Structure of a self-assembled hydrogen-bonded ‘living’ main chain liquid crystalline polymer

A main chain hydrogen-bonded liquid crystalline polymer was formed by melt mixing two complementary components, A and B, which in their individual states do not exhibit liquid crystallinity. The structure of the polymer and the thermal stability of its mesophase were studied using synchrotron radiation SAXS/WAXS/DSC at Daresbury (UK) and by variable temperature Fourier transform infrared. The chain extension, or “polymerization” process, was accelerated at the point when the polymer formed a liquid crystalline phase upon cooling from the isotropic melt. The polymer has an aabb chain structure and forms a smectic layer with a length of the A-B repeating unit. The hydrogen-bonded main chain polymer studied here is a monotropic liquid crystal. Above 150°C, it exhibits kinetic stabilization of its monotropic smectic phase. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1617–1624, 1998     

Effect of solute hydrophobicity on phase behaviour in solutions of thermoseparating polymers

 Two-phase systems consisting of a polymer rich phase and polymer depleted phase, where the polymer is either ethyl(hydroxy ethyl)cellulose (EHEC) or Ucon (a random copolymer of ethylene oxide and propylene oxide), have been studied. Both of these polymers can be separated from an aqueous solution by either temperature increase or addition of cosolutes. The polymers are thermoseparating and phase separate in water solutions at the cloud point temperature. Two types of EHEC have been studied: one with a cloud point at 60 °C and the other at 37 °C. The Ucon polymer used in this study has a cloud point at 50 °C. Ternary phase diagrams of polymer/water/cosolute systems have been investigated. When a strongly hydrophilic or hydrophobic cosolute is added to an EHEC- or Ucon–water solution, a phase separation occurs already at, or below, room temperature. As cosolutes, hydrophobic molecules like phenol, butyric and propionic acid, and hydrophilic molecules like glycine, ammonium acetate, sodium carboxylates (acetate to valerate), were studied. The polymer rich phase formed when mixing polymer, water and cosolute was strongly enriched or depleted with hydrophobic or hydrophilic cosolutes, respectively. The two phase region increased for propionic acid, butyric acid and phenol as a result of increased cosolute hydrophobicity. The opposite occurred in the series sodium acetate, sodium butyrate and sodium valerate. The effect of temperature on the phase behaviour has also been investigated. Model calculations based on Flory–Huggins theory of polymer solutions are presented, in form of a phase diagram, which semiquantitatively reproduce some experimental results. Received: 5 July 1996 Accepted: 4 November 1996     

Conformational change of proline residues observed in swollen and shrunken phases: γ‐Ray synthesis and variable temperature circular dichroism spectra of a thermo‐responding polymer,poly(acryloyl‐Pro‐OMe)

Poly(acryloyl‐L ‐proline‐methyl ester) ( 1 ) has optically active side chain, and constitutes thermoresponsive hydrogels upon crosslinking. In this study, we have prepared uncrosslinked polymer of 1 with a 10‐kGy irradiation dose of γ‐ray. For this polymer, 1 , variable temperature circular dichroism (CD) and ¹H NMR spectra have been studied in the range of 0–30 °C. The intense CD spectrum at 0 °C suggests that the side chains in 1 have an ordered orientation. The CD intensity decreases gradually with increasing temperature. The decreased intensity of CD spectra indicates that the disordering occurs for the side‐chain orientation. The CD band shape changes discontinuously at 20 °C. In the ¹H NMR spectra, signals disappear above 20 °C. These spectral change at 20 °C indicate that the phase transition occurs at around 20 °C from swollen to shrunken phase. Even after the phase transition, the CD spectra are still changing with isochromic point at 212 nm. It appears that the side‐chain conformation is still changing from one state to the other state in the shrunken phase polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4524–4530, 2000     

Poly(N-isopropylacrylamide). II. Effect of polymer concentration,temperature, and surfactant on the viscosity of aqueous solutions

The effects of polymer concentration, temperature, and surfactant on the rheological properties of poly(N-isopropylacrylamide), poly NIPAM, were studied. Below 28°C the viscosity decreased with increasing temperature according to the Arrhenius expression. However, at 29°C the viscosity increased to a maximum value at 32°C, the lower critical solution temperature (LCST) for aqueous polyNIPAM. Higher temperatures gave a much lower viscosity. This unusual rheological behavior was explained by the phase behavior of the polymer. Sodium dodecyl sulfate (SDS) binding to polyNIPAM increased the cloud point temperature (CPT) and attenuated the unusual rheological behavior of polyNIPAM in water. © 1993 John Wiley & Sons, Inc.     

Unusual effect of molecular weight and concentration on thermoresponsive behaviors of well‐defined water‐soluble semirigid polymers

A series of water‐soluble semirigid thermoresponsive polymers with well‐defined molecular weights based on mesogen‐jacketed liquid crystal polymers (MJLCPs), poly[bis(N‐hydroxyisopropyl pyrrolidone) 2‐vinylterephthalate] (PHIPPVTA) have been synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization. Dynamic light scattering (DLS) revealed that the novel monomer and polymers have thermoresponsive properties with cloud point in the range between 10 and 90 °C. The cloud point was increased by 56.2 °C when the polymer molecular weight increased from 0.47 × 10⁴ g mol^?1 to 3.69 × 10⁴ g mol^?1. In addition, the cloud point of PHIPPVTA was decreased by 18.8 °C with the increase of polymer concentration from 5 to 10 mg mL^?1. A slight increase (0.1–3.5 °C) of cloud point has been observed after knocking off the end‐groups of PHIPPVTA. Moreover, the cloud point of polymer increased with increasing of its molecular weight with or without the trithiocarbonate end‐groups, which showed the opposite trend comparing with other thermoresponsive polymers with flexible backbones. These polymers show a dramatic solvent isotopic effect that the cloud point in D₂O was lower than in H₂O. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Unexpected Chiro‐Thermoresponsive Behavior of Helical Poly(phenylacetylene)s Bearing Elastin‐Based Side Chains

The thermoresponsive behavior of an elastin‐based polymer can be altered by the polymeric macromolecular conformation. Thus, when the elastin basic amino acid sequence VPGVG is used as a pendant group of a poly(phenylacetylene) (PPA) its thermoresponsive behavior in water can be remotely detected through conformational changes on the formed helix. Circular dichroism at different temperatures shows an inversion of the first Cotton effect (450 nm) at 25.8 °C that matches with the cloud point temperature. The elastin‐based side‐chain poly(phenylacetylene) shows an upper critical solution temperature with low pH and concentration dependency, not expected in elastin‐based polymers. It was found that the polymer self‐assembles in water into spherical nanoparticles with hydrodynamic diameters of 140 nm at the hydrophobic state.     

Multistimuli responsive grafted poly(ether tert‐amine) (gPEA): Synthesis,characterization and controlled morphology in aqueous solution

Multistimuli responsive grafted poly(ether tert‐amine) (gPEAs), which were comprised of poly(propylene oxide) (PPO) in backbone and poly(ethylene oxide) (PEO) as grafted chain, were successfully synthesized through nucleophilic addition/ring‐opening reaction of commercial poly(propylene glycol) diglycidyl ether and Jeffamine L100. These gPEAs exhibit very sharp response to temperature, pH and ionic strength with tunable cloud point (CP). The CP of gPEA aqueous solution increases with increasing the PEO content or decreasing pH value, varying from 27 to 77 °C. Compared with linear PEA101, gPEA110 of completely grafted structure in aqueous solution exhibits sharper response to temperature with ΔT around 1 °C. The results obtained from TEM and dynamic light scattering reveal that gPEAs are dispersed as uniform sized nano‐micelles in aqueous at room temperature, which can further aggregate into mesoglobules of complex structure at high temperature (>CP). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6353–6361, 2009     

Polycondensation of bis(p-nitrophenyl) β-truxinate with diamine

Model reaction of bis(4-nitrophenyl) β-truxinate (BNPT) with aliphatic amines proceeded quantitatively at room temperature. Accordingly, polycondensation of BNPT with various diamines was carried out at room temperature or 80°C. During the polycondensation of BNPT with diamines, the precipitation of polymer or the observed gelation of polymerization solution occurred, which may limit the molecular weight of the polymer. On the other hand, the reaction of BNPT with 1,3-(4-piperidyl)propane (DPP) proceeded homogeneously to give the polymer with relatively high molecular weight, and the obtained polyamide (P-1e) showed excellent solubility in many solvents. The study of TG and DTA indicated that the obtained polymers were stable at lower temperature than around 270°C. The polymer prepared from the polycondensation of BNPT with hexamethylenediamine showed melting point and decomposition due to the imidation at 282°C. The photochemical reaction of these polymers was carried out in the film state. The irradiation of 254 nm light caused an absorption at 272 nm to appear and the molecular weight to decrease. This meant that the scission of cyclobutane ring in the main chain occurred to give cinnamamide structures. Also, the absorption at 272 nm decreased by the irradiation of 302.5 nm light. However, the UV spectrum of irradiated polymer did not agree with that of the original polymer. These results suggested that the dimerization of the resulting cinnamamide moieties occurred in the competition of their trans–cis-isomerization. On the other hand, the rate of scission of cyclobutane ring of P-1e was faster than that of the corresponding polyamide containing α-truxillamide structure.     

Well‐defined thermosensitive,water‐soluble polyacrylates and polystyrenics with short pendant oligo(ethylene glycol) groups synthesized by nitroxide‐mediated radical polymerization

We report the synthesis and thermosensitive properties of well‐defined water‐soluble polyacrylates and polystyrenics with short pendant oligo(ethylene glycol) groups. Four monomers, methoxydi(ethylene glycol) acrylate (DEGMA), methoxytri(ethylene glycol) acrylate (TEGMA), α‐hydro‐ω‐(4‐vinylbenzyl)tris(oxyethylene) (HTEGSt), and α‐hydro‐ω‐(4‐vinylbenzyl)tetrakis(oxyethylene) (HTrEGSt), were prepared and polymerized by nitroxide‐mediated radical polymerization with 2,2,5‐trimethyl‐3‐(1‐phenylethoxy)‐4‐phenyl‐3‐azahexane as an initiator. Kinetics and gel permeation chromatography analysis showed that the polymerizations were controlled processes yielding polymers with controlled molecular weights and narrow polydispersities. All polymers could be dissolved in water, forming transparent solutions, and undergo phase transitions when the temperature was above a critical point. The thermosensitive properties were studied by turbidimetry and variable‐temperature ¹H NMR spectroscopy. The cloud points of the polymers of DEGMA, TEGMA, HTEGSt, and HTrEGSt were around 38, 58, 13, and 64 °C, respectively. For all four polymers, the cloud point increased with decreasing concentration and increasing molecular weight in the studied molecular weight range of 5000–30,000 g/mol. The removal of the nitroxide group from the polymer chain end resulted in a higher cloud point. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2454–2467, 2006     

Thermal response of a PVCL–HA conjugate

The synthesis and self‐assembling of a thermoresponsive conjugate of hyaluronic acid (HA) and poly(N‐vinylcaprolactam) (PVCL) is reported. Both polymers were end functionalized: HA via reductive amination, thereby introducing an azide endgroup to the chain end, and PVCL via thioetherification to introduce a propargyl group. The two were coupled with a copper assisted “click” reaction into a bioconjugate composed of HA blocks with the molar mass 3,600 g mol^?1 (1618 saccharide units) and PVCL blocks of 3,500 g mol^?1 (～25 repeating units). The cloud point temperature measured by transmittance was 50–51 °C in water. The calorimetrically observed phase transition temperature of PVCL in the conjugate increased by 2 °C to 47.7 °C, whereas the enthalpy of the phase transition was unaffected by the conjugation. HA‐PVCL conjugate self‐assembles in water upon heating into monodisperse, colloidally stable, hollow spherical particles whose size may be tuned with the heating rate of the solution. Slow and fast heating resulted in vesicles with the hydrodynamic radii of 443 or 275 nm, respectively. The heating rate did not, however, affect the cloud point. Salt did not noticeably affect the size of the polymer particles, presumably because of interactions between the HA and PVCL blocks. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 425–436     

The use of photoinitiated free-radical cyclopolymerization in the preparation of novel side-chain liquid-crystalline polydienes

The technique of photoinitiated free-radical cyclopolymerization has been used to produce a variety of novel side-chain liquid-crystalline (SCLC) polymers in which an alicyclic ring structure is incorporated into a polymer backbone. Most of the SCLC polymers gave glass transition temperatures (T_g) around room temperature and clearing points around 60–70°C. However, the poly(1,5-hexadiene) was the exception to this, exhibiting a T_g value of 14.5°C and a clearing point of 132.5°C. Confirmation of the structure of the alicyclic ring along the polymer backbone is extremely difficult to obtain, but evidence is given in the paper to support the ring structure.     

Glass transition in nylons

Differential thermal analysis (DTA) of some commercial nylons has disclosed some anomalous phenomena with respect to the glass transition, generally considered to occur at 40–50°C. On the first heat cycle the transition occurs normally. On cooling, however, no corresponding transition occurs, and on an immediate rerun the transition has disappeared. If another DTA thermogram is made after a few hours, the transition begins to reappear, but at a temperature lower by a few degrees. After about five days rest, the transition is again normal in size and temperature. On annealing at 75°C, the 43°C transition is pushed up to about 92°C. On resting after annealing, transitions appear at both 40 and 92°C. These phenomena are explained in terms of the slow formation of a hydrogen-bonded network in the amorphous regions of the polymer. It is the disruption of this network that is normally considered to be the glass transition in nylons. The network is slow in re-forming because of problems involved in matching up potential hydrogen-bonding sites, which are, of course, distributed at intervals along the polymer chain. The temperature at which the network is disrupted is apparently dependent not so much on the ratio of bonding to nonbonding sites, as on the temperature at which it was formed.     

Solution Behavior of Poly(n-Isopropylacrylamide) in Water: Effect of Additives

The effect of different kinds of additives (electrolytes, nonelectrolytes, hydrotropes, and surfactants) on the cloud point (CP) of low molecular weight and narrow dispersed poly(n-isopropylacrylamide) (PNIPAM) synthesized via reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization was examined. The CP showed a concentration dependent variation and it is greatly modified in the presence of additives. The size of the random polymer coil at 30°C obtained from dynamic light scattering (DLS) measurements is often influenced by the presence of additives. We have explained the effects of different additives on PNIPAM in terms of their interaction with polymer and resultant changes in the coil structure.     

Cohesional Entanglement of Amorphous Polymer in Glass State as Probed by Equilibrium Swelling in a "Non-Solvent

ＩｎｔｒｏｄｕｃｔｉｏｎＣｈａｉｎｅｎｔａｎｇｌｅｍｅｎｔｉｎｒｕｂｂｅｒｙａｎｄｆｌｕｉｄｓｔａｔｅｏｆａｎａｍｏｒｐｈｏｕｓｐｏｌｙｍｅｒｉｓａｃｈａｒａｃｔｅｒｉｓｔｉｃｆｅａｔｕｒｅｏｆｔｈｅｃｏｎ ｄｅｎｓｅｄｓｔａｔｅｏｆｌｏｎｇｃｈａｉｎｍａｃｒｏｍｏｌｅｃｕｌｅｓ .Ｔｈｅｅｎｔａｎｇｌｅ ｍｅｎｔｃｏｎｃｅｐｔｗａｓｅｓｔａｂｌｉｓｈｅｄｔｈｒｏｕｇｈｓｔｕｄｉｅｓｏｆｍｅｌｔｖｉｓ ｃｏｓｉｔｙｂｅｈａｖｉｏｒ,ｉｎｒｅｓｐｅｃｔｔｏｔｈｅｍｏｌａｒｍａｓｓｄｅｐｅｎｄｅｎｃｅｏｆ…     

Phase transition of layer structure of poly(p-benzenedithiol-co-p-diethynylbenzene) by heat or photon mode

Phase transition of the layer structure of poly(p-benzenedithiol-co-p-diethylbenzene) obtained in solid state polymerization was studied by a thermal treatment or UV irradiation under a nitrogen atmosphere. The peak intensities in the X-ray diffraction diagram of polymers gradually decreased with the thermal treatment time above 55°C. Below 50°C the layer structure of polymers hardly changed. The apparent activation energy for the phase transition was about 15 Kcal/mol [63 KJ/mol] at the initial stage and gradually decreased to a few Kcal/mol [ca. 2 KJ/mol]. UV light from a high-pressure mercury lamp also gradually induced the phase transition from the layer structure to an amorphous one. The pristine polymer possesses phase transition points at 75, 95 and 130°C. The exothermic transition at 75°C can be understood as the thermal destruction of the semistable layer structure. The exothermic transition at 95°C may be correspond to the cis → trans thermal isomerization of the C?°C bond in the polymer main chain. The diffuse reflectance spectrum of the pristine polymer differed from that of the amorphous polymer obtained by the thermal treatment of the pristine polymer. SEM photographs of the pristine polymer showed a particular surface structure, i.e. entangled fibrous material. TEM photographs of the pristine polymer exhibited a bright valley-and-hill structure, whereas that of the amorphous polymer obtained by thermal treatment exhibited a plain surface.     

Nonionic surfactant and temperature effects on the viscosity of hydrophobically modified hydroxyethyl cellulose solutions

Nonionic surfactant and temperature effects on the viscosity of hydrophobically modified hydroxyethyl cellulose (HMHEC) solutions are investigated experimentally. Weak shear thickening at intermediate shear rates takes place for HMHEC at moderate concentrations and becomes more significant at lower temperatures. While this amphiphilic polymer in surfactant-free solution does not turn turbid by heating to 95 degrees C, its mixture with nonionic surfactant shows a lower cloud point temperature than does a pure surfactant solution. For some mixture cases, phase separation takes place at temperatures as low as 2 degrees C. The drop of cloud point temperature is attributed to an additional attractive interaction between mixed micelles via chain bridging. With increasing temperature, the viscosity of an HMHEC-surfactant mixture in aqueous solution first decreases but then rises considerably until around the cloud point. The observed viscosity increase can be explained by the interchain association because of micellar aggregation.     

Side‐chain conformational changes during the thermoshrinking process: γ‐Ray polymerization and spectroscopic study of uncrosslinked poly(methacryloyl‐Ala‐OMe)

Poly(methacryloyl‐L ‐alanine‐methyl ester) (1) has an optically active side chain and consists of thermoshrinking hydrogels upon crosslinking. We synthesized an uncrosslinked polymer of 1 by the γ‐ray polymerization method. For the prepared polymer, variable‐temperature circular dichroism (CD) and ¹H NMR spectra were studied, and we found conformational changes in the optically active side chains during the thermally induced phase transition. Intense CD spectra reveal ordered conformation in the side chain of 1 below the phase transition temperature (∼28 °C). A well‐resolved ¹H NMR spectrum of 1 at 0 °C shows that the conformational angles in the polymer side chain are fixed at low‐energy minima. With increasing temperature, the frozen side chain starts rotating vigorously and takes an unordered orientation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2671–2677, 2000     

The design,synthesis, and nonlinear optical properties of novel X‐type polyurethane containing dicyanovinylnitroresorcinoxy group with enhanced SHG thermal stability

Novel X‐type polyurethane 5 containing 4‐(2′,2′‐dicyanovinyl)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone, was prepared and characterized. Polyurethane 5 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stability up to 280 °C from thermogravimetric analysis with a glass transition temperature (T_g) obtained from differential scanning calorimetry thermogram of around 120 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064‐nm fundamental wavelength is around 6.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 5 °C higher than T_g, and there was no SHG decay below 125 °C due to the partial main chain character of the polymer structure, which is acceptable for NLO device applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Interactions of sodium dodecyl sulfate with acrylamide –N-isopropylacrylamide) statistical copolymer

 Poly(N-isopropylacrylamide) (PNIPAM) precipitates out of water around 32 °C. This critical temperature is raised when hydrophilic acrylamide sequences are present on the polymer chain. We have used neutron scattering to study the structural properties of a statistical copolymer containing acrylamide and N-isopropylacrylamide segments at different temperatures and its interactions with an anionic surfactant, sodium dodecyl sulfate (SDS). At low temperatures, the copolymer behaves as a swollen polymer coil. With an increase in temperature, intermolecular attractions are observed, and close to the critical temperature of the copolymer, microphase separation is observed. Here, the structure consists of dense nodules of hydrophobic sequences stabilized by hydrophilic sequences. In the presence of a small amount of SDS, additional colloidal stability is observed: the nodule size is decreased. At high SDS concentration, the copolymer is completely solubilized at all temperatures studied and the structure of the polymer–surfactant complex resembles the “necklace” structure obtained for the homopolymer PNIPAM–SDS system. Received: 11 November 1999 Accepted: 15 December 1999     

Effects of Surfactants on Phase Transition of Poly(N-isopropylacrylamide) and Poly(N-isopropylacrylamide-co-dimethylaminoethylmethacrylate)

The effect of surfactants on the phase transition of poly(N-isopropylacrylamide) (PNIPAM) and poly(N-isopropylacrylamide-co-dimethylaminoethylmethacrylate) (P(NIPAM-co-DMAEMA)) was extensively investigated by a turbidometry. When the concentration of cetyltrimethyl ammoniumchloride (CTAC) increased from 0.01 to 0.32%, the cloud point of PNIPAM increased from 32 to 38.5°C. When the concentration of sodium dodecyl sulfate (SDS) increased from 0.01 to 0.08%, the cloud point increased from 32.5 to 38°C. The cloud points with SDS were higher than the values obtained with CTAC. In addition, SDS suppressed the temperature sensitivity much more effectively than CTAC did. The adsorption of the ionic surfactants (CTAC, SDS) on the polymer chains may account for the increase in the cloud point. On the other hand, Tween 20 had little effect on the cloud point and the temperature sensitivity of the homopolymer, possible because it is nonionic. The effect of surfactants on the phase transition of P(NIPAM-co-DMAEMA) exhibited a trend similar to the effect on the phase transition of PNIPAM.