thioester pendants were synthesized via ring‐opening metathesis polymerization (ROMP) of alkyl cyclopent‐3‐enecarbothioate catalyzed by a ruthenium‐based commercial catalyst and subsequent hydrogenation of the ROMP products (alkyl = ethyl, n‐butyl, n‐octyl, or n‐dodecyl). In these polymers the pendant alkyl thioester groups are precisely distributed along the backbone on every five methylene carbons. Chain structure, molecular weight and molecular weight distribution of the polymers were characterized by ¹H and ¹³C NMR, and GPC. The ROMP reactions all reached high monomer conversions, and hydrogenation of the ROMP products were exhaustive. Thermal transitions and side chain crystallization behaviors of the polymer were investigated and characterized by DSC and TGA. Glass transition temperature and melting temperature of these polymers were higher than the counterparts containing ester pendants. TGA analysis indicated that all the thioester‐containing polymers exhibited moderate thermal stability, and the sulfur‐containing polymers show slightly lower thermal stability than their counterparts without sulfur. The new family of functionalized polyethylenes could be used as models of ethylene‐thioacrylate copolymers, and find applications as novel functional materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4027–4036     

Synthesis and characterization of semicrystalline cycloaliphatic polyester/poly(dimethylsiloxane) segmented copolymers

High molecular weight poly(dimethylsiloxane)/semicrystalline cycloaliphatic polyester segmented copolymers based on dimethyl-1,4-cyclohexane dicarboxylate were prepared and characterized. The copolymers were synthesized using a high trans content isomer that afforded semicrystalline morphologies. Aminopropyl-terminated poly(dimethylsiloxane) (PDMS) oligomers of controlled molecular weight were synthesized, end capped with excess diester to form a diester-terminated oligomer, and incorporated via melt transesterification step reaction copolymerization. The molecular weight of the polysiloxane and chemical composition of the copolymer were systematically varied. The polysiloxane segment was efficiently incorporated into the copolymers via an amide link and its structure was unaffected by low concentrations of titanate transesterification catalyst, as shown by control melt experiments. The homopolymer and copolymers were characterized by solution, thermal, mechanical, and surface techniques. The segmented copolymers were microphase separated as determined by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and by transmission electron microscopy (TEM). It was demonstrated that relatively short poly(dimethylsiloxane) segment lengths and compositions were required to maintain single phase melt polymerization conditions. This was, in fact, the key to the successful preparation of these materials. The copolymers derived from short poly(dimethylsiloxane) segments demonstrated good mechanical properties, melt viscosities representative of single phase polymer melts, and were easily compression molded into films. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3495–3506, 1997     

Synthesis and properties of polyoxyarylenesiloxanes

High molecular weight polymers containing oligosiloxanes in the backbone were made by the reaction of aromatic diols with α,ω-diaminosiloxane homologs. The glass transition temperatures dropped by 30–40°C in a homologous series with each siloxane added. The thermal stability also suffered when increasing the number of siloxane groups. The polymers all displayed high % char measurements and one polymer (disiloxane) tested had a V₀ rating by UL-94 testing. The trisiloxane-containing polymer had a high percent elongation at break (>300%). All the polymers tested were fairly susceptible to hydrolysis. © 1994 John Wiley & Sons, Inc.     

Optimization of direct arylation polymerization (DArP) through the identification and control of defects in polymer structure

As a newly emerged protocol for the synthesis of conjugated polymers, direct arylation polymerization (DArP) is an environmentally friendly and cost-effective alternative to traditional methods of polymerization. DArP efficiently yields conjugated polymers with high yield and high molecular weight. However, DArP is also known to produce defects in polymer chemical structure. Together with molecular weight and polydispersity, these defects are considered to be important parameters of polymer structure and they have a strong impact on optical, electronic and thermal properties of conjugated polymers. The four major classes of conjugated polymer defects inherent for DArP have been identified: homocoupling regiodefects, branching defects, end group defects, and residual metal defects. To have a precise control over the polymer properties, it is important to understand what causes the defects to form during the polymerization process and be able to control their content. Here within the scope of current literature, we discuss in detail the definition and origin of all these defects, their influence on polymer properties and effective means to control the defects through fine tuning of the DArP reaction parameters. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 135–147     

A successive route to amphiphilic graft copolymers with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic polystyrene side chains

A successive method for preparing novel amphiphilic graft copolymers with a hydrophilic backbone and hydrophobic side chains was developed. An anionic copolymerization of two bifunctional monomers, namely, allyl methacrylate (AMA) and a small amount of glycidyl methacrylate (GMA), was carried out in tetrahydrofuran (THF) with 1,1‐diphenylhexyllithium (DPHL) as the initiator in the presence of LiCl ([LiCl]/[DPHL]₀ = 2), at −50 °C. The copolymer poly(AMA‐co‐GMA) thus obtained possessed a controlled molecular weight and a narrow molecular weight distribution (M_w /M_n = 1.08–1.17). Without termination and polymer separation, a coupling reaction between the epoxy groups of this copolymer and anionic living polystyrene [poly(St)] at −40 °C generated a graft copolymer with a poly(AMA‐co‐GMA) backbone and poly(St) side chains. This graft copolymer was free of its precursors, and its molecular weight as well as its composition could be well controlled. To the completed coupling reaction solution, a THF solution of 9‐borabicyclo[3.3.1]nonane was added, and this was followed by the addition of sodium hydroxide and hydrogen peroxide. This hydroboration changed the AMA units of the backbone to 3‐hydroxypropyl methacrylate, and an amphiphilic graft copolymer with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic poly(St) side chains was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1195–1202, 2000