利用多中心合成方法同步合成含N-取代甘氨酸的类肽化合物

N-取代甘氨酸聚合体是一类新的聚合体化合物, 同多肽相比, N-取代甘氨酸聚合体具有抗酶解稳定性, 同时使用市售的伯胺作为构建单元(building block)大大地扩展了天然多肽分子结构的多样性, 本文报道了利用多中心多肽合成方法合成了九个含N-取代甘氨酸聚合体多肽杂合休, 由于此类聚合体具有抗酶的能力, 因此可用于蛋白酶抑制剂的研究。     

Synthesis of telogens and optimization of tetrafluoroethene telomerization process

The most advantageous technological parameters of tetrafluoroethene telomerization using 1-chloro-2-iodohexafluoropropane (telogen) towards the telomers n2-n4 or n1-n4 were experimentally established. The telomers n1-n4 were prepared with the yield of 48 mol% under the following conditions: temperature 170 °C, the molar ratio of 1-chloro-2-iodohexafluoropropane to tetrafluoroethene equal to 1.2, the autoclave filling of 1.5 kg dm⁻³. The maximum yield of telomers n2-n4 amounted to 27 mol% when the molar ratio of telogen to tetrafluoroethene was decreased to 0.7 and the other parameters of synthesis remained the same. The optimum parameters for the synthesis of telogens: 1-chloro-2-iodohexafluoropropane and 2-iodoheptafluoropropane have been also determined.     

Single-stranded oligonucleotide adducts formed by Pt complexes favoring left-handed base canting: steric effect of flanking residues and relevance to DNA adducts formed by Pt anticancer drugs

Platinum anticancer drug binding to DNA creates large distortions in the cross-link (G*G*) and the adjacent XG* base pair (bp) steps (G* = N7-platinated G). These distortions, which are responsible for anticancer activity, depend on features of the duplex (e.g., base pairing) and of the cross-link moiety (e.g., the position and canting of the G* bases). The duplex structure stabilizes the head-to-head (HH) over the head-to-tail (HT) orientation and right-handed (R) over left-handed (L) canting of the G* bases. To provide fundamental chemical information relevant to the assessment of such duplex effects, we examine (S,R,R,S)-BipPt(oligo) adducts (Bip = 2,2'-bipiperidine with S,R,R,S chiral centers at the N, C, C, and N chelate ring atoms, respectively; oligo = d(G*pG*) with 3'- and/or 5'-substituents). The moderately bulky (S,R,R,S)-Bip ligand favors L canting and slows rotation about the Pt-G* bonds, and the (S,R,R,S)-BipPt(oligo) models provide more useful data than do dynamic models derived from active Pt drugs. All 5'-substituents in (S,R,R,S)-BipPt(oligo) adducts favor the normal HH conformer (～97%) by destabilizing the HT conformer through clashes with the 3'-G* residue rather than through favorable H-bonding interactions with the carrier ligand in the HH conformer. For all (S,R,R,S)-BipPt(oligo) adducts, the S pucker of the 5'-X residue is retained. For these adducts, a 5'-substituent had only modest effects on the degree of L canting for the (S,R,R,S)-BipPt(oligo) HH conformer. This small flanking 5'-substituent effect on an L-canted HH conformer contrasts with the significant decrease in the degree of R canting previously observed for flanking 5'-substituents in the R-canted (R,S,S,R)-BipPt(oligo) analogues. The present data support our earlier hypothesis that the distortion distinctive to the XG* bp step (S to N pucker change and movement of the X residue) is required for normal stacking and X·X' WC H bonding and to prevent XG* residue clashes.     

Synthesis and structure of cyclic oligo(p-phenylene oxide)s, -(C6H4O)n- (n = 6-10)

Stepwise growth of oligo(p-phenylene oxide)s and cyclization via the Ullmann coupling reaction by using CuI/N,N-dimethylglycine afforded cyclic oligo(p-phenylene oxide)s, (n = 6-10). The structure of the new cyclophanes was determined by X-ray crystallography, which revealed that they have planar or slightly bent structures with diameters of 1.0-1.5 nm.     

Oxazoline-based antimicrobial oligomers: synthesis by CROP using supercritical CO2

A method using supercritical CO(2) to obtain biocompatible 2-oxazoline-based oligomers quaternized with different amines is described. The synthesized oligo(2-oxazoline)s display partial carbamic-acid insertion at one end. The syntheses of quaternary oligo(2-bisoxazoline)s and linear oligoethylenimine hydrochlorides are reported. Oligo(2-methyl-2-oxazoline) and oligo(2-bisoxazoline) quaternized with N,N-dimethyldodecylamine are the most efficient biocidal agents showing fast killing rates against Staphylococcus aureus and Escherichia coli. Linear oligoethylenimine hydrochloride shows the lowest MIC values but higher killing times against both bacteria. Based on the antimicrobial activity studies, a cooperative action of carbamic acid with the ammonium end group is proposed.     

Copolymers of 1,1-difluoroethene with tetrafluoroethene,chlorotrifluoroethene, and bromotrifluoroethene

Copolymers of 1,1-difluoroethene with tetrafluoroethene, chlorotrifluoroethene, and bromotrifluoroethene have been prepared by emulsion polymerization, and their crystallinity has been investigated by means of x-ray diffraction. The results are discussed in relation to copolymer composition and structure.     

Functional Polymers. III. Endcapping and Substitution on Polymers with Compounds Containing Ultraviolet-Absorbing Groups

Endcapping of oligo(oxyethylene) glycols was carried out by transesterification of methyl N,N-dimethylaminobenzoate with sodium methoxide as the catalyst or by the reaction of sodium salicylate with the ditosyl ester of the oligo(oxyethyl-ene) glycols. Several other common reactions were tried for the endcapping of the oligo(oxyethylene) glycols but were found to be either more cumbersome or unsuccessful. All products were obtained in high yield and high purity. The reactions of tetraalkylammonium carboxylates with aliphatic halides were found to be very general and mild reactions for the preparation of esters in high yield and high purity. It was found that these reactions could be utilized for the preparation of esters on polymers even if the carboxylate group was directly attached to the polymer chain. It was also demonstrated that the aliphatic halide group could be on the polymer, as in the case of polyepichlorohydrin. Copolymers of epichlorohydrin and glycidyl N,N-dimethylaminobenzoate with up to 90% glycidyl benzoate as the comonomer were prepared, and poly(tetra-butylammonium methacrylate) was effectively transformed with 4-(2-bromoethoxy)-2-hydroxybenzophenone into the corresponding ester. The products were characterized by the usual spectral means.     

Synthetic utilization of 2-chloro-1,1,1,2-tetrafluoroethane

β-Substituted α-fluoro-α,β-unsaturated carboxylic acids have been successfully synthesized, usually in a (Z)-stereospecific manner by way of a stepwise or a one-pot three-step procedure starting from 2-chloro-1,1,1,2-tetrafluoroethane (HCFC-124), one of the major byproducts of the industrial process for tetrafluoroethene formation from chlorofluoromethane (HCFC-22).     

一种新型的可生物降解的热敏凝胶微粒的制备

聚合物水凝胶是由高分子组成的三维空间交联网络与水的混合体系,有望在药物控制释放等领域获得广泛应用,某些水凝胶还具有显著的环境响应性,构成了一类主流的智能材料,在生物医用材料领域,对于材料的可降解性有严格要求,而单一的可降解药物缓释载体材料和单一的智能型水凝胶材料已有较多报道,但能够将这两种特性结合在同一种材料中的报道则很少,其中智能响应范围合适、降解速率易于大范围调节的合成水凝胶则更少。     

Learning from Peptides to Access Functional Precision Polymer Sequences

Functional precision polymers based on monodisperse oligo(N‐substituted acrylamide)s and oligo(2‐substituted‐α‐hydroxy acid)s have been synthesized. The discrete sequences originate from a direct translation of side‐chain functionality sequences of a peptide with well‐studied properties. The peptide was previously selected to solubilize the photosensitizer meta‐tetra(hydroxyphenyl)chlorin. The resulting peptidomimetic formulation additives preserve the drug solubilization and release characteristics of the parent peptide. In some cases, superior properties are obtained, reaching up to 40 % higher payloads and 27‐times faster initial drug release.     

含六个杂环的寡聚酰胺的合成

通过DCC／HOBT偶合反应,有效而简便地合成了含有六个N－甲基吡咯和N－甲基咪唑氨基酸的寡聚酰胺,在此合成中避免了氨基的保护和脱保护。     

Crystal and molecular structures and experimentally determined charge densities of fluorinated ethenes

Crystals of various fluorinated ethenes were grown by in situ crystallization from their melts on a diffractometer, allowing the structures of tetrafluoroethene (C2F4), trifluoroethene (C2HF)3, 1,1-difluoroethene (C2H2F2), (E)-1,2-difluoroethene (C2H2F2), and (Z)-1,2-difluoroethene (C2H2F2) to be determined by X-ray crystallography. Unexpectedly, the C=C bond lengths show only small variations arising from fluorine substitution. These findings are supported by ab initio calculations at a DFT level of theory and the results of topological analyses of the experimentally determined and theoretically calculated charge densities.     

Laser photosensitized oxidation of tetrafluoroethene by molecular oxygen

Surface-less conditions of CO₂ laser photosensitized (SF₆) oxidation of tetrafluoroethene with molecular O₂(³Σ) oxygen reveal that the true gas-phase reaction is accompanied with chemiluminiscence and proceeds via intermediary dioxetane to yield solely carbonyl fluoride.     

SYNTHESIS, CHARACTERIZATION, THERMAL DEGRADATION AND ELECT-RICAL CONDUCTIVITY OF OLIGO[2-(2-HYDROXYPHENYLIMINOMETHYL-BENZYLIDENE)AMINOPHENOL] AND OLIGOMER-METAL COMPLEXES

The oxidative polycondensation reaction conditions of 2-[(2-hydroxyphenyliminomethylbenzylidene)amino- phenol](2-HPIMBAP)has been accomplished by using air O_2 and NaOCl oxidants in an aqueous alkaline medium between 50-90℃.The optimum reaction conditions of the oxidative polycondensation and the main parameters of the process were established.At the optimum reaction conditions,yield of the products were found to be 67.72% and 61.49% for air O_2 and NaOCl oxidants respectively.The structures of the monom...     

Synthesis and spectroscopic properties of finite Ph2N-containing oligo(arylenevinylene) derivatives that emit blue to red fluorescence

[structure: see text] A series of oligo(phenylenevinylene) (OPV) derivatives with finite conjugation units were prepared in short steps from few building blocks. The central and terminal aryl groups of these OPV dyes contain cyano and Ph(2)N substituents, respectively, which affect color of fluorescence. The wavelength ranges from 472 nm (blue) to 614 nm (red) depending on the position of the cyano group.     

Template-directed synthesis using the heterogeneous templates produced by montmorillonite catalysis. A possible bridge between the prebiotic and RNA worlds

The synthesis of oligoguanylates [oligo(G)s] is catalyzed by a template of oligocytidylates [oligo(C)s] containing 2',5'- and 3',5'-linked phosphodiester bonds with and without incorporated C5'ppC groupings. An oligo(C) template containing exclusively 2',5'-phosphodiester bonds also serves as a template for the synthesis of complementary oligo(G)s. The oligo(C) template was prepared by the condensation of the 5'-phosphorimidazolide of cytidine on montmorillonite clay. These studies establish that RNA oligomers prepared by mineral catalysis, or other routes on the primitive earth, did not have to be exclusively 3',5'-linked to catalyze template-directed synthesis, since oligo(C)s containing a variety of linkage isomers serve as templates for the formation of complementary oligo(G)s. These findings support the postulate that origin of the RNA world was initiated by the RNA oligomers produced by polymerization of activated monomers formed by prebiotic processes.     

Synthesis of Optically Active beta-Amino Acid N-Carboxyanhydrides

Methodology has been developed for the general synthesis of optically active beta-amino acid N-carboxyanhydrides (beta-NCAs) through cyclization of N(beta)-Boc or N(beta)-Cbz beta-amino acids using phosphorus tribromide. The formation of beta-NCAs was confirmed by spectroscopy as well as an X-ray structural determination of beta-homoalanine-N-carboxyanhydride. The beta-NCA molecules could be polymerized in good yield to give optically active poly(beta-peptides) that adopt stable chiral conformations in solution. For example, helical oligo(L-beta-homophenylalanine) was synthesized by polymerization of L-beta-homophenylalanine-N-carboxyanhydride.     

齐聚苯撑乙烯-二氧化硅复合膜的制备及其光电性质研究

聚苯撑乙烯（PPV）及其复合物由于光致发光效率高及电荷传输性能好,故在光电器件方面的应用已受到广泛重视,但聚合物材料有自身的局限性,主要是：（1）在矣合时残留杂质影响器件的稳定性;（2）聚合物结构复杂多变使其发光机理与微观结构模糊不清。因此具有化学结构,化学纯度高的剂聚苯撑乙烯（oligo-PV)及其复合物的合成和理论研究吸引了许多研究者。     

Fluorescent oligo(N‐phenylmaleimide)s via aerobic radical telomerization initiated by benzylic hydrocarbons: Catalytic effect of CoII/N‐hydroxyphthalimide pair

Radical oligomerization of N‐phenylmaleimide (NPMI) was performed in benzylic hydrocarbons as the solvent. The thermally induced oligomerization occurred only above 130 °C, with the initiation attributed to autoxidation of benzylic hydrocarbons as well as formation and dissociation of charge‐transfer complexes between benzylic hydrocarbons and maleimides. The end‐group analysis on oligo(N‐ethylmaleimide) prepared under similar conditions confirmed that the chain transfer to benzylic hydrocarbons was the primary fashion in forming oligomeric chains, and radical telomerization underlaid the oligomerization with benzylic hydrocarbons as both the solvent, the initiator and the telogen. Co^II/N‐hydroxyphthalimide (NHPI) pairs could catalyze the telomerization at 110 °C. In such a catalytic process, Co^II‐based oxidative complexes oxidized benzylic hydrocarbons and NHPI into benzylic radicals and phthalimide N‐oxyl (PINO), and benzylic hydrocarbons underwent hydrogen atom transfer (HAT) to PINO. Oligo(NPMI)s were formed via HAT with benzylic hydrocarbons and NHPI. These oligo(NPMI)s exhibited fluorescent properties with excitation at 270–350 nm and 400–550 nm and emission at 530–750 nm. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3846–3857     

Theoretical Study on Electronic and Charge Transfer Properties of Oligo[8]thiophene and Its Circular,Hooped, and Helical Derivatives

The novel linear, circular, hooped, and helical molecules based on oligo[8]thio- phene were theoretically studied for the applications of charge transfer devices. To investigate the influence of topology for oligo[8]thiophene derivatives, the geometry structures, frontier molecular orbital （FMO） energies, charge transport properties, and stability property were predicted by density functional theory methods. The calculated results reported herein show that the oligo[8]thiophene derivative with linear structure has smaller energy gap, and fused oligo[8]thiophene derivative with circular structure has the smallest reorganization energy among the designed molecules. We have also studied the stability properties of the designed molecules, and oligo[8]thiophene derivatives are more stable tharJ the fused oligo[8]thiophene derivatives.