Enthalpy characteristics of solution of L-cysteine and L-asparagine in water-alcohol mixtures at 298.15 K

The integral enthalpies of solution Δ_sol H ^m of L-cysteine and L-asparagine in mixtures of water with ethanol, n-propanol, and isopropanol at a mole fraction of alcohol of up to 0.32 were determined by calorimetry of solution. The standard enthalpies of solution (Δ_sol H ⁰) of L-serine and of its transfer (Δ_tr H ⁰) from water to a mixed solvent were calculated. The dependences of Δ_sol H ⁰ and Δ_tr H ⁰ on the composition of water-alcohol mixtures pass through a maximum. The calculated enthalpy coefficients of pair interaction of amino acids with alcohol molecules are positive and increase in the order ethanol, n-propanol, isopropanol. The data obtained were interpreted from the viewpoint of various types of interaction in solution and effect of the amino acid residue on the thermochemical characteristics of solution.     

Microdetermination of acetone in aqueous solution

Diazotized anthranilic acid has been found to be a possible reagent for the spectrophotometric microdetermination of acetone in aqueous solution. The determination range is 10–130 μg/ml. The coefficient of variation does not usually exceed 12% for 60–130 μg of acetone but increases to 2.8% at the 10-μg level. The average relative error for five determinations ranges from ?1.5 to 2%. The molar absorptivity is 9.28 × 10³ liter · mol^?1 · cm^?1 in the presence of starch as a surfactant. Possible reaction path mechanism has been suggested for the colored body formation.     

Monte Carlo structure simulations for aqueous 1,4-dioxane solutions

Monte Carlo simulations in the NpT ensembles have been performed for the structure exploration of aqueous 1,4-dioxane solutions. Three different systems with all-atom dioxane:TIP4P water molar compositions of 2:500 (code:D2), 8:465 (D8), and 17:425 (D17) modeled solutions of 0.22, 0.88, and 1.86 mol/dm3 concentrations, respectively, at T = 298 K and p = 1 atm. The calculated solution densities increase from 0.992 to 1.002 g/cm3 with increasing dioxane concentration and approach the experimentally determined densities within 1%. This close agreement was achieved by utilizing RESP charges fitted to the in-solution IEF-PCM/B3LYP/6-31G* electrostatic potential of dioxane taken in its chair conformation and recently developed C, H steric parameters for ethers for calculations with a 12-6-1 all-atom potential. Solution structure analyses pointed out that the dioxane molecules arrange in the solutions with favorable distances of 4-8 angstroms for the ring symmetry centers. Within this range not only pairs of rings but triangular triads and tetrads have also been observed with center-center distances <8 angstroms. For the D8 system, about 25% of the sampled configurations included such a triad. In the case of the D17 model, two simulations starting from different solution configuration predicted different degrees for the dioxane aggregation in aqueous solution. In the more aggregated structure 3-21 triads are consistently maintained and 1-2 tetrads are formed in 58% of the configurations. Each dioxane oxygen forms about one hydrogen bond, on average, to a water molecule in the 0.22-1.86 molar range. The most likely O(dioxane)...H(water) hydrogen bond distance is 1.75-1.80 angstroms compared to the optimal distance of 1.72 angstroms in the isolated dimer. The optimal dioxane-water interaction energy of -5.65 kcal/mol indicates a remarkable hydrogen-bond acceptor character for dioxane.     

Nitration of phenol in 1,4-dioxane

The nitration of phenol with excess nitric acid in aqueous dioxane, in contrast to the nitration in aqueous ethanol, yields exclusively 2,4-dintrophenol, whereas at equimolar ratio of phenol and nitric acid the major reaction products are mononitrophenols (99%), among which the p-isomer prevails.     

Ab-initio studies on electroosmotic separation: separation of 1,4-dioxane in water solution

A novel technique in membrane separation based on the phenomenon of electroosmosis, recently developed by us [Jain et al., J. Membrane Sci., 78 (1993) 53] has been used to demonstrate the practicability of the phenomenon for the separation of 1,4-dioxane from a dioxane-water mixture. The method shows favourable prospects as a membrane separation process, at least for the separation of close boiling mixtures, provided that the components of the mixture possess a large difference in their dielectric constant values. The analysis of the data indicates that the separation of dioxane increases as the dioxane concentration in the feed solution increases. It is also found that the separation of dioxane increases as the applied electrical potential difference across the membrane increases.     

Photohydroxylation of 1,4-benzoquinone in aqueous solution revisited

In water, photolysis of 1,4-benzoquinone, Q gives rise to equal amounts of 2-hydroxy-1,4-benzoquinone HOQ and hydroquinone QH(2) which are formed with a quantum yield of Phi=0.42, independent of pH and Q concentration. By contrast, the rate of decay of the triplet (lambda(max)=282 and approximately 410 nm) which is the precursor of these products increases nonlinearly (k=(2-->3.8) x 10(6) s(-1)) with increasing Q concentration ((0.2-->10) mM). The free-radical yield detected by laser flash photolysis after the decay of the triplet also increases with increasing Q concentration but follows a different functional form. These observations are explained by a rapid equilibrium of a monomeric triplet Q* and an exciplex Q(2)* (K=5500+/-1000 M(-1)). While Q* adds water and subsequent enolizes into 1,2,4-trihydroxybenzene Ph(OH)(3), Q(2)* decays by electron transfer and water addition yielding benzosemiquinone (.)QH and (.)OH adduct radicals (.)QOH. The latter enolizes to the 2-hydroxy-1,4-semiquinone radical (.)Q(OH)H within the time scale of the triplet decay and is subsequently rapidly (microsecond time scale) oxidized by Q to HOQ with the concomitant formation of (.)QH. On the post-millisecond time scale, that is, when (.)QH has decayed, Ph(OH)(3) is oxidized by Q yielding HOQ and QH(2) as followed by laser flash photolysis with diode array detection. The rate of this pH- and Q concentration-dependent reaction was independently determined by stopped-flow. This shows that there are two pathways to photohydroxylation; a free-radical pathway at high and a non-radical one at low Q concentration. In agreement with this, the yield of Ph(OH)(3) is most pronounced at low Q concentration. In the presence of phosphate buffer, Q* reacts with H(2)PO(4) (-) giving rise to an adduct which is subsequently oxidized by Q to 2-phosphato-1,4-benzoquinone QP. The current view that (.)OH is an intermediate in the photohydroxylation of Q has been overturned. This view had been based on the observation of the (.)OH adduct of DMPO when Q is photolyzed in the presence of this spin trap. It is now shown that Q*/Q(2)* oxidizes DMPO (k approximately 1 x 10(8) M(-1) s(-1)) to its radical cation which subsequently reacts with water. Q*/Q(2)* react with alcohols by H abstraction (rates in units of M(-1) s(-1)): methanol (4.2 x 10(7)), ethanol (6.7 x 10(7)), 2-propanol (13 x 10(7)) and tertiary butyl alcohol ( approximately 0.2 x 10(7)). DMSO (2.7 x 10(9)) and O(2) ( approximately 2 x 10(9)) act as physical quenchers.     

Gas-phase oxidation of 1,4-dioxane

An experimental investigation in a conventional static apparatus of the oxidation of equimolecular mixtures 1,4-dioxane-O₂ has shown that 1,4-dioxane reacts with oxygen more readily than most hydrocarbons. Cool flames and ignitions were observed above 200°C in a pressure range up to 300 torr. The products of the slow reaction and cool flame were analyzed by gas chromatography and GC-MS; the slow reaction gives only CO, CO₂, H₂CO, H₂, C₂H₄, and H₂O. A radical chain mechanism is suggested and discussed by using an evaluation of the rate constants of the possible elementary steps by the methods of thermochemical kinetics.     

Investigations on the structure of dimethyl sulfoxide and acetone in aqueous solution

Aqueous solutions of dimethyl sulfoxide (DMSO) and acetone have been investigated using neutron diffraction augmented with isotopic substitution and empirical potential structure refinement computer simulations. Each solute has been measured at two concentrations-1:20 and 1:2 solute:water mole ratios. At both concentrations for each solute, the tetrahedral hydrogen bonding network of water is largely unperturbed, though the total water molecule coordination number is reduced in the higher 1:2 concentrations. With higher concentrations of acetone, water tends to segregate into clusters, while in higher concentrations of DMSO the present study reconfirms that the structure of the liquid is dominated by DMSO-water interactions. This result may have implications for the highly nonideal behavior observed in the thermodynamic functions for 1:2 DMSO-water solutions.     

Self-assembly and gel formation processes in an aqueous solution of L-cysteine and silver nitrate

The experimental and theoretical study of self-assembly and gel formation processes in an aqueous solution of L-cysteine and silver nitrate (CSS) is performed. A method to obtain CSS-based hydrogel is described. Its characteristic feature is the formation of a spatial gel network at a low concentration of the dispersed phase (～0.01%) and the thixotropic behavior. The experimental examination of this system provides the formulation of a phenomenological model of the gel formation. Based on it, an atomistic computer model is made to verify our assumptions. It is shown that due to the formation of donor-acceptor sulfur-silver bonds there form clusters from silver mercaptide (SM) zwitterions, from which in turn filamentous aggregates form. An analysis of the molecular configurations formed shows that the filamentous aggregates are stabilized by the interaction of 3 ?NH ₃ ⁺ and ?C(O)O^? groups belonging to SM zwitterions in the composition of the neighboring clusters. The obtained conclusions underlie the mesoscopic model based on which we managed to illustrate the processes of generation and growth of filamentous aggregates in large spatial scales.     

Thermal polymerization of N-tert-butylacrylamide in 1,4-dioxane

The kinetics of the thermal polymerization of N-tert-butylacrylamide were investigated in 1,4-dioxane as solvent, in the 65–80°C temperature range. It was found that the overall rate of polymerization which was determined by a gravimetric method is proportional to the 1.9 power of monomer concentration at 70°C. The rate of initiation was determined by ESR spectroscopy using DPPH as an inhibitor, and it was found that the order of initiation rate is 1.8 with respect to monomer concentration at 70°C. The overall activation energy for the thermal polymerization of N-tert-butylacrylamide was found to be 64 ± 9 kJ mol^?1 in the 65–80°C temperature range. The activation energy for the rate of initiation was also determined and it was found to be 90 ± 23 kJ mol^-1.     

Homolytic amination of benzo-1,4-dioxane

When 5,6-benzo-1,4-dioxane was reacted with N,N-dialkylchloramines in the presence of FeSO₄ at 10–20C in a solution of acetic and sulfuric acids, 6-(N,N-dialkylamino)benzo-1,4-dioxanes and 6-chloro- and 6,7-dichloro-benzo-1,4-dioxanes were obtained. Under the conditions used in the study mainly chlorination products were synthesized. Reaction of 5,6-benzo-1,4-dipxane with the system (NH₃OH)₂SO₄-TiCl₃ resulted in the formation of 6-aminobenzo-1,4-dioxane.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 316–318, March, 1989.     

Enthalpies of dissolution of propylene carbonate,acetonitrile, and 1,4-dioxane in mixtures of water with acetone or dimethyl sulfoxide

Enthalpies of dissolution of acetonitrile, propylene carbonate, and 1,4-dioxane in mixtures of water with acetone or DMSO were measured in the whole concentration range of the mixed solvents. Standard enthalpies of dissolution and enthalpies of transfer of solutes from water to its mixtures with acetone or DMSO were determined. In the region of small proportions of the nonaqueous component, the enthalpy of cavity formation in the mixed solvent makes the main contribution to the variation of the enthalpy of dissolution. An increase in the proportion of the nonaqueous component leads to competition between the contributions of cavity formation and specific interaction between the solute and the solvent during solvation.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1747–1752, September, 1995.     

The thermochemical characteristics of solution of phenol and benzoic acid in water-dimethylsulfoxide and water-acetonitrile mixtures

The solution of phenol and benzoic acid in water-dimethylsulfoxide (DMSO) and water-acetonitrile (AN) mixtures was studied. As distinct from benzoic acid, the thermodynamic characteristics of solution of phenol sharply change at concentrations corresponding to a change in the character of cluster formation in water-DMSO and water-AN mixtures. Differences in the solvation of phenol and benzoic acid are explained by different mechanisms of the interaction of the solutes with clusters existing in binary mixtures.     

1,4-二氧六环的光电离解离

采用同步辐射光源、飞行时间质谱和分子束方法研究了1．4-二氧六环的光电离解离过程．由光电离效率曲线得出离子产物的出现势，计算了产物的生成焓．若重分析了m／e=28,29.41等离子碎片的解离通道以及离子碎片的可能结构，提出1、4-二氧六环在光电离解离过程中发生了重排反应     

Determination of 1,4-dioxane in household detergents and cleaners

A possible human carcinogen, 1,4-dioxane, was investigated as to its concentration levels in household detergents and cleaners currently sold in Japan. A solid-phase extraction combined with stable isotope dilution and gas chromatographic/mass spectrometric determination was evaluated for the determination of 1,4-dioxane in household products. The evaluation of the method was performed using a recovery study of 1,4-dioxane-d8 from detergent and cleaner samples. The mean overall recovery and relative standard deviation were 78 and 15%, respectively. The limit of quantitation was 0.05 mg/kg. This method was satisfactorily applied to the determination of 1,4-dioxane in household products. 1,4-Dioxane was detected in 40 out of the 51 investigated samples. The concentrations ranged from 0.05 to 33 mg/kg, and the mean was 2.7 mg/kg. The mean of the products that included anionic surfactants, i.e., alkylpoly(oxyethylene)sulfates, was 7.2 mg/kg, which was higher than the 0.39 mg/kg mean for the other surfactants. Moreover, the 1,4-dioxane load/person was estimated to be 0.061 mg/day/person in Japan, which was 27% of the load from the domestic effluent.     

Synthesis of nucleoside analogs of 1,4-oxathiane, 1,4-dithiane,and 1,4-dioxane

The two regioisomers 6-chloro-9-(1, 4-oxathian-3-yl)-9H-purine ( 5 ) and 6-chloro-9-(1,4-oxathian-2-yl)-9H-purine ( 6 ) were obtained when 3-acetoxy-1,4-oxathiane ( 3 ) was subjected to the acid-catalyzed fusion procedure; compound 3 was prepared by a Pummerer reaction with 1,4-oxathiane 4-oxide ( 2 ). The nucleoside analog 6 could he converted into the adenine derivative 7 and 9-(1,4-oxathian-2-yl)-9H-purine-6(1H)thione ( 8 ). The following nucleoside analogs have also been synthesized: 6-chloro-9-(1,4-dithian-2-yl)-9H-purine ( 13 ), 9-(1,4-dithian-2-yl)adenine ( 14 ), 9-(1,4-dithian-2-yl)-9H-purine-6(1H)thione ( 15 ), and 6-chloro-9-(1,4-dioxan-2-yl)-9H-purine ( 18 ).     

Synthesis of acetylenic derivatives of 1,4-dioxane

Cyclic ketals — 2,5-dimethyl-2,5-bis(4-penten-2-ynyloxy)-1,4-dioxane and 2,5-dimethyl-2,5-bis(3-phenyl-2-propynyloxy)-1,4-dioxane — were isolated in the reaction of propargyl alcohol with vinyl- and phenylethynylcarbinols in the presence of HgO-BF₃.O(C₂H₅)₂ catalytic system.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1029–1030, August, 1986.     

Hybrid Monte Carlo simulations of vertical electronic transitions in acetone in aqueous solution

A simulation of the absorption and the fluorescence of acetone in aqueous solution is reported. The model has an explicit solvent representation with an effective ab initio treatment of the solute. The model attempts to balance quantum chemistry, intermolecular interactions and statistical thermodynamics. It includes a non-electrostatic perturbation on the solute which models the solute–solvent exchange repulsion and the restriction put on the electronic structure of the solute by the antisymmetry to the solvent. The solvent shift to the absorption transition is found to be between 0.16 and 0.21 eV; the shift to the fluorescence transition is found to be between 0.02 and 0.05 eV. The simulation supports the conclusion that the first peak in the fluorescence spectrum of acetone is from a single molecule in equilibrium with the solvent, not from an excimer.     

Kinetics of chloromethylation of benzo-1,4-dioxane

The chloromethylation of benzo-1,4-dioxane in acetic acid in presence of SnCl₄, SbCl₃, ZnCl₂, and SbCl₅ catalysts was investigated. The activation energy of the process was found to be 19.6 kcal/mole. The reaction is zero order in chloride ion and first order in the Hammett acidity function. In excess HCl the reaction is described by a second-order equation. The relative activities of the methyl chlorides in the chloromethylation of benzo-1,4-dioxane were determined.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 459–462, April, 1981.