基于Nafion-氧化石墨烯复合物/硫堇/纳米金构建过氧化氢传感器的研究

利用Nafion(全氟聚苯乙烯磺酸溶液)-氧化石墨烯复合物、硫堇和纳米金构建了H2O2酶传感器。首先将氧化石墨烯分散在体积分数0.2%Nafion溶液中制得Nafion-氧化石墨烯的复合物,并将其固定在玻碳电极表面,通过静电吸附将带正电荷的硫堇吸附到Nafion-氧化石墨烯复合膜修饰的玻碳电极表面,再利用静电吸附将纳米金修饰于电极上,通过纳米金来固定辣根过氧化物酶从而制得H2O2传感器。用循环伏安法和计时电流法考察该修饰电极的电化学特性。H2O2浓度为5.5×10-6~1.0×10-3mol/L时,酶电极的响应电流值与H2O2的浓度呈良好的线性关系,检出限为1.80×10-6mol/L。     

基于纳米金和硫堇固定酶的过氧化氢生物传感器

在铂电极上自组装一层纳米金(GNs), 构建负电荷的界面, 然后通过金-硫、金-氮共价键合作用和静电吸附作用自组装一层阳离子电子媒介体硫堇(Thio). 再以同样的作用自组装一层GNs和辣根过氧化酶(HRP)的混合物, 最后在电极最外层滴加一层疏水性聚合物壳聚糖(Chit), 由此制备了一种新型的过氧化氢生物传感器. 研究了工作电位、检测底液pH、温度对响应电流的影响, 以及GNs和HRP之间的相互作用, 探讨了传感器的表面形态、交流阻抗、重现性和稳定性. 该传感器的酶催化反应活化能为12.4 kJ/mol, 表观米氏常数为6.5×10^－4 mo/L, 在优化的实验条件下, 所研制的传感器对H₂O₂的线性范围为5.6×10^－5～2.6×10^－3 mol/L, 检出限为1.5×10^－5 mol/L. 应用此方法制备了HRP和葡萄糖氧化酶(GOD)双酶体系葡萄糖生物传感器, 并应用于实验样品葡萄糖含量的测定.     

基于多壁碳纳米管-硫堇/Nafion纳米复合物修饰的人IgG免疫传感器的研究

制备了基于多壁碳纳米管-硫堇/Nafion纳米复合物的人IgG免疫传感器.阻抗谱、循环伏安研究表明,该免疫传感器对人IgG的检测具有优异的性能,其对人免疫球蛋白G(IgG)浓度的定量测定线性范围为1.0 ～ 200μg/L,检出限为0.25 μg/L,线性相关系数R=0.9950.该免疫传感器可用于对人血清中IgG的检...     

基于聚硫堇和纳米金共修饰的过氧化氢生物传感器的研究

用循环伏安法将电子媒介体硫堇电聚合在铂电极上,使其表面形成均匀的带负电的聚合膜层,通过静电吸附作用固定表面带正电荷的辣根过氧化物酶,接着吸附纳米金,然后再利用纳米金吸附固定一层辣根过氧化物酶,制成了新型过氧化氢生物传感器。实验发现,该传感器增加了酶的吸附量,响应快、灵敏度高、稳定性好,对H2O2表现出良好的响应特性。检测范围为5.2×10-7~2.0×10-3mol/L,检出限为1.7×10-7mol/L,并具有抗尿酸、抗坏血酸等干扰的特点。     

纳米金与磁性纳米复合物构建电流型免疫传感器的研究

制备了易于磁性分离、硫堇(Thi)包覆的四氧化三铁(Fe3O4)纳米复合物。通过静电吸附作用,将萘酚(Nafion)、Thi包覆的Fe3O4复合纳米粒子层层修饰到玻碳电极表面,再利用Thi分子中的氨基吸附纳米金,最后固载甲胎蛋白抗体,从而制得灵敏度高、稳定性好的无试剂电流型甲胎蛋白免疫传感器。实验通过透射电子显微镜(TEM)对该复合纳米粒子进行表征,并用循环伏安法考察了电极的电化学特性。结果表明,Fe3O4/Thi复合纳米粒子修饰的电极在实验过程中呈现出良好的氧化还原活性,其检测范围为0.05～20μg/L,检出限为0.03μg/L。     

基于硫堇/碳纳米管修饰金电极的过氧化氢生物传感器

制备了以硫堇(TH)、纳米金(Nano-Au)及多壁碳纳米管(MWNT)修饰的H2O2生物传感器.探讨了工作电位、温度、pH对电极响应的影响,考察了电极的重现性、抗干扰能力及使用寿命.该传感器具有线性范围宽、检出限低、灵敏度高、稳定性好和抗干扰能力强等特点.其线性范围为7.0×10-7～4.0×10-3 mol/L;检出限为2.3×10-7 mol/L;灵敏度为0.13 A/(mol L-1 cm2);达到稳定电流所用时间《9 s.米氏常数为0.62 mmol/L,表明所固定的酶具有较高的生物活性.     

基于聚硫堇/过氧化氢光电化学敏感界面的胆碱传感器

将胆碱氧化酶固定在具有光电活性的聚硫堇光透电极的表面,利用壳聚糖和戊二醛键合胆碱氧化酶制备了光致电化学胆碱传感器.此传感器基于同时具有光敏和电子受体功能的聚硫堇光电界面,能与胆碱氧化酶催化胆碱反应产生的电子供体(H2O2)发生光致电化学反应的原理,实现了对胆碱的检测.探讨了传感器的光致电化学响应机理、偏压、光强及电解质...     

基于聚硫堇和纳米银固定酶的葡萄糖生物传感器

用循环伏安法将电子媒介体硫堇电聚合在玻碳电极表面上,使其表面形成均匀的带负电的聚硫堇膜,通过静电吸附作用吸附表面带正电荷的纳米银溶胶,接着通过静电吸附带负电的葡萄糖氧化酶,最后用聚硫堇包埋电极,从而制得性能优良的葡萄糖氧化酶(GOD)生物传感器。实验发现传感器氧化峰电流与葡萄糖的浓度在1.0×10-8~5.0×10-6mol/L(r=0.9963)范围内呈良好线性关系,检出限为5.0×10-9mol/L(S/N=3)。     

基于硫堇/碳纳米管修饰电极的新型过氧化氢电化学传感器

基于碳纳米管(CNTs)和硫堇(Th)的协同效应,将辣根过氧化物酶(HRP)通过戊二醛(GA)交联作用固定在硫堇(Th)/CNTs修饰电极上,构造了一种新型酶电极(HRP/GA-Th/CNTs/GC)。CNTs静电吸附正电荷的Th,而Th不仅可以促进电极和酶的氧化还原活性中心之间的电子传递,而且能使CNTs氨基(—NH2)功能化,从而利于HRP的固定。基于HRP/GA-Th/CNTs/GC电极的过氧化氢传感器具有较好的传感性能,且检出限低(0.3μmol.L-1)、响应时间短(5 s内)、抗干扰能力强。     

基于硫堇衍生化自组装膜的丙肝电化学免疫传感器

报道了一种制备电流型免疫传感器的新方法。在金电极表面形成巯基自组装单分子层膜,活化后以共价方式竞争键合硫堇分子和丙肝辣根过氧化酶酶标抗体,制得基于硫堇衍生化自组装膜的丙肝电化学免疫传感器。采用循环伏安法和线性扫描伏安法考察了传感器的组装过程,响应电流的性质,以及传感器对丙肝病毒的响应特性,采用线性扫描伏安法对丙肝抗原进行定量分析,线性范围为3．2—16mg／L;检出限为1．2mg／L;线性相关系数r为0．995。取临床血清进行检测,将结果与临床常用的ELISA法比较,探索了该传感器应用于临床检验的可行性。     

A novel strategy for immobilization of thionine based on calcium carbonate-gold nanoparticles inorganic hybrid composite and its application in hydrogen peroxide sensor

A novel strategy for efficient immobilization of electroactive Thionine(Th)on the gold(Au)electrode surface based on calcium carbonate-gold nanoparticles(CaCO3-AuNPs)inorganic hybrid composite was proposed and conducted by the strong electrostatic interaction between positively charged Th and negatively charged CaCO3-AuNPs composite.The hybrid composite was obtained by the adsorption of AuNPs onto the surface of CaCO3 microspheres through electrostatic interaction.Due to the microporous architecture,large s...     

A novel nonenzymatic sensor based on LaNi0.6Co0.4O3 modified electrode for hydrogen peroxide and glucose

In this paper, LaNi_0.6Co_0.4O₃ (LNC) nanoparticles were synthesized by the sol–gel method, and the structure and morphology of LNC nanoparticles were characterized by X-ray diffraction spectrum, scanning electron microscopy and transmitting electron microscopy. And then, LNC was used to modify carbon paste electrode (CPE) without any adhesive to fabricate hydrogen peroxide and glucose sensor, and the results demonstrated that LNC exhibited strong electrocatalytical activity by cyclic voltammetry and amperometry. In H₂O₂ determination, linear response was obtained in the concentration range of 10 nM–100 μM with a detection limit of 1.0 nM. In glucose determination, there was the linear region of 0.05–200 μM with a detection limit of 8.0 nM. Compared with other reports, the proposed sensor also displayed high sensitivity toward H₂O₂ (1812.84 μA mM⁻¹ cm⁻²) and glucose (643.0 μA mM⁻¹ cm⁻²). Moreover, this prepared sensor was applied to detect glucose in blood serum and hydrogen peroxide in toothpaste samples with satisfied results, indicating its possibility in practical application.     

A novel nonenzymatic hydrogen peroxide sensor based on MnO2/graphene oxide nanocomposite

A new electrocatalyst, MnO₂/graphene oxide hybrid nanostructure was successfully synthesized for the nonenzymatic detection of H₂O₂. The morphological characterization was examined by scanning electron microscopy and transmission electron microscopy. The MnO₂/graphene oxide based electrodes showed high electrochemical activity for the detection of H₂O₂ in alkaline medium. The nonenzymatic biosensors displayed good performance along with low working potential, high sensitivity, low detection limit, and long-term stability, which could be attributed to the high surface area of graphene oxide providing for the deposition of MnO₂ nanoparticles. These results demonstrate that this new nanocomposite with the high surface area and electrocatalytic activity offers great promise for new class of nanostructured electrode for nonenzymatic biosensor and energy conversion applications.     

A facile one-pot interfacial synthesis of Pt nanoparticles/polypyrrole composites and their application for non-enzymatic sensing hydrogen peroxide

Pt nanoparticles (PtNPs)/polypyrole (PPy) composites were successfully prepared through a facile one-pot interfacial polymerization of pyrrole by using H₂PtCl₆ as the oxidant for the first time. The as-prepared PPy was granular particles with particle size within a few hundred nanometers, on which PtNPs (1.7–3.5) nm were homogeneously dispersed. The PtNPs/PPy composites displayed excellent electrocatalytic activity toward redox of H₂O₂. The non-enzyme sensor constructed with PtNPs/PPy composites displayed good sensing ability toward H₂O₂ at ?0.1 V with a significantly high sensitivity of 6056 μAmM^?1cm^?2 and a low detection limit of 1.8 μM (S/N = 3).     

A novel hydrogen peroxide sensor based on Ag nanoparticles electrodeposited on DNA-networks modified glassy carbon electrode

A novel strategy to fabricate hydrogen peroxide (H₂O₂) sensor was developed by electrodepositing Ag nanoparticles (NPs) on a glassy carbon electrode modified with three-dimensional DNA networks. The result of electrochemical experiments showed that such constructed sensor had a favorable catalytic ability to reduction of H₂O₂. The well catalytic activity of the sensor was ascribed to the DNA networks that facilitated the formation and homogenous distribution of small Ag NPs. The resulted sensor achieved 95% of the steady-state current within 2 s and had a 1.7 μM detection limit of H₂O₂.     

Controlled assembly of superparamagnetic iron oxide nanoparticles on electrospun PU nanofibrous membrane: A novel heat-generating substrate for magnetic hyperthermia application

A facile method of fabricating novel heat-generating membranes composed of electrospun polyurethane (PU) nanofibers decorated with superparamagnetic iron oxide nanoparticles (NPs) is reported. Electrospinning was used to produce polymeric nanofibrous matrix, whereas polyol immersion technique allowed in situ assembly of well-dispersed Fe₃O₄ NPs on the nanofibrous membranes without any surfactant, and without sensitizing and stabilizing reagent. The assembly phenomena can be explained by the hydrogen-bonding interactions between the amide groups in the PU matrix and the hydroxyl groups capped on the surface of the Fe₃O₄ NPs. The prepared nanocomposite fibers showed acceptable magnetization value of 33.12 emu/g, after measuring the magnetic hysteresis loops using SQUID. Moreover, the inductive heating property of electrospun magnetic nanofibrous membranes under an alternating current (AC) magnetic field was investigated. We observed a progressive increase in the heating rate with the increase in the amount of magnetic Fe₃O₄ NPs in/on the membranes. The present electrospun magnetic nanofibrous membrane may be a potential candidate as a novel heat-generating substrate for localized hyperthermia cancer therapy.     

Effect of the self-assembly of collagen on crystallisation of calcium carbonate in aqueous solution

In order to investigate how the self-assembly of organic matrix influences crystallisation and growth of inorganic minerals, we selected collagen as the matrix and conducted three experiments of crystallisation of CaCO₃ in different reaction systems: H₂O system, as-assembled collagen fibrils system and self-assembling of collagen system. It is found that (i) the self-assembly process of organic matrix had a remarkable effect on the morphology of inorganic minerals: CaCO₃ crystals formed in the as-assembled collagen fibrils system were global clusters and those formed in the self-assembling of collagen system appeared as interlaced networks and (ii) the organic matrix decided the polymorph of crystals: CaCO₃ crystals were calcite in the H₂O system and appeared vaterite in the collagen system. From this study, we can conclude that the self-assembly of collagen fibrils greatly affect the crystallisation and growth of CaCO₃. Such results are significant in understanding the mechanism of biomineralisation in calcified tissues in general, and useful in the synthesis of biominerals.

(a)?CaCO₃ formed in the as-assembled collagen fibrils system. (b)?CaCO₃ formed in the self-assembling of collagen monomer system.The TEM images of samples obtained in the as-assembled collagen fibrils and self-assembling of collagen monomer system, were observed, respectively. The result shows that crystals CaCO₃ formed in the as-assembled collagen fibrils system were global clusters; crystals CaCO₃ formed in the self-assembling of collagen monomer system appeared interlaced networks.     

Kinetics of the decomposition of calcium carbonate in the presence of Bi2O3

Former studies concerning the formation of the compounds in the pseudobinary systems of Bi₂O₃-MO type (M =Ca, Sr, Ca+Sr) have shown that the reaction which occurs with the highest rate is that between Bi₂O₃ and CaO. In the present work CaCO₃ was used as CaO source. We carried out an investigation of the thermal decomposition of CaCO₃ in the presence of Bi₂O₃ in comparison with the decomposition of pure CaCO₃.The presence of Bi₂O₃ exerts a complex influence on the CaCO₃ decomposition acting on the nucleation as well as on the diffusion of CO₂. The decomposition of the samples with low Bi₂O₃ content follows the mechanism of a contracting sphere. A change from surface nucleation to bulk nucleation is recorded for higher amounts of Bi₂O₃.