Determination of trace mercury by solid substrate room temperature phosphorescence quenching method based on lead carboxymethyl cellulose (Pb(CMC)(2)) particles containing luminescent salicyl fluorones molecules

Luminescent particles of lead carboxymethyl cellulose (Pb(CMC)₂), which contains salicyl fluorones (THBF), Pb(CMC)₂-THBF, were synthesized by sol-gel method. Pb(CMC)₂-THBF can emit intense and stable solid substrate room temperature phosphorescence (SS-RTP) on filter paper. EDTA can chelate the Pb²⁺ in Pb(CMC)₂-THBF, causing it decompose into aqueous soluble components PbY²⁻, CMC⁻ and THBF, and these components can react with Hg²⁺ to form (CMC)₂Hg-THBF, causing decrease of phosphorescence intensity. Based on the facts above, a new method for the determination of trace mercury by SS-RTP quenching method was established. The linear range of this method is 2.0-40.0 fg spot⁻¹ (5.0-100.0 pg ml⁻¹) of Hg²⁺, with a detection limit (LD) of 0.26 fg spot⁻¹, and the regression equation of working curve is (fg spot⁻¹, 0.4 μl spot⁻¹), r = 0.9994. This method has been applied to the determination of trace mercury in water sample with satisfactory results. The mechanism of SS-RTP emission is also discussed.     

Determination of human IgG by solid substrate room temperature phosphorescence immunoassay based on an antibody labeled with nanoparticles containing dibromofluorescein luminescent molecules

Luminescent silicon dioxide nano-particles with size of 20 nm, which containing dibromofluorescein (D) were synthesized by sol-gel method (symbolized by D-SiO₂).The particles can emit intense and stable room temperature phosphorescence signal on polyamide membrane when Pb(Ac)₂ was used as a heavy atom perturber. The λ_exmax/λ_emmax was 457/622 nm. Our research indicated that the specific immune reaction between goat-anti-human IgG antibody labeled with D-SiO₂ and human IgG could be carried out on polyamide membrane quantitatively, and the phosphorescence intensity of the particle was enhanced after the immunoreactions. Thus a new method of solid substrate room temperature phosphorescence immunoassay (SS-RTP-IA) for the determination of human IgG was established basing on antibody labeled with the D-SiO₂ nanoparticles. The linear range of this method was 0.0624-20.0 pg human IgG spot⁻¹ (corresponding concentration: 0.156-50.0 ng ml⁻¹, the sample volume: 0.40 μl spot⁻¹) with a limit of detection (LD) as 0.018 pg spot⁻¹, and the regression equation of working curve was ΔI_p = 7.201 m_IgG (pg spot⁻¹) + 82.57. Samples containing 0.156 and 50.0 ng ml⁻¹ of IgG were measured repeatedly for 11 times and R.S.D.s were 4.1 and 3.4%, respectively. Results showed that this method had the merits as sensitive, accurate and precise.     

Determination of trace arsenic(V) by catalytic solid substrate-room temperature phosphorescence quenching method

In the H2SO4 medium and in the presence of dodecylbenzene sulfonic acid sodiumsalt (DBS), dimethyl yellow (R) could emit strong and stable solid substrate room temperature phosphorescence (RTP) on filter paper. And NaIO4 could oxidize R to cause the RTP quenching. Arsenic(V) could catalyze the reaction of NaIO4 oxidizing R, which caused the RTP sharply quenching. The reducing value of phosphorescence intensity (△Ip) for the system with DBS is 3.3 times higher than that without DBS. Moreover, the△Ip is proportional to the concentration of As(V). Based on the facts above, a new RTP quenching method for the determination of trace As(V) has been established.     

Determination of naproxen with solid substrate room temperature phosphorimetry based on an orthogonal array design

A solid substrate room temperature phosphorimetric method (SSRTP) for the determination of naproxen in pharmaceutical products was developed. The experimental conditions were optimized by a L₂₅ (5⁶) orthogonal array design (OAD) with five factors at five levels using statistical analysis. The five factors contained pH value of the sample solution, drying time (t_d) and drying temperature (T_d) of solid substrate paper in the oven, concentration (c_I⁻) of heavy atom (I⁻), and exposure time (t_e) of solid substrate paper after being dried. The pH value, t_d, c_I⁻ and t_e had significant influences on the measurement of phosphorescence intensity. The optimization for sample preparation improved greatly the analytical performance of SSRTP. Under the optimal conditions, naproxen can be determined in a linear range from 10 to 400 ng ml⁻¹ with a detection limit of 2.7 ng ml⁻¹ at 3σ. The method has been applied satisfactorily to the determination of naproxen in a commercial product.     

Determination of trace lead by solid substrate room temperature phosphorescence enhancing method based on heavy atom effect and dissoluble manganese supramolecule containing rhodamine 6G luminescent particles

Dissoluble manganese supramolecule containing rhodamine 6G luminescent particles (M2) are synthesized, based on dissoluble manganese supramolecule (M1) doping rhodamine 6G (R.6G), by crystalline method. The particle diameters of M1 and M2 determined by ETM are both of micron degree. M1 and M2 can emit solid substrate room temperature phosphorescence (SS-RTP) on filter paper. The transition probability from the singlet state (S1) to triplet state (T1) of the luminescent molecules was greatly enhanced, based on the increment of luminescent molecules for each spot and the heavy atom effect of certain amount of Pb2+. As a result, the phosphorescence intensity (Ip) of M2 was increased sharply, and the enhancing value of phosphorescence intensity (DeltaIp) is directly proportional to the concentration of Pb2+. Thus, a new method of SS-RTP enhancing for the determination of trace lead is established based on manganese supramolecule containing rhodamine 6G luminescent particles. The linear range of this method is 0.0040-0.400 pg spot-1 of Pb2+ (corresponding concentration, 0.01-1.0 ng mL-1; sample volume, 0.4 microL spot-1), with a detection limit (LD) of 0.0011 pg spot-1 (corresponding concentration, 2.8x10(-12) g mL-1 of Pb2+, n=11). For the working solutions containing 0.0040 and 0.40 ng mL-1 of Pb2+, they were determined repeatedly for seven times, respectively. The R.S.D.s were 3.2 and 3.8%, respectively. This method has good repeatability, sensitivity and high precision. It has been applied to the determination of trace lead in human hair and tea samples with satisfactory results.     

Determination of trace selenium by solid substrate-room temperature phosphorescence enhancing method based on potassium chlorate oxidizing phenyl hydrazine-1,2-dihydroxynaphthalene-3,6-disulfonic acid system

A new method for the determination of trace selenium based on solid substrate-room temperature phosphorimetry (SS-RTP) has been established. This method was based on the fact that in HCl-KCl buffer solution, potassium chlorate could oxidize phenyl hydrazine to form chloridize diazo-ion after being heated at 100 degrees C for 20 min, and then the diazo-ion reacted with 1,2-dihydroxynaphthalene-3,6-disulfonic acid to form red azo-compound which could emit strong room temperature phosphorescence (RTP) signal on filter paper. Selenium could catalyze potassium chlorate oxidizing the reaction between phenyl hydrazine and 1,2-dihydroxynaphthalene-3,6-disulfonic acid, which caused the sharp enhancement of SS-RTP. Under the optimum condition, the relationship between the phosphorescence emission intensity (DeltaIp) and the content of selenium obeyed Beer's law when the concentration of selenium is within the range of 1.60-320 fg spot-1 (or 0.0040-0.80 ng ml-1 with a sample volume of 0.4 microl). The regression equation of working curve can be expressed as DeltaIp=13.12+0.4839CSe(IV) (fg spot-1) (n=6), with correlation coefficient r=0.9991 and a detection limit of 0.28 fg spot-1 (corresponding to a concentration range of 7.0x10(-13) g ml-1 Se(IV), n=11). After 11-fold measurement, R.S.D. were 2.8 and 3.5% for the samples containing 0.0040 and 0.80 ng ml-1 of Se(IV), respectively. This accurate and sensitive method with good repeatability has been successfully applied to the determination of trace selenium in Chinese wolfberry and egg yolk with satisfactory results. The mechanism of the enhancement of phosphorescence was also discussed.     

A highly sensitive coupling technique for the determination of trace quercetin based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting

Al³⁺ could react with quercetin (Q) to form [AlQ]³⁺ complex which could be used as a template for the preparation of poly (vinyl alcohol)–[AlQ]³⁺ complex imprinting (PVA-C-I). The [AlQ]³⁺ not only had good matching ability and selectivity with the cavity of PVA-C-I, but also could react with the fluorescein isothiocyanate anion (FITC⁻) on the outside of cavity by electrostatic interaction to form ion-association complex [AlQ]³⁺·[(FITC)⁻]₃. The ion-association complex could emit strong and stable room temperature phosphorescence (RTP) on polyamide membrane (PAM) and the ΔI_p of the system had linear relationship with the content of Q, showing the highly selective identification of PVA-C-I to Q. Thus, a new coupling technique for the determination of trace Q based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting (PVA-C-I-SSRTP) was established. The linear range and limit of detection (LOD) of this method were 0.010–2.0 (×10⁻¹² g mL⁻¹) and 2.0 × 10⁻¹⁴ g mL⁻¹, respectively, showing wide linear range and high sensitivity of PVA-C-I-SSRTP. This method was used to determine the content of Q in waste water, and the results are consistent with those by spectrofluorimetry. Meanwhile, the mechanism for the determination of Q using PVA-C-I-SSRTP was also discussed.     

Determination of trace mercury by solid substrate-room temperature phosphorimetry based on catalytic effect of Hg(2+) on formation of the ion association complex [Fe(bipy)(3)](2+)[(FinBr(4))(2)](2-)

A new solid substrate-room temperature phosphorimetry method for the determination of trace mercury has been established. It bases on the fact that in acetic acid medium, Hg²⁺ ion can catalyze the substitute reaction of CN⁻ ligand in [Fe(CN)₆]⁴⁻ by 2,2′-bipyridyl (bipy), and the resultant [Fe(bipy)₃]²⁺ cation can react with FinBr₄⁻ anion of tetrabromofluorescein (HFinBr₄) to form ion association complex [Fe(bipy)₃]²⁺[(FinBr₄)₂]²⁻ which can emit phosphorescent signal on filter paper substrate. Under the optimum condition, the linear dynamic range of this method is 1.6-16 fg per spot with a detection limit (LD) of 0.18 fg per spot (0.4 μl sample solution per spot), and the regression equation of working curve is ΔI_p=1.058+7.671 C_Hg²⁺ (fg per spot ), n=7, correlation coefficient is 0.9990. This method has been applied to the determination of trace mercury in hair and cigarette samples with satisfactory result. The reaction mechanism for formation of the ion association complex is also discussed.