MnO2/ZSM-5上臭氧协同催化去除甲醛的性能研究

采用浸渍法制备了不同MnO2负载量的催化剂,用BET分析、X射线衍射等手段对其进行了分析,并考察了在MnO2/ZSM-5催化剂上臭氧协同催化去除甲醛的性能.结果显示:相对于单一的MnO2和ZSM-5,MnO2/ZSM-5复合催化剂具有更高的催化活性,其中10%MnO2/ZSM-5性能最佳,一次性去除效率可达到47%左右,制备所得到的催化剂有较强的稳定性,连续工作120h去除效率基本不变.     

Mixed colloidal suspensions of reduced graphene oxide and layered metal oxide nanosheets: useful precursors for the porous nanocomposites and hybrid films of graphene/metal oxide

Homogeneously mixed colloidal suspensions of reduced graphene oxide, or RGO, and layered manganate nanosheets have been synthesized by a simple addition of the exfoliated colloid of RGO into that of layered MnO(2). The obtained mixed colloidal suspensions with the RGO/MnO(2) ratio of ≤0.3 show good colloidal stability without any phase separation and a negatively charged state with a zeta (ζ) potential of -30 to -40?mV. The flocculation of these mixed colloidal suspensions with lithium cations yields porous nanocomposites of Li/RGO-layered MnO(2) with high electrochemical activity and a markedly expanded surface area of around 70-100?m(2) g(-1). Relative to the Li/RGO and Li/layered MnO(2) nanocomposites (≈116 and ≈167?F?g(-1)), the obtained Li/RGO-layered MnO(2) nanocomposites deliver a larger capacitance of approximately 210?F?g(-1) with good cyclability of around 95-97?% up to the 1000th cycle, thus indicating the positive effect of hybridization on the electrode performances of RGO and lithium manganate. Also, an electrophoretic deposition of the mixed colloidal suspensions makes it possible to easily fabricate uniform hybrid films composed of graphene and manganese oxide. The obtained films show a distinct electrochemical activity and a homogeneous distribution of RGO and MnO(2). The present experimental findings clearly demonstrate that the utilization of the mixed colloidal suspensions as precursors provides a facile and universal methodology to synthesize various types of graphene/metal oxide hybrid materials.     

MnOx／Al2O、MnOx／BaO—Al2O3催化剂的制备、表征及其对甲烷低温燃烧的催化活性

改变锰的负载最及前驱体,制备了MnOx/Al2O、MnOx/BaO-Al2O3系列催化剂;采用X-射线衍射（XRD）、程序升温还原（TPR）对催化剂进行表征,并考察了BaO的加入对CH4低温燃烧催化活性的影响。结果表明,用醋酸锰作前驱体与用硝酸锰制备的催化剂相比,其活性组分分散性好、氧中心活性高,催化CH4低温燃烧的活性高。在Al2O3载体中掺入BaO,催化剂的氧中心数目的没有明显变化,但氧中心活性有所下降,因而降低了对CH4低湿燃烧的催化活性。     

Sensitive and selective electrochemical sensing of L-cysteine based on a caterpillar-like manganese dioxide-carbon nanocomposite

A novel one-dimensional (1-D) caterpillar-like manganese dioxide-carbon (MnO(2)-C) nanocomposite has been synthesized by a direct redox reaction between carbon nanotubes (CNTs) and permanganate ions for the first time. The as-prepared nanostructured MnO(2)-C composite mainly consisting of ε-MnO(2) nanoflakes had a unique microstructure, high specific surface area (200 m(2) g(-1)) and favourable conductivity. The nanostructured MnO(2)-C composite, added as a modification to the glassy carbon (GC) electrode via a direct electrochemical co-deposition process with a chitosan hydrogel, was found to exhibit excellent catalytic activity toward L-cysteine electro-oxidation because the specific interaction between the -SH group of L-cysteine and solid MnO(2) occurred to form surface complexes. A determination of L-cysteine at the MnO(2)-C/chitosan/GC (MnO(2)-C/chit/GC) electrode was carried out by amperometric measurement. Under the optimum experimental conditions, the detection response for L-cysteine was fast (within 7 s). The logarithm of catalytic currents shows a good linear relationship with that of the L-cysteine concentration in the range of 0.5-680 μM (R = 0.9986), with a low detection limit of 22 nM. The MnO(2)-C/Chit/GC electrode exhibited excellent stability (without any decrease of the response signal after 1 month) and admirable resistance against interference like glutathione and other oxidizable amino acids (tryptophan, tyrosine, L-lysine and methionine).     

镧掺杂的二氧化锰/碳纳米管电化学超级电容器复合电极

尽管在二氧化锰/多壁碳纳米管（MnO₂/MWCNTs）上获得了较高的比电容,低电导率仍是制约MnO₂担载量或膜厚度提高的主要障碍.另一个问题是MnO₂/MWCNTs的循环稳定性远低于活性炭.所以截止到目前这一新型材料的应用仍然受到很大的限制.本文采用原位还原的方法制备镧掺杂二氧化锰/多壁碳纳米管电化学超级电容器复合电极材料.分别通过透射电镜（TEM）、扫描电镜（SEM）、X射线衍射（XRD）和傅里叶变换红外（FTIR）光谱等技术对这些复合材料的形貌与结构进行了分析.采用循环伏安法、恒电流充放电法和交流阻抗法对其进行了电化学性能的研究.研究结果表明,通过还原MnO₄^-可以在MWCNTs上形成La掺杂MnO₂复合材料.La掺杂降低了复合电极的电阻,这是因为La的引入可以增大MnO₂的晶格缺陷,从而提高材料的电导率以及电极的电化学性能.因此La掺杂是克服MnO₂本征导电性差的有效途径之一.掺杂La可以在不增大电极电阻的情况下提高MnO₂的担载量或膜厚度.La掺杂的更重要的作用是使以MnO₂/MWCNTs作电极的对称电化学超级电容器的循环性能得到显著改善.此外,La掺杂也使复合电极的比电容得到一定程度的提高.     

MnOx/ZrO2催化剂表面氧性能

采用ＸＲＤ，ＴＰＤ和ＴＰＲ等技术研究了ＭｎＯｘ／ＺｒＯ２催化剂的表面特性，结果表明，ＺｒＯ２表面的ＭｎＯｘ物种主要以Ｍｎ２Ｏ３和ＭｎＯ２形态存在，经还原－氧化处理后，ＭｎＯｘ物种的分散状况趋好。Ｍｎ－Ｚｒ之间的相互作用促进ＭｎＯ２的分解，而抑制Ｍｎ２Ｏ３的分解。     

MnO2纳米粒子固载纤维素酶用于高效水解农业废弃物制备生物乙醇

纤维素酶是一种有效的纤维质类物质水解催化剂,工业应用时可通过固定化纤维素酶来降低其成本。本文将烟曲霉原变种JCF产生的纤维素酶固定在MnO2纳米颗粒上。 MnO2可提高纤维素酶的活性,并充当一个更好的载体。采用扫描电镜表征了所制MnO2纳米粒子及其负载纤维素酶的表面性质,以傅里叶变换红外光谱分析了固定在MnO2纳米粒子上纤维素酶的官能团性质。纤维素酶在MnO2纳米粒子上最大的固定化效率为75%。考察了固定化纤维素酶的活性、操作pH值、温度、热稳定性和重复使用性等性质。结果表明,所制固定化酶的稳定性比游离酶更高。固定于MnO2纳米粒子上的纤维素酶可用于纤维质类物质的水解反应,且能在较宽的温度和pH值范围内使用。表征结果证实了该催化剂具有非常高的催化纤维素类物质水解的活性。     

Controlled synthesis, characterization, and catalytic properties of Mn(2)O(3) and Mn(3)O(4) nanoparticles supported on mesoporous silica SBA-15

A method established in the present study has proven to be effective in the synthesis of Mn(2)O(3) nanocrystals by the thermolysis of manganese(III) acetyl acetonate ([CH(3)COCH=C(O)CH(3)](3)-Mn) and Mn(3)O(4) nanocrystals by the thermolysis of manganese(II) acetyl acetonate ([CH(3)COCH=C(O)-CH(3)](2)Mn) on a mesoporous silica, SBA-15. In particular, Mn(2)O(3) nanocrystals are the first to be reported to be synthesized on SBA-15. The structure, texture, and electronic properties of nanocomposites were studied using various characterization techniques such as N2 physisorption, X-ray diffraction (XRD), laser Raman spectroscopy (LRS), temperature-programmed reduction (TPR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The results of powder XRD at low angles show that the framework of SBA-15 remains unaffected after generation of the manganese oxide (MnO(x)) nanoparticles, whereas the pore volume and the surface area of SBA-15 dramatically decreased as indicated by N2 adsorption-desorption. TEM images reveal that the pores of SBA-15 are progressively blocked with MnO(x) nanoparticles. The formation of the hausmannite Mn(3)O(4) and bixbyite Mn(2)O(3) structures was clearly confirmed by XRD. The surface structures of MnO(x) were also determined by LRS, XPS, and TPR. The crystalline phases of MnO(x) were identified by LRS with corresponding out-of-plane bending and symmetric stretching vibrations of bridging oxygen species (M-O-M) of both MnO(x) nanoparticles and bulk MnO(x). We also observed the terminal Mn=O bonds corresponding to vibrations at 940 and 974 cm-1 for Mn(3)O(4)/SBA-15 and Mn(2)O(3)/SBA-15, respectively. These results show that the MnO(x) species to be highly dispersed inside the channels of SBA-15. The nanostructure of the particles was further identified by the TPR profiles. Furthermore, the chemical states of the surface manganese (Mn) determined by XPS agreed well with the findings of LRS and XRD. These results suggest that the method developed in the present study resulted in the production of MnO(x) nanoparticles on mesoporous silica SBA-15 by controlling the crystalline phases precisely. The thus-prepared nanocomposites of MnO(x) showed significant catalytic activity toward CO oxidation below 523 K. In particular, the MnO(x) prepared from manganese acetyl acetonate showed a higher catalytic reactivity than that prepared from Mn(NO(3))2.     

低浓度甲烷甲醇深度氧化Ag/La0.6Sr0.4MnO3催化剂

用柠檬酸溶胶－凝胶法制备钙钛矿型Ｌａ０．６Ｓｒ０．４ＭｎＯ３氧化物,并用Ａｇ对其进行修饰,制得Ａｇ／Ｌａ０．６Ｓｒ０．４ＭｎＯ３系列催化剂。结果表明,６％Ａｇ／Ｌａ０．６Ｓｒ０．４ＭｎＯ３催化剂上甲烷或甲醇氧化转化９５％时的反应温度Ｔ９５可低至７３５Ｋ（对ＣＨ４）或４２１Ｋ（对ＣＨ３ＯＨ）;适量Ａｇ的负载修饰并不改变催化剂基质氧化物Ｌａ０．６Ｓｒ０．４ＭｎＯ３的纳米级钙钛矿型结构;Ａｇ的掺杂诱使催     

Formation and characterization of mononuclear and dinuclear manganese oxide-dioxygen complexes in solid argon

A manganese atom reacts with dioxygen to form the previously characterized MnO 2 molecule in solid argon under UV-visible light irradiation. Subsequent sample annealing allows the dioxygen molecules to diffuse and to react with MnO 2 to give the (eta (2)-O 2)MnO 2 complex, which is characterized to be a side-on bonded peroxo manganese dioxide complex. The manganese tetraoxide MnO 4, which was predicted to be less stable than the (eta (2)-O 2)MnO 2 isomer, was not observed. However, the (eta (2)-O 2)MnO 2 complex reacts with another weakly coordinated dioxygen to give the (eta (2)-O 2)MnO 4 complex via visible light irradiation, in which the manganese tetraoxide is coordinated and stabilized by a side-on bonded O 2 molecule. Manganese dimer reacts with dioxygen to form the cyclic Mn(mu-O) 2Mn cluster spontaneously upon annealing, which further reacts with dioxygen to give the (eta (2)-O 2) 2Mn(mu-O) 2Mn cluster, a side-on bonded disuperoxide complex with a planar D 2 h structure.     

低浓度甲烷甲醇深度氧化Ag/La0.6Sr0.4MnO3催化剂

Ag-modified La0.6Sr0.4MnO3 catalysts were prepared and their catalytic performance for deep oxidation of CH4 and CH3OH at low concentrations were investigated. The results showed that the La0.6Sr0.4MnO3 host catalyst with the perovskite-type nano-crystallite structure displayed considerably high catalytic activity for deep oxidation of CH4 and CH3OH at low concentrations. Ag modification to the La0.6Sr0.4MnO3 host catalyst resulted in significant enhancement of the catalyst activity, making the T95 (the reaction temperature needed for conversion of 95%of CH4 or CH3OH) lowered down to 735K (for CH4) and 421K (for CH3OH) from 813 and 465 K over the Ag-free system under the reaction conditions:0.1MPa,CH4/O2/N2=2/12/86(molar ratio),GHSV=45000 h-1 and CH3OH/O2/N2= 0.2/1.0/98.8 (molar ratio),GHSV=58000 h-1,respectively.The carbon containing product was almost CO2 and the contents of HCHO and CO in the reaction exit gas were both under GC detectable limit in both cases.
The results of spectroscopic characterization indicated that modification by proper amount of Ag-dopant did not change the perovskite structure of the La0.6Sr0.4MnO3 host catalyst as a whole. Interaction of Ag-dopant with the surface of the host catalyst,La0.6Sr0.4MnO3,was in favor of high dispersion of the Ag component at the catalyst surface and led to the oxidation of part of the Mn3+species to Mn4+,resulting in an increase of amounts of the reducible Mnn+ species and a decrease of their reduction temperature. On the other hand, this interaction led also to enhancement of adsorption ability of the catalyst toward O2 at relatively low temperature. High activity of the Ag modified La0.6Sr0.4MnO3 catalyst for CH4 and CH3OH complete oxidation was closely related to high redox-activity of the catalyst and its prominent adsorption-activation ability to O2 at relatively low temperatures.     

Interface synthesis of mesoporous MnO2 and its electrochemical capacitive behaviors

Mesoporous MnO(2) has been synthesized by means of a novel, facile, and template-free method by virtue of a soft interface between CCl(4) and H(2)O without any surfactants or organometallic precursors or ligands. X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy analysis, scanning electron microscopy, and an ASAP2010 autoadsorption analyzer were applied to investigate the composition and microstructure of the as-synthesized MnO(2). The structure characterizations indicated a good mesoporous structure for as-prepared MnO(2) with an adsorption average pore diameter of 9.7 nm, mesoporous volume of 0.58 cm(3) g(-1), and Brunauer-Emmett-Teller specific surface area of 239 m(2) g(-1). Electrochemical properties of the mesoporous MnO(2) were elucidated by cyclic voltammograms, galvanostatic charge-discharge, and electrochemical impedance spectroscopy in 1 M Na(2)SO(4) electrolyte. Electrochemical data analysis demonstrated that as-synthesized MnO(2) had good capacitive behavior due to its unique mesoporous structure. A specific capacitance of ca. 220 F g(-1) could still be delivered for the mesoporous MnO(2) even at a scan rate of 100 mV s(-1).     

Study of the change in the properties of Mn-bentonite by aging

In this paper the structure and properties of fresh manganese(II)-bentonite was compared with that of an old substance. It was concluded that the oxidation state of Mn changed. This did not cause many changes in the scanning electron microscope (SEM) and in the X-ray diffraction (XRD) studies; caused minor changes in the Mn concentration (determined by XRF) and thermoanalytical and electron spectroscopy analysis (ESCA). The change in the oxidation state of manganese was indicated by the colors of the samples, the difference in the surface sites, titration curves, redox potentials, adsorption, and catalytic activity of the fresh and the old Mn-bentonite. Potentiometric titration data were evaluated by a surface complexation model using the FITEQL3.2 computer program. Stability constants of edge charge reactions and the number of aluminol, silanol, and edge sites were calculated. Potentiometric titration data of commercial and freshly made MnO2 were also evaluated; the calculated constants and site numbers were compared with that of found in literature. Catalytic and adsorption activity of the samples were also investigated. It was found that fresh Mn-bentonite does not adsorb valine, while the old one and MnO2 does. Fresh Mn-bentonite does not catalyze the decomposition of H2O2, while the old one, as well as MnO2 does.     

Pt/MnO2纳米结构催化剂的制备与结构表征

采用一种简单的方法合成了Pt/MnO2纳米结构催化剂.通过改变还原时间、反应温度、聚乙烯吡咯烷酮（PVP）的用量、Pt负载量等,研究了反应条件对Pt/MnO2纳米结构催化剂的Pt纳米粒子的粒径大小、粒径分布和分散性影响.并在最佳条件下合成一系列不同载体和Pt负载量的Pt/MnO2纳米结构催化剂.通过X射线衍射（XRD）...     

MnO2-embedded-in-mesoporous-carbon-wall structure for use as electrochemical capacitors

We present an in situ reduction method to synthesize a novel structured MnO(2)/mesoporous carbon (MnC) composite. MnO(2) nanoparticles have been synthesized and embedded into the mesoporous carbon wall of CMK-3 materials by the redox reaction between permanganate ions and carbons. Thermogravimetric analysis (TG), X-ray photoelectron spectrum (XPS), X-ray diffraction (XRD), nitrogen sorption, transmission electron microscopy (TEM), and cyclic voltammetry were employed to characterize these composite materials. The results show that different MnO(2) contents could be introduced into the pores of CMK-3 treated with different concentrations of potassium permanganate aqueous solution, while retaining the ordered mesostructure and larger surface area. Increasing the MnO(2) content did not result in a decrease in pore size from the data of nitrogen sorption isotherms, indicating that MnO(2) nanoparticles are embedded in the pore wall, as evidenced by TEM observation. We obtained a large specific capacitance over 200 F/g for the MnC composite and 600 F/g for the MnO(2), and these materials have high electrochemical stability and high reversibility.     

MnO2电沉积直立碳纳米管制备超级电容器的研究

以直立碳纳米管为基底,以pH=6.0的0.1mol/L Na2SO4 为底液,采用电化学沉积法在0.2 mol/L Mn(CH3COO)2溶液中制备了直立碳纳米管与二氧化锰复合材料。SEM测试结果表明复合材料表面呈现多孔状结构。通过循环伏安,恒流充放电,交流阻抗等电化学方法对复合材料修饰电极进行电容性质测试。实验结果表明,在1mol/L KCl 溶液中,0-0.6V(vs. 银/氯化银参比)电位窗口内此复合材料表现出优良的超电容性能。直立碳纳米管电极的比电容为16 F/g,在碳纳米管表面沉积上二氧化锰修饰层后,此复合材料电极的比电容增大至330 F/g,比电容量大幅提升近20倍。同时扫描200圈后,直立碳纳米管与二氧化锰复合材料的循环伏安曲线变化很小,说明其具有相当好的循环寿命和电容稳定性能。     

纳米MnO_2粉体的固相合成及其电化学性能 (Ⅲ)固相氧化还原反应合成纳米α-MnO_2的性能

纳米材料在光、电、磁方面的特性使其在催化,磁性材料,传感器,医学,生物学等方面有特殊应用．纳米材料比常规电极在电化学性能方面有一定的优越性［１～５］．已成功地合成出多种纳米材料［６,７］．本文采用固相氧化还原反应体系直接合成出纳米αＭｎＯ２,并用Ｘ...     

采用积雪草树叶提取物生物合成二氧化镁纳米粒子负载的铜纳米颗粒用于高效催化还原有机染料和芳香硝基化合物（英文）

本文设计了一个经济、绿色的新型方法,采用积雪草树叶提取物作为自然的还原剂,在不使用稳定剂或表面活性剂的情况下合成了MnO_2纳米粒子负载的Cu纳米颗粒(CuNPs).该合成过程环境友好,且避免使用有毒的还原剂.树叶提取物中的酚羟基将溶液中的Cu~(2+)还原为Cu NPs,后者再稳定在MnO_2 NPs表面.采用X射线衍射、透射电镜、场发射扫描电镜、能量散射谱和红外光谱对所得Cu/MnO_2纳米复合物进行了表征.结果表明,该材料可用作高活性、高效可重复使用的多相催化剂,用于室温水溶液NaBH_4存在下刚果红、罗丹明B和亚甲基蓝,以及硝基化合物,如2,4二硝基苯肼和4-硝基苯酚的催化还原.Cu/MnO_2纳米复合物的高稳定性可使其被分离出来,重复使用数次而活性无明显下降.     

MnO octahedral nanocrystals and MnO@C core-shell composites: synthesis, characterization, and electrocatalytic properties

We present a simple and facile synthesis of MnO octahedral nanocrystals and MnO@C core-shell composite nanoparticles. The synthesis is accomplished by a single-step direct pyrolysis of cetyltrimethylammonium permanganate in specially made Let-lock union cells. The products are characterized by HRSEM, HRTEM, Raman spectroscopy, and cyclic voltammetry (CV). The product consists mainly of octahedral MnO nanocrystals and MnO coated with carbon (MnO@C). The core-shell particles are observed only when the core size is smaller than 150 nm. The shape of the nanocrystals can be controlled by varying parameters such as reaction temperature and duration. As the temperature increases from 600 to 800 degrees C, the octahedral MnO crystals observed are without any carbon shell. The effect of time and temperature on the octahedral MnO nanocrystal formation is described. The electrocatalytic activities of the products are studied for oxygen reduction reaction in aqueous basic medium and are compared with bulk MnO. The MnO nanocrystals and core-shell composites exhibit higher activity than that of bulk MnO.     

The structure and catalytic activity of anatase and rutile titania supported manganese oxide catalysts for selective catalytic reduction of NO by NH3

The structure and catalytic properties of anatase and rutile supported manganese oxide catalysts prepared by impregnation method have been studied by using X-ray diffraction (XRD), laser Raman spectroscopy (LRS), X-ray photoelectron spectroscopy (XPS), H(2) temperature-programmed reduction (H(2)-TPR) and BET surface area measurements combined with activity testing of selective catalytic reduction (SCR) of NO by NH(3). It has been shown that the manganese oxide loadings on the two TiO(2) supports exert great influences on the SCR activity. For the rutile supported manganese oxide catalysts, increasing manganese oxide loading leads to the increase of reducibility of dispersed manganese oxide species and the rate constant k, which reaches a maximum around 9.6 × 10(-6) mol g(Mn)(-1) s(-1) at 0.5 mmol Mn per 100 m(2) TiO(2). When the manganese oxide loading is beyond this value, the existence of amorphous MnO(x) multiple layers will certainly reduce the ratio of manganese oxide species exposed on the surface and the reducibility of dispersed manganese oxide species, resulting in the rapid decrease of rate constant k. The LRS and XPS results have revealed that for the anatase supported manganese oxide catalysts manganese oxide species exist in Mn(+4) as a major species with Mn(+3) species and partially undecomposed Mn-nitrate as the minor species. Under the SCR reaction conditions, Mn(+3) species on anatase are oxidized to Mn(+4) species, inserting in the surface of anatase and promoting the anatase-to-rutile transformation in the surface layers of the anatase support. Since these Mn(4+) cations are actually dispersed on the support with a rutile shell-anatase core structure and its concentration is very near to that of MnO(x)/TiO(2) (R) catalyst, the relation between the rate constant k and the MnO(x) loading on the anatase support is similar to that on the rutile support, and that the rate constant k values for anatase and rutile supported manganese oxide catalysts are very close at the same MnO(x) loading.