Phytoecdysteroids of plants of the genus Silene. XI. 2-Deoxy-α-ecdysone 3-acetate from Silene scabrifolia

From the epigeal organs ofSilene scabrifolia Kom. has been isolated the new phytoecdysteroid 2-deoxy-α-ecdysone 3-acetate (II) (0.0011%), C₂₉H₄₆O₆, mp 216–218°, [α] _D ²⁰ +131.9° (methanol). The enzymatic hydrolysis of (II) led to 2-deoxy-α-ecdysone (I). The acetylation of 2-deoxy-α-ecdysone (I) yielded (II) and the 22-monoacetate (III) and 3,22-diacetate (IV) of 2-deoxy-α-ecdysone, which have been described previously. Details of the IR, UV, CD, mass, and NMR spectra are given for (I) and of the IR, mass, and NMR spectra for (III).     

Synthesis and Photosensitive Properties of Poly(aryl imino) Containing Azobenzene Group (PAI-A)

Using 4,4′‐dibromobenzophenone and 4,4′‐diaminoazobenzene as monomers, poly(aryl imino) containing azobenzene unit (PAI‐A) was synthesized via palladium‐catalyzed amination, and structurally characterized by means of FT‐IR, ¹H NMR spectra and elemental analysis, the results of which show an agreement with the proposed structure. The UV absorption spectra were tested under different conditions. Additionally, differential scanning calorimetry (DSC) and thermogravimetric (TG) measurements show that PAI‐A possesses high glass transition temperature (T_g>176°C) and good thermal stability with high decomposition temperatures in nitrogen atmosphere (T_D>410°C).     

Synthesis,structures, and catalytic oxidation of three aqua-coordinated and oxo-bridged diruthenium(III) complexes with sulfobenzoate and 2,2′-bipyridine

Three new diruthenium(III) complexes, [Ru₂O(2-sb)₂(2,2′-bipy)₂(H₂O)₂]·2.5H₂O (1), [Ru₂O(3-sb)₂(2,2′-bipy)₂(H₂O)₂]·9H₂O (2), and [Ru₂O (4-sb)₂(2,2′-bipy)₂(H₂O)₂]·9H₂O (3), where sb^2? is sulfobenzoate dianion and 2,2′-bipy is 2,2′-bipyridine, were synthesized using hydrothermal methods and characterized by IR, elemental analysis, thermogravimetric analysis, UV–vis, and fluorescence spectra. The single crystal X-ray analysis showed that each of these complexes has a dinuclear core stabilized by two bridging carboxylates and one bridging O^2?. Variable sb^2? ligands (2-sb, 3-sb, and 4-sb) in these complexes lead to diverse electronic spectroscopic behavior. The efficiency of activating methyl phenyl sulfide oxidation utilizing H₂O₂ in 3 equiv. was studied at 23?±?2?°C. The effect of the amount of catalyst and solvents on activities was investigated. Under optimized reaction conditions, the major product was sulfoxide. Complex 1 gave significant conversion of 100 and 98% selectivity for sulfoxide after 4?h.     

Influence of methyl group position in bipyridine ligand on structure and luminescence of related zinc(II) nitrate complexes

Three new zinc(II) complexes of [Zn(6-mbipy)(η²-NO₃)₂] (1), [Zn(6,6′-dmbipy)(η²-NO₃)₂] (2) and [Zn(5,5′-dmbipy)(η²–NO₃)(H₂O)₂](NO₃).H₂O (3) were prepared from the reaction of 6-methyl-2,2′-bipyridine (6-mbipy), 6,6′-dimethyl-2,2′-bipyridine (6,6′-dmbipy) and 5,5′-dimethyl-2,2′-bipyridine (5,5′-dmbipy) with Zn(NO₃)₂·4H₂O in methanol, respectively. These three complexes were thoroughly characterized by elemental analysis, thermal gravimetric analysis, differential thermal analysis, infrared, UV–Vis, ¹H NMR and ¹³C{¹H} NMR spectroscopy, and their structures have all been determined by the single-crystal X-ray diffraction. The luminescence spectra of the title complexes show that the intensity of their emission bands is stronger than the bands for the free ligands.     

Polylactones. 16. Cationic Polymerization of Trimethylene Carbonate and Other Cyclic Carbonates

1,3-Dioxanone-2 (trimethylene carbonate) was polymerized by use of methyl triflate or triethyloxonium fluoborate under various reaction conditions. Chloroform, 1,2-dichloroethane, and nitrobenzene were used as solvents; the temperature was varied between 25 and 50°C; and the monomer/initiator ratio between 50 and 400. However, inherent viscosities above 0.29 dL/g ( M _n > 6000) were never obtained, owing to side reactions such as backbiting and formation of ether groups. IR and ¹H-NMR spectroscopy revealed that the polymerization mechanism agrees with that of the cationic polymerization of lactones in that propagation involves cleavage of the alkyl-oxygen bond. The active cationic chain end and the dead methylcarbonate end groups were identified by means of ¹H-NMR spectra. A reaction mechanism for the formation of ether groups is discussed. Furthermore, ¹H-NMR spectroscopy indicated that ethylene carbonate and biphenyl-2,2′-carbonate do not react with methyl triflate at 20, 60, or even 100°C.     

Synthesis,characterization and DNA binding and photocleavage studies of [Ru(bpy)2BDPPZ]2+, [Ru(dmb)2BDPPZ]2+ and [Ru(phen)2BDPPZ]2+ complexes and their antimicrobial activity

Polypyridyl ligand 9a,13a‐dihydro‐4,5,9,14‐tetraaza‐benzo[b]triphenylene‐11‐yl)‐phenyl‐methanone (BDPPZ) and its complexes [Ru(bpy)₂BDPPZ]²⁺, [Ru(dmb)₂BDPPZ]²⁺ and [Ru(phen)₂BDPPZ]²⁺ (where bpy = 2,2′‐bipyridine, dmb = 4,4′‐dimethyl‐2,2′‐bipyridine, phen = 1,10‐phenanthroline) have been synthesized and characterized by elemental analysis, IR, UV–vis, ¹H‐NMR, ¹³C‐NMR and mass spectra. The DNA‐binding properties of the complexes were investigated by absorption, emission, melting temperature and viscosity measurements. Experimental results indicate that the three complexes can intercalate into DNA base pairs. Photo activated cleavage of pBR‐322 DNA by the three complexes was also studied. Further, all three Ru(II) complexes synthesized were screened for their antimicrobial activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and properties of new soluble aromatic polyimides from 2,2′-bis(3,4-dicarboxyphenoxy)biphenyl dianhydride and aromatic diamines

A new aromatic tetracarboxylic dianhydride having a crank and twisted noncoplannar structure, 2,2′-bis(3,4-dicarboxyphenoxy)biphenyl dianhydride, was synthesized by the reaction of 4-nitrophthalonitrile with biphenyl-2,2′-diol, followed by hydrolysis and cyclodehydration. The biphenyl-2,2′-diyl-containing aromatic polyimides having inherent viscosities up to 0.66 dL/g were obtained by the conventional two-step procedure starting from the dianhydride monomer and various aromatic diamines. Most of the polyimides were readily soluble in amide-type solvents such as N,N-dimethylacetamide and N-methyl-2-pyrrolidone. The aromatic polyimides had glass transition temperatures in the range of 205–242°C, and began to lose weight around 415°C, with 10% weight loss being recorded at about 500°C in air. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2021–2027, 1998     

Synthesis, spectral characterization, and structural investigation of mononuclear salen-type Cu(II) and Zn(II) complexes of a potentially octadentate N2O6 Schiff base ligand derived from binaphthol

A new potentially octadentate N₂O₆ Schiff base ligand, H₂L derived from the condensation of 2,2′-(1,1′-binaphthyl-2,2′-diylbis(oxy))dianiline and o-vanillin, along with its copper(II) and zinc(II) complexes, is synthesized and has been characterized by elemental analyses, IR, UV–vis, ¹H and ¹³C NMR spectra, as well as conductivity measurements. H₂L forms mononuclear complexes of 1:1 (metal:ligand) stoichiometry with Cu(II) and Zn(II), and conductivity data confirm the non-electrolyte nature of these complexes. The [ZnL] and [CuL] complexes display very different solid-state structures, as determined by X-ray crystallography. While the [ZnL] complex has a distorted octahedral geometry about the metal, the [CuL] complex displays a distorted square planar geometry about the copper, with long Cu–O(ether) distances of 2.667 Å.     

1H NMR Study of Hindered Internal Rotation of Tetramethylthiuram Disulfide in Binary Dimethyl Sulfoxide‐Chloroform Mixtures

Hindered internal rotation about the C‐N single bonds joining the thiuram disulfide was studied by ¹H NMR complete line‐shaped analysis in different dimethyl sulfoxide‐chloroform (DMSO‐CDCl₃) mixtures. From the temperature dependence of methyls proton spectra, activation parameters (E_a, ΔH^≠, ΔS^≠, and ΔG^≠) were obtained. The Arrhenius plots showed a distinct isokinetic temperature at about 35 °C at which the exchange rate is more or less independent of the solvent composition. The resulting ΔH^≠ against TΔS^≠ plot showed a firmly good linear correlation, indicating the existence of an enthalpy‐entropy composition in an exchange process.     

Ring-opening polymerisation of ɛ-caprolactone catalysed by Brønsted acids

Two new Brønsted acids [2,2′-ethylidene-bis (4,6-di-tert-butylphenol)] phosphoric acid (EDBPPOOH) and (3,3′,5,5′-tetra-tert-butylbiphenyl-2,2′-diol) phosphoric acid (TBPO-POOH) were synthesised and fully characterised by ¹H NMR and ¹³C NMR spectra and mass spectra. The ringopening polymerisation (ROP) of ?-caprolactone (?-CL) catalysed by the two Brønsted acids proceeded at 110°C without a solvent or at ambient temperature in toluene. Experimental results indicated that the two Brønsted acids were efficient catalysts for the ROP of ?-CL with moderate number-average molar mass (Mn) and narrow polydispersity indices (PDI). The catalytic activity of TBPO-POOH is higher than EDBP-POOH in the ROP of ?-CL. After benzyl alcohol was added, it was able to accelerate the polymerisation process. The polymerisation can also occur with the addition of water with a monomer/catalyst/initiator mole ratio of 100: 1: 1. The living polymerisation was ascertained by the linear relationships of the Mn vs. monomer conversion, then it was further confirmed by a second-feed experiment of a double monomer producing double Mn. A kinetic study of the relationships between monomer concentration and time revealed a first-order dependence on monomer concentration in the polymerisation. End-group analysis of ¹H NMR spectra and electrospray-ionisation mass spectra suggests that the two Brønsted acids are capable of catalysing and initiating the ROP of ?-CL.     

Synthesis and Characterization of Polymers Derived from the Copolymerization of 1,1′-Dihydroxyethyl-2,2′-Biimidazole and the Diglycidyl Ether of Bisphenol A

Abstract

1,1′-Dihydroxyethyl-2,2′-biimidazole has been used as a copolymerizing monomer with the diglycidyl ether of bisphenol A in the preparation of biimidazole-containing epoxy polymers. Polymerization reactions were studied in bulk, with and without catalyst, and in N,N-dimethylforma-mide and anisole solvents, with and without catalyst. FT-IR and NMR spectra, molecular weight, thermal and solubility characteristics were obtained. Polymers isolated as amorphous light brown solids were found to be only sparingly soluble in THF or in highly polar nitrogen-containing solvents (DMF, NMP, pyridine). These materials exhibited molecular weights up to 37 000 for SnC1₄-catalyzed polymerization carried out in DMF. A glass-transition temperature of 391°C was observed for polymers obtained under uncatalyzed solventless conditions. The glass transition temperature was 373°C for product obtained under SnC1₄-catalyzed, solventless conditions. Thermogravimetric analysis in air of polymers obtained under varying solvent and catalyst conditions showed less than 25% weight loss below 330°C and greater than 75% weight loss above 400°C.     

Preparation and properties of aromatic polyimides from 2,2′-bis(p-aminophenoxy)biphenyl or 2,2′-bis)p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing a biphenyl-2,2′-diyl or 1,1′-binaphthyl-2,2′-diyl unit were prepared by a conventional two-step method starting from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides. The polyimides having inherent viscosities of 0.69–0.99 and 0.51–0.59 dL/g, respectively, were obtained. Some of these polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. Transparent, flexible, and pale yellow to brown films of these polymers could be cast from the DMAc or NMP polyamic acid solutions. These aromatic polyimides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 200–235 and 286–358°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Syntheses,crystal structures,and magnetic properties of two new manganese(II) complexes based on biphenyl-2,5,2′,5′-tetracarboxylic acid

Two new complexes, [Mn(H₂bptc)(2,2′-bpy)₂]?·?2H₂O (1) and [Mn₃(Hbptc)₂(2,2′-bpy)₃(H₂O)₈]?·?2H₂O (2) (H₄bptc?=?biphenyl-2,5,2′,5′-tetracarboxylic acid, 2,2′-bpy?=?2,2′-bipyridine), have been synthesized under hydrothermal conditions. Their structures have been characterized by single-crystal X-ray diffraction, elemental analyses, IR spectra, powder X-ray diffraction, and thermogravimetric analyses. Complexes 1 and 2 are both linked into 3-D supramolecular networks by non-covalent interactions (O–H?···?O, C–H?···?O, C–H?···?π, and π?···?π). Complexes 1 and 2 exhibit weak antiferromagnetic interactions.     

Indium(III) complexes containing bithiazole derivatives,chloride, methanol,and dimethyl sulfoxide: X‐ray studies,spectroscopic characterization,and thermal analyses

[In(dm4bt)Cl₃(MeOH)]?·?0.5dm4bt (1) (dm4bt is 2,2′‐dimethyl‐4,4′‐bithiazole) and [In(4bt)Cl₃(MeOH)] (2) (4bt is 4,4′‐bithiazole) were prepared from the reaction of 4,4′‐bithiazole and 2,2′‐dimethyl‐4,4′‐bithiazole with InCl₃?·?4H₂O in methanol, respectively. [In(4bt)Cl₃(DMSO)] (3) was also prepared from recrystallization of 2 in DMSO. These complexes were characterized by IR, UV‐Vis, ¹H NMR, ¹³C{¹H} NMR, and luminescence spectroscopy and their structures were studied by single‐crystal X‐ray crystallography. The thermal stabilities of 1 and 3 were studied by thermogravimetric and differential thermal analyses.     

Synthesis,structure, and complexing ability of fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-dicarbonyl) compounds

New fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-diketones) and 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(3-oxopropionates) were synthesized by azo coupling of the corresponding 1,3-dicarbonyl compounds with biphenyl-4,4′-bis(diazonium) dichloride. Complexing ability of the obtained bis-hydrazones was studied, and new coordination compounds of the general formula M₂L₂ [where M = Ni(II), Cu(II); L = fluoroalkyl-containing 2,2′-(biphenyl-4,4′-diyldihydrazono)bis(1,3-diketone)] were obtained.     

A comparison of the structure,flexibility and mesogenic properties of 4-methoxy-4′-cyanobiphenyl and the α,α,α-trifluorinated derivative

Abstract

The compound 4-cyano-4′-(α,α,α-trifluoromethoxy)biphenyl (1OCBF₃) has been synthesized. Unlike the fully protonated analogue, 4-cyano-4′-methoxybiphenyl (1OCB), it does not show a liquid crystalline phase on cooling from the melting point (51°C) to room temperature. The transition temperature to a monotropic nematic phase was obtained as approximately 0°C by determining the transition temperatures of mixtures with 1OCB. The structures, conformational properties and orientational ordering of both 1OCB and 1OCBF₃ as solutes in a nematic solvent ZLI 1132 have been investigated via the 17 dipolar couplings obtained by analysing the proton and fluorine NMR spectra of these solutions. It is concluded that the major difference between the two molecules lies in the potential, V(φ₂), governing rotation about the ring–oxygen bonds. In 1OCB the potential has the same form as in anisole, with a minimum when the C–O bond is in the plane of the attached ring (φ₂ = 0°), and a maximum of about 15 kJ mol^?1 when φ₂ is 90°. In 1OCBF₃ the barrier to rotation about the ring–O bond decreases substantially to being near zero.     

Synthesis and properties of noncoplanar rigid‐rod aromatic polyhydrazides and poly(1,3,4‐oxadiazole)s containing phenyl or naphthyl substituents

Two new phenyl‐ and naphthyl‐substituted rigid‐rod aromatic dicarboxylic acid monomers, 2,2′‐diphenylbiphenyl‐4,4′‐dicarboxylic acid ( 4 ) and 2,2′‐di(1‐naphthyl)biphenyl‐4,4′‐dicarboxylic acid ( 5 ), were synthesized by the Suzuki coupling reaction of 2,2′‐diiodobiphenyl‐4,4′‐dicarboxylic acid dimethyl ester with benzeneboronic acid and naphthaleneboronic acid, respectively, followed by alkaline hydrolysis of the ester groups. Four new polyhydrazides were prepared from the dicarboxylic acids 4 and 5 with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. These polyhydrazides were amorphous and readily soluble in many organic solvents. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass transition temperatures in the range of 187–234 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(1,3,4‐oxadiazole)s exhibited T_g's in the range of 252–283 °C, 10% weight‐loss temperature in excess of 470 °C, and char yield at 800 °C in nitrogen higher than 54%. These organo‐soluble polyhydrazides and poly(1,3,4‐oxadiazole)s exhibited UV–Vis absorption maximum at 262–296 and 264–342 nm in NMP solution, and their photoluminescence spectra showed maximum bands around 414–445 and 404–453 nm, respectively, with quantum yield up to 38%. The electron‐transporting properties were examined by electrochemical methods. Cyclic voltammograms of the poly(1,3,4‐oxadiazole) films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited reversible reduction redox with E_onset at ?1.37 to ?1.57 V versus Ag/AgCl in dry N,N‐dimethylformamide solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6466–6483, 2006     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

Three new zinc(II) complexes constructed by biphenyl-2,2′,6,6′-tetracarboxylic acid: Effect of solvents and terminal ligands

Interaction of biphenyl-2,2′,6,6′-tetracarboxylic acid (H₄bta) and Zn(II) ions in DMF led to the formation of a one-dimensional coordination polymer, while in the presence of 1,10-phenanthroline and 1H,1′H-2,2′-biimidazole as terminal ligands in H₂O, analogous interactions induced the generation of two-dimensional layers with (6, 3) topology. The bta ligands in these three coordination polymers adopt η⁴,μ₂-tetradentate, η⁵,μ₄-pentadentate and η⁴,μ₄-tetradentate coordination modes, respectively, and the corresponding angles of two benzene rings of bta ligands are 70.52, 83.81 and 73.35°, in accordance with the coordination modes and steric hindrance effect of the terminal ligands.     

Synthesis and photophysical properties of novel amphiphilic ruthenium (II) complexes containing 4,4′‐dialkylaminomethyl‐2,2′‐bipyridyl ligands

The synthesis of a number of new 2,2′‐bipyridine ligands functionalized with bulky amino side groups is reported. Three homoleptic polypyridyl ruthenium (II) complexes, [Ru(L)₃]²⁺ 2(PF₆^?), where L is 4,4′‐dioctylaminomethyl‐2,2′‐bipyridine (Ru4a), 4,4′‐didodecylaminomethyl‐2,2′‐bipyridine (Ru4b) and 4,4′‐dioctadodecylaminomethyl‐2,2′‐bipyridine (Ru4c), have been synthesized. These compounds were characterized and their photophysical properties examined. The electronic spectra of three complexes show pyridyl π → π* transitions in the UV region and metal‐to‐ligand charge transfer bands in the visible region. Copyright © 2005 John Wiley & Sons, Ltd.