Synthesis and properties of α-substituted benzylpyridinium salts as cationic initiators

α-Methylbenzylpyridinium SbF₆ (1a) and α,α-dimethylbenzylpyridinium SbF₆ (1b) were prepared and the effect of α-methyl groups on the active species and the activity of 1a, 1b during the cationic polymerization of glycidyl phenyl ether (GPE) was evaluated. 1b was prepared by the reaction of α,α-dimethylbenzyl alcohol with pyridinium hexafluoroantimonate (2) in several solvents, and the yield depended on the dipole moment of the solvents, although it was poor for the reaction of α,α-dimethylbenzyl chloride with pyridine for the steric hindrance of the α-methyl groups followed by exchange with NaSbF₆. Both 1a and 1b acted as a latent thermal initiator during the cationic polymerization of GPE and 1b showed higher activity during cationic polymerization with the higher steric effect of the α-methyl groups than 1a. The ¹H-NMR analysis of the obtained poly GPE indicated that the active species of 1b changed from the benzyl cation to H⁺, depending on the reaction temperature, although 1a released benzyl cations as active species in the cationic polymerization of GPE. © 1996 John Wiley & Sons, Inc.     

A Convenient Halogenation Procedure for the Preparation of α-Halocarbonyl Compounds

Except for substituted acetophenones (p-Y-C₆H₄COCH₃, Y=H, Br, CH₃O), simple ketones, β-ketoesters and 1,3-diketones reacted smoothly with a preformed homogeneous mixture of hydrochloric acid and potassium permanganate in acetonitrile to give moderate to good yields of the corresponding α-chlorocarbonyl compounds. Mixtures of α-chloro- and α,α-dichlorocarbonyl compounds were obtained for substituted acetophenones. Brominations proceeded similarly with higher yields when the hydrochloric acid was replaced with hydrobromic acid.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

A Novel Method for the Synthesis of α,β‐Unsaturated Amides Mediated by Samarium Diiodide

Promoted by Samarium diiodide (SmI₂), α,β‐unsaturated amides were formed from nitrogen anions (formed in situ by the reduction of nitro compounds) and α,β‐unsaturated esters. This reaction contrasts with the conjugate addition between amines and α,β‐unsaturated esters promoted by samarium triiodide (SmI₃) and provides an alternative attractive way to obtain α,β‐unsaturated amides using SmI₂.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Polymerization of α-methyleneindane: A cyclic analog of α-methylstyrene

α-Methyleniedane (MI), a cyclic analog of α-methylstyrene which does not undergo radical homopolymerization under standard conditions, was synthesized and subjected to radical, cationic, and anionic polymerizations. MI undergoes radical polymerization with α,α′-azobis(isobutyronitrile) in contrast to α-methylstyrene, owing to its reduced steric hindrance, though the polymerization is slow even in bulk. Cationic and anionic polymerization of MI with BF₃OEt₂ and n-butyllithium, respectively, proceed rapidly. The thermal degradation behavior of the polymer depends on the polymerization conditions. The anionic and radical polymers are heteortactic-rich. Reactivity ratios in bulk radical copolymerization on MI (M₂) with methacrylate (MMA, M₁) were determined at 60°C (r₁ = 0.129 and r₂ = 1.07). In order to clarify the copolymerization mechanism, radical copolymerization of MI with MMA was investigated in bulk at temperatures ranging from 50 to 80°C. The Mayo–Lewis equation has been found to be inadequate to describe the result due to depolymerization of MI sequences above 70°C.     

A Simple and Efficient Method for the Synthesis of α,β‐Unsaturated Acyl Azo Compounds with NaNO2‐Acetic Anhydride Under Mild Conditions

In this paper, eight aryl substituted α, β‐unsaturated acyl hydrazides undergo efficient oxidation to α,β‐unsaturated acyl azo compounds using NaNO₂‐acetic anhydride under mild conditions with excellent yields.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Iridium(I)‐catalyzed C−H Borylation of α,β‐Unsaturated Esters with Bis(pinacolato)diboron

A new process has been developed for the iridium(I)‐catalyzed vinylic C?H borylation of α,β‐unsaturated esters with bis(pinacolato)diboron (B₂pin₂). These reactions proceeded in octane at temperatures in the range of 80–120 °C to afford the corresponding alkenylboronic compounds in high yields with excellent regio‐ and stereoselectivities. The presence of an aryl ester led to significant improvements in the yields of the acyclic alkenylboronates. Crossover experiments involving deuterated substrates as well as a mixture of stereoisomers confirmed that this reaction proceeds via a 1,4‐addition/β‐hydride elimination mechanism. Notably, this reaction was also used to develop a one‐pot borylation/Suzuki–Miyaura cross‐coupling procedure.     

Catalytic Asymmetric Intramolecular Homologation of Ketones with α‐Diazoesters: Synthesis of Cyclic α‐Aryl/Alkyl β‐Ketoesters

A catalytic asymmetric intramolecular homologation of simple ketones with α‐diazoesters was firstly accomplished with a chiral N,N′‐dioxide–Sc(OTf)₃ complex. This method provides an efficient access to chiral cyclic α‐aryl/alkyl β‐ketoesters containing an all‐carbon quaternary stereocenter. Under mild conditions, a variety of aryl‐ and alkyl‐substituted ketone groups reacted with α‐diazoester groups smoothly through an intramolecular addition/rearrangement process, producing the β‐ketoesters in high yield and enantiomeric excess.     

Synthesis of Halogenated α,β‐Unsaturated γ‐Butyrolactone Derivatives by Triphenylphosphine‐Catalyzed Cyclization of α‐Halogeno Ketones with Dialkyl Acetylenedicarboxylates (=Dialkyl But‐2‐ynedioates)

A Ph₃P‐catalyzed cyclization of α‐halogeno ketones 2 with dialkyl acetylenedicarboxylates (=dialkyl but‐2‐ynedioates) 3 produced halogenated α,β‐unsaturated γ‐butyrolactone derivatives 4 in good yields (Scheme 1, Table). The presence of electron‐withdrawing groups such as halogen atoms at the α‐position of the ketones was necessary in this reaction. Cyclization of α‐chloro ketones resulted in higher yields than that of the corresponding α‐bromo ketones. Dihalogeno ketones similarly afforded the expected γ‐butyrolactone derivatives in high yields.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Polymerization behavior of 1,2,2,6,6-pentamethyl-4-piperidinyl m-isopropenyl-α,α-dimethylbenzyl carbamate

Copolymers of 1,2,2,6,6-pentamethyl-4-piperidinyl m-isopropenyl-α,α-dimethylbenzyl carbamate (CB) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–CB copolymers made from feed ranging from 0.45–0.94 mole fractions S and MMA-CB copolymers made from feed of 0.34–0.88 mole fractions MMA were used to determine the monomer reactivity ratios r₁ and r₂. The structure of S–CB copolymers was inferred to be mainly of a random nature and in the MMA–CB copolymerization system there is a stronger tendency to form alternating copolymers. © 1993 John Wiley & Sons, Inc.     

Synthesis and Biological Activity of α-Methylene-γ-butyrolactones

α-Methylene-γ-butyrolactones [dihydro-3-methylene-2(3H)furanones] constitute an important group of natural products and possess wide-ranging biological activities. Progress in the synthesis of the heterocycle and the classification of the synthetic methods are not only of practical interest, but also fundamentally important as a current example for the construction of an unusual 1,4-functionality distance and an α-substituted acrylic ester moiety which is susceptible to nucleophilic attack.     

α-Alkyl-α-aminosilanes: Synthesis via Alkylation and Hydrosilylation

The readily available aminomethylsilanes can be utilized to prepare the less available α-alkyl-α-aminosilanes. Versatile t-butoxy-carbonal (Boc) derivatives can be metalated between nitrogen and silicon, and then alkylated by an electrophile at this position. Two alternative procedures were also developed, including an aza-reverse-Brook rearrangement of metalated N-silylcarbamates and hydrosilylation of N-alkenylcarbamates. © 1997 by John Wiley & Sons, Ltd.     

Titanyl Acetylacetonate as an Efficient Catalyst for Regioselective 1,2‐Reduction of α,β‐Unsaturated Carbonyl Compounds and Conversion of α‐Diketones & Acyloins to Vicinal Diols with Sodium Borohydride

α,β‐Unsaturated aldehydes and ketones were reduced readily and exclusively to their corresponding allylic alcohols with NaBH₄ and catalytic amounts of titanyl acetylacetonate at room temperature. Reduction reactions were carried out in CH₃CN or THF. This reducing system was also efficient for the reduction of α‐diketones and acyloins to their corresponding vicinal diols in CH₃CN.